High efficient adsorption and storage of iodine on S, N co-doped graphene aerogel

Bimetallic mutual-doping magnetic aerogels for iodine reduction capture and immobilization

Adsorption is considered to be one of the most effective methods to remove radioiodine from the solution. However, developing highly efficient adsorbents and the rapid recovery of the used adsorbents is still a challenge. Here, a series of Cu/Fe3O4 bimetallic mutual-doping magnetic aerogels (Cu/Fe3O4-BMMA) were synthesized. Based on the in-situ bimetallic co-gelation process, the high dispersion of Cu in the aerogel was realized, providing conditions for the efficient elimination of I2. The Fe3+ in the initial gel was reduced to magnetic Fe3O4 during the preparation process, allowing for the quick recovery of the adsorbent through the application of a magnetic field. The adsorption experiments showed that Cu/Fe3O4-BMMA has good I2 adsorption capacity (631.3 mg/g) and fast capture kinetics (equilibrium time < 30 min). In addition, Cu/Fe3O4-BMMA was able to effectively remove trace I2 in the solution from ppm level (1.0 ppm) down to ppb level (≤30 ppb). The adsorbed I2 was converted into stable CuI, avoiding secondary pollution due to desorption. Overall, this study provides a potentially efficient iodine capture material for long-term decay storage of radioactive iodine.

Efficient adsorption of radioactive iodine by covalent organic framework/chitosan aerogel

Radioactive iodine is considered one of the most dangerous radioactive elements in nuclear waste. Therefore, effective capture of radioactive iodine is essential for developing and using nuclear energy to solve the energy crisis. Some materials that have been developed for removing radioactive iodine still suffer from complex synthesis, low removal capacity, and non-reusability. Herein, covalent organic framework (COF)/chitosan (CS) aerogels were prepared using vacuum freeze-drying, and the COF nanoparticles were tightly attached on the green biomass material CS networks. Due to the synergistic effect of both COF and CS, the composite aerogel shows a three-dimensional porous and stable structure in the recycle usage. The COF/CS aerogel exhibits excellent iodine adsorption capacity of 2211.58 mg g-1 and 5.62 g g-1 for static iodine solution and iodine vapor, respectively, better than some common adsorbents. Furthermore, COF/CS aerogel demonstrated good recyclability performance with 87 % of the initial adsorption capacity after 5 cycles. In addition, the interaction between iodine and imine groups, amino groups, and benzene rings of aerogel are the possible adsorption mechanisms. COF/CS aerogel has excellent adsorption properties, good chemical stability, and reusable performance, which is a potential and efficient adsorbent for industrial radioactive iodine adsorption from nuclear waste.

Synthesizing covalent organic frameworks for unprecedented iodine capture performance

Nuclear energy continues to be an important supplier of electricity, but it has problems with waste management and the possibility to leak radioactive material. Iodine, a potentially harmful byproduct of uranium fission, is hazardous to both the environment and human health. Therefore, developing safe, effective, and affordable storage facilities for iodine waste is crucial. Owing to their well-controlled pore structure and substantial certain surface area, covalent organic frameworks (COFs) show promise for the adsorption of radioactive iodine. The newly developed COFs (SJ-COF, YA-COF, and AA-COF) shown amazing properties, including strong thermal and chemical stability, which made them ideal for efficient iodine capture. Notably, the ultrahigh iodine capture capacities of these COFs-8.52 g g-1, 8.12 g g-1 and 7.01 g g-1-were significantly greater than most previously reported materials. And The % removal efficiency for SJ-COF, YA-COF and AA-COF from I2/cyclohexane solutions were 87.9 %, 88.6% and 82.6 % respectively. It is noteworthy that the three COFs have high selectivity, reusability, and iodine retention abilities, maintaining iodine even after five recyclings. Based on the outcomes of the experiments, the adsorption processes of the three COFs were examined, and it was discovered that iodine was bound through physical-chemical adsorption. The findings of our work provide a ground-breaking standard for the removal of nuclear waste and demonstrate the enormous potential of COFs as adaptable porous structures that may be specifically designed to address major environmental concerns.

Efficient Structural Regulation Platform for the Controlled Synthesis of LiFePO4 Cathodes with Shorter Li-Ion Diffusion Paths

The rate performance of lithium iron phosphate (LiFePO4) is mainly limited by its poor electronic conductivity and slow Li-ion diffusion rate. Graphene-based materials are often compounded with LiFePO4 (LFP) to improve their rate performance, mainly because of their excellent electrical conductivity. Unlike most past composite work focusing on the conductive network between LFP and graphene, in this work, we further developed the functionality of graphene-based materials as nanoparticle carriers, where the nitrogen-doping strategy endows graphene with properties that make it an efficient structural regulation platform during the solvothermal process. Compared to reduced graphene oxide, not only does the nitrogen-doped sites confer more nucleation growth sites for LFP on the graphene surface during the solvothermal process, but also the localized formation of an EG-enriched microenvironment helps to further inhibit the in situ growth of LFP along [010]. The efficient structural regulation platform assisted the synthesis of (010)-oriented LFP with a smaller particle size, which further shortens the Li-ion diffusion paths. The optimized LFP composite electrode materials exhibit a discharge-specific capacity of 133.1 mA·h/g at 10C, which exceeds/is comparable to that of previously reported LFP compounded with graphene-based materials. This work broadens the functionality of graphene-based carriers and provides new ideas for the controllable synthesis of nanoparticles.

Self-Assembled Construction of Robust and Super Elastic Graphene Aerogel for High-Efficient Formaldehyde Removal and Multifunctional Application

Simultaneously achieving exceptional mechanical strength and resilience of graphene aerogel (GA) remains a challenge, while GA is an ideal candidate for formaldehyde removal. Herein, flexible polyethyleneimine (PEI) is grafted chemically onto carbon nanotube (CNT) surface, and CNT-PEI@reduced GA (rGA) is fabricated via hydrothermal self-assembly, pre-frozen, and hydrazine reduction process. Introducing CNT-PEI contributes to well-interconnected/robust 3D network construction by connecting reduced graphene oxide (rGO) nanosheets through enhancing cross-linking, while entangled CNT-PEI is intercalated into rGO layers to avoid serious restacking of sheets, producing larger surface area and more formaldehyde adsorption sites. Ultralight CNT-PEI@rGA exhibits extreme high strength (276.37 kPa), reversible compressibility at 90% strain, and structural stability, while FA adsorption capacity reached 568.41 mg g^-1 , ≈3.28 times of rGA, derivable from synergistic chemical-physical adsorption effect. Furthermore, CNT-PEI@rGA is ground into powder for first preparing polyoxymethylene (POM)/CNT-PEI@rGA composite, while formaldehyde emission amount is 69.63%/73.96% lower than that of POM at 60/230 °C. Moreover, CNT-PEI@rGA presents outstanding piezoresistive-sensing and thermal insulation properties, exhibiting high strain sensitivity, wide strain detection range, and long-term durability.

Effects of NO2 aging on bismuth nanoparticles and bismuth-loaded silica xerogels for iodine capture

The capture of long-lived radioactive iodine (129I) from oxidizing off-gasses produced from reprocessing used nuclear fuel is paramount to human health and environmental safety. Bismuth has been investigated as a viable iodine getter but the phase stability of bismuth-based sorbents in an oxidizing environment have not yet been researched. In the current work, bismuth nanoparticle-based sorbents, as free particles (Bi-NPs) and embedded within silica xerogel monoliths made with a porogen (TEO-5), were exposed to I2(g) before and after aging in 1 v/v% NO2 at 150 °C. For unaged sorbents, BiI3 was the dominant phase after iodine capture with 8-30 mass% BiOI present due to native Bi2O3 on the surface of the unaged nanoparticles. After 3 h of aging, 82 mass% of the Bi-NPs was converted to Bi2O3 with only a small amount of iodine captured as BiOI (18 mass%). After aging TEO-5 for 3 h, iodine was captured as both BiI3 (26 %) and BiOI (74 %) and no Bi2O3 was detected.". Additionally, bismuth lining the micrometer-scale pores in the TEO-5 led to enhanced iodine capture. In a subsequent exposure of the sorbents to NO2 (secondary aging), all BiI3 converted to BiOI. Thus, direct capture of iodine as BiOI is desired (over BiI3) to minimize loss of iodine after capture.

In situ growth of UiO-66-NH2 in wood-derived cellulose for iodine adsorption

The capture of radioactive iodine is an inevitable requirement in nuclear industry for environmental protection. Metal-organic frameworks (MOFs) are a new generation of sorbents that have wide applications for iodine adsorption and recovery. Although the loading of MOFs on wood can avoid the drawbacks of the powder form of MOFs in implementation, the dense structure of wood results in the lower loading, even after delignification, which limits the adsorption capacity. Herein, a hierarchically porous UiO-66-NH₂ @WCA composite was fabricated by in-situ synthesis of UiO-66-NH₂ in wood-derived cellulose aerogel (WCA) that was further removed hemicellulose from delignified wood. UiO-66-NH₂ @WCA exhibited a high loading (36 wt%) of UiO-66-NH₂ crystals and a high adsorption capacity of 704 mg/g for iodine vapor and 248 mg/g for iodine aqueous solution. The adsorption behavior in iodine aqueous solution was well predicted by the Freundlich isotherm and pseudo-second-order kinetic model. The adsorption capacity of UiO-66-NH₂ @WCA was highest in solution when the pH was 6, while the ionic strength had little effect. The hydroxyl groups on the WCA matrix had a charge transfer effect with iodine, providing additional sites for iodine capture. Furthermore, a packed column system was applied to demonstrate the excellent recyclability and potential for practical application.

Heteroatom Codoped Graphene: The Importance of Nitrogen

Although graphene has exceptional properties, they are not enough to solve the extensive list of pressing world problems. The substitutional doping of graphene using heteroatoms is one of the preferred methods to adjust the physicochemical properties of graphene. Much effort has been made to dope graphene using a single dopant. However, in recent years, substantial efforts have been made to dope graphene using two or more dopants. This review summarizes all the hard work done to synthesize, characterize, and develop new technologies using codoped, tridoped, and quaternary doped graphene. First, I discuss a simple question that has a complicated answer: When can an atom be considered a dopant? Then, I briefly discuss the single atom doped graphene as a starting point for this review's primary objective: codoped or dual-doped graphene. I extend the discussion to include tridoped and quaternary doped graphene. I review most of the systems that have been synthesized or studied theoretically and the areas in which they have been used to develop new technologies. Finally, I discuss the challenges and prospects that will shape the future of this fascinating field. It will be shown that most of the graphene systems that have been reported involve the use of nitrogen, and much effort is needed to develop codoped graphene systems that do not rely on the stabilizing effects of nitrogen. I expect that this review will contribute to introducing more researchers to this fascinating field and enlarge the list of codoped graphene systems that have been synthesized.

Fabrication of Protonated Two-Dimensional Metal-Organic Framework Nanosheets for Highly Efficient Iodine Capture from Water

Radioactive iodine (¹²⁹I and ¹³¹I), produced or released from nuclear-related activities, posed severe effects on both human health and environment. The efficient removal of radioiodine from aqueous medium and vapor phase is of paramount importance for the sustainable development of nuclear energy. Herein, a metal-organic framework (MOF) nanosheet with a positive charge was constructed for the capture of iodine for the first time. The as-synthesized ultrathin nanosheets, with a thickness of 4.4 ± 0.1 nm, showed a record-high iodine adsorption capacity (3704.08 mg g^-1) from aqueous solution, which is even higher than that from the vapor phase (3510.05 mg g^-1). It can be ascribed to the fully interactions between the extensive accessible active sites on the largely exposed surface of 2D MOF nanosheets and the target pollutants, which also gave rise to fast adsorption kinetics with relative high removal efficiencies in the low concentrations, even in seawater. Moreover, a facile recyclability with fast desorption kinetics can also be achieved for the MOF nanosheets. The excellent iodine removal performance in aqueous solution demonstrated that the electrostatic attraction between MOF nanosheets with a positive charge and the negatively charged triiodide (I₃^-, the dominant form of iodine in aqueous solution) is the driving force in adsorption, which endows the adsorbents with the characteristics of fast adsorption and desorption kinetics. The adsorption mechanism was systematically verified by the studies of ζ potential, Fourier transform infrared, X-ray photoelectron spectroscopy, and Raman spectra.

Comments on the calculation of the standard equilibrium constant using the Langmuir model in Journal of Hazardous Materials 422 (2022) 126863

The calculation of equilibrium constant from the Langmuir model is widely used in the literature. However, the dimensional problem of the equilibrium constant has often been ignored. For example, a recent publication on the strong properties of the new adsorbent for tetracycline. Nevertheless, this used an improper calculation of the standard equilibrium constant, confusing solute and solution. This creates dimension for K₀ obtained from Eq. (13). Unfortunately, K₀ should be dimensionless. In this comment, the origin and background of this kind of error is analyzed and the method for correcting the error is presented. Specifically, we establish a clear relationship between the Langmuir constant (K_L) and the standard equilibrium constant (K₀). We hope this comment clarifies the essence of calculating the standard equilibrium constant by using the Langmuir model, so others avoid the propagation of this kind of error.

Construction of manganese-based metal organic frameworks derived from aromatic dicarboxylic acids and application for the adsorption of iodine

In this work, we selected terephthalic acid or 2-amino-terephthalic acid as ligand, transition metal manganese salt as metal source under the solvothermal conditions to successfully construct two kinds of manganese-based metal-organic frameworks (Mn-MOFs): Mn3(BDC)3(H2O)2 (1) and Mn3(NH2-BDC)3(DMF)4 (2) (H2BDC = terephthalic acid; NH2-BDC = 2-amino terephthalic acid; DMF = N, N-dimethyl formamide). It was characterized by elemental analysis, IR spectrum, thermogravimetric analysis (TG), X-ray powder diffraction (PXRD) and UV-vis absorption spectrum. It was found that the packing structures of compounds 1 and 2 were constructed by the trinuclear Mn3O16 building block and exhibited different spatial structure: compound 1 was a three-dimensional structure, and 2 was a two-dimensional network structure. The iodine adsorption in cyclohexane solution properties of compounds 1 and 2 were investigated. Research results showed that the uncoordinated amino group in the structure of framework compounds has a great influence on the iodine adsorption capacity and compound 2 had good adsorption property and reusability.

Preparation of biologically reduced graphene oxide-based aerogel and its application in dye adsorption

Graphene-based materials have attracted great attention in wastewater treatment due to their excellent adsorbability for refractory pollutants. However, the high cost, environmental pollution during preparation and the separation after adsorption are issues that restricted its widespread application. In this study, biologically reduced graphene oxide was prepared via bacterium Shewanella sp. CF8-6 in 12 h, and a 3D poly(vinyl alcohol)/BRGO aerogel (PVA-GA) was further synthesized using PVA as cross-linker. Results showed that BRGO had smooth surface, low I_D/I_G value (1.26) and smaller layer spacing (0.38 nm), indicating that the reaction process had little damage to GO structure. The prepared PVA-GA had strong mechanical strength and porous network structure, and its BET specific surface area was 59.02 m²/g. Benefit from the excellent structure of PVA-GA, it had good adsorption performance for methylene blue (MB) and Congo red (CR) (with removal rate of 94.62%, 93.97% and adsorption capacity of 135.17 mg/g, 134.24 mg/g at an initial dye concentration of 50 mg/L), and could maintain more than 75% removal rate after 5 cycles. This study developed a relatively mild and green way of graphene-based material synthesis and demonstrated the great potential of PVA-GA as an efficient and safe adsorbent for dye removal from wastewater.

Removal of Radioactive Iodine Using Silver/Iron Oxide Composite Nanoadsorbents

Efficient and cost-effective removal of radioactive iodine (radioiodine) from radioactive contaminated water has become a crucial task, following nuclear power plant disasters. Several materials for removing radioiodine have been reported in the literature. However, most of these materials exhibit some limitations, such as high production cost, slow adsorption kinetics, and poor adsorption capacity. Herein, we present silver/iron oxide nanocomposites (Ag/Fe3O4) for the efficient and specific removal of iodine anions from contaminated water. The Ag/Fe3O4 were synthesized using a modified method and characterized via scanning electron microscopy, transmission electron microscopy, and X-ray diffraction analyses. This adsorbent showed a high adsorption capacity for iodine anions (847 mg/g of the adsorbent) in pure water. Next, Ag/Fe3O4 was applied to the removal of radioiodine, and high removal efficiencies were observed in water. In addition, its desalination capacity was retained in the presence of competitive ions and varied pH. After the adsorption process, Ag/Fe3O4 was easily removed from the water by applying an external magnetic field. Moreover, the same operation can be repeated several times without a significant decrease in the performance of Ag/Fe3O4. Therefore, it is expected that the findings presented in this study will offer a new method for desalinating radioiodine in various aqueous media.

Rapid iodine capture from radioactive wastewater by green and low-cost biomass waste derived porous silicon–carbon composite

The effective and safe capture and storage of radioactive iodine (¹²⁹I or ¹³¹I) are of significant importance during nuclear waste storage and nuclear energy generation. Herein, a porous silicon–carbon (pSi–C) composite derived from paper mill sludge (PMS) is synthesized and used for rapid iodine capture. The influences of the activator type, the impregnation ratio of the paper mill sludge to the activator, carbonization temperature, and carbonization time on the properties of the pSi–C composite are investigated. The pSi–C composite produced in the presence of ZnCl₂ as the activator and at an impregnation ratio of 1 : 1, a carbonization temperature of 550 °C, and a carbonization time of 90 min has a surface area of 762.13 m² g⁻¹. The as-synthesized pSi–C composite exhibits promising iodine capture performance in terms of superior iodine adsorption capacity (q_t) of around 250 mg g⁻¹ and rapid equilibrium adsorption with in 15 min. The devised method is environmentally friendly and inexpensive and can easily be employed for the large-scale production of porous silicon-activated carbon composites with excellent iodine capture and storage from iodine-contaminated water.

The effective and safe capture and storage of radioactive iodine (¹²⁹I or ¹³¹I) are of significant importance during nuclear waste storage and nuclear energy generation.

A series of thiophene- and nitrogen-rich conjugated microporous polymers for efficient iodine and carbon dioxide capture

A series of thiophene- and nitrogen-rich conjugated microporous polymers can be used for high iodine and carbon dioxide capture.

Capture of iodine in solution and vapor phases by newly synthesized and characterized encapsulated Cu2O nanoparticles into the TMU-17-NH2 MOF

The efficient capture and storage of radioactive iodine (¹²⁹I or ¹³¹I) formed during the extensive use of nuclear energy is of paramount importance. Therefore, it is a great deal to design new adsorbents for effectively disposing of iodine from nuclear waste. In this work, a new Cu₂O/TMU-17-NH₂ composite has been prepared by a simple encapsulation of Cu₂O nanoparticles (NPs) into the metal organic framework (MOF) TMU-17-NH₂ for the first time. The as-synthesized Cu₂O/TMU-17-NH₂ was fully characterized in details and the iodine sorption/release capability of the Cu₂O/TMU-17-NH₂ composite has been investigated both in solution and in the vapor phase. According to the FE-SEM images, the Cu₂O/TMU-17-NH₂ was obtained with same morphology to that of the pristine TMU-17-NH₂. The I₂ sorption/release experiments were examined by UV-vis spectroscopy. The optimal iodine sorption was obtained by almost complete removal of iodine with a sorption capacity of about 567 mg/g. Detailed experimental evidence demonstrating that the iodine was captured by chemisorption process. Furthermore, photoluminescence (PL) properties of Cu₂O/TMU-17-NH₂ have also been investigated in which indicate that the Cu₂O/TMU-17-NH₂ composite exhibits stronger emission than the pristine TMU-17-NH₂.

Mechanism of sonication time on structure and adsorption properties of 3D peanut shell/graphene oxide aerogel

A 3D pretreated peanut shell-supported graphene oxide (PPS/GO) aerogel has been facilely prepared through a brief sonication + freeze-shaping technique, avoiding the traditional application of hydrothermal method which suffered from high temperature and long reaction time as well as significant loss of oxygen-containing functional groups. It was then employed to efficient norfloxacin (NOR) removal from aqueous medium. The mechanism of sonication time on the structure and adsorption properties of as-obtained PPS/GO aerogels was emphatically discussed via combining instrumental analyses, batch adsorption experiments and density functional theory (DFT) calculations. Results showed that the 3D PPS/GO aerogel with a decrease in oxygen functional groups and an increase in sp²-derived sp³ hybridization regions was observed as sonication time provided in excess, causing the worse removal efficiency towards NOR. The resulting PPS/GO(5:1) aerogel obtained at sonication of 2 min and GO loading content of 200 mg/(PPS)g exhibited the optimal NOR adsorption capacity (pH 6.2, 228.83 mg g^-1). DFT calculations further identified that the sp³-hybridized areas in PPS/GO aerogel had much lower adsorption energy (ΔE, -6.69 kcal/mol) towards NOR as compared with that of sp²-hybridized zones (-12.45 kcal/mol). In addition, multiple interactions were involved in the adsorption of NOR by 3D PPS/GO aerogel, including electrostatic attraction, H-bonding, π-π conjugation and hydrophobic effect.

Superior nitrogen-doped activated carbon materials for water cleaning and energy storing prepared from renewable leather wastes

The fabrication of nitrogen-doped activated carbons (N-ACs) from leather solid wastes (LSW), a huge underutilized bioresource, by different activation methods was investigated. N-AC prepared by KOH activation (named KNAC) exhibited superior physical and chemical properties with much higher BET surface area (2247 m² g^-1) and more abundant hierarchical micropores than those activated by nano-CaCO₃ (CNAC) or by direct carbonization (NNAC). KOH activation decreased the total nitrogen content in KNAC, but it increased the ratio of surface nitrogen species. KOH activation also significantly promoted the conversion of nitrogen species in the carbon material to pyridinic N. Potential applications of the prepared N-ACs were evaluated, and they were tested as adsorbents to remove phenols from water and as the anodes of lithium batteries. The high surface area, abundant micropores, and plentiful surface pyridinic N guaranteed KNAC a superior nitrogen-doped activated carbon that could serve as an excellent adsorbent to remove phenols (282 mg/g) from waste water as well as an outstanding electrode material with a high and stable charge/discharge capacity (533.54 mAh g^-1 after 150th cycle). The strategy of LSW conversion to versatile N-ACs turns waste into treasure and could promote the sustainable development of our society.

One-step generation of S and N co-doped reduced graphene oxide for high-efficiency adsorption towards methylene blue

S and N co-doped reduced graphene (S–N-rGO) nanohybrids were prepared by a one-step oil bath heating process using glutathione (GSH) as a green and mild co-reduction agent and a S and N source. It can be applied in the field of adsorption for the removal of methylene blue (MB) from aqueous solutions. The efficient adsorption rate of S–N-rGO hybrids for MB (50 mg L⁻¹) was observed with the best even within 2′07′′ from blue solutions into colorless (the mass ratio GO : GSH = 60 : 200). Under this mass ratio, the effects of initial solution pH, temperature, initial concentration and contact time on adsorption towards MB were explored systematically. The results indicated that the adsorption capacity at 275 K could reach up to 598.8 mg g⁻¹, the adsorption behavior followed the pseudo-second-order kinetic model and the equilibrium adsorption data fitted the Langmuir isotherm well. Thermodynamic and kinetic analyses revealed that adsorption is an exothermic, spontaneous and physisorption process.

A novel method was developed to directly generate S and N co-doped reduced graphene oxide for the adsorption of MB.