1
|
Zhao X, Xiao Z, Qiao Z, Zhou J. Insights into the assembly process and properties of regenerated cellulose beads prepared in alkali/urea aqueous solutions. Carbohydr Polym 2024; 338:122184. [PMID: 38763707 DOI: 10.1016/j.carbpol.2024.122184] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2024] [Revised: 04/15/2024] [Accepted: 04/17/2024] [Indexed: 05/21/2024]
Abstract
Taking the perspective of cellulose molecular chain assembly via the "bottom-top" route, we delve into the influence of both the cellulose solution and the coagulation bath on the assembly process and structure of regenerated cellulose beads (RCBs). The results show that cellulose molecular weight, mass fraction, and the presence of surfactant have an impact on RCBs. Contrary to traditional views where the structures of material are determined by solvent-nonsolvent exchange rate, ion-cellulose binding capacity also affects RCBs. Overall, the influence of ions follows the Hofmeister sequence. Kosmotropes promote the assembly of cellulose chains and elementary fibers, leading to "salting out" effects, reduced pore size of RCBs, increased crystallinity, and enhanced mechanical properties. In contrast, chaotropes induce "salting in" effects, resulting in opposite outcomes. The average pore size of RCBs coagulated in NaSCN solution was approximately 15-folds larger than those prepared in sodium citrate solution. Anions have a greater impact than cations, and both "salting out" and "salting in" effects strengthen with concentration. Temperature variations primarily affect solvent and nonsolvent exchange speed during cellulose regeneration. These findings provide new insights into regulating RCBs, enabling tailored performance for different applications.
Collapse
Affiliation(s)
- Xuan Zhao
- College of Chemistry and Molecular Sciences, Hubei Engineering Center of Natural Polymer-based Medical Materials, Wuhan University, Wuhan 430072, China
| | - Zibang Xiao
- College of Chemistry and Molecular Sciences, Hubei Engineering Center of Natural Polymer-based Medical Materials, Wuhan University, Wuhan 430072, China
| | - Zhenyu Qiao
- College of Chemistry and Molecular Sciences, Hubei Engineering Center of Natural Polymer-based Medical Materials, Wuhan University, Wuhan 430072, China
| | - Jinping Zhou
- College of Chemistry and Molecular Sciences, Hubei Engineering Center of Natural Polymer-based Medical Materials, Wuhan University, Wuhan 430072, China.
| |
Collapse
|
2
|
Sun Q, Yu W, Gong M, Ma J, Liu G, Mei T, Luo X. Xanthine oxidase immobilized cellulose membrane-based colorimetric biosensor for screening and detecting the bioactivity of xanthine oxidase inhibitors. Int J Biol Macromol 2024; 275:133450. [PMID: 38944077 DOI: 10.1016/j.ijbiomac.2024.133450] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2023] [Revised: 06/13/2024] [Accepted: 06/24/2024] [Indexed: 07/01/2024]
Abstract
Xanthine oxidase (XO) is a typical target for hyperuricemia and gout, for which there are only three commercial xanthine oxidase inhibitors (XOIs): febuxostat, topiroxostat and allopurinol. However, these inhibitors have problems such as low bioactivity and several side effects. Therefore, the development of novel XOIs with high bioactivity for the treatment of hyperuricemia and gout is urgently needed. In this work we constructed a XO immobilized cellulose membrane colorimetric biosensor (XNCM) by the TEMPO oxidation, amide bond coupling and nitro blue tetrazolium chloride (NBT) loading method. As expected, the XNCM was able to detect xanthine, with high selectivity and sensitivity by colorimetric method with a distinctive color change from yellow to purple, which can be easily observed by the naked-eye in just 8 min without any complex instrumentation. In addition, the XNCM sensor performed screening of 21 different compounds and have been successfully pre-screened out XOIs with biological activity. Most importantly, the XNCM was able to quantitatively detect the IC50 values of two commercial inhibitors (febuxostat and allopurinol). All the results confirmed that the XNCM is a simple and effective tool which can be used for the accelerated screening of XOIs and has the potential to uncover additional XOIs.
Collapse
Affiliation(s)
- Qi Sun
- School of Chemistry and Environmental Engineering, Hubei key Laboratory of Novel Reactor and Green Chemical Technology, Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum, Wuhan Institute of Technology, Wuhan 430205, PR China
| | - Wenlong Yu
- School of Chemistry and Environmental Engineering, Hubei key Laboratory of Novel Reactor and Green Chemical Technology, Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum, Wuhan Institute of Technology, Wuhan 430205, PR China
| | - Mixue Gong
- School of Chemistry and Environmental Engineering, Hubei key Laboratory of Novel Reactor and Green Chemical Technology, Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum, Wuhan Institute of Technology, Wuhan 430205, PR China
| | - Jingfang Ma
- School of Chemistry and Environmental Engineering, Hubei key Laboratory of Novel Reactor and Green Chemical Technology, Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum, Wuhan Institute of Technology, Wuhan 430205, PR China
| | - Genyan Liu
- School of Chemistry and Environmental Engineering, Hubei key Laboratory of Novel Reactor and Green Chemical Technology, Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum, Wuhan Institute of Technology, Wuhan 430205, PR China.
| | - Tao Mei
- Key Laboratory of Polymer Materials, Key Laboratory for the Green Preparation and Application of Functional Materials, School of Materials Science and Engineering, Hubei University, Wuhan 430062, PR China.
| | - Xiaogang Luo
- School of Chemistry and Environmental Engineering, Hubei key Laboratory of Novel Reactor and Green Chemical Technology, Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum, Wuhan Institute of Technology, Wuhan 430205, PR China.
| |
Collapse
|
3
|
Gong Y, Yuan J, Pei Y, Liu S, Luo X. One-step quaternization and macromolecular reconstruction to prepare micro-/nano-porous cellulose beads from homogeneous solution for low-concentration amoxicillin removal. Carbohydr Polym 2023; 315:120985. [PMID: 37230622 DOI: 10.1016/j.carbpol.2023.120985] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2022] [Revised: 03/28/2023] [Accepted: 05/03/2023] [Indexed: 05/27/2023]
Abstract
Designing advanced functional cellulose-based materials by one-step homogeneous preparation technology is a great challenge since cellulose is insoluble in common solvents or difficult to regenerate and shape. Quaternized cellulose beads (QCB) were prepared from a homogeneous solution by one-step cellulose quaternization homogeneous modification and macromolecules' reconstruction technology. Morphological and structural characterizations of QCB were conducted by SEM, FTIR and XPS, etc. The adsorption behavior of QCB was studied using amoxicillin (AMX) as a model molecule. The adsorption of QCB for AMX was multilayer adsorption controlled by both physical adsorption and chemical adsorption. The removal efficiency for 60 mg L-1 AMX reached 98.60 % through electrostatic interaction, and the adsorption capacity reached 30.23 mg g-1. AMX adsorption was almost reversible without loss of binding efficiency after three cycles. This facile and green method may offer a promising strategy for the development of functional cellulose materials.
Collapse
Affiliation(s)
- Yaqi Gong
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Jun Yuan
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Ying Pei
- School of Materials Science and Engineering, Zhengzhou University, No.100 Science Avenue, Zhengzhou City 450001, Henan Province, PR China
| | - Shilin Liu
- School of Materials Science and Engineering, Zhengzhou University, No.100 Science Avenue, Zhengzhou City 450001, Henan Province, PR China; College of Food Science and Technology, Huazhong Agricultural University, Wuhan 430205, Hubei Province, PR China
| | - Xiaogang Luo
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China; School of Materials Science and Engineering, Zhengzhou University, No.100 Science Avenue, Zhengzhou City 450001, Henan Province, PR China.
| |
Collapse
|
4
|
Chen Y, Zhang X, Luo X. Enzyme colorimetric cellulose membrane bioactivity strips based on acetylcholinesterase immobilization for inhibitors preliminary screening. Colloids Surf B Biointerfaces 2023; 223:113184. [PMID: 36739673 DOI: 10.1016/j.colsurfb.2023.113184] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2022] [Revised: 01/25/2023] [Accepted: 01/29/2023] [Indexed: 02/01/2023]
Abstract
To quickly screen the active pharmaceutical ingredient that can be used as acetylcholinesterase inhibitors (AChEIs) to treat Alzheimer's disease, an enzyme colorimetric cellulose membrane bioactivity strip (CBS) was developed for simple and rapid screening of AChEIs. The amino group of acetylcholinesterase (AChE) undergoes Schiff base reaction with the aldehyde group on the oxidized cellulose membranes, then the AChE was covalently cross-linking on the surface of cellulose membranes, enabling the screening based on Ellman's enzyme colorimetric method. When the enzyme activity of AChE was inhibited after incubation with inhibitors, the hydrolysis of S-Acetylthiocholine iodide decreased, consequently, the 5-thio-2-nitrobenzoic acid generated by the reaction with 5,5'-dithiobis (2-nitrobenzoic acid) also decreased, leading to a decreased color intensity. In addition, CBSs had fast chromogenic time, excellent specificity, and extraordinary storage stability. Tacrine and Donepezil were used as representative inhibitors during the detection, while their IC50 and limit of detection were determined. Therefore, our work not only established a platform for effective preliminary screening of AChEIs but also inspired the further development of other cellulose membrane-based biosensors.
Collapse
Affiliation(s)
- Yuqing Chen
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Xinyi Zhang
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Xiaogang Luo
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China; School of Materials Science and Engineering, Zhengzhou University, No.100 Science Avenue, Zhengzhou 450001, Henan Province, PR China.
| |
Collapse
|
5
|
Al Hawash M, Kumar R, Barakat MA. Fabrication of Polyaniline/Graphene Oxide Nanosheet@ Tea Waste Granules Adsorbent for Groundwater Purification. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3840. [PMID: 36364616 PMCID: PMC9654232 DOI: 10.3390/nano12213840] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/15/2022] [Revised: 10/25/2022] [Accepted: 10/27/2022] [Indexed: 06/16/2023]
Abstract
The reuse and separation of nanomaterials from an aquatic solution is always challenging and may cause nanotoxicity if not separated completely. Nanomaterial immobilization on the surface of a macro-size material could be an effective approach to developing an efficient composite for groundwater purification. Herein, polyaniline and graphene oxide nanosheet immobilized granular tea waste (PANI/GO@GTW) has been synthesized to remove the anionic and cationic contaminants from groundwater. The synthesized materials were characterized by SEM, XRD, XPS, and FTIR spectroscopies. The optimization of experimental conditions was tested for bromide (Br−) removal from synthetic water. The results revealed that Br− adsorption behavior onto the synthesized materials was as follows: PANI/GO < PANI/GTW < PANI < PANI/GO@GTW. The optimum removal of Br− ions was observed at pH 3 with 90 min of saturation time. Br− adsorption onto PANI/GO@GTW followed the pseudo-first-order kinetic and Langmuir isotherm model, and electrostatic interaction was involved in the adsorption process. The optimum adsorption of Br− onto PANI/GO@GTW was found to be 26.80 m/g. The application of PANI/GO@GTW on real groundwater treatment demonstrated the effective removal of anion pollutants such as F−, Cl−, Br−, NO3−, and PO43−. This study revealed that PANI/GO@GTW successfully reduced Br− concentrations in synthetic and real groundwater and can be used for large-scale applications.
Collapse
|
6
|
El-Sayed NS, Salama A, Guarino V. Coupling of 3-Aminopropyl Sulfonic Acid to Cellulose Nanofibers for Efficient Removal of Cationic Dyes. MATERIALS (BASEL, SWITZERLAND) 2022; 15:6964. [PMID: 36234302 PMCID: PMC9570761 DOI: 10.3390/ma15196964] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/05/2022] [Revised: 09/29/2022] [Accepted: 10/03/2022] [Indexed: 06/16/2023]
Abstract
A novel anionic nanostructured cellulose derivate was prepared through the coupling of TEMPO-oxidized cellulose nanofibers with 3-aminopropyl sulfonic acid (3-APSA). 3-APSA grafting was variously investigated by FT-IR spectroscopy and transmission electron microscopy (TEM) analysis, confirming a high reaction degree. The surface morphology investigated via scanning electron microscopy (SEM) revealed a more uniform organization of the nanofibers after the 3-APSA coupling, with improvements in terms of fiber packing and pore interconnectivity. This peculiar morphology contributes to improving methylene blue (MB) adsorption and removal efficiency at different operating conditions (pH, initial time, and initial concentration). The results indicated a maximum adsorption capacity of 526 mg/g in the case of 3-APSA grafted nanofibers, over 30% more than that of non-grafted ones (370 mg/g), which confirm a relevant effect of chemical modification on the adsorbent properties of cellulose nanofibers. The adsorption kinetics and isotherms of the current adsorbents match with the pseudo-second-order kinetic and Langmuir isotherm models. This study suggests the use of chemical grafting via 3-APSA is a reliable and facile post-treatment to design bio-sustainable and reusable nanofibers to be used as high-performance adsorbent materials in water pollutant remediation.
Collapse
Affiliation(s)
- Naglaa Salem El-Sayed
- Cellulose and Paper Department, National Research Centre, 33 El-Bohouth St., Dokki, Giza P.O. Box 12622, Egypt
| | - Ahmed Salama
- Cellulose and Paper Department, National Research Centre, 33 El-Bohouth St., Dokki, Giza P.O. Box 12622, Egypt
| | - Vincenzo Guarino
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d’Oltremare, pad.20, V.le Kennedy 54, 80125 Naples, Italy
| |
Collapse
|
7
|
Zhang S, Vanessa C, Khan A, Ali N, Malik S, Shah S, Bilal M, Yang Y, Akhter MS, Iqbal HMN. Prospecting cellulose fibre-reinforced composite membranes for sustainable remediation and mitigation of emerging contaminants. CHEMOSPHERE 2022; 305:135291. [PMID: 35760128 DOI: 10.1016/j.chemosphere.2022.135291] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/11/2022] [Revised: 05/24/2022] [Accepted: 06/07/2022] [Indexed: 06/15/2023]
Abstract
Many environmental pollutants caused by uncontrolled urbanization and rapid industrial growth have provoked serious concerns worldwide. These pollutants, including toxic metals, dyes, pharmaceuticals, pesticides, volatile organic compounds, and petroleum hydrocarbons, unenviably compromise the water quality and manifest a severe menace to aquatic entities and human beings. Therefore, it is of utmost importance to acquaint bio-nanocomposites with the capability to remove and decontaminate this extensive range of emerging pollutants. Recently, considerable emphasis has been devoted to developing low-cost novel materials obtained from natural resources accompanied by minimal toxicity to the environment. One such component is cellulose, naturally the most abundant organic polymer found in nature. Given bio-renewable sources, natural abundance, and impressive nanofibril arrangement, cellulose-reinforced composites are widely engineered and utilized for multiple applications, such as wastewater decontamination, energy storage devices, drug delivery systems, paper and pulp industries, construction industries, and adhesives, etc. Environmental remediation prospective is among the fascinating application of these cellulose-reinforced composites. This review discusses the structural attributes of cellulose, types of cellulose fibrils-based nano-biocomposites, preparatory techniques, and the potential of cellulose-based composites to remediate a diverse array of organic and inorganic pollutants in wastewater.
Collapse
Affiliation(s)
- Shizhong Zhang
- Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an, 223003, China.
| | - ChansaKayeye Vanessa
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa, 25120, Pakistan
| | - Adnan Khan
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa, 25120, Pakistan
| | - Nisar Ali
- Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an, 223003, China
| | - Sumeet Malik
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa, 25120, Pakistan
| | - Sumaira Shah
- Department of Botany, Bacha Khan University, Charsadda, KPK, Pakistan
| | - Muhammad Bilal
- School of Life Science and Food Engineering, Huaiyin Institute of Technology, Huaian, 223003, China.
| | - Yong Yang
- Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an, 223003, China
| | | | - Hafiz M N Iqbal
- Tecnologico de Monterrey, School of Engineering and Science, Monterrey, 64849, Mexico.
| |
Collapse
|
8
|
Sun A, Zhan Y, Feng Q, Yang W, Dong H, Liu Y, Chen X, Chen Y. Assembly of MXene/ZnO heterojunction onto electrospun poly(arylene ether nitrile) fibrous membrane for favorable oil/water separation with high permeability and synergetic antifouling performance. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120933] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/15/2022]
|
9
|
Zhao D, Ye W, Cui W. Fabrication of novel bio-adsorbent and its application for the removal of Cu(II) from aqueous solution. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:29613-29623. [PMID: 34661838 DOI: 10.1007/s11356-021-17013-4] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/12/2021] [Accepted: 10/08/2021] [Indexed: 06/13/2023]
Abstract
As eco-friendly adsorption material, hydroxyapatite (Ca5(PO4)3OH, HA) has been extensively applied to the removal of heavy metal ions. However, separating and recovering of HA powder after the adsorption process limits their application. Alginate-based composite beads (HCA) encapsulated with HA and cellulose were designed to remove Cu(II) from aqueous solution. Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used for characteristic analysis. An extensive discussion in terms of HCA adsorption capacity, effect of various Cu(II) concentration, and analysis of the involved mechanisms of Cu(II) removal on the biosorption. HCA beads showed that the maximum adsorption capacity for Cu(II) of 64.14 mg/g at pH = 5 with 8 h contact time. The Langmuir adsorption isotherm and second-order kinetic model gave the closest fit. HCA beads display good regeneration ability after four cycles and offer potentiality for practical application.
Collapse
Affiliation(s)
- Dianjia Zhao
- Key Laboratory for Green Chemical Process of Ministry of Education, School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, Wuhan, 430073, China.
| | - Wenkang Ye
- Key Laboratory for Green Chemical Process of Ministry of Education, School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, Wuhan, 430073, China
| | - Wenxuan Cui
- Key Laboratory for Green Chemical Process of Ministry of Education, School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, Wuhan, 430073, China
| |
Collapse
|
10
|
Zhang H, Zhong W, Yang Y, Liu G, Luo X. A controllable staining colorimetric method based on carboxylated cellulose membranes for early-warning and semi-quantitative detection of aflatoxins in water. Analyst 2022; 147:2549-2557. [DOI: 10.1039/d1an02355a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A controllable staining colorimetric method was proposed for antibody-free detection of AFs by exploiting controllable electrostatic-staining of CCMs with Hg2+-capped AuNPs.
Collapse
Affiliation(s)
- Heng Zhang
- School of Chemical Engineering and Pharmacy; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No. 206, Guanggu 1st Road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Wenhui Zhong
- School of Chemical Engineering and Pharmacy; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No. 206, Guanggu 1st Road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Yang Yang
- School of Chemical Engineering and Pharmacy; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No. 206, Guanggu 1st Road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Genyan Liu
- School of Chemical Engineering and Pharmacy; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No. 206, Guanggu 1st Road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
| | - Xiaogang Luo
- School of Chemical Engineering and Pharmacy; Key Laboratory of Novel Biomass-based Environmental and Energy Materials in Petroleum and Chemical Industry, Wuhan Institute of Technology, LiuFang Campus, No. 206, Guanggu 1st Road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, PR China
- School of Materials Science and Engineering, Zhengzhou University, No. 100 Science Avenue, Zhengzhou City, 450001, Henan Province, PR China
| |
Collapse
|
11
|
Batool A, Valiyaveettil S. Sequential Removal of Oppositely Charged Multiple Compounds from Water Using Surface-Modified Cellulose. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.1c03847] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Asma Batool
- Department of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543, Singapore
| | - Suresh Valiyaveettil
- Department of Chemistry, National University of Singapore, 3 Science Drive 3, Singapore 117543, Singapore
| |
Collapse
|
12
|
El-Nemr MA, Ismail IM, Abdelmonem NM, El Nemr A, Ragab S. Amination of biochar surface from watermelon peel for toxic chromium removal enhancement. Chin J Chem Eng 2021. [DOI: 10.1016/j.cjche.2020.08.020] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
13
|
Wu H, Hu S, Nie C, Zhang J, Tian H, Hu W, Shen T, Wang J. Fabrication and characterization of antibacterial epsilon-poly-L-lysine anchored dicarboxyl cellulose beads. Carbohydr Polym 2021; 255:117337. [DOI: 10.1016/j.carbpol.2020.117337] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/13/2020] [Revised: 10/26/2020] [Accepted: 10/27/2020] [Indexed: 02/07/2023]
|
14
|
Fabrication of carboxymethyl cellulose and chitosan modified Magnetic alkaline Ca-bentonite for the adsorption of hazardous doxycycline. Colloids Surf A Physicochem Eng Asp 2021. [DOI: 10.1016/j.colsurfa.2020.125730] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
15
|
Onkarappa H, Prakash G, Pujar G, Rajith Kumar C, Latha M, Betageri VS. Hevea brasiliensis mediated synthesis of nanocellulose: Effect of preparation methods on morphology and properties. Int J Biol Macromol 2020; 160:1021-1028. [DOI: 10.1016/j.ijbiomac.2020.05.188] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2020] [Revised: 05/19/2020] [Accepted: 05/22/2020] [Indexed: 12/17/2022]
|
16
|
Mohammadabadi SI, Javanbakht V. Development of hybrid gel beads of lignocellulosic compounds derived from agricultural waste: Efficient lead adsorbents for a comparative biosorption. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.113715] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
17
|
Tang Y, Lin T, Ai S, Li Y, Zhou R, Peng Y. Super and selective adsorption of cationic dyes using carboxylate-modified lignosulfonate by environmentally friendly solvent-free esterification. Int J Biol Macromol 2020; 159:98-107. [DOI: 10.1016/j.ijbiomac.2020.05.037] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2020] [Revised: 04/21/2020] [Accepted: 05/05/2020] [Indexed: 12/11/2022]
|
18
|
Wang L, Yang C, Lu A, Liu S, Pei Y, Luo X. An easy and unique design strategy for insoluble humic acid/cellulose nanocomposite beads with highly enhanced adsorption performance of low concentration ciprofloxacin in water. BIORESOURCE TECHNOLOGY 2020; 302:122812. [PMID: 32007848 DOI: 10.1016/j.biortech.2020.122812] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/06/2019] [Revised: 01/11/2020] [Accepted: 01/13/2020] [Indexed: 06/10/2023]
Abstract
In this work, two plant wastes were reused to fabricate the homogeneous 3D micro-nano porous structured humic acid/cellulose nanocomposite beads (IHA@CB) embedded with insoluble humic acid (IHA) particles. The subtle synthesis method attributed to the homogenous distribution of IHA particles in the cellulose matrix and improved the adsorption performance of IHA@CB for low concentration ciprofloxacin in water. Physical and chemical properties of the beads were characterized by SEM, EDX, XRD, FTIR, and the adsorption process of ciprofloxacin was studied by isotherm, kinetic and dynamic adsorption experiments. The maximum adsorption capacity of IHA@CB on CPX reached 10.87 mg g-1 under 318 K. The dynamic experiments were conducted by adjusting bed height, flow rate, initial concentration and pH values, and the regeneration experiments proved the adsorbent exhibited good repeatability. The adsorption mechanism was revealed that CPX was adsorbed by IHA@CB mainly through cation exchange.
Collapse
Affiliation(s)
- Langrun Wang
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, China
| | - Cong Yang
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, China
| | - Ang Lu
- College of Chemistry and Molecular Sciences, Wuhan University, Wuhan 430072, Hubei Province, China
| | - Shilin Liu
- College of Food Science and Technology, Huazhong Agricultural University, Wuhan 430070, Hubei Province, China; School of Materials Science and Engineering, Zhengzhou University, No. 100 Science Avenue, Zhengzhou City 450001, Henan Province, PR China
| | - Ying Pei
- School of Materials Science and Engineering, Zhengzhou University, No. 100 Science Avenue, Zhengzhou City 450001, Henan Province, PR China
| | - Xiaogang Luo
- School of Chemical Engineering and Pharmacy, Wuhan Institute of Technology, LiuFang Campus, No.206, Guanggu 1st road, Donghu New & High Technology Development Zone, Wuhan 430205, Hubei Province, China; School of Materials Science and Engineering, Zhengzhou University, No. 100 Science Avenue, Zhengzhou City 450001, Henan Province, PR China.
| |
Collapse
|