The source apportionment, pollution characteristic and mobility of Sb in roadside soils affected by traffic and industrial activities

Efficient removal of Sb(III) from wastewater using selenium nanoparticles synthesized by Psidium guajava plant extract

Antimony (Sb) pollution in aquatic ecosystems has emerged as a critical environmental issue on a global scale, emphasizing the urgent need for cost-effective and user-friendly technologies to remove Sb compounds from water sources. In this study, a novel adsorbent, selenium nanoparticles (SeNPs), was synthesized using the aqueous extract of Psidium guajava L. leaves (AEP) for the purpose of eliminating Sb(III) from aqueous solutions. The biosynthesized SeNPs was characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray fluorescence spectrometer (XRF), Fourier Transform-Infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis techniques. Additionally, the removal efficiency of the SeNPs for Sb(III) was systematic investigated under the effects of SeNPs dose, temperature, pH and re-usability. The results of this study showed that the adsorption data fitted well into pseudo-second order model, while the Sips modeling demonstrated a high adsorption capacity (62.7 mg/g) of SeNPs for Sb(III) ions at 303.15 K from aqueous solution. The exothermic enthalpy change of - 22.59 kJ/mol and negative Gibbs free energy change assured the viability of the adsorption process under the considered temperature conditions. Surface functional groups on SeNPs like carboxyl, amide, hydroxyl, carbonyl, and methylene significantly facilitate the adsorption processes. Furthermore, the removal efficiencies of Sb in the two actual Sb mine wastewater samples were remarkably high, achieving nearly to 100% with 1.5 g/L SeNPs within 48 h. This outcome underscores the potential of SeNPs as a highly promising solution for efficiently remediating Sb from aquatic environments, owing to their cost-effectiveness, ease of regeneration, and rapid uptake capabilities.

Managing antimony pollution: Insights into Soil-Plant system dynamics and remediation Strategies

Researchers are increasingly concerned about antimony (Sb) in ecosystems and the environment. Sb primarily enters the environment through anthropogenic (urbanization, industries, coal mining, cars, and biosolid wastes) and geological (natural and chemical weathering of parent material, leaching, and wet deposition) processes. Sb is a hazardous metal that can potentially harm human health. However, no comprehensive information is available on its sources, how it behaves in soil, and its bioaccumulation. Thus, this study reviews more than 160 peer-reviewed studies examining Sb's origins, geochemical distribution and speciation in soil, biogeochemical mechanisms regulating Sb mobilization, bioavailability, and plant phytotoxicity. In addition, Sb exposure effects plant physio-morphological and biochemical attributes were investigated. The toxicity of Sb has a pronounced impact on various aspects of plant life, including a reduction in seed germination and impeding plant growth and development, resulting from restricted essential nutrient uptake, oxidative damages, disruption of photosynthetic system, and amino acid and protein synthesis. Various widely employed methods for Sb remediation, such as organic manure and compost, coal fly ash, biochar, phytoremediation, microbial-based bioremediation, micronutrients, clay minerals, and nanoremediation, are reviewed with a critical assessment of their effectiveness, cost-efficiency, and suitability for use in agricultural soils. This review shows how plants deal with Sb stress, providing insights into lowering Sb levels in the environment and lessening risks to ecosystems and human health along the food chain. Examining different methods like bioaccumulation, bio-sorption, electrostatic attraction, and complexation actively works to reduce toxicity in contaminated agricultural soil caused by Sb. In the end, the exploration of recent advancements in genetics and molecular biology techniques are highlighted, which offers valuable insights into combating Sb toxicity. In conclusion, the findings of this comprehensive review should help develop innovative and useful strategies for minimizing Sb absorption and contamination and thus successfully managing Sb-polluted soil and plants to reduce environmental and public health risks.

Insights into the biogeochemical transformation, environmental impacts and biochar-based soil decontamination of antimony

Every year, a significant amount of antimony (Sb) enters the environment from natural and anthropogenic sources like mining, smelting, industrial operations, ore processing, vehicle emissions, shooting activities, and coal power plants. Humans, plants, animals, and aquatic life are heavily exposed to hazardous Sb or antimonide by either direct consumption or indirect exposure to Sb in the environment. This review summarizes the current knowledge about Sb global occurrence, its fate, distribution, speciation, associated health hazards, and advanced biochar composites studies used for the remediation of soil contaminated with Sb to lessen Sb bioavailability and toxicity in soil. Anionic metal(loid) like Sb in the soil is significantly immobilized by pristine biochar and its composites, reducing their bioavailability. However, a comprehensive review of the impacts of biochar-based composites on soil Sb remediation is needed. Therefore, the current review focuses on (1) the fundamental aspects of Sb global occurrence, global soil Sb contamination, its transformation in soil, and associated health hazards, (2) the role of different biochar-based composites in the immobilization of Sb from soil to increase biochar applicability toward Sb decontamination. The review aids in developing advanced, efficient, and effective engineered biochar composites for Sb remediation by evaluating novel materials and techniques and through sustainable management of Sb-contaminated soil, ultimately reducing its environmental and health risks.

A Modified Model for Quantitative Heavy Metal Source Apportionment and Pollution Pathway Identification

Current source apportionment models have successfully identified emission sources and quantified their contributions. However, when being utilized for heavy metal source apportion in soil, their accuracy needs to be improved, regarding migration patterns. Therefore, this work intended to improve the pre-existing principal component analysis and multiple linear regression with distance (PCA-MLRD) model to effectively locate pollution pathways (traffic emissions, irrigation water, atmospheric depositions, etc.) and achieve a more precise quantification. The dataset of soil heavy metals was collected from a typical area in the Chang-Zhu-Tan region, Hunan, China in 2021. The identification of the contribution of soil parent material was accomplished through enrichment factors and crustal reference elements. Meanwhile, the anthropogenic emission was identified with principal component analysis and GeoDetector. GeoDetector was used to accurately point to the pollution source from a spatial differentiation perspective. Subsequently, the pollution pathways linked to the identified sources were determined. Non-metal manufacturing factories were found to be significant anthropogenic sources of local soil contamination, mainly through rivers and atmospheric deposition. Furthermore, the influence of irrigation water on heavy metals showed a more pronounced effect within a distance of 1000 m, became weaker after that, and then gradually disappeared. This model may offer improved technical guidance for practical production and the management of soil heavy metal contamination.

Fractionation and Characterization of Metallic Elements in Soils in Land Use Systems

Land use has a great impact on soil dynamics. The soils of various land use systems in Central Karakoram have been under immense pressure in the recent past due to certain anthropogenic activities such as land use practices and land use cover changes. These influences have an impact on the spatial distribution of metallic elements (MEs) in the soils of various land uses. Herein, we investigated the occurrence of the MEs, copper (Cu), zinc (Zn), and nickel (Ni), in soils of various land uses such as the permafrost, pasture, forest, and agricultural lands of the Central Karakorum region. The MEs were extracted in exchangeable, adsorbed, organically bound, carbonated, precipitated, and residual forms. The concentrations of MEs showed a significant dependence on the extraction method used, and the extraction trend followed the order of EDTA > HNO3 > KNO3 > NaOH > H2O. Zn showed the highest concentration compared to Ni and Cu in all extractions, whereas the land uses' ME concentration followed the order of agricultural land > permafrost > forest > pasturelands. The highest values of total Zn, Ni, and Cu were 712 ± 01 mg/kg, 656 ± 02 mg/kg, and 163 ± 02 mg/kg, respectively, in agricultural soil. The ME concentration showed significant variations between different land uses, and the highest concentration was noted in agricultural soil. Zn was found to be a dominant ME compared to Ni and Cu. We believe this effort will provide opportunities for scholars to investigate MEs around the globe.

Can antimony contamination in soil undermine the ecological contributions of earthworms?

As antimony (Sb) has been increasingly used in manufacturing industries (e.g., alloy, polymer and electronics industries), Sb contamination in the soil environment becomes widely reported and has drawn growing attention due to the toxicity of Sb to living organisms. Whether soil-dwelling organisms can tolerate Sb toxicity and maintain their ecological functions remains poorly understood. Using a cosmopolitan, ecologically important earthworm species (Eisenia fetida) as an ideal model organism, we examine the effects of Sb on the physiological, molecular and behavioural responses of earthworms to different levels of Sb contamination in soil (0, 10, 50, 100, 250 and 500 mg/kg). We found that earthworms could tolerate heavy Sb contamination (100 mg/kg) by boosting their antioxidant defence (POD and GST) and immune systems (ACP) so that their body weight and survival rate were sustained (c.f. control). However, these systems were compromised under extreme Sb contamination (500 mg/kg), leading to mortality. As such, earthworms exhibited avoidance behaviour to escape from the Sb-contaminated soil, implying the loss of their ecological contributions to the environment (e.g., increase in soil aeration and maintenance of soil structure). By measuring various types of biomarkers along a concentration gradient, this study provides a mechanistic understanding of how earthworms resist or succumb to Sb toxicity. Since extreme Sb contamination in soil (>100 mg/kg) is rarely found in nature, we are optimistic that the health and performance of earthworms are not influenced by Sb in most circumstances, but regular monitoring of Sb in soil is recommended to ensure the integrity and functioning of soil environment. Further studies are recommended to evaluate the long-term impact of Sb in the soil ecosystem through bioaccumulation and trophic transfer among soil-dwelling organisms.

Reduction of Outdoor and Indoor PM2.5 Source Contributions via Portable Air Filtration Systems in a Senior Residential Facility in Detroit, Michigan

Background: The Reducing Air Pollution in Detroit Intervention Study (RAPIDS) was designed to evaluate cardiovascular health benefits and personal fine particulate matter (particulate matter < 2.5 μm in diameter, PM2.5) exposure reductions via portable air filtration units (PAFs) among older adults in Detroit, Michigan. This double-blind randomized crossover intervention study has shown that, compared to sham, air filtration for 3 days decreased 3-day average brachial systolic blood pressure by 3.2 mmHg. The results also showed that commercially available HEPA-type and true HEPA PAFs mitigated median indoor PM2.5 concentrations by 58% and 65%, respectively. However, to our knowledge, no health intervention study in which a significant positive health effect was observed has also evaluated how outdoor and indoor PM2.5 sources impacted the subjects. With that in mind, detailed characterization of outdoor and indoor PM2.5 samples collected during this study and a source apportionment analysis of those samples using a positive matrix factorization model were completed. The aims of this most recent work were to characterize the indoor and outdoor sources of the PM2.5 this community was exposed to and to assess how effectively commercially available HEPA-type and true HEPA PAFs were able to reduce indoor and outdoor PM2.5 source contributions. Methods: Approximately 24 h daily indoor and outdoor PM2.5 samples were collected on Teflon and Quartz filters from the apartments of 40 study subjects during each 3-day intervention period. These filters were analyzed for mass, carbon, and trace elements. Environmental Protection Agency Positive Matrix Factorization (PMF) 5.0 was utilized to determine major emission sources that contributed to the outdoor and indoor PM2.5 levels during this study. Results: The major sources of outdoor PM2.5 were secondary aerosols (28%), traffic/urban dust (24%), iron/steel industries (15%), sewage/municipal incineration (10%), and oil combustion/refinery (6%). The major sources of indoor PM2.5 were organic compounds (45%), traffic + sewage/municipal incineration (14%), secondary aerosols (13%), smoking (7%), and urban dust (2%). Infiltration of outdoor PM2.5 for sham, HEPA-type, and true HEPA air filtration was 79 ± 24%, 61 ± 32%, and 51 ± 34%, respectively. Conclusions: The results from our study showed that intervention with PAFs was able to significantly decrease indoor PM2.5 derived from outdoor and indoor PM2.5 sources. The PAFs were also able to significantly reduce the infiltration of outdoor PM2.5. The results of this study provide insights into what types of major PM2.5 sources this community is exposed to and what degree of air quality and systolic blood pressure improvements are possible through the use of commercially available PAFs in a real-world setting.

Analytical study on heavy metal output fluxes and source apportionment of a non-ferrous smelter in southwest China

Abandoned Pb/Zn smelters are often accompanied by a large amount of smelting slag, which is a serious environmental problem. Previous studies have demonstrated that slag deposits pose an environmental threat even if the smelters are shut down. Herein, a Pb/Zn smelter and its impacted zone in GeJiu, Yunnan, China were selected as the study area. The risk and source apportionment of heavy metals (HMs) in the soil of the impacted zone were systematically studied. Based on the hydrogeological features, the migration path and output fluxes of the HMs released from smelting slag to the impacted zone were investigated. The HM contents (Cd, As, Zn, Pb, and Cu) in the soil substantially exceeded the screening values of the Chinese soil standard (GB15618-2018). Based on the results of the Pb isotopic and statistical analyses for source apportionment, the contaminated sites and agricultural irrigation water had a large impact on the HMs of soil. The hydrological analysis results showed that runoff, as an HM migration path under rainfall, continued to affect the environment. The water balance calculations using the Hydrologic Evaluation of Landfill Performance model showed that the rainfall was distributed on site as follows: evaporation (57.35%), runoff (32.63%), and infiltration (10.02%). Finally, the output fluxes were calculated in combination with the leaching experiment. As, Zn, Cd, Pb, and Cu runoff had the output fluxes of 6.1 × 10^-3, 4.2 × 10^-3, 4.1, 1.4 × 10^-2, and 7.2 × 10^-4 mg/kg/y, and infiltration of 1.9 × 10^-3, 1.3 × 10^-3, 1.3, 4.0 × 10^-4, and 2.2 × 10^-4 mg/kg/y, respectively. Therefore, this study offers theoretical and scientific recommendations for effective environmental management and engineering remediation.

Mechanisms of antimony release from lacustrine sediments with increasing temperature

Antimony (Sb) is more mobile in lacustrine sediments with seasonal warming. However, the mechanisms of Sb mobility in sediments are still unclear, especially considering the interactions among Sb, iron (Fe), manganese (Mn), and dissolved organic matter (DOM). In this study, high-resolution dialysis (HR-Peeper) and multi-spectral techniques simultaneously investigated changes in Sb, Fe, Mn, and DOM in two different ecological types (algal and grass) sediments with increasing temperature. We found that the dissolved Sb rapidly increased with the increase in temperature. The oxidation of Sb(III) to Sb(V) by Fe/Mn oxides in oxygen (O₂) rich overlying water and surface sediment layers was one of the reasons for Sb concentration enhancement in pore water. Further, using excitation-emission matrix and parallel factor analysis (EEM-PARAFAC), synchronous fluorescence (SF) spectroscopy, fourier transform infrared (FTIR) spectroscopy, and two-dimensional correlation spectroscopy (2D-COS) revealed that complexation with DOM was the other reasons for Sb concentration increasing in sediments. This was demonstrated by the similar distribution pattern and significant correlation between Sb and tryptophan-like components. Titration experiments further revealed that Sb was more stably bound to tryptophan-like components in the aromatic C-H (660 cm^-1), alcoholic C-O (1115 cm^-1), alkene CC (1615 cm^-1), and carboxylic acid OH (3390 cm^-1) groups. The tryptophan-like components from the algae region had a higher binding force than that from the macrophytes region. Our study effectively promotes an understanding of Sb mobilization in lacustrine sediments.

Accumulation, environmental risk characteristics and associated driving mechanisms of potential toxicity elements in roadside soils across China

Roadside soils may be affected by potential toxicity elements (TPEs) from vehicles; however, pollution status, ecological and health risks of PTEs in roadside soils were rarely reported on national scale. In this study, a dataset of PTEs in roadside soils was compiled based on the literatures published in 2000-2021, and then pollution level, ecological and health risks of PTEs were evaluated using geochemical accumulation index (I_geo), potential ecological risk index (ER), and human risk assessment coupled with Monte Carlo simulation. Driving factors of PTE accumulation in soils were determined by Geo-detector method. Results indicated that Cd exhibited moderate pollution and considerable ecological risk with the highest I_geo of 1.25 and ER of 100.1, respectively. Vehicle ownership (VP) and precipitation (PP) significantly affected accumulation of PTEs, with q values of 0.209 and 0.191 (P < 0.05), respectively. VP paired with PP enhanced nonlinearly PTE accumulation (q = 0.77). Only 6.89% and 1.54% of non-carcinogenic risks for children and adolescent exceeded the threshold of 1, respectively, whereas 93.11%, 95.67%, 58.80% and 58.14% of carcinogenic risks for senior, adults, adolescent, and children surpassed 1E-06, respectively. The results of this study provided valuable implication for managers to design effective strategies for pollution prevent and risk control.

Air Quality Assessment by the Determination of Trace Elements in Lichens (Xanthoria calcicola) in an Industrial Area (Sicily, Italy)

This study provides data on variation in the content of metals and metalloids measured in the lichens (Xanthoria calcicola Oxner) collected in the Syracusan petrochemical complex (Sicily, Italy) which is considered one of the largest in Europe. Concentrations of eighteen trace elements measured in the lichens that were collected from 49 different points were analyzed using an inductively coupled plasma (ICP-MS) device. The concentrations of the typical elements of industrial emissions (As, Cr, Ni, and V) highlight the environmental criticality that exists in the study area. The interpretation of the data in terms of multi-element statistical analysis (FA) and enrichment factor (EFs) proved to be particularly useful in identifying several sources that contribute to the presence of trace elements in the atmospheric particulate between anthropogenic emissions and geogenic emissions. The results of this study reveal the versatility of the lichen species Xanthoria calcicola Oxner in the search for trace elements in highly anthropized environments, so the approach followed in this study can also be applied to other industrial contexts.

Characteristics of iron-containing magnetic particles in household dust from an urban area: A case study in the megacity of Shanghai

In order to characterize the magnetic properties and trace sources of household dust particles, magnetic measurements, geochemical and SEM/TEM analyses were performed on vacuum dust from 40 homes in Shanghai, China. Iron-containing magnetic particles (IMPs) in the household dust were dominated by magnetite, while maghemite, hematite and metallic iron were also present. The IMPs were mainly composed of coarse-grained particles (e.g., >0.1 µm). Ultrafine superparamagnetic (SP) grains (<30 nm) increased proportionately with the abundance of the total IMPs. Household dust had more and coarser IMPs than background soil, but less and finer IMPs than street dust and industrial emissions (coal combustion and metallurgy). Metallic Fe and spherical IMPs, originating from brake wear abrasion and coal combustion, respectively, have been observed using the SEM/TEM. Contents of magnetic particles were positively correlated to Mo, Ni and Sb, while HIRM was associated with As, Mo, Pb and Sb. The multiple lines of evidence including magnetic measurements, geochemical and SEM/TEM analyses suggested that industrial and traffic emissions and street dust were dominant contributors to the IMPs. Such an approach can help to establish more precisely the sources of household dust particles and could be applied to other indoor contexts and further urban environments.

Assessment of heavy metal and metalloid levels and screening potential of tropical plant species for phytoremediation in Singapore

Heavy metal or metalloid contamination is a common problem in soils of urban environments. Their introduction can be due to unpremeditated anthropogenic activities like atmospheric deposition produced by diffuse sources, construction activities and landscape maintenance. Phytoremediation is a rapidly evolving, sustainable approach to remediate the contaminated lands where metals and metalloids are highly persistent in the environment. The present work sets out to determine the level of 12 heavy metals and metalloids (As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sb and Zn) in soil and their accumulation by plant foliage found in nature parks and industrial sites in Singapore. The latter also involve the investigation of the remediation capacity of selected tropical plant species found at the sampling sites. The study is done using digestion and inductively coupled plasma-optical emission spectrometry. Eleven soil sampling sites across Singapore with 300 sampling points were selected, where soil (0-10 cm) and plant foliage samples were collected. Bioconcentration factors were determined to assess the phytoremediation potential of the collected plant species. Toxicity risk of heavy metals were assessed by comparing the target and intervention values from the soil quality guidelines by the Dutch Standard. Results of the study revealed there were regions where levels of heavy metals and metalloids were relatively high and could affect the environment and the health of flora and fauna in Singapore. Our study discovered that there were available tropical plant species (e.g., wildflowers, ferns and shrubs) which could potentially play a significant role in the remediation of contaminated lands that could open up a huge possibility of developing a sustainable and environmentally-friendly way of managing this emerging urban problem. Results showed that 12 plant species, including hyperaccumulator like Pteris vittata, Centella asiatica, were effective for the accumulation of heavy metals and metalloids.

Antimony, beryllium, cobalt, and vanadium in urban park soils in Beijing: Machine learning-based source identification and health risk-based soil environmental criteria

The pollution situation of antimony (Sb), beryllium (Be), cobalt (Co), and vanadium (V) is poorly understood, although they are widely used in daily life and production processes. Moreover, threshold levels ("soil environmental criteria", SEC) for these pollutants are lacking in China, which impedes effective soil quality management. This study explored pollution characteristics for park soils in urban area of Beijing, China at first. Then multivariate statistical analysis and machine learning model were used to identify the main sources of pollutants. Additionally, probabilistic health risk and SEC were studied to assess the risks of pollutants and manage soil pollutants. The results revealed that the overall pollution levels of Be, Co, Sb, and V were low, but Be and Sb were enriched to varying degrees. Source apportionment showed that Sb (85.5%) was mainly derived from fuel combustion and industrial legacy, Co (66.7%) and V (82.5%) from natural processes, and Be from the natural background (39.3%) and anthropogenic sources (53.8%). Risk assessment indicated that the pollutants' carcinogenic and noncarcinogenic risks were negligible. Exposure frequency and soil ingestion rate were the most important parameters affecting health risks. The SEC of Be, Co, Sb, and V were 31, 39.7, 41.3, and 348 mg/kg, respectively, all of which are higher than the corresponding soil quality standards in China, indicating that current soil quality standards may be too conservative for urban park land. This study provides a reference for the management of soil pollutants in Beijing's urban parks, and the formulation of soil environmental quality standards.

Antimony contamination and its risk management in complex environmental settings: A review

Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.

Concentrations of selected trace elements in surface soils near crossroads in the city of Bratislava (the Slovak Republic)

It is well known that road transport emits various trace elements into the environment, which are deposited in soils in the vicinity of roads, so-called roadside soils, and thus contributes to the deterioration of their chemical state. The aim of this work was to determine concentrations of some metals and metalloids (arsenic (As), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb), antimony (Sb), vanadium (V), and zinc (Zn)) in soils from crossroads with traffic signals, which are characterized by deceleration of vehicles and increased emissions of elements related mainly to brake and tyre wear. The results confirmed a moderate enrichment of soils with Cu, Pb, and Zn (enrichment factor (EF) values > 2) and significant enrichment for Sb (EF > 5), while the other elements showed no or minimal enrichment. The age of crossroads proved to have a positive influence on the accumulation of some elements in soils with the largest differences for Cu, Fe, Pb, Sb, and Zn (p < 0.001). Traffic volumes expressed as the average daily traffic intensity (ADTI) also positively influenced soil concentrations of Cr, Cu, Pb, Sb, and Zn, while distance to the crossroad had a significant negative effect on the soil concentration of Cu, Sb, and Zn (p < 0.001). The stable isotopic ratios of Pb, ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb, ranging from 1.1414 to 1.2046 and from 2.0375 to 2.1246, respectively, pointed to the mixed natural-anthropic origin of Pb in the soils of crossroads with a visible contribution of traffic-related sources. Based on the above findings combined with covariance among the studied elements using statistical methods applied to compositionally transformed data, it was possible to show that Cu, Pb, Sb, and Zn clearly originated from road traffic.

Experimental Characterization Protocols for Wear Products from Disc Brake Materials

The increasing interest in the emission from the disc brake system poses new challenges for the characterization approaches used to investigate the particles emitted from the wearing out of the relevant tribological systems. This interest stems from different factors. In the first place, a thorough characterization of brake wear particles is important for a complete understanding of the active tribological mechanisms, under different testing and servicing conditions. This information is an important prerequisite not only for the general improvement of brake systems, but also to guide the development of new materials for discs and brake pads, responding better to the specific requirements, including not only performance, but also the emission behavior. In this review paper, the main material characterization protocols used for the analyses of the brake wear products, with particular regard for the airborne fraction, are presented. Reliable results require investigating the fine and ultrafine particles as concerns their composition together with their structural and microstructural aspects. For this reason, in general, multi-analytical protocols are very much recommended.