Ethylene glycol assisted synthesis of hierarchical Fe-ZSM-5 nanorods assembled microsphere for adsorption Fenton degradation of chlorobenzene

The synergistic effect of adsorption and Fenton oxidation for organic pollutants in water remediation: an overview

Water pollution from industrial sources presents a significant environmental challenge due to the presence of recalcitrant organic contaminants. These pollutants threaten human health and necessitate effective remediation strategies. This article reviewed the synergistic application of adsorption and Fenton oxidation for water treatment. Adsorption, a common technique, concentrates pollutants onto a solid surface, but offers limited degradation. Fenton oxidation, an advanced oxidation process (AOP), utilizes hydroxyl radicals for efficient organic compound breakdown. When adsorption and Fenton oxidation combine, adsorption pre-concentrates pollutants, boosting Fenton oxidation effectiveness. This review delves into the mechanisms and advantages of this integrated approach, highlighting its potential for enhanced removal of organic contaminants. The discussion encompasses the mechanisms of Fenton oxidation and the synergistic effects it has with adsorption. Additionally, various support materials employed in this combined process are explored, including carbon-based supports (activated carbon, graphene, carbon nanotubes and biochar), metal-organic frameworks (MOFs), and clays. Finally, the applicability of this approach to diverse wastewater streams, such as medical and industrial wastewater, is addressed. The review contains 105 references and summarizes the key findings and future perspectives for this promising water remediation technology.

Fe-ZSM-5 zeolite catalyst for heterogeneous Fenton oxidation of 1,4-dioxane: effect of Si/Al ratios and contributions of reactive oxygen species

Heterogeneous Fenton oxidation using traditional catalysts with H2O2 for the degradation of 1,4-dioxane (1,4-DX) still presents challenge. In this study, we explored the potential of Fe-ZSM-5 zeolites (Fe-zeolite) with three Si/Al ratios (25, 100, 300) as heterogeneous Fenton catalysts for the removal of 1,4-DX from aqueous solution. Fe2O3 or ZSM-5 alone provided ineffective in degrading 1,4-DX when combined with H2O2. However, the efficient removal of 1,4-DX using H2O2 was observed when Fe2O3 was loaded on ZSM-5. Notably, the Brønsted acid sites of Fe-zeolite played a crucial role during the degradation of 1,4-DX. Fe-zeolites, in combination with H2O2, effectively removed 1,4-DX via a combination of adsorption and oxidation. Initially, Fe-zeolites demonstrated excellent affinity for 1,4-DX, achieving adsorption equilibrium rapidly in about 10 min, followed by effective catalytic oxidative degradation. Among the Fe-ZSM-5 catalysts, Fe-ZSM-5 (25) exhibited the highest catalytic activity and degraded 1,4-DX the fastest. We identified hydroxyl radicals (·OH) and singlet oxygen (1O2) as the primary reactive oxygen species (ROS) responsible for 1,4-DX degradation, with superoxide anions (HO2·/O2·-) mainly converting into 1O2 and ·OH. The degradation primarily occurred at the Fe-zeolite interface, with the degradation rate constants proportional to the amount of Brønsted acid sites on the Fe-zeolite. Fe-zeolites were effective over a wide working pH range, with alkaline pH conditions favoring 1,4-DX degradation. Overall, our study provides valuable insights into the selection of suitable catalysts for effective removal of 1,4-DX using a heterogeneous Fenton technology.

Embedded Mo/Mn Atomic Regulation for Durable Acidity-Reinforced HZSM-5 Catalyst toward Energy-Efficient Amine Regeneration

Metal-molecular sieve composites with high acidity are promising solid acid catalysts (SACs) for accelerating sluggish CO2 desorption processes and reducing the energy consumption of CO2 chemisorption systems. However, the production of such SACs through conventional approaches such as loading or ion-exchange methods often leads to uncontrolled and unstable metal distribution on the catalysts, which limits their pore structure regulation and catalytic performance. In this study, we demonstrated a feasible strategy for improving the durability, surface chemical activity, and pore structure of metal-doped HZSM-5 through bimetallic Mo/Mn modification. This strategy involves the immobilization of Mo-O-Mn species confined in an MFI structure by regulating MoO42- anions and Mn2+ cations. The embedded Mn/Mo species of low valence can strongly induce electron transfer and increase the density of compensatory H+ on the MoMn@H catalyst, thereby reducing the CO2 desorption temperature by 8.27 °C and energy consumption by 37% in comparison to a blank. The durability enhancement and activity regulation method used in this study is expected to advance the rational synthesis of metal-molecular sieve composites for energy-efficient CO2 capture using amine regeneration technology.

Photo-assisted degradation of Rhodamine B by a heterogeneous Fenton-like process: performance and kinetics

This study presents the degradation of rhodamine B (RhB) by photo Fenton-like (PF-like) process under visible light irradiation (λ > 380 nm) using cobalt phosphate microparticles (CoP-MPs). The effects of the initial concentration of RhB, pH value, CoP-MPs dosage, hydrogen peroxide (H2O2) concentration, and salts found in textile wastewater (such as NaNO3, Na2SO4, and NaCl) were investigated in detail. It was found that CoP-MPs can maintain high catalytic activity with wide pH values varying from 4 to 8. This indicated that the use of CoP-MPs overcame the low efficiency of Fenton-like reaction at neutral and even weakly alkaline pH. The PF-like degradation of RhB followed pseudo-first order kinetics in various conditions. Moreover, a comparison of experimental results showed that the PF-like system has good degradation ability for RhB and methyl blue (MB) solution, but is poor for methyl orange (MO) solution. The repeat experiments indicated that the chemical structures of CoP-MPs were stable. Furthermore, the Co2+ ions leaching to the solutions were measured by an inductively coupled plasma mass spectrometer (ICP-MS). Analysis of UV-vis spectra suggested that RhB was degraded by the formation of a series of N-de-ethylated intermediates followed by cleavage of the whole conjugate chromophore structure.HighlightsRhB can be effectively degraded in the PF-like process under visible light irradiation by CoP-MPs.The PF-like process can maintain high catalytic activity at neutral and even weakly alkaline pH.Degradation kinetics exhibited pseudo-first-order kinetics and were influenced by the key parameters.The variation in the UV-vis spectra of RhB was analyzed in detail to infer a possible degradation pathway.

Nonthermal plasma coupled with liquid-phase UV/Fe-C for chlorobenzene removal

Catalyst poisoning problems limit the application of gas-solid non-thermal plasma (NTP) catalyzed decomposition of chlorinated volatile organic compounds (Cl-VOCs). To mitigate the catalyst deactivation, catalyst iron-loaded activated carbon (Fe-C) was added to the UV-activated liquid phase downstream of the NTP reactor (NTP + UV/Fe-C(L)) for the degradation of chlorobenzene (CB) in this study. The CB removal efficiency and mineralization efficiency (MR) of NTP + UV/Fe-C(L) were up to 94% and 68%, respectively, which were increased by 39% and 30% compared with the single NTP system. Compared with the conventional gas-solid NTP + UV/Fe-C(S) system, the stability of the NTP + UV/Fe-C(L) system was significantly improved due to the dissolved organic intermediates and low residuals on the catalyst surface. Reactive oxygen species ·OH and ·O₂^- dominated the decomposition of CB in the liquid phase, and with the help of UV, much more ·OH and ·O₂^- were produced by Fe-C catalytic O₃. In addition, Fe-C improved the removal of CB by increasing its absorption mass transfer coefficient from 0.0016 to 0.0157 s^-1. The degradation pathway of CB in the NTP + UV/Fe-C(L) system was proposed based on the detected organic intermediates. Overall, this study provides a new tactic to solve the catalyst poisoning problem in the NTP catalytic oxidation of Cl-VOCs.

Adsorption-enforced Fenton-like process using activated carbon-supported iron oxychloride catalyst for wet scrubbing of airborne dichloroethane

Wet scrubbing is a low-cost process for disposing of air pollutants. Nevertheless, this method is rarely used for the treatment of volatile organic compounds (VOCs) because of their poor water solubility. In this study, we used a unique wet scrubbing system containing H₂O₂ and activated carbon (AC)-supported iron oxychloride (FeOCl) nanoparticles to remove airborne dichloroethane (DCE). The operating conditions of the wet scrubber were optimized, and the mechanism was explored. The results showed that the adsorption of dissolved DCE onto AC promoted its transfer from air to water, while the accumulation of DCE on AC facilitated its oxidation by •OH generated on FeOCl catalyst. The wet scrubber performed well at pH 3 and low H₂O₂ concentrations. By pulsed or continuous dosing H₂O₂, the cooperative adsorption-catalytic oxidation allowed long-term DCE removal from air. Benefiting from satisfactory cost-effectiveness, avoidance of toxic byproduct formation, and less corrosion and catalyst poisoning, wet scrubbers coupled with cooperative adsorption and heterogeneous advanced oxidation processes could have broad application potentials in VOC control.

Elucidating the role of confinement and shielding effect over zeolite enveloped Ru catalysts for propane low temperature degradation

Volatile organic compounds (VOCs) are the main precursor for ozone formation and hazardous to human health. Light alkane as one of the typical VOCs is difficult to degrade to CO₂ and H₂O by catalytic degradation method due to its strong C-H bond. Herein, a series of ultrafine Ru nanoclusters (<0.95 nm) enveloped in silicalite-1 (S-1) zeolite catalysts were designed and prepared by a simple one-pot method and applied for catalytic degradation of propane. The results demonstrate that the enveloped Ru₁@S-1 catalyst has excellent propane degradation performance. Its T₉₅ is as low as 294 °C with moisture, and the turnover frequency (TOF) value is up to 5.07 × 10^-3 s^-1, evidently higher than that of the comparison supported catalyst (Ru₁/S-1). Importantly, Ru₁@S-1 exhibits superior thermal stability, water resistance and recyclability, which should be attributed to the confinement and shielding effect of the S-1 shell. The in-situ DRIFTS result reveals that the propane degradation over Ru₁@S-1 follows the Mars-van-Krevelen (MvK) mechanism, where the hydroxy from the framework of zeolite can provide the active oxygen species. Our work provides a new candidate and guideline for an efficient and stable catalyst for the low-temperature degradation of the light alkane VOCs.

Recent Advances of Chlorinated Volatile Organic Compounds' Oxidation Catalyzed by Multiple Catalysts: Reasonable Adjustment of Acidity and Redox Properties

The severe hazard of chlorinated volatile organic compounds (CVOCs) to human health and the natural environment makes their abatement technology a key topic of global environmental research. Due to the existence of Cl, the byproducts of CVOCs in the catalytic combustion process are complex and toxic, and the possible generation of dioxin becomes a potential risk to the environment. Well-qualified CVOC catalysts should process favorable low-temperature catalytic oxidation ability, excellent selectivity, and good resistance to poisoning, which are governed by the reasonable adjustment of acidity and redox properties. This review overviews the application of different types of multicomponent catalysts, that is, supported noble metal catalysts, transition metal oxide/zeolite catalysts, composite transition metal oxide catalysts, and acid-modified catalysts, for CVOC degradation from the perspective of balance between acidity and redox properties. This review also highlights the synergistic degradation of CVOCs and NO_x from the perspective of acidity and redox properties. We expect this work to inspire and guide researchers from both the academic and industrial communities and help pave the way for breakthroughs in fundamental research and industrial applications in this field.

Lotus-like Ni@NiO nanoparticles embedded porous carbon derived from MOF-74/cellulose nanocrystal hybrids as solid phase microextraction coating for ultrasensitive determination of chlorobenzenes from water

Lotus-like Ni@NiO embedded porous carbons (Ni@NiO/PCs) were fabricated by pyrolysis of MOF-74/cellulose nanocrystal hybrids, and used as a solid phase microextraction (SPME) coating for ultrasensitive determination of chlorobenzenes (CBs) from water combined with gas chromatography-mass spectrometry. Owing to its abundant chemical groups, high porosity, and excellent thermal stability, the as-prepared Ni@NiO/PCs presented superior extraction performance compared to commercial SPME coatings. Notably, Ni@NiO/PCs derived from MOF-74/CNC hybrids presented higher extraction efficiencies towards CBs than that derived from pristine CNC and MOF-74 due to the formation of micro/mesopores and more abundant oxygen-containing groups. Under the optimum extraction conditions, the proposed analytical method presented wide linearity range (0.5-1500 ng L^-1), ultra-low detection of limit (0.005-0.049 ng L^-1), and excellent precision with relative standard deviations of 4.7-9.2% for a single fiber and 8.8-10.9% for 5 fibers, and long lifetime (≥160 times). The proposed analytical method was finally applied for determination of CBs from real water samples, and the recoveries were in the range of 93.2-116.8% towards eight CBs. This study delivered a novel and efficient sorbent as SPME coating to extraction and determination of CBs from water.

Carbon Dot-Decorated Graphite Carbon Nitride Composites for Enhanced Solid-Phase Microextraction of Chlorobenzenes from Water

In this work, carbon dot-decorated graphite carbon nitride composites (CDs/g-C₃N₄) were synthesized and innovatively used as a SPME coating for the sensitive determination of chlorobenzenes (CBs) from water samples, coupled with gas chromatography-mass spectrometry. The CDs/g-C₃N₄ coating presented superior extraction performance in comparison to pristine g-C₃N₄, owing to the enhancement of active groups by CDs. The extraction capacities of as-prepared SPME coatings are higher than those of commercial coatings due to the functions of nitrogen-containing and oxygen-containing group binding, π-π stacking, and hydrophobic interactions. Under optimized conditions, the proposed method exhibits a wide linearity range (0.25-2500 ng L^-1), extremely low detection of limits (0.002-0.086 ng L^-1), and excellent precision, with relative standard deviations of 5.3-9.7% for a single fiber and 7.5-12.6% for five fibers. Finally, the proposed method was successfully applied for the analysis of CBs from real river water samples, with spiked recoveries ranging from 73.4 to 109.1%. This study developed a novel and efficient SPME coating material for extracting organic pollutants from environmental samples.

Recycling electroplating sludge as a monolithic catalyst for effective catalytic purification of volatile organic compounds

Electroplating sludge had a high content of heavy metals and usually lacked high-value-added utilization. In this work, Cu-containing sludge was used to synthesize a spinel catalyst, which was applied in catalytic oxidization of toluene. As a result, the sludge-derived spinel removed 50% of toluene (1000 ppm, 9600 h^-1) at 280 °C. In comparison, a reagent-synthesized spinel with a similar component removed 50% of pollutant at 294 °C. The sludge-derived spinel also showed a stable performance for over 50 h at 370 °C. Even when the initial concentration was increased to 5000 ppm, or the gas hourly space velocity was increased to 40,000 h^-1, the temperature for 50% removal was only increased to 303 °C. According to characterizations, surface oxygens of the sludge-derived spinel were more active than those in the reagent-synthesized one. Besides, the former had more active surface oxygens (207.9 μmol/g) than the latter (183.1 μmol/g). Furthermore, the sludge-derived spinel was coated on a monolithic honeycomb, which were also effective in catalytic oxidization of toluene. The main results of this work were in favor of high-value-added utilization of hazardous solid waste and promoting its real industry application.

Utilization of NaP zeolite synthesized with different silicon species and NaAlO2 from coal fly ash for the adsorption of Rhodamine B

NaP zeolite was successfully synthesized by using various commercial silicon sources and NaAlO₂ extracted from coal fly ash as raw materials. Multiple characterization methods were employed to investigate the effect of silicon sources on NaP zeolite. Adsorption performance and mechanism of NaP zeolite for Rhodamine B were surveyed. The product synthesized by fumed SiO₂ at n(Na₂O)/n(SiO₂) = 0.70 presented single spherical morphology with the average grain size of 3.22 µm. The shearing of NaOH resulted in the formation of silicates with different polymerization degrees and silicates occurring in the forms of monomeric, dimeric, trimeric, long-chain, and cyclic oligomers, initiating an improvement in pore structure and morphology. The introduction of dynamic crystallization mode (with the rotating speed of 150 r/min) not only reduced grain size (from 3.22 µm to 1.78 µm) but also shortened crystallization time (from 12 h to 10 h) of NaP-fumed SiO₂. NaP zeolite had excellent adsorption performance for Rhodamine B with the removal rate of 98.26%. Adsorption behavior fitted well with pseudo-second-order kinetics and Langmuir isotherm adsorption equations. Adsorption process was endothermic and feasible. NaP zeolite had good regeneration and alkali resistance capacities. Adsorption manners mainly contained pore filling, electrostatic attraction, and hydrogen bonding, focused on physisorption.

Nitrogen-doped porous biochar derived from marine algae for efficient solid-phase microextraction of chlorobenzenes from aqueous solution

Nitrogen-doped porous biochar (NPB) with a large specific surface area, wide pore size distribution, graphitized structure, nitrogen doping, and hydrophobicity was fabricated by high-temperature modification of algal biochar with potassium carbonate. This NPB was then uniformly coated on stainless steel wire as a novel solid-phase microextraction (SPME) fiber. The extraction efficiency of NPB-coated fiber for seven chlorobenzenes (CBs) was excellent; it was 1.0-112.2 times higher than that of commercial SPME fibers. A trace determination method was developed for seven CBs in water with the optimized extraction conditions by NPB-coated fiber and gas chromatography-electron capture detector, which showed wide linear ranges (1-1000 ng L^-1), low detection limits (0.007-0.079 ng L^-1), great repeatability (2.5-6.5% for intra-day, and 3.1-6.8% for inter-day), and excellent reproducibility (3.5-6.3%, n = 5). The practicality of the developed method was evaluated using real water samples and showed great recoveries (89.55-105.19%). This study showed that low-cost biomass wastes could be converted to advanced biochar materials by a facile method, and displayed excellent performance in SPME applications.