Prepared self-growing supported nickel catalyst by recovering Ni (Ⅱ) from metal wastewater using geopolymer microspheres

Synthesis of BiOX-Red Mud/Granulated Blast Furnace Slag Geopolymer Microspheres for Photocatalytic Degradation of Formaldehyde

Release of formaldehyde gas indoors is a serious threat to human health. The traditional adsorption method is not stable enough for formaldehyde removal. Photocatalytic degradation of formaldehyde is effective and rapid, but photocatalysts are generally expensive and not easy to recycle. In this paper, geopolymer microspheres were applied as matrix materials for photocatalysts loading to degrade formaldehyde. Geopolymer microspheres were prepared from red mud and granulated blast furnace slag as raw materials by alkali activation. When the red mud doping was 50%, the concentration of NaOH solution was 6 mol/L, and the additive amount was 30 mL, the prepared geopolymer microspheres possessed good morphological characteristics and a large specific surface area of 38.80 m2/g. With the loading of BiOX (X = Cl, Br, I) photocatalysts on the surface of geopolymer microspheres, 85.71% of formaldehyde gas were adsorbed within 60 min. The formaldehyde degradation rate of the geopolymer microspheres loaded with BiOI reached 87.46% within 180 min, which was 23.07% higher than that of the microspheres loaded with BiOBr, and 50.50% higher than that of the microspheres loaded with BiOCl. While ensuring the efficient degradation of formaldehyde, the BiOX (X = Cl, Br, I)-loaded geopolymer microspheres are easy to recycle and can save space. This work not only promotes the resource utilization of red mud and granulated blast furnace slag, but also provides a new idea on the formation of catalysts in the process of photocatalytic degradation of formaldehyde.

Application of CO2-loaded geopolymer in Zn removal from water: A multi-win strategy for coal fly ash disposal, CO2 emission reduction, and heavy metal-contaminated water treatment

Coal fly ash accumulation, global warming, and heavy metal-contaminated water environments are three primary environmental concerns. Porous geopolymers are economical porous adsorbents that can be produced using coal fly ash as a raw material and employed for heavy metal removal from water. However, residual alkalis on the geopolymer can lead to extreme increases in pH and cause environmental stresses, which limits the large-scale production and application of geopolymers in industries and environments. A green approach to alleviating the high basicity of geopolymers through CO2 exposure is proposed, with CO2 adsorption experiments as well as Zn removal batch and column experiments conducted to evaluate the practicality of the synergistic strategy. CO2 adsorption experiments show the CO2 capture capacity of fresh geopolymer (F@PG) is 0.80 mmol g-1, greater than that of the conventionally washed geopolymer (W@PG, 0.26 mmol g-1), with the pH of the geopolymer decreasing after both washing and CO2 exposure. Batch experiments suggest neither washing nor CO2 exposure cause a significant change in the Zn adsorption capacity of the geopolymer; column experiments show the CO2-exposed geopolymer (C@PG) has a pH < 9.5 and a satisfactory Zn removal performance similar to W@PG, but F@PG with a pH ∼12 results in a conversion of Zn to anionic forms and a decrease in Zn removal efficiency. These results indicate CO2 exposure is a practical method to decrease the pH of geopolymers for applications related to heavy metal-contaminated water treatment and provide a large-scale industrial option for coal fly ash consumption and CO2 emission reduction.

In-situ conversion of geopolymer into novel floral magnetic sodalite microspheres for efficient removal of Cd(II) from water

In the present work, a novel, floral-like, magnetic sodalite microsphere (SODM) was synthesized in situ by using fly ash (FA) and metakaolin (MK) as raw materials and was used to remove Cd(II) from water. Its magnetism can solve the problems of adsorbent recovery and possible secondary pollution. During the static adsorption, SODM shows a maximum adsorption capacity of 245.17 mg/g. The adsorption of Cd(II) on the SODM surface is spontaneous, exothermic, and physicochemical adsorption, which was evaluated by thermodynamics, kinetics, and isotherm studies. During dynamic adsorption, SODM shows a maximum adsorption capacity of 342.74 mg/g in the simulated solution prepared by the deionized water, compared to 215.88 mg/g in the simulated solution prepared using Xiangsi Lake water from Guangxi Minzu University. At 0.5 g SODM dosage in the dynamic adsorption, the adsorption capacity could rise to 632.81 mg/g. These results demonstrated the excellent Cd (II) adsorption performance of the SODM. The adsorption of cadmium on the SODM surface includes the synergistic effects of electrostatic attraction, ion exchange, and surface coordination reaction. Besides, the SODM shows good regeneration performance in both the deionized water and Xiangsi Lake water. The present study explores SODM as an adsorbent for the Cd (II) removal from wastewater and unbolts the industrial applicability of the SODM in the field of wastewater purification.

A novel aminated lignin/geopolymer supported with Fe nanoparticles for removing Cr(VI) and naphthalene: Intermediates promoting the reduction of Cr(VI)

A novel, inexpensive and eco-friendly aminated lignin/geopolymer supported with Fe nanoparticles (Fe@N-L-GM) composite was successfully synthesized using kaolin and lignin as the major precursors. The prepared Fe@N-L-GM had larger specific surface area, rich oxygen-containing and nitrogen-containing functional groups, greater electron transfer ability and interconnective porous structure. The Fe@N-L-GM could be employed as the adsorbent of Cr(VI) and the activator of potassium peroxymonosulfate (PMS) for treatment of Cr(VI) and naphthalene (NAP) in wastewater. The adsorption and degradation results indicated that the maximum adsorption capacity of Cr(VI) could reach 65.83 mg g^-1, whereas the maximum NAP degradation efficiency could reach 97.81 %. The adsorbed Cr(VI) was mostly converted to the low toxic Cr(III) through the reduction of electron donors such as Fe(II), amino and hydroxyl groups. The quenching experiment results confirmed that ·OH might be the crucial ROSs in mediating NAP degradation. In the simultaneous removal experiment of Cr(VI) and NAP, the Cr(VI) removal rate was significantly improved in the presence of NAP, while phenol as the degradation intermediate of NAP might be the main substance for promoting the reduction of Cr(VI). This work provided the theoretical foundation and a new type of material for the simultaneous removal of heavy metal and persistent organic pollutants (POPs).

Elaboration of geopolymer package derived from uncalcined phosphate sludge and its solidification performance on nuclear grade resins loaded with 134Cs

Nuclear-grade Spent Organic Resin (SOR) contains high concentrations of radioactive nuclides and metal contaminants, while phosphate sludge contains high amount of fine clayey particles and CO₃^2-, both posing a major threat to the biosphere. In this study, a novel geopolymer package (GP) was proposed to directly solidify SOR loaded with ¹³⁴Cs by incorporating uncalcined phosphate sludge (UPS) as feedstocks, activated by NaOH/KOH. The results showed that alkali-mixed reagents-activated GP is more advantageous in terms of chemical stability and mechanical properties than NaOH-activated GP, recording compressive strength values greater than the waste acceptance criteria and OPC. The 28-day compressive strength of solidified packages can exceed 31 MPa at the highest amount of 42 wt% UPS. The addition of NaF powder into the solidified packages generates more hybrid type gels, which are more conducive to partial dissolution and bonding UPS particles, thereby producing stable and stronger GP. Leaching results of solidified GP in presence of up to 13 wt% SORs showed that only 0.15 % of total ¹³⁴Cs was leached, even under aggressive solutions. Solidification mechanism revealed that activation of UPS-MK blend forms N,K-A-S-H, (N,K,C)-A-S-H/C-S-H gels coexisting with unreacted particles, thereby solidify/stabilize metal contaminants and Cs⁺ by a synergetic immobilization action of hydration products via substitution and encapsulation. This study provides a promising paradigm for effective solidification of nuclear-grade resins and synergetic harmless treatment of industrial/phosphate mine solid wastes.

Synchronous catalytic depolymerization of alkaline lignin to monophenols with in situ-converted hierarchical zeolite for bio-polyurethane production

Catalytic depolymerization of lignin to high-value chemicals is crucial to the comprehensive achievement of sustainable and economic concerns. Herein, we propose a green, practical, and economic strategy for the synchronous catalytic depolymerization of lignin based on in situ conversion of geopolymer precursor to hierarchical zeolite, using water as a mild solvent and without external H₂, additives, co-catalysts or co-solvents. The in situ-converted hierarchical analcime (ANA) zeolite outperformed previously reported representative catalysts, such as PTA/MCM-41 and CuAlMgO_x in lignin depolymerization with a high monophenol yield (95.61 ± 7.89 mg/g). The synergetic effect of the micro-mesoporous structure and enhanced acidic sites of the ANA played a vital role in regulating the monomer composition and the yield of monophenols. The obtained monophenols are rich in -OH groups and can be utilized as a substitute for petroleum resources, such as ethylene glycol or glycerin for the synthesis of bio-polyurethane foams (bio-PUFs). This work expands the scope of using biomass in a sustainable manner to make high-value chemicals and biomaterials.

Review on the Use of Heavy Metal Deposits from Water Treatment Waste towards Catalytic Chemical Syntheses

The toxicity and persistence of heavy metals has become a serious problem for humans. These heavy metals accumulate mainly in wastewater from various industries' discharged effluents. The recent trends in research are now focused not only on the removal efficiency of toxic metal particles, but also on their effective reuse as catalysts. This review discusses the types of heavy metals obtained from wastewater and their recovery through commonly practiced physico-chemical pathways. In addition, it covers the advantages of the new system for capturing heavy metals from wastewater, as compared to older conventional technologies. The discussion also includes the various structural aspects of trapping systems and their hypothesized mechanistic approaches to immobilization and further rejuvenation of catalysts. Finally, it concludes with the challenges and future prospects of this research to help protect the ecosystem.

Taguchi optimization design of diameter-controlled synthesis of multi walled carbon nanotubes for the adsorption of Pb(II) and Ni(II) from chemical industry wastewater

Herein, Taguchi L₉ orthogonal array was used for the first time to optimize synthesis of diameter-controlled multi walled carbon nanotubes (MWCNTs). The nanoadsorbents, MWCNTs_5-15 nm and MWCNTs_16-25 nm were applied for Pb(II) and Ni(II) ion removal from paint, battery and electroplating wastewater. The results indicated successful synthesis of MWCNTs with diameter distribution ranges of 5-15 nm and 16-25 nm. The synthetized smaller diameter MWCNTs_5-15 nm revealed higher Brunauer-Emett-Teller (BET) surface area of 1306 ± 5 m²/g compared to larger diameter MWCNTs_16-25 nmwith the surface area of 1245 ± 4 m²/g. They demonstrated excellent adsorption of Pb(II) and Ni(II) ions within the permissible concentration proposed by WHO at pH, contact time, adsorbent dosage and temperature of 5, 60 min, 30 mg/L and 50 °C, respectively. Particularly, MWCNTs_5-15 nm possessed high adsorption capacity of 215.38 ± 0.03 mg/g for Pb(II) and 230.78 ± 0.01 mg/g for Ni(II). Again, the maximum adsorption capacity of 201.35 ± 0.02 and 206.40 ± 0.02 mg/g was achieved for Pb(II) and Ni(II) using MWCNTs_16-25 nm. All in all, the adsorption capacity of the nanoadsorbents at the investigated diameter range showed higher efficiency compared to other materials for heavy metals elimination from chemical industrial wastewater.

KOH-Activated Geopolymer Microspheres Recycle Co(II) with Higher Adsorption Capacity than NaOH-Activated Ones

A new type of absorbent with high efficiency was synthesized by KOH-activated slag-based geopolymer microspheres (K-SGM), which exhibited higher adsorption capacities for recycling Co(II) (Q _e,K-SGM = 192.31 mg/g, Q _e,Na-SGM = 91.21 mg/g) than NaOH-activated ones (Na-SGM). During the Co(II) adsorption process, these two kinds of geopolymeric adsorbents could be combined with heavy metal ions to optimize each other and form heavy metal-grown aid adsorbents. The morphology of Na-SGM and K-SGM was different which varied from coarse pores to nanonetwork or nanosheets after Co(II) adsorption, and the Brunauer-Emmett-Teller (BET) surface areas of Na-SGM (10.46 m²/g) and K-SGM (22.96 m²/g) increased to 117.38 and 228.73 m²/g after Co(II) adsorption, respectively. The BET surface area of K-SGM is twice that of Na-SGM whether before or after Co(II) ion adsorption. The hydrated ionic radius of K and Na, the alkalinity degree of K⁺ and Na⁺, the electronegativity of Na-SGM and K-SGM surface, the BET surface area and Fourier transform infrared changes of CO₃ ^2- and OH before and after Co(II) adsorption, and X-ray photoelectron spectroscopy analysis like the relative content of geopolymer gel and bridging oxygen bonds in the Na-SGM and K-SGM are the fundamental reasons for the obvious differences in Co(II) adsorption between Na-SGM and K-SGM.