Efficient degradation of indole by microbial fuel cell based Fe2O3-polyaniline-dopamine hybrid composite modified carbon felt anode

Revealed mechanism of 3D-open-microarray boosting exoelectrogens Geobacter enrichment and extracellular electron transfer for high power generation in microbial fuel cells

Theanode enables raised microbial fuel cells (MFCs) performance via in-situ growth electroactive material. However, the role of fabricated microstructures in electroactive bacteria loading and extracellular electron transfer (EET) has been paid less attention. Here, MoS2 nanosheets are custom grown on carbon cloth to construct anode models with diverse surface microstructures. Surprisingly, the 3D-MoS2/NS-CC anode only 0.85 d enables the MFC to be started and achieves a maximum power density of 3.85 W/m2, which is significantly faster and higher than that of 2D-MoS2/NS-CC (3.6 d, 2.75 W/m2) and CC (4.46 d, 1.98 W/m2). As for the mechanism of 3D-MoS2/NSCCboosting MFC performance, this is attributed to the 3D-open-microarray preventing electroactive bacteria from shedding and facilitating to the establishment of excellent EET channels through the formed hybrid cell-electrode systems and Geobacter enrichment of up to 86.1 %. This research provides promising guidance for integrating nanomaterials and architecture to construct high-performance anodes in MFCs.

CeO2@Co3O4-decorated carbon felt anode with mesoporous nanoparticles for enhanced POM wastewater treatment and electricity generation in microbial fuel cells

Microbial fuel cells (MFCs) have been widely used in the treatment of organic wastewater because of its advantages of high efficiency, environmental friendliness, and no secondary pollution. In this study, we developed a composite anode, CeO2@Co3O4-PEDOT/CF (PEDOT: poly(3,4-ethylenedioxythiophene), CF: carbon felt), by incorporating bimesoporous CeO2@Co3O4 nanoparticles and PEDOT layer. The MFCs equipped with this novel anode had demonstrated exceptional catalytic performance in the treatment of Polyoxymethylene (POM) wastewater. Specifically, it achieved a 74.9 % increase in output voltage (586 ± 23 mV), a 2.5-fold increase in power density (3564 ± 27 mW/m2), and enhancements of 41.8 %, 40.1 %, and 47.0 % in the degradation rates of formaldehyde (HCHO, 97.2 %), 1,3,5-trioxane (TOX, 93.6 %), and chemical oxygen demand (COD) removal efficiency (84.4 %), respectively, when compared to a bare CF anode. Furthermore, the MFC with the composite anode demonstrated high degradation efficiency and COD removal efficiency across various industrial water environments. Additionally, the wheat seed germination experiments indicated a significant reduction in the toxicity of the degraded solution. This enhanced performance could be attributed to the synergistic effects of the bimesoporous CeO2@Co3O4 nanoparticles and the PEDOT layer. This study presents a promising strategy for the degradation of organic pollutants and the generation of bioelectricity in practical applications.

Enhanced electroactive bacteria enrichment and facilitated extracellular electron transfer in microbial fuel cells via polydopamine coated graphene aerogel anode

The structure and surface physicochemical properties of anode play a crucial role in microbial fuel cells (MFCs). To enhance the enrichment of exoelectrogen and facilitate extracellular electron transfer (EET), a three-dimensional macroporous graphene aerogel with polydopamine coating was successfully introduced to modify carbon brush (PGA/CB). The three-dimensional graphene aerogel (GA) with micrometer pores improved the space utilization efficiency of microorganisms. Polydopamine (PDA) coating enhanced the physicochemical properties of the electrode surface by introducing abundant functional groups and nitrogen-containing active sites. MFCs equipped with PGA/CB anodes (PGA/CB-MFCs) demonstrated superior power generation compared to GA/CB-MFCs and CB-MFCs (MFCs with GA/CB and CB anodes respectively), including a 23.0 % and 30.1 % reduction in start-up time, and an increase in maximum power density by 2.43 and 1.24 times respectively. The higher bioelectrochemical activity exhibited by the biofilm of PGA/CB anode and the promoted riboflavin secretion by PGA modification imply the enhanced EET efficiency. 16S rRNA high-throughput sequence analysis of the biofilms revealed successful enrichment of Geobacter on PGA/CB anodes. These findings not only validate the positive impact of the synergistic effects between GA and PDA in promoting EET and improving MFC performance but also provide valuable insights for electrode design in other bioelectrochemical systems.

Exploring the promoting behavior of weak electric mediation on indole and pyridine biodegradation under anaerobic condition

Indole and pyridine, which are highly produced refractory compounds in the industrial wastewater, exhibit poor degradation capabilities in natural environments. In this study, we developed an anaerobic digestion system coupled with weak electric mediation (ED), and investigated the promoting effect of weak electricity on indole and pyridine biodegradation. The degradation characteristics were systematically explored, and the results showed that the degradation rate and mineralization of indole and pyridine were significantly enhanced, the production of CH4 was increased 1.4-fold, and the optimal voltages were 1.0 V and 0.8 V in the ED, respectively. Moreover, simultaneous removal of carbon and nitrogen was achieved. Gas chromatography-mass spectrometry analysis verified the transformation products, and possible pathways were proposed. Several byproducts of indole and pyridine were identified, with oxindole and glutaric dialdehyde being the main metabolites, respectively. Additionally, density functional theory (DFT) analysis was performed to investigated the radical indices and stabilities of the molecules to further confirm the degradation pathway. Microbial structure analysis demonstrated that the electrically mediated enhanced metabolism and activity of functional microbes, led to the promotion of indole and pyridine mineralization. Moreover, such species as degrading bacteria (Alicycliphilus, Shinella) and electroactive bacteria (Achromobacter), anaerobic ammonia-oxidizing bacteria (SM1A02), and denitrifying bacteria (Thiobacillus) coexisted. This study demonstrates that weak electric mediation is a promising methodology for enhancing the removal of indole and pyridine from wastewater under anaerobic conditions.

Bibliometric analysis and systematic review of electrochemical methods for environmental remediation

Electrochemical methods are increasingly favored for remediating polluted environments due to their environmental compatibility and reagent-saving features. However, a comprehensive understanding of recent progress, mechanisms, and trends in these methods is currently lacking. Web of Science (WoS) databases were utilized for searching the primary data to understand the knowledge structure and research trends of publications on electrochemical methods and to unveil certain hotspots and future trends of electrochemical methods research. The original data were sampled from 9080 publications in those databases with the search deadline of June 1st, 2022. CiteSpace and VOSviewer software facilitated data visualization and analysis of document quantities, source journals, institutions, authors, and keywords. We discussed principles, influencing factors, and progress related to seven major electrochemical methods. Notably, publications on this subject have experienced significant growth since 2007. The most frequently-investigated areas in electrochemical methods included novel materials development, heavy metal remediation, organic pollutant degradation, and removal mechanism identification. "Advanced oxidation process" and "Nanocomposite" are currently trending topics. The major remediation mechanisms are adsorption, oxidation, and reduction. The efficiency of electrochemical systems is influenced by material properties, system configuration, electron transfer efficiency, and power density. Electro-Fenton exhibits significant advantages in achieving synergistic effects of anodic oxidation and electro-adsorption among the seven techniques. Future research should prioritize the improvement of electron transfer efficiency, the optimization of electrode materials, the exploration of emerging technology coupling, and the reduction in system operation and maintenance costs.

Energy generation from bioelectrochemical techniques: Concepts, reactor configurations and modeling approaches

The process industries play a significant role in boosting the economy of any nation. However, poor management in several industries has been posing worrisome threats to an environment that was previously immaculate. As a result, the untreated waste and wastewater discarded by many industries contain abundant organic matter and other toxic chemicals. It is more likely that they disrupt the proper functioning of the water bodies by perturbing the sustenance of many species of flora and fauna occupying the different trophic levels. The simultaneous threats to human health and the environment, as well as the global energy problem, have encouraged a number of nations to work on the development of renewable energy sources. Hence, bioelectrochemical systems (BESs) have attracted the attention of several stakeholders throughout the world on many counts. The bioelectricity generated from BESs has been recognized as a clean fuel. Besides, this technology has advantages such as the direct conversion of substrate to electricity, and efficient operation at ambient and even low temperatures. An overview of the BESs, its important operating parameters, bioremediation of industrial waste and wastewaters, biodegradation kinetics, and artificial neural network (ANN) modeling to describe substrate removal/elimination and energy production of the BESs are discussed. When considering the potential for use in the industrial sector, certain technical issues of BES design and the principal microorganisms/biocatalysts involved in the degradation of waste are also highlighted in this review.

Efficient biodechlorination at the Fe3O4-based silicone powder modified chlorobenzene-affinity anode

The treatment of chlorinated volatile organic compounds faces challenges of secondary pollution and less-efficiency due to the substitution of chlorine. Microbial fuel cells (MFCs) provide a promising opportunity for its abatement. In this study, a novel Fe3O4 nanoparticles and silicone-based powder (SP) were integrated and immobilized on carbon felt (CF+Fe3O4@SP), which was further used as anode in the chlorobenzene (CB) powered MFC. Owing to the cooperation between SP and Fe3O4, the anode exhibited excellent performance for both biodechlorination and power generation. The results indicated that the CF+Fe3O4@SP anode loaded MFC achieved 98.5% removal of 200 mg/L CB within 28 h, and the maximum power density was 675.9 mW/m3, which was a 45.6% increase compared to that of the bare CF anode. Microbial community analysis indicated that the genera Comamonadaceae, Pandoraea, Obscuribacteraceae, and Truepera were dominated, especially, the Comamonadaceae and Obscuribacteraceae showed outstanding affinity for Fe3O4 and SP, respectively. Moreover, the proportion of live bacteria, secretion of extracellular polymer substances, and protein content in the extracellular polymer substances were significantly increased by modifying Fe3O4@SP onto the carbon-based anode. Thus, this study provides new insights into the development of MFCs for refractory and hydrophobic volatile organic compounds removal.

Long-term operation of cathode-enhanced ecological floating bed coupled with microbial electrochemical system for urban surface water remediation: From lab-scale research to engineering application

Ecological floating bed coupled with microbial electrochemical system (ECOFB-MES) has great application potential in micro-polluted water remediation yet limited by low electron transfer efficiency on the microbial/electrode interface. Here, an innovative cathode-enhanced EOCFB-MES was constructed with nano-Fe₃O₄ modification and applied for in-situ remediation both at lab scale (6 L, 62-day operation) and demonstration scale (2300 m², 1-year operation). The cathode-enhanced ECOFB-MES exhibited superior removal in TOC (81.43 ± 2.05%), TN (85.12% ± 1.46%) and TP (59.80 ± 2.27%), much better than those of original ECOFB-MES and anode-enhanced ECOFB-MES in the laboratory test. Meanwhile, cathode-enhanced ECOFB-MES boosted current output by 33% than that of original ECOFB-MES, which made a great contribution to the improvement of ectopic electronic compensation for pollutant decontamination. Notably, cathode-enhanced ECOFB-MES presented high efficiency, stability and durability in the demonstration test, and fulfilled the average concentration of COD (9.5 ± 2.81 mg/L), TN (1.00 ± 0.21 mg/L) and TP (0.10 ± 0.04 mg/L) of effluent water to meet the Grade III (GB 3838-2002) with stable operation stage. Based on the KOSIM calculation, the removal loads of cathode-enhanced ECOFB-MES in carbon, nitrogen and phosphorus could reach 37.14 g COD/(d·m²), 2.62 g TN/(d·m²) and 0.55 g TP/(d·m²), respectively. According to the analysis of microbial communities and functional genes, the cathode modified by Fe₃O₄ made a sensible enrichment in electroactive bacteria (EAB) and nitrogen-converting bacteria (NCB) as well as facilitated the functional genes expression in electron transfer and nitrogen metabolism, resulting in the synergistic removal of carbon in sediment and nitrite in water. This study provided a brandnew technique reference for in-situ remediation of surface water in practical application.

Zirconium ferrite incorporated zeolitic imidazolate framework-8: a suitable photocatalyst for degradation of dopamine and sulfamethoxazole in aqueous solution

The complete removal of pharmaceutical wastes from polluted water systems is a global challenge. Therefore, this study incorporates zirconium ferrite (ZrFe2O4) into zeolitic imidazolate framework-8 (ZIF-8) to form ZrFe2O4@ZIF-8. The ZrFe2O4@ZIF-8 is a photocatalyst for removing dopamine (DOP) and sulfamethoxazole (SMX) from an aqueous solution. The scanning electron micrograph revealed the surfaces of ZrFe2O4 and ZrFe2O4@ZIF-8 to be heterogeneous with irregularly shaped and sized particles. The transmission electron micrograph (TEM) images of ZrFe2O4 and ZrFe2O4@ZIF-8 showed an average particle size of 24.32 nm and 32.41 nm, respectively, with a bandgap of 2.10 eV (ZrFe2O4@ZIF-8) and 2.05 eV (ZrFe2O4). ZrFe2O4@ZIF-8 exhibited a better degradation capacity towards DOP and SMX than ZrFe2O4. ZrFe2O4@ZIF-8 expressed a complete (100%) degradation of DOP and SMX during the photodegradation process. Interestingly, the process involved both adsorption and photocatalytic degradation simultaneously. ZrFe2O4@ZIF-8 demonstrated high stability with a consistent regeneration capacity of 98.40% for DOP and 94.00% for SMX at the 10th cycle of treatment in a process described by pseudo-first-order kinetics. The study revealed ZrFe2O4@ZIF-8 as a promising photocatalyst for the purification of DOP and SMX-contaminated water systems.

Advanced bioelectrochemical system for nitrogen removal in wastewater

Nitrogen (N) pollution in water has become a serious issue that cannot be ignored due to the harm posed by excessive nitrogen to environmental safety and human health; as such, N concentrations in water are strictly limited. The bioelectrochemical system (BES) is a new method to remove excessive N from water, and has attracted considerable attention. Compared with other methods, it is highly efficient and has low energy consumption. However, the BES has not been applied for N removal in practice due to lack of in-depth research on the mechanism and construction of high-performance electrodes, separators, and reactor configurations; this highlights a need to review and examine the efforts in this field. This paper provides a comprehensive review on the current BES research for N removal focusing on the reaction principles, reactor configurations, electrodes and separators, and treatment of actual wastewater; the corresponding performances in these realms are also discussed. Finally, the prospects for N removal in water using the BES are presented.

Advances in the development of electrode materials for improving the reactor kinetics in microbial fuel cells

Microbial fuel cells (MFCs) are an emerging technology for converting organic waste into electricity, thus providing potential solution to energy crises along with eco-friendly wastewater treatment. The electrode properties and biocatalysts are the major factors affecting electricity production in MFC. The electrons generated during microbial metabolism are captured by the anode and transferred towards the cathode via an external circuit, causing the flow of electricity. This flow of electrons is greatly influenced by the electrode properties and thus, much effort has been made towards electrode modification to improve the MFC performance. Different semiconductors, nanostructured metal oxides and their composite materials have been used to modify the anode as they possess high specific surface area, good biocompatibility, chemical stability and conductive properties. The cathode materials have also been modified using metals like platinum and nano-composites for increasing the redox potential, electrical conductivity and surface area. Therefore, this paper reviews the recent developments in the modification of electrodes towards improving the power generation capacity of MFCs.

Advances in interfacial engineering for enhanced microbial extracellular electron transfer

The extracellular electron transfer (EET) efficiency between electroactive microbes (EAMs) and electrode is a key factor determining the development of microbial electrochemical technology (MET). Currently, the low EET efficiency of EAMs limits the application of MET in the fields of organic matter degradation, electric energy production, seawater desalination, bioremediation and biosensing. Enhancement of the interaction between EAMs and electrode by interfacial engineering methods brings bright prospects for the improvement of the EET efficiency of EAMs. In view of the research in recent years, this mini-review systematically summarizes various interfacial engineering strategies ranging from electrode surface modification to hybrid biofilm formation, then to single cell interfacial engineering and intracellular reformation for promoting the electron transfer between EAMs and electrode, focusing on the applicability and limitations of these methodologies. Finally, the possible key directions, challenges and opportunities for future interfacial engineering to strengthen the microbial EET are proposed in this mini-review.

Modified cobalt-manganese oxide-coated carbon felt anodes: an available method to improve the performance of microbial fuel cells

The novel MnCo₂O₄ (MCO/CF), CNTs-MnCo₂O₄ (CNTs-MCO/CF) and MnFe₂O₄-MnCo₂O₄ (MFO-MCO/CF) electrodes were prepared on carbon felt (CF) by simple hydrothermal and coating method as anodes for MFC. The modified anodes combine the electrocatalytic properties of transition metal oxides (TMOs), the high electrical conductivity of CNTs and the good biocompatibility of CF. These anodes play a synergistically role in the synthesis of structural, to realize high-efficiency electron transfer, low resistance and sufficient space for microbial colonization, while also ensuring high power density. The maximum power density of the composite electrodes CNTs-MCO/CF and MFO-MCO/CF were 4268 mW/m³ and 3660 mW/m³, respectively. The synergistic effect of multi-component effectively improves the performance of MFC. This work not only offers a good design and preparation concept for functional TMOs composite electrodes, but also provides an important guide for the fabrication of CNTs-doped MFC anodes.

Carbon-Based Composites as Anodes for Microbial Fuel Cells: Recent Advances and Challenges

Owing to the low price, chemical stability and good conductivity, carbon-based materials have been extensively applied as the anode in microbial fuel cells (MFCs). In this review, apart from the charge storage mechanism and anode requirements, the major work focuses on five categories of carbon-based anode materials (traditional carbon, porous carbon, nano-carbon, metal/carbon composite and polymer/carbon composite). The relationship is demonstrated in depth between the physicochemical properties of the anode surface/interface/bulk (porosity, surface area, hydrophilicity, partical size, charge, roughness, etc.) and the bioelectrochemical performances (electron transfer, electrolyte diffusion, capacitance, toxicity, start-up time, current, power density, voltage, etc.). An outlook for future work is also proposed.

Improving the power performance of urine-fed microbial fuel cells using PEDOT-PSS modified anodes

The need for improving the energy harvesting from Microbial Fuel Cells (MFCs) has boosted the design of new materials in order to increase the power performance of this technology and facilitate its practical application. According to this approach, in this work different poly(3,4-ethylenedioxythiophene)-polystyrenesulfonate (PEDOT-PSS) modified electrodes have been synthesised and evaluated as anodes in urine-fed MFCs. The electrochemical synthesis of PEDOT-PSS was performed by potentiostatic step experiments from aqueous solution at a fixed potential of 1.80 V (vs. a reversible hydrogen electrode) for different times: 30, 60, 120 and 240 s. Compared with other methods, this technique allowed us not only to reduce the processing time of the electrodes but also better control of the chemical composition of the deposited polymer and therefore, obtain more efficient polymer films. All modified anodes outperformed the maximum power output by MFCs working with the bare carbon veil electrode but the maximum value was observed when MFCs were working with the PEDOT-PSS based anode obtained after 30 s of electropolymerisation (535.1 µW). This value was 24.3% higher than using the bare carbon veil electrode. Moreover, the functionality of the PEDOT-PSS anodes was reported over 90 days working in continuous mode.

Study on optimization and performance of biological enhanced activated sludge process for pharmaceutical wastewater treatment

Simulated pharmaceutical wastewater was treated by moving bed biofilm reactor (MBBR) and total reflux sludge reactor process (STR) system. By cultivating specific bacterial groups, optimizing reactor process parameters, and comparatively analyzing the pollutant removal efficiency under stable operating conditions of the system, the treatment efficiency of the two systems under the combined impact load of organic pollutants on the target pollutants indole and naphthalene was studied. The optimal operation parameters of reactors: hydraulic retention time (HRT) was 8 h, aeration was 0.12 m³/h. The effect was better in 25 ± 1 °C than that in 20 ± 2 °C. During stable operation, the average removal rate of chemical oxygen demand (COD) and ammonia nitrogen (NH₄⁺-N) of the MBBR system was significantly higher than that of STR, and the two kinds of target pollutants concentration in water was lower than the detection limit. In the combined impact test of organic pollutants, the dominant bacterial group obtained by domestication had a high degradation ability, so the combined impact of indole and naphthalene had little effect on the two reactors. But in the fourth stage, the residual naphthalene concentration in the STR system effluent exceeded the target value. Therefore, the MBBR process has a stronger treatment effect on pharmaceutical wastewater than the STR system during the stable period and the impact load stage.