In situ growth of nanoflake and nanoflower-like Ni hydrated hydroxide on the surface of Ni foam as a free-standing electrode for high-performance phosphate detection

Reversible and Turn-On Fluorescence Detection of Phosphate in Aqueous Solution and Living Cell Imaging by Supramolecular Metallacycles with AIE-Active Ligands

Luminescent supramolecular metallacycles have attracted great interest as a new promising class of sensing substrates. In this work, two tetraphenylethene (TPE)-based diimidazole and dipyrazole ligands with the aggregation-induced emission (AIE) feature were designed for the construction of supramolecular tetragonal metallacycles 1-4 with two 90° mononuclear [(bpy)M]2+ or dinuclear [(bpy)2M2]4+ acceptors (bpy = 2,2'-dipyridine; M = Pd, Pt), in which the fluorescence can be quenched to an "off" state due to the ligand-to-metal charge transfer (LMCT). Metallacycle 1 was utilized as a fluorescence sensor for phosphate (PO43-) detection in aqueous solution by means of disassembly, leading to the release of the ligand. Additionally, the metallacycle can be regenerated through self-assembly via the introduction of Pd(II) acceptors. PO43- was detected using TPE-based metallacycles over a wide concentration range, with a detection limit as low as 2.1 × 10-8 M. Furthermore, sensor 1 also presented the semiquantitative visual detection ability for PO43- in the test paper mode via fluorescence changes. The aforementioned studies not only enhance the current research on fluorescent materials but also offer a strategy for the creation of stimuli-responsive supramolecular coordination complexes.

Dual-ligand two-dimensional terbium-organic frameworks nanosheets for ratiometric fluorescence detection of phosphate

Here, we reported a ratiometric fluorescence strategy for the detection of phosphate (Pi) in artificial wetland water. The strategy was based on dual-ligand two-dimensional terbium-organic frameworks nanosheets (2D Tb-NB MOFs). 2D Tb-NB MOFs were prepared through blending 5-boronoisophthalic acid (5-bop), 2-aminoterephthalic acid (NH₂-BDC) and Tb³⁺ ions at room temperature in the presence of triethylamine (TEA). The dual-ligand strategy realized dual emission originated from ligand NH₂-BDC and Tb³⁺ ions at 424 and 544 nm, respectively. Pi could compete with ligands to coordinate Tb³⁺ due to the strong binding ability between Pi and Tb³⁺, resulting in structural destruction of 2D Tb-NB MOFs, so static quenching and antenna effect between ligands and metal ions were interrupted, and emission at 424 nm was enhanced and emission at 544 nm was weakened. This novel probe had excellent linearity with Pi concentrations from 1 to 50 μmol/L; the detection limit was 0.16 μmol/L. This work revealed that mixed ligands improved sensing efficiency of MOFs by enhancing the sensitivity of the coordination between the analyte and MOFs.

Detecting phosphate using lysine-sensitized terbium coordination polymer nanoparticles as ratiometric luminescence probes

Probes for detecting phosphate ions (Pi) are required for environmental monitoring and to protect human health. Here, novel ratiometric luminescent lanthanide coordination polymer nanoparticles (CPNs) were successfully prepared and used to selectively and sensitively detect Pi. The nanoparticles were prepared from adenosine monophosphate (AMP) and Tb³⁺, and lysine (Lys) was used as a sensitizer (through the antenna effect) to switch on Tb³⁺ luminescence at 488 and 544 nm while Lys luminescence at 375 nm was quenched because of energy transfer from Lys to Tb³⁺. The complex involved is here labeled AMP-Tb/Lys. Pi destroyed the AMP-Tb/Lys CPNs and therefore decreased the AMP-Tb/Lys luminescence intensity at 544 nm and increased the luminescence intensity at 375 nm at an excitation wavelength of 290 nm, meaning ratiometric luminescence detection was possible. The ratio between the luminescence intensities at 544 and 375 nm (I₅₄₄/I₃₇₅) was strongly associated with the Pi concentration between 0.1 and 6.0 μM, and the detection limit was 0.08 μM. The dual-emission reverse-change ratio luminescence sensing method can exclude environmental effects, so the proposed assay was found to be very selective. The method was successfully used to detect Pi in real water samples, and acceptable recoveries were found, suggesting that the method could be used in practice to detect Pi in water samples.

Colorimetric assay of phosphate using a multicopper laccase-like nanozyme

A new nanozyme (Cu-NADH) is reported composed of Cu-coordinated nicotinamide adenine dinucleotide (NADH) exhibiting laccase-like activity. The Cu-NADH nanozyme had higher heat tolerance and catalytic efficiency than natural laccase, and its catalytic activity can be enhanced by high concentration of Cl ions and it is intensely inhibited by phosphate. Therefore, a colorimetric method based on Cu-NADH and indigo carmine was successfully developed to detect phosphate in water. This method showed an excellent selectivity for phosphate, and it had a linear relationship in the phosphate concentration range 2-50 μM with a detection limit of 0.37 μM. We believe that this example of coordination between metal ions and biomolecules to mimic natural enzymes can inspire more effective and alternative strategies in nanozyme design and expand their use in sensing and determination.

Ratiometric fluorescence for sensitive detection of phosphate species based on mixed lanthanide metal organic framework

Phosphate (PO₄^3-) plays a major role in aquatic ecosystems and biosystems. Developing a highly sensitive and selective ratiometric fluorescence probe for detection of PO₄^3- is of great significance to the ecological environment and human health. In this work, a novel dual lanthanide metal organic framework was synthesized via hydrothermal reaction based on Tb³⁺ and Ce³⁺ as the center metal ions and terephthalic acid as the organic ligand (designated as Tb-Ce-MOFs). The fluorescence of Tb-Ce-MOFs shows emission at 375 nm. In the presence of PO₄^3-, with increased concentration of PO₄^3-, the fluorescence intensity of Tb-Ce-MOFs at 500 nm and 550 nm increased, while the intensity at 375 nm was reduced. Hence, ratiometric fluorescence detecting of PO₄^3- can be achieved by measuring the ratio of fluorescence at 550 nm (FL₅₅₀) to 375 nm (FL₃₇₅) in the fluorescent spectra of the Tb-Ce-MOFs. In this sensing approach, the Tb-Ce-MOFs probe exhibits highly sensitive and selective for detection of PO₄^3-. The limit of detection is calculated to be 28 nM and the detection range is 0.1 to 10 μM. In addition, the Tb-Ce-MOFs were used in the detection of PO₄^3- in real samples. We design and synthesize a mixed lanthanide metal organic framework fluorescence probe (Tb-Ce-MOFs) for ratiometric fluorescence for the detection of PO₄^3- based on Tb³⁺ and Ce³⁺ as the center metal ions and terephthalic acid as the organic ligand.

Plastic electrode decorated with polyhedral anion tetrabutylammonium octamolybdate [N(C4H9)4]4 Mo8O26 for nM phosphate electrochemical detection

Inorganic phosphorous (as phosphate (PO₄^3-), is one of the essential nutrients for all living forms, either terrestrial or marine. In oligotrophic seawaters, this macronutrient is limited (10^-9 M) and its ratio with other elements (nitrogen or carbon) is denoting the health state of the marine environment; a small variation of its concentration can produce eutrophication. The gold standard method used for PO₄^3- detection is based on colorimetric detection of phosphomolybdate. The colored complex is obtained by mixing water-soluble molybdenum salts (Mo(VI)) and reducing agents in acid media, along with the sample containing PO₄^3-. Moreover, the kinetic of complex formation is slow, about 1 h is generally required for color to develop, exposing the assay to the drawbacks of interferences as those from silica. The detection is preferably performed in a controlled environment (i.e. in a laboratory) because several chemicals and steps of preparations are required as well as the optical instrumentation is not intended for in-field use. Electrochemical sensors offer portability and simplicity making them a practical option for on-site detection applications. To gain an analytical alternative in measuring low quantities of PO₄^3- (10^-9 M), and overcome some of the drawbacks of the classical approaches, we optimised a new easy way to produce a plastic electrode decorated with an alkyl Mo-polyoxometalate (Mo₈O₂₆^4-), that is soluble in organic solvents. This tetra-butyl-ammonium octamolybdate powder, [N (C4H9)4]4 Mo8O26, purposely synthetized was identified with FTIR, Raman, MS methods, and the electroactivity and reactivity with PO₄^3- was confirmed in solution with cyclic voltammetry (CV). When the Mo-decorated electrode was in contact with PO₄^3-, an electroactive phosphomolybdate aggregate formed at the electrode surface that was electrochemically detectable with square wave voltammetry (SWV). A remarkably low detection limit of 6.1 nM, to PO₄^3-, as well as good stability and selectivity were obtained also in real samples. In fact, PO₄^3- was measured in saline simulated and real seawater samples at nM concentrations in less than 5 min. The present investigation provides a new alternative to the current standard colorimetric methods to detect low phosphate concentrations, showing the potential to be used for monitoring nutrients in oligotrophic seawater.