Rashba Spin Splitting Limiting the Application of 2D Halide Perovskites for UV-Emitting Devices

Layered lead halide perovskites have attracted much attention as promising materials for a new generation of optoelectronic devices. To make progress in applications, a full understanding of the basic properties is essential. Here, we study 2D-layered (BA)2PbX4 by using different halide anions (X = I, Br, and Cl) along with quantum confinement. The obtained cell parameter evolution, supported by experimental measurements and theoretical calculations, indicates strong lattice distortions of the metal halide octahedra, breaking the local inversion symmetry in (BA)2PbCl4, which strongly correlates with a pronounced Rashba spin-splitting effect. Optical measurements reveal strong photoluminescence quenching and a drastic reduction in the PL quantum yield in this larger band gap compound. We suggest that these optical results are closely related to the appearance of the Rashba effect due to the existence of a local electric dipole. The results obtained in ab initio calculations showed that the (BA)2PbCl4 possesses electrical polarization of 0.13 μC/cm2 and spin-splitting energy of about 40 meV. Our work establishes that local octahedra distortions induce Rashba spin splitting, which explains why obtaining UV-emitting materials with high PLQY is a big challenge.

Novel Ultra-Stable 2D SbBi Alloy Structure with Precise Regulation Ratio Enables Long-Stable Potassium/Lithium-Ion Storage

The inferior cycling stabilities or low capacities of 2D Sb or Bi limit their applications in high-capacity and long-stability potassium/lithium-ion batteries (PIBs/LIBs). Therefore, integrating the synergy of high-capacity Sb and high-stability Bi to fabricate 2D binary alloys is an intriguing and challenging endeavor. Herein, a series of novel 2D binary SbBi alloys with different atomic ratios are fabricated using a simple one-step co-replacement method. Among these fabricated alloys, the 2D-Sb0.6 Bi0.4 anode exhibits high-capacity and ultra-stable potassium and lithium storage performance. Particularly, the 2D-Sb0.6 Bi0.4 anode has a high-stability capacity of 381.1 mAh g-1 after 500 cycles at 0.2 A g-1 (≈87.8% retention) and an ultra-long-cycling stability of 1000 cycles (0.037% decay per cycle) at 1.0 A g-1 in PIBs. Besides, the superior lithium and potassium storage mechanism is revealed by kinetic analysis, in-situ/ex-situ characterization techniques, and theoretical calculations. This mainly originates from the ultra-stable structure and synergistic interaction within the 2D-binary alloy, which significantly alleviates the volume expansion, enhances K+ adsorption energy, and decreases the K+ diffusion energy barrier compared to individual 2D-Bi or 2D-Sb. This study verifies a new scalable design strategy for creating 2D binary (even ternary) alloys, offering valuable insights into their fundamental mechanisms in rechargeable batteries.

Dual-ligand two-dimensional terbium-organic frameworks nanosheets for ratiometric fluorescence detection of phosphate

Here, we reported a ratiometric fluorescence strategy for the detection of phosphate (Pi) in artificial wetland water. The strategy was based on dual-ligand two-dimensional terbium-organic frameworks nanosheets (2D Tb-NB MOFs). 2D Tb-NB MOFs were prepared through blending 5-boronoisophthalic acid (5-bop), 2-aminoterephthalic acid (NH₂-BDC) and Tb³⁺ ions at room temperature in the presence of triethylamine (TEA). The dual-ligand strategy realized dual emission originated from ligand NH₂-BDC and Tb³⁺ ions at 424 and 544 nm, respectively. Pi could compete with ligands to coordinate Tb³⁺ due to the strong binding ability between Pi and Tb³⁺, resulting in structural destruction of 2D Tb-NB MOFs, so static quenching and antenna effect between ligands and metal ions were interrupted, and emission at 424 nm was enhanced and emission at 544 nm was weakened. This novel probe had excellent linearity with Pi concentrations from 1 to 50 μmol/L; the detection limit was 0.16 μmol/L. This work revealed that mixed ligands improved sensing efficiency of MOFs by enhancing the sensitivity of the coordination between the analyte and MOFs.

Transition-Metal Single Atom Anchored on MoS2 for Enhancing Photocatalytic Hydrogen Production of g-C3N4 Photocatalysts

Single-atom catalyst technology with near-100% atomic utilization and a well-defined coordination structure has provided new ideas for designing high-performance photocatalysts, which is also beneficial for reducing the usage of noble metal cocatalysts. Herein, a series of single-atomic MoS₂-based cocatalysts where monoatomic Ru, Co, or Ni modify MoS₂ (SA-MoS₂) for enhancing the photocatalytic hydrogen production performance of g-C₃N₄ nanosheets (NSs) are rationally designed and synthesized. The 2D SA-MoS₂/g-C₃N₄ photocatalysts with Ru, Co, or Ni single atoms show similar enhanced photocatalytic activity, and the optimized Ru₁-MoS₂/g-C₃N₄ photocatalyst has the highest hydrogen production rate of 11115 μmol/h/g, which is about 37 and 5 times higher than that of pure g-C₃N₄ and MoS₂/g-C₃N₄ photocatalysts, respectively. Experimental and density functional theory calculation results reveal that the enhanced photocatalytic performance is mainly attributed to the synergistic effect and intimate interface between SA-MoS₂ with well-defined coordination single-atomic structures and g-C₃N₄ NSs, which is conducive to the rapid interfacial charge transport, and the unique single-atomic structure of SA-MoS₂ with modified electronic structure and appropriate hydrogen adsorption performance offers abundant reactive sites for enhancing the photocatalytic hydrogen production performance. This work provides new insight into improving the cocatalytic hydrogen production performance of MoS₂ by a single-atomic strategy.

STM Study of the Initial Stage of Gold Intercalation of Graphene on Ir(111)

In this paper, we present a study of the sub-monolayer gold intercalation of graphene on Ir(111) using scanning tunnelling microscopy (STM). We found that Au islands grow following different kinetics than growth on Ir(111) without graphene. Graphene appears to increase the mobility of Au atoms by shifting the growth kinetics of Au islands from dendritic to a more compact shape. Graphene on top of intercalated gold exhibits a moiré superstructure, with parameters significantly different from graphene on Au(111) but almost identical to graphene on Ir(111). The intercalated Au monolayer shows a quasi-herringbone reconstruction with similar structural parameters as on Au(111).

Identification and Expression Profiling of Two Saudi Arabia Catalase Genes from Wheat and Barley in Response to Abiotic and Hormonal Stresses

Catalase is a crucial enzyme in antioxidant defense systems protecting eukaryotes from oxidative stress. These proteins are present in almost all living organisms and play important roles in controlling plant responses to biotic and abiotic stresses by catalyzing the decomposition of H₂O₂. Despite their importance, little is known about their expression in the majority of monocotyledonous species. Here, we isolated and characterized two novel catalase genes from Triticum turgidum and Hordeum vulgare, designated as TtCAT1 and HvCAT1, respectively. Phylogenetic analysis revealed that TtCAT1 and HvCAT1 presented 492 aa and shared an important identity with other catalase proteins belonging to subfamily 1. Using bioinformatic analysis, we predicted the 3D structure models of TtCAT1 and HvCAT1. Interestingly, analysis showed that the novel catalases harbor a peroxisomal targeting signal (PTS1) located at their C-terminus portion, as shown for other catalase proteins. In addition, this motif is responsible for the in silico peroxisomal localization of both proteins. Finally, RT-qPCR analysis showed that TtCAT1 and HvCAT1 are highly expressed in leaves in normal conditions but faintly in roots. Moreover, both genes are upregulated after the application of different stresses such as salt, osmotic, cold, heavy metal, and hormonal stresses. The positive responses of TtCAT1 and HvCAT1 to the various stimuli suggested that these proteins can help to protect both species against environmental stresses.

Mussel-Inspired Surface Modification of α-Zirconium Phosphate Nanosheets for Anchoring Efficient and Reusable Ultrasmall Au Nanocatalysts

The shortage of powerful functionalities on scalable α-zirconium phosphate (ZrP) materials blocks the facile preparation of highly dispersed and immobilized metal nanocatalysts. We herein present a mild and facile mussel-inspired strategy based on polydopamine (PDA) for the surface modification of ZrP, and hence, the generation of powerful functionalities at a high density for the straightforward reduction of chloroauric acid to Au nanoparticles (AuNPs) and the immobilization of AuNPs. The resulting ternary ZrP@PDA/Au exhibited ultra-small AuNPs with a particle size of around 6.5 nm, as estimated based on TEM images. Consequently, the ZrP@PDA/Au catalyst showed significant activity in the catalytic conversion of 4-nitrophenol (4NP) to 4-aminophenol (4AP), a critical transformation reaction in turning the hazard into valuable intermediates for drug synthesis. The PDA was demonstrated to play a critical role in the fabrication of the highly efficient ZrP@PDA/Au catalyst, far outperforming the ZrP/Au counterpart. The turnover frequency (TOF) achieved by the ZrP@PDA/Au reached as high as 38.10 min^-1, much higher than some reported noble metal-based catalysts. In addition, the ZrP@PDA/Au showed high stability and reusability, of which the catalytic efficiency was not significantly degraded after prolonged storage in solution.

Facile synthesis of dual-ligand terbium-organic gels as ratiometric fluorescence probes for efficient mercury detection

Mercury (Hg) pollution can negatively impact ecosystems, and there is a need for simple Hg²⁺ monitoring platforms. Here, a dual-ligand fluorescence probe based on terbium-organic gels (Tb-L_0.2P_0.8 MOGs) was constructed for efficient Hg²⁺ detection. Tb-L_0.2P_0.8 MOGs were developed through a facile room-temperature gelation method, showing two emission peaks derived from luminol and Tb³⁺ at 424 nm and 544 nm, respectively. The aggregation-induced emission (AIE) effect between luminol and Tb³⁺ led to luminol with blue fluorescence. However, Hg²⁺ could dramatically quench the fluorescence signal of luminol at 424 nm because of the intense coordination interaction of Hg²⁺ with luminol and photo-induced electron transfer (PET). The Phen ligand could sensitize the luminescence of Tb³⁺ and offer a reference fluorescence, thus resulting in a unique ratiometric fluorescence response toward Hg²⁺. This novel nanoprobe had excellent linearity with Hg²⁺ concentrations range of 0.1-30 μM; the detection limit was 3.6 nM. The analysis of real samples showed the potential application of MOGs for measuring Hg²⁺ in porphyra and tap water. Mixed ligands were introduced for high-efficiency strategies to improve the analytical performance by regulating the emission behavior of MOGs.

Highly Efficient Synthesis of p-Benzoquinones Catalyzed by Robust Two-Dimensional POM-Based Coordination Polymers

Selective oxidation of alkyl-substituted phenols offers efficient access to p-benzoquinones (BQs) that serve as key components for synthesizing biologically active compounds, but rational manufacture of efficient recyclable catalysts for such a reaction remains a severe challenge. Herein, two crystalline 2D polyoxometalate-based coordination polymers (POMCPs), formulated as H₃[Cu^I₃(L)₃]₂[PM₁₂O₄₀]·xH₂O (M = Mo, x = 4 for 1; M = W, x = 6 for 2; and HL = 4-(1H-tetazol-5-yl)pyridine), are prepared by a mineralizer-assisted one-step synthesis strategy and explored as heterogeneous catalysts for p-BQs synthesis. Both compounds have been characterized through elemental analysis, EDS analysis, infrared spectroscopy, UV-vis diffuse reflectance spectrum, EPR, XPS, BET, single-crystal, and powder X-ray diffraction. Single-crystal X-ray diffraction analysis indicates that both 1 and 2 exhibit an interesting 2D sheet structure composed of 2-connected Keggin type anions [PM₁₂O₄₀]^3- and hexa-nuclear {Cu^I₆(HL)₆} cluster-based metal-organic chains via Cu···O interactions. When used as catalysts, POMCPs 1 and 2 have excellent catalytic activities in the selective oxidation of substituted phenols to p-BQs with H₂O₂. Notedly, in the model reaction from 2,3,6-trimethylphenol (TMP) to the vitamin E key intermediate trimethyl-p-benzoquinone (TMBQ), the catalytic activities expressed by turnover frequency (TOF) of 1 and 2 can reach an unprecedented 2400 and 2000 h^-1, respectively, at close to 100% TMBQ yield. The truly heterogeneous nature, stability, and structural integrity of both catalysts were ascertained by FTIR, PXRD techniques, and the following cycles. Mechanism studies reveal that both catalysts can involve a dual reaction pathway through a heterolytic oxygen atom transfer mechanism and homolytic radical mechanism. Moreover, the 2D POMCPs with highly accessible bilateral active sites and efficient mass transfer efficiency possess superior catalytic performance to their analogous 3D species.

Visible-Light-Responsive Nanofibrous α-Fe2O3 Integrated FeOx Cluster-Templated Siliceous Microsheets for Rapid Catalytic Phenol Removal and Enhanced Antibacterial Activity

Visible-light-driven environmental contaminants control using 2D photocatalytic nanomaterials with an unconfined reaction-diffusion path is advantageous for public health. Here, cost-effective siliceous composite microsheets (FeSiO-MS) combined with two distinct refined α-Fe₂O₃ nanospecies as photofunctional catalysts were constructed via a one-pot synthesis approach. Through precise control of Fe²⁺ precursor addition, specially configured α-Fe₂O₃ nanofibers combined with FeOx cluster-functionalized siliceous microsheets of ∼15 nm gradually evolved from the iron oxide-bearing molecular sieve, endowing a superior light-response characteristic of the formed nanocomposite. The catalytic experiment along with the ESR study demonstrated that the produced FeSiO-MS showed reinforced photo-Fenton reactivity, which was effective for rapid phenol degradation under visible light radiation. Moreover, the phenol removal process was found to be regulated by the specially configured types and concentrations of iron oxides. Notably, the obtained composites exhibited a considerable visible-light-induced bactericidal effect against E. coli. The constructed FeSiO-MS nanocomposites as integrated and eco-friendly photocatalysts exhibit enormous potentials for environmental and hygienic application.

Microwave-Assisted Synthesis of Zirconium Phosphate Nanoplatelet-Supported Ru-Anadem Nanostructures and Their Catalytic Study for the Hydrogenation of Acetophenone

The catalytic hydrogenation of organic compounds containing carbonyl groups has been extensively studied and widely used in industrial processes. Herein, we report the preparation of a novel nanomaterial, α-zirconium phosphate (α-ZrP) nanoplatelet-supported ruthenium nano-anadem catalyst, which possesses high selectivity in the catalytic hydrogenation of aromatic ketones. The α-ZrP nanoplatelets were prepared using a modified reflux method. Through an ion-exchange and reduction reaction pathway, ruthenium nanoparticles were loaded on ZrP to produce Ru-ZrP with a nano-anadem structure. The successful synthesis of Ru-ZrP composites is supported by a series of characterization techniques (PXRD, SEM, TEM, EDS, XPS, FT-IR, etc.). Compared with pure ZrP nanoplatelets, the catalytic hydrogenation of acetophenone has been dramatically improved when using Ru-ZrP. Full conversion was achieved at room temperature, and the yield of 1-cyclohexylehtanol was up to 95%. The effects of reaction time, reaction temperature, and hydrogen pressure were investigated. The investigation illustrates that there are two proposed reaction pathways in the hydrogenation of acetophenone, which are further supported by computational analyses. Recycling experiments indicate that the Ru-ZrP material could be reused four times without a noticeable activity decrease.

Structural analysis of leucine, lysine and tryptophan mitochondrial tRNA of nesting turtles Caretta caretta (Testudines: Chelonioidea) in the Colombian Caribbean

The understanding of the functional properties of mitochondrial transfer RNA (mt tRNAs) depend on the knowledge of its structure. tRNA acts as an interface between polynucleotides and polypeptides thus, they are key molecules in protein biosynthesis. The tRNA molecule has a functional design and, given its importance in the translation of mitochondrial genes, it is plausible that modifications of the structure can affect the synthesis of proteins and the functional properties of the mitochondria. In a previous work, the mitochondrial genome of an individual of the nesting Caretta caretta of the Colombian Caribbean was obtained, where specific mutations were identified in the only tRNALeu (CUN), tRNATrp and tRNALys genes. In order to analyze the effect of these mutations on these three mt tRNAs, the prediction of 2D and 3D structures was performed. Genes were sequenced in 11 nesting loggerhead turtles from the Colombian Caribbean. Two-dimensional structures were inferred using the ARWEN program, and three-dimensional structures were obtained with the RNA Composer 3D program. Two polymorphisms were identified in tRNATrp and another one was located in tRNALys, both specific to C. caretta. The thymine substitution in nucleotide position 14 of tRNATrp could constitute an endemic polymorphism of the nesting colony of the Colombian Caribbean. Two 2D and three 3D patterns were obtained for tRNATrp. In the case of tRNALys and tRNALeu 2D and 3D structures were obtained respectively, which showed compliance to canonical structures, with 4 bp in the D-arm, 4-5 bp in the T-arm, and 5 bp in the anticodon arm. Moderate deviations were found, such as a change in the number of nucleotides, elongation in loops or stems and non-Watson-Crick base pairing: adenine-adenine in stem D of tRNATrp, uracil-uracil and adenine-cytosine in the acceptor arm of the tRNALys and cytosine-cytosine in the anticodon stem of the tRNALeu. In addition, distortions or lack of typical interactions in 3D structures gave them unique characteristics. According to the size of the variable region (4-5 nt), the three analyzed tRNAs belong to class I. The interactions in the three studied tRNAs occur mainly between D loop-variable region, and between spacer bases-variable region, which classifies them as tRNA of typology II. The polymorphisms and structural changes described can, apparently, be post-transcriptionally stabilized. It will be crucial to perform studies at the population and functional levels to elucidate the synthetic pathways affected by these genes. This article analyses for the first time the 1D, 2D and 3D structures of the mitochondrial tRNALys, tRNATrp and tRNALeu in the loggerhead turtle.

Tunable electronic structures and half-metallicity in two-dimensional InSe functionalized with magnetic superatom

Based on first-principles calculations, we investigate the geometric, energetic and electronic properties of two-dimensional (2D) InSe functionalized with magnetic superatoms (MnCl3). As a nonmagnetic semiconductor, 2D InSe exhibits non-covalent interaction with MnCl3and provides an ideal substrate for the assembly of magnetic superatoms. We show that with a low coverage of MnCl3, the functionalized system behaves as a magnetic semiconductor with spin-polarized superatomic states residing inside the energy gap of InSe. When the coverage becomes higher, the system has one spin channel crossing Fermi level while the other remains insulating, thus being half-metallic. We further demonstrate electric field effects on the functionalized system, and reveal that half metal with 100% spin polarization can be achieved at a lower coverage due to the field induced charge transfer, which downshifts the unoccupied bands of one spin component so that they become partially filled. These findings are generally applicable, demonstrating the great promise of combining superatom assembly with electric gating for controllable and versatile 2D spintronics.

Tetraethylenepent-MAPbI3-xClx Unsymmetrical Structure-Enhanced Stability and Power Conversion Efficiency in Perovskite Solar Cells

Two-dimensional (2D) perovskite solar cell (PSC) can achieve high stability by alternating interface cations. However, its main transmissive charge is limited owing to the 2D structure. Therefore, compared with a 3D device, the 2D PSC has poor power conversion efficiency (PCE). Further enhanced performance will require an increase in the transmission dimension of 2D PSC. Here, a novel tetraethylenepent (TEPA)-MAPbI_3-xCl_x analogous 2D unsymmetrical perovskite film was developed to improve the stability and PCE of the corresponding device. Based on the interaction of the active amino linear short chain of TEPA and the halogen ion, the symmetry of the mechanical structure of ions is disrupted, and the TEPA ion is embedded in the perovskite structure to form a perovskite structure with a dimension between 3D and 2D. Noticeably, the TEPA-MAPbI_3-xCl_x devices deliver high PCEs up to 19.73% which stands as the highest for MAPbI_3-xCl_x-based PSC. The environmental, thermal, and illumination stability also showed improvements ranging between 10%-30%. The enhanced PSCs are due to the higher quality of perovskite films, stronger charge transmission, and less trap density. This approach provides a new method to improve and modify 2D PSCs.

Ellipse packing in two-dimensional cell tessellation: a theoretical explanation for Lewis's law and Aboav-Weaire's law

Background

Lewis’s law and Aboav-Weaire’s law are two fundamental laws used to describe the topology of two-dimensional (2D) structures; however, their theoretical bases remain unclear.

Methods

We used R software with the Conicfit package to fit ellipses based on the geometric parameters of polygonal cells of ten different kinds of natural and artificial 2D structures.

Results

Our results indicated that the cells could be classified as an ellipse’s inscribed polygon (EIP) and that they tended to form the ellipse’s maximal inscribed polygon (EMIP). This phenomenon was named as ellipse packing. On the basis of the number of cell edges, cell area, and semi-axes of fitted ellipses, we derived and verified new relations of Lewis’s law and Aboav-Weaire’s law.

Conclusions

Ellipse packing is a short-range order that places restrictions on the cell topology and growth pattern. Lewis’s law and Aboav-Weaire’s law mainly reflect the effect of deformation from circle to ellipse on cell area and the edge number of neighboring cells, respectively. The results of this study could be used to simulate the dynamics of cell topology during growth.

SugarSketcher: Quick and Intuitive Online Glycan Drawing

SugarSketcher is an intuitive and fast JavaScript interface module for online drawing of glycan structures in the popular Symbol Nomenclature for Glycans (SNFG) notation and exporting them to various commonly used formats encoding carbohydrate sequences (e.g., GlycoCT) or quality images (e.g., svg). It does not require a backend server or any specific browser plugins and can be integrated in any web glycoinformatics project. SugarSketcher allows drawing glycans both for glycobiologists and non-expert users. The "quick mode" allows a newcomer to build up a glycan structure having only a limited knowledge in carbohydrate chemistry. The "normal mode" integrates advanced options which enable glycobiologists to tailor complex carbohydrate structures. The source code is freely available on GitHub and glycoinformaticians are encouraged to participate in the development process while users are invited to test a prototype available on the ExPASY web-site and send feedback.

A Novel Lipopeptaibol Emericellipsin A with Antimicrobial and Antitumor Activity Produced by the Extremophilic Fungus Emericellopsis alkalina

Soil fungi are known to contain a rich variety of defense metabolites that allow them to compete with other organisms (fungi, bacteria, nematodes, and insects) and help them occupy more preferential areas at the expense of effective antagonism. These compounds possess antibiotic activity towards a wide range of other microbes, particularly fungi that belong to different taxonomical units. These compounds include peptaibols, which are non-ribosomal synthesized polypeptides containing non-standard amino acid residues (alpha-aminoisobutyric acid mandatory) and some posttranslational modifications. We isolated a novel antibiotic peptide from the culture medium of Emericellopsis alkalina, an alkalophilic strain. This peptide, called emericellipsin A, exhibited a strong antifungal effect against the yeast Candida albicans, the mold fungus Aspergillus niger, and human pathogen clinical isolates. It also exhibited antimicrobial activity against some Gram-positive and Gram-negative bacteria. Additionally, emericellipsin A showed a significant cytotoxic effect and was highly active against Hep G2 and HeLa tumor cell lines. We used NMR spectroscopy to reveal that this peptaibol is nine amino acid residues long and contains non-standard amino acids. The mode of molecular action of emericellipsin A is most likely associated with its effects on the membranes of cells. Emericellipsin A is rather short peptaibol and could be useful for the development of antifungal, antibacterial, or anti-tumor remedies.

2D MoS2 Nanostructures for Biomedical Applications

MoS₂ nanosheets, a typical kind of layered transition metal dichalcogenides with the 2D structure and many unique physical and chemical properties, have attracted a lot of research interests in various fields. Typically, MoS₂ nanosheets present similarities to graphene in terms of their large surface area and strong absorbance in near-infrared region, which in combination with their easily functionalized surface make them promising nanoplatforms in biomedical applications. Herein, the progress of MoS₂ nanosheets and their composites in the area of nanomedicine, with the emphasis on their synthesis and modification strategies, their biomedical applications in biosensing, imaging and therapy, as well as evaluations of their in vivo behaviors and toxicology profiles are summarized. Finally, the challenges and opportunities of applying MoS₂ -based nanomaterials in the biomedicine areas will be discussed.

Study of Graphene Oxide Structural Features for Catalytic, Antibacterial, Gas Sensing, and Metals Decontamination Environmental Applications

This study represents a comprehensive review about the structural features of graphene oxide (GO) and its significance in environmental applications. Two dimensional (2D) GO is tremendously focused in advanced carbon-based nanomaterials for environmental applications due to its tunable physicochemical characteristics. Herein, we report foundational structural models of GO and explore the chemical bonding of oxygen moieties, with graphite basal plane using various characterization tools. Moreover, the impact of these oxygen moieties and the morphology of GO for environmental applications such as removal of metal ions and catalytic, antibacterial, and gas sensing abilities have here been critically reviewed for the first time. Environmental applications of GO are highly significant because, in the recent era, the fast progress of industries, even in the countryside, results in air and water pollution. GO has been widely investigated by researchers to eradicate such environmental issues and for potential industrial and clinical applications due to its 2D structural features, large surface area, presence of oxygen moieties, nonconductive nature, intense mechanical strength, excellent water dispersibility, and tunable optoelectronic properties. Thence, particular emphasis is directed toward the modification of GO by varying the number of its oxygen functional groups and by coupling it with other exotic nanomaterials to induce unique properties in GO for potential environmental remediation purposes.