Highly sensitive determination of 4-nitrophenol with coumarin-based fluorescent molecularly imprinted poly (ionic liquid)

Advances in 4-Nitrophenol Detection and Reduction Methods and Mechanisms: An Updated Review

This review emphasizes the progress in identifying and eliminating para-nitrophenol (4-NP), a toxic organic compound. It covers various strategical methods and materials, including organic and inorganic nanomaterials, for detecting and reducing 4-NP. Detection techniques such as electrochemical methods. Optical fiber-based surface plasmon resonance and photoluminescence, as well as the mechanisms of Förster Resonance Energy Transfer (FRET) and Inner Filter Effect (IFE) in fluorescence detection, are presented. Removal techniques for this contaminant include homogeneous catalysis, electrocatalysis, photocatalysis, and thermocatalysis, and their reaction mechanisms are also discussed. Further, the theoretical perspectives of 4-NP detection and reduction, parameters influencing the activities, and future perspectives are also reviewed in detail.

A molecularly imprinted ratiometric fluorescent sensor for visual detection of 1-naphthol based on fluorescence-enhanced CdTeS QDs via APTES modification

CdTeS quantum dots (CdTeS QDs) were synthesized using the hydrothermal method and subsequently modified with (3-aminopropyl)triethoxysilane (APTES). This modification resulted in a significant enhancement of the fluorescence intensity, which was observed to be five times stronger than that of unmodified CdTeS QDs at 597 nm. Only after the fluorescence enhancement by APTES modification, the material showed a response to 1-naphthol (1-NP). Based on this, the molecularly imprinted polymers (MIPs) with ratiometric fluorescence were developed for the detection of 1-NP, that is, the synthetic raw material and the metabolite of the pesticide carbaryl. Under the excitation of 365 nm UV, the bright orange-red fluorescence (597 nm) of CdTeS QDs encapsulated in MIPs was quenched by 1-NP in the suspension, and 1-NP showed a gradually increasing blue emission (460 nm) with the increase of its concentration. This sensor has a good linear relationship between fluorescence intensity ratio (F460/F597) and 1-NP concentration (C1-NP) in a large concentration range (6.0-140.0 µM, LOD=0.45 µM, RSD<4.41%). It exhibits a visible fluorescence change from orange-red to blue-purple. Excellent recoveries in real samples were obtained by simulating carbaryl metabolism and demonstrated its potential in detection of 1-NP and carbaryl.

Fabrication and characterization of magnetic mesoporous nanoparticles for efficient determination and magnetic separation of sulfonamides in food samples

A magnetic, mesoporous core/shell structured Fe3O4@SiO2@mSiO2 nanocomposite was synthesized and employed as a magnetic solid phase extraction (MSPE) sorbent for the determination of trace sulfonamides (SAs) in food samples. The synthesized nanocomposite was characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, X-ray diffraction, N2 sorption analysis and vibrating sample magnetometry. The results showed that Fe3O4@SiO2@mSiO2 possessed a mesoporous structure with a large surface area. Batch experiments were carried out to investigate the adsorption ability for SAs. Fe3O4@SiO2@mSiO2 showed fast kinetics and high adsorption capacity, and the pseudo-second-order model and Langmuir adsorption isotherm are well fitted with the experimental data, indicating that chemical adsorption might be the rate-limiting step. Moreover, the high adsorption capacity can be maintained for at least 8 runs, indicating excellent stability and reusability. The proposed method exhibited good linearity in the range of 0.2-500 μg L-1, the R2 values of all the analytes were greater than 0.99 and the LODs were all lower than 0.2 μg L-1. Furthermore, real food samples were successfully analyzed with Fe3O4@SiO2@mSiO2 and high recoveries varying from 89.7% and 110.6% were obtained with low relative standard deviations ranging from 1.78% to 6.91%. The Fe3O4@SiO2@mSiO2 magnetic nanocomposite is a promising sorbent for the efficient extraction of SAs from complex food samples.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

One-step synthesis of N, S-doped carbon dots with green emission and their application in 4-NP detection, pH sensing, and cell imaging

Using p-aminophenol and dithioacetamide as precursors, green luminescent nitrogen (N) and sulfur (S) co-doped carbon dots (N, S-CDs) are prepared by hydrothermal method with the quantum yield (QY) of 7.1 %. Superior properties of the N, S-CDs including high photostability, outstanding biocompatibility, and desirable biological penetration were found, which could realize the monitor of 4-nitrophenol (4-NP) and pH. The N, S-CDs can be designed as a fluorescent probe for sensitive detection of 4-NP in water samples with linear ranges of 0-85 µM and a detection limit of 0.037 µM. Moreover, the fluorescence intensity of N, S-CDs is sensitive to pH and shows a linear relationship with pH values ranging from 3.50 to 7.25 and 7.25-12.00, accompanied with a significant color variation of the N, S-CDs solution from colorless to brown. Finally, the proposed N, S-CDs have also been applied to monitor the 4-NP in oocysts due to its low cytotoxicity, providing a great capacity for various targets molecules detection.

Fluorescence detection of 4-nitrophenol and α-glucosidase activity based on 4-nitrophenol-regulated fluorescence of silicon nanoparticles

A fluorescence assay for the detection of 4-nitrophenol (4-NP), α-glucosidase (α-Glu) activity and α-Glu inhibitors (AGIs) is developed based on the inner filter effect (IFE), a flexible and simple signal transfer strategy. In this assay, silicon nanoparticles (Si NPs) synthesized under mild and easily accessible conditions are employed as fluorescent indicators. 4-NP efficaciously quenches the fluorescence of Si NPs through the IFE at a very rapid rate, thus achieving 4-NP detection in a mix-to-read manner, which is suitable for on-site detection. The quenching mechanism has been comprehensively studied and confirmed. More significantly, based on the fact that 4-NP can be generated through α-Glu-catalyzed hydrolysis of 4-nitrophenyl-α-D-glucopyranoside (NPG), the fluorescence detection of α-Glu activity is legitimately achieved by employing NPG as the substrate. The linear ranges for 4-NP and α-Glu activity detection are 0.5-60 μM and 0.5-60 mU mL-1 with low detection limits of 0.074 μM and 0.094 mU mL-1, respectively. This method not only can preciously assay targets in real samples, but is also capable of screening AGIs as drugs as well as assessing their inhibition efficiency.

Synthesis of Multifused Pyrrolo[1,2-a]quinoline Systems by Tandem Aza-Michael-Aldol Reactions and Their Application to Molecular Sensing Studies

Herein, we have presented a weak acid-promoted tandem aza-Michael-aldol strategy for the synthesis of diversely fused pyrrolo[1,2-a]quinoline (tricyclic to pentacyclic scaffolds) by the construction of both pyrrole and quinoline ring in one pot. The described protocol fabricated two C-N bonds and one C-C bond in the pyrrole-quinoline rings which have been sequentially formed under transition-metal-free conditions by the extrusion of eco-friendly water molecules. A ketorolac drug analogue has been synthesized following the current protocol, and one of the synthesized tricyclic pyrrolo[1,2-a]quinoline fluorophores has been used to detect highly toxic picric acid via the fluorescence quenching effect.

A highly efficient molecularly imprinted fluorescence sensor for assessing whole wheat grains by the rapid and sensitive detection of alkylresorcinols

To differentiate whole wheat foods from refined wheat foods is still challenging grain industry and confusing consumers. Alkylresorcinols (ARs), as biomarkers of whole wheat grains, can serve for assessing the authenticity of whole wheat foods. Herein, a highly efficient fluorescence sensing platform (CDs@MIP) for rapid and sensitive analysis of ARs was explored, using carbon dots (CDs) as fluorophores and 5-heneicosylresorcinol (C21:0 AR) as template molecules embedded in a molecularly imprinted polymer (MIP) coating. Benefiting from the specific cavities in the probe and a photo-induced electron transfer effect, the fluorescence intensity of CDs@MIP was significantly quenched in the presence of C21:0 AR, exhibiting a superior binding efficiency and selectivity. As a result, the fabricated optical sensor delivered a wide linear range of C21:0 AR from 0.015 to 60 μg mL-1 with an ultralow detection limit of 4 ng mL-1. It was noteworthy that the sensor was successfully applied for the rapid detection of C21:0 AR in commercial whole-wheat foods as well as visualization analysis on the test paper, comprehensively validating the practicality and efficacy of CDs@MIP based fluorescence assay. The study provides a rapid and sensitive detection method of C21:0 AR, paving a new way for guiding grain industry to effectively qualify the authenticity and to quantify the content of whole wheat in wheat-based foods.

Molecularly Imprinted Polymer-Based Luminescent Chemosensors

Molecularly imprinted polymer (MIP)-based luminescent chemosensors combine the advantages of the highly specific molecular recognition of the imprinting sites and the high sensitivity with the luminescence detection. These advantages have drawn great attention during the past two decades. Luminescent molecularly imprinted polymers (luminescent MIPs) towards different targeted analytes are constructed with different strategies, such as the incorporation of luminescent functional monomers, physical entrapment, covalent attachment of luminescent signaling elements on the MIPs, and surface-imprinting polymerization on the luminescent nanomaterials. In this review, we will discuss the design strategies and sensing approaches of luminescent MIP-based chemosensors, as well as their selected applications in biosensing, bioimaging, food safety, and clinical diagnosis. The limitations and prospects for the future development of MIP-based luminescent chemosensors will also be discussed.

Hydrothermal Synthesis of MnO2/Reduced Graphene Oxide Composite for 4-Nitrophenol Sensing Applications

Recently, the electrochemical sensing approach has attracted materials/electrochemical scientists to design and develop electrode materials for the construction of electrochemical sensors for the detection of para-nitrophenol (4-NP). In the present study, we have prepared a hybrid composite of MnO2 and rGO (MnO2/rGO) using a hydrothermal approach. The morphological features of the prepared MnO2/rGO composite were studied by scanning electron microscopy, whereas the phase purity and formation of the MnO2/rGO composite were authenticated via the powder X-ray diffraction method. Energy-dispersive X-ray spectroscopy was also employed to analyze the elemental composition of the prepared MnO2/rGO composite. In further studies, a glassy carbon electrode (GCE) was modified with MnO2/rGO composite (MnO2/rGO/GCE) and explored as 4-nitrophenol (4-NP) sensor. The fabricated MnO2/rGO/GCE exhibited a reasonably good limit of detection of 0.09 µM with a sensitivity of 0.657 µA/µMcm2. The MnO2/rGO/GCE also demonstrates good selectivity, stability and repeatability in 50 cycles.

Ultrasonic assisted preparation of ultrafine Pd supported on NiFe-layered double hydroxides for p-nitrophenol degradation

NiFe-layered double hydroxide (NiFe-LDH)-loaded ultrafine Pd nanocatalysts (Pd/NiFe-LDHs) were prepared by a facile ultrasonic-assisted in situ reduction technology without any stabilizing agents or reducing agents. Pd/NiFe-LDHs were characterized by FT-IR, XRD, XPS, and TEM. PdNPs are uniformly dispersed on NiFe-LDHs with a particle size distribution of 0.77-2.06 nm and an average particle size of 1.43 nm. Hydroxyl groups in Fe-OH and Ni-OH were dissociated into hydrogen radicals (·H) excited by ultrasound, and ·H reduced Pd²⁺ to ultrafine PdNPs. Then, Pd was coordinated with O in Ni-O and Fe-O, which improved the stability of the catalysts. Pd/NiFe-LDHs completely degraded 4-NP in 5 min, and the TOF value was 597.66 h^-1, which was 16.7 times that of commercial Pd/C. The 4-NP conversion rate remained at 98.75% over Pd/NiFe-LDHs after 10 consecutive catalytic cycles. In addition, the catalyst also has high catalytic activity for the reduction of Congo red, methylene blue, and methyl orange by NaBH₄.

Kill two birds with one stone: Selective and fast removal and sensitive determination of oxytetracycline using surface molecularly imprinted polymer based on ionic liquid and ATRP polymerization

Oxytetracycline (OTC) residue in food and environment has potential threats to ecosystem and human health, thus its sensitive monitoring and effective elimination are very important. In this work, a new molecularly imprinted polymer (MIP) composite was prepared through atom transfer radical polymerization by using OTC as template, gold nanoparticles modified carbon nanospheres (Au-CNS) as supporter, ionic liquids (IL) as functional monomer and cross-linking agent. The obtained MIP-IL@Au-CNS composite was characterized by Fourier transform infrared absorption spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. It displayed high imprinting factor (5.50) and adsorption capacity (56.7 mg g^-1), and could achieved the adsorption equilibrium in short time (about 15 min). Results also illustrated that the adsorption process basically conformed to the quasi-second-order kinetic model and Freundlich model, and MIP-IL@Au-CNS could be recycled at least 5 times. Furthermore, a sensitive OTC electrochemical sensor was developed by combining MIP-IL@Au-CNS with IL-modified carbon nanocomposites (IL@N-rGO-MWCNT). The resulting sensor demonstrated a linear response to OTC in the wide range of 0.02-20 μM, and the detection limit was down to 5 nM. It also had the advantages of high selectivity, fast elution/regeneration and simple construction procedure. The sensor had been applied to the detection of real samples, and acceptable recovery (96.4%-106%) and RSD (3.2%-6.2%) were obtained. This work expands the application of IL-based MIP in pollutant monitoring and enriching.

Design of a naphthalimide-based probe for acrolein detection in foods and cells

Acrolein is a highly toxic agent that can be generated exogenously and endogenously. Therefore, a highly specific and sensitive probe for acrolein with potential applications in acrolein detection must be developed. In this research, a novel fluorescent probe named "probe for acrolein detection" (Pr-ACR) was designed and synthesized based on a naphthalimide fluorophore skeleton, and a thiol group (-SH) was introduced into its structure for acrolein recognition. The -SH traps acrolein via Michael addition and the resultant interaction product of the probe inhibits the photoinduced electron transfer process and produce a strong fluorescence at 510 nm. The probe showed high sensitivity and specificity for acrolein. HPLC-MS/MS analysis verified that it can be used to quantify acrolein in foods, such as soda crackers, red wine, and baijiu, with a fluorescence spectrophotometer. After methyl esterification, the methyl esterified probe (mPr-ACR) successfully visualised acrolein in Hela cells under a laser scanning confocal microscope. This finding proved that Pr-ACR and mPr-ACR are potential tools for the detection and visualisation of acrolein from different sources.

Aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) synthesized by a one-pot method for sensitively detecting 4-nitrophenol

An aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) (AIE-FMIPIL) was synthesized for the first time with an AIE probe 4-(1,2,2-triphenylvinyl)phenyl acrylate (TPE), and an ionic liquid as dual functional monomers, and an ionic liquid as cross-linker. AIE-FMIPIL displayed a sphere-like shape and its average diameter was 410 nm. The absolute quantum yields of TPE and AIE-FMIPIL were 9.23% and 12.61%, respectively. The synergetic effect of TPE in the AIE-FMIPIL framework contributed to the higher quantum yield of AIE-FMIPIL. 4-Nitrophenol (4-NP) efficiently quenched AIE-FMIPIL with high fluorescence based on the Förster resonance energy transfer mechanism. The synthesized AIE-FMIPIL sensor was highly sensitive for 4-NP detection (linear range, 0.02-1.5 μM) in the optimal detection condition, with a low detection limit of 10 nM (S/N = 3). AIE-FMIPIL showed increased sensitivity and quenching efficiency compared with AIE-FMIP comprising a traditional monomer and cross-linker. AIE-FMIPIL exhibited selective binding to 4-NP because of the imprinted sites. AIE-FMIPIL was adopted to detect 4-NP in environmental samples.

Double-site-based a smart fluorescent sensor for logical detecting of sulphides and its imaging evaluation of living organisms

Thiophenol and hydrosulphite are a group of toxic environmental pollutants, which contaminate land, water and food exhibiting a serious risk to human health. Herein, we reported a xanthene dye-based sensor (DSF) with dual well-known response sites for visual detecting PhSH and HSO₃^-. Specifically, when DSF reacted with PhSH firstly, the color of the solution changed to blue with bright red fluorescence emission. After added with HSO₃^-, the color of the solution became yellow, and emitted yellow fluorescence signal. However, DSF was first added with HSO₃^-, the color of the solution changed to purple with no-fluorescence emission, and then PhSH was added, the color of the solution changed to yellow with a bright yellow fluorescence. Notably, DSF exhibited high sensitivity and selectivity for PhSH and HSO₃^- detection with a very low detection limits of 2.27 nM and 22.91 nM, respectively. More importantly, DSF could detect PhSH and HSO₃^- in water, real-food and biological systems. Therefore, the experimental results showed DSF as a robust new logical monitoring tool for the detection of PhSH and HSO₃^- in water, real-food samples and biological systems.

Recyclable Magnetic Fluorescence Sensor Based on Fe3O4 and Carbon Dots for Detection and Purification of Methcathinone in Sewage

Sensitive, rapid, and low-cost detection of drug traces in sewage is very important for drug monitoring and control. In this study, a dual functional and recyclable magnetic fluorescent molecularly imprinted polymers (MFMIPs) sensor with high sensitivity for rapid detection and purification of methcathinone in sewage was developed. MFMIPs was prepared via molecular imprinting and conjugation with carbon dots as a fluorescent reporter on Fe₃O₄ (Fe₃O₄-MIPs@CDs). With strong recognition and adsorption toward methcathinone by the specific cavities on the surface of MFMIPs, the fluorescence of the sensor could dramatically be quenched once anchored with methcathinone. Under optimal conditions, the MFMIPs sensor presented high sensitivity with a linear range of 0.5-100 nM and a detection limit of 0.2 nM, which would be used to monitor drug prevalence and consumption within a certain region. This sensor was applied to the assay of methcathinone in sewage samples collected from Yuebeiyuan, Yanghu, and Xujiahu sewage pumping stations of Yuelu District. The calculated concentrations of methcathinone were 4.80, 15.33, and 8.59 nM in sewage samples, which were in good agreement with data tested by LC-MS/MS. For another function, MFMIPs exhibited purification toward methcathinone and the adsorption capacity was about 0.27 mg/g in a real sewage sample. Moreover, the sensor could be recycled and reused at least five times with the aid of an external magnetic field. Collectively, with good analytical performance and excellent recognition and selectivity to methcathinone, the proposed sensing system based on the magnetic core and molecularly imprinted polymers would open a door to establish highly sensitive and effective sensing systems for sewage analysis and purification.

In situ electrochemical synthesis of graphene-poly(arginine) composite for p-nitrophenol monitoring

Para-Nitrophenol (p-nitrophenol) is a common industrial pollutant occurring widely in water bodies, yet actual monitoring methods are limited. Herein we proposed a fully electrochemically in situ synthesized graphene-polyarginine composite functionalized screen printed electrode, as a novel p-nitrophenol sensing platform. The electrode was characterized by morphologic, spectrometric and electrochemical techniques. p-nitrophenol in both pure aqueous solution and real water samples was tested. Results show a detection limit as low as the nanomolar level, and display a linear response and high selectivity in the range of 0.5-1250 μM. Molecular simulation reveals a detailed synergy between graphene and poly-arginine. The preferable orientation of nitrophenol molecules on the graphene interface in the presence of poly-arginine induces H- and ionic binding. This sensor is an ideal prototype for p-nitrophenol quantification in real waters.

NaYF4:Yb3+(58%),Tm3+@NaYF4@Au nanocomposite for 4-nitrophenol ultrasensitive quantitative detection and highly efficient catalytic reduction

NaYF4:Yb3+(58%),Tm3+@NaYF4@Au composite nanomaterials were designed and synthesized through condition optimization for the quantitative detection and catalytic reduction of 4-NP.

Upconversion fluorescent nanoprobe based on 4-NP reversible structure for a wide range of pH determination

Accurate detection of pH value has received more and more attention in various fields. However, most reported probes show pH values in the acidic or alkaline range and work within...

CeO2 quantum dots for highly selective and ultrasensitive fluorescence detection of 4-nitrophenol via the fluorescence resonance energy transfer mechanism

A rapid and simple fluorescence probe based on CeO₂ quantum dots (QDs) was developed for highly selective and ultrasensitive direct determination of 4-nitrophenol (4-NP). CeO₂ QDs were prepared using the sol-gelmethod with the precursor of Ce(NO₃)₃·6H₂O as a cerium source. The products were characterized through high-resolution electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. The fluorescent probe based on CeO₂ QDs exhibited a broad linear response to the concentration of 4-NP in the range of 0.005-75.00 μM and provided a low detection limit of 1.50 nM. The fluorescence of CeO₂ QDs was quenched by 4-NP through the fluorescence resonance energy transfer mechanism owing to the well overlaps between the fluorescence emission spectrum of CeO₂ QDs with the ultraviolet absorption spectrum of 4-NP. This result was confirmed by the time-resolved fluorescence spectra and the evaluation of the interaction distance between CeO₂ QDs and 4-NP. The prepared CeO₂ QDs are successfully applied to the determination of 4-NP in real water samples, where the spiked recoveries range from 98.2% to 102.4%.

Substantial emissions of nitrated aromatic compounds in the particle and gas phases in the waste gases from eight industries

Nitrated aromatic compounds, the ubiquitous nitrogen-containing organic pollutants, impact the environment and organisms adversely. As industrial raw materials and intermediates, nitrated aromatic compounds and their aromatic precursors are widely employed in the industrial production activities. Nevertheless, their emission from industrial waste gases has so far not been studied extensively. In this study, the concentrations of 12 nitrated aromatic compounds in the particle and gas phases downwind of 16 factories encompassing eight industries (i.e., pharmaceutical, weaving and dyeing, herbicide, explosive, painting, phenolic resin, paper pulp and polystyrene foam industries), were determined by ultra-high-performance liquid chromatography-mass spectrometry. Their concentrations in the particle and gas phases from different factories ranged from 114.7 ± 63.5 to 296.6 ± 62.5 ng m^-3 and 148.7 ± 7.4 to 309.8 ± 26.2 ng m^-3, respectively, thus, exhibiting significantly high concentrations as compared to the background sites. Among the 12 detected species, 4-nitrophenol, 5-nitrosalicylic acid, 3-nitrosalicylic acid and 4-methyl-2,6-dinitrophenol were observed to be the predominant species, with total fractions up to 47.9-72.3% and 63.1-70.3% in the particle and gas phases, respectively. Their emission profiles with respect to the industrial activities exhibited large discrepancies as compared to the combustion sources, thus, indicating different formation mechanisms. The emission ratios of particulate nitrated aromatic compounds owing to the industrial activities were estimated between 0.5 ± 0.2 and 4.3 ± 1.5 ng μg^-1, which were higher than or comparable to those from various combustion sources. The findings from this study confirm the industrial emission to be an important source of nitrated aromatic compounds in the atmosphere. The substantial emissions of nitrated aromatic compounds from various industries reported in this study provide the fundamental basis for further emission estimation and pollution control.

Microwave-assisted assembly of Ag2O-ZnO composite nanocones for electrochemical detection of 4-Nitrophenol and assessment of their photocatalytic activity towards degradation of 4-Nitrophenol and Methylene blue dye

4-Nitrophenol (4-NP) is an extensively utilized industrial chemical and one of major toxic water pollutant. Therefore, there is an urgent need to monitor the levels of 4-NP from environmental samples as well as its eradication are extremely important. Keeping this as a motivation, this research for the first-time reports microwave-assisted cost-effective synthesis of silver oxide (Ag₂O)-zinc oxide (ZnO) composite nanocones (CNCs, 80-100 nm) for simultaneous electrochemical detection and photodegradation of 4-NP from aqueous solutions. The Ag₂O-ZnO CNCs modified gold electrode was fabricated for electrochemical detection of 4-NP. Such fabricated sensor exhibited a sensitivity of 1.6 µA µM^-1cm^-2, wide linear detection range of 0.4-26 µM & 28-326 µM, and a low limit of detection of 23 nM. The sensor also exhibited good selectivity in real water samples. Also, an outstanding photocatalytic performance of Ag₂O-ZnO CNCs was evaluated towards UV-assisted degradation of 4-NP and organic water pollutant dye, methylene blue. The Ag₂O-ZnO CNCs exhibited excellent electro- and photocatalytic activities due to the formation of p-n nano-heterojunction comprising of p-type Ag₂O and n-type ZnO semiconductor nanoparticles within the composite. Therefore, herein reported smart CNCs can be projected as applied nano-system for cost-effective and rapid simultaneous detection and removal of 4-NP from aqueous solutions. Such nano-system can be useful for industrial application where detection and removal of 4-NP is a key issue to resolve.

Ratiometric detection of p-nitrophenol and its derivatives using a dual-emissive neuron cell-like carbonized probe based on a ππ stacking quenching mechanism

p-Nitrophenol and its derivatives can cause serious harm to the health of mankind and the earth's ecosystem. Therefore, it is necessary to develop a novel and rapid detection technology for p-nitrophenol and its derivative. Herein, excellent water-soluble, large-size and dual-emissive neuron cell-analogous carbon-based probes (NCNPs) have been prepared via a solvothermal approach, using o-phenylenediamine as the only precursor, which exhibit two distinctive fluorescence (FL) peaks at 420 and 555 nm under 345 nm excitation. The NCNPs show a neuron cell-like branched structure, are cross-connected, and are in the range of 10-20 nm in skeleton diameter. Interestingly, their blue-green dual-colour fluorescence is quenched by p-nitrophenol or its derivative due to the specific mechanism of the ππ stacking interactions or internal filtration effect. Accordingly, a simple, rapid, direct and free-label ratiometric FL detection of p-nitrophenol is proposed. An excellent linear relationship shows linear regions over the range of 0.1-50 μM between the ratio of the FL intensity (FL555 nm/FL420 nm) and the concentrations of p-nitrophenol. The detection limit is as low as 43 nM (3σ). Importantly, the NCNP-based probe also shows acceptable repeatability and reproducibility for the detection of p-nitrophenol and its derivatives, and the recovery results for p-nitrophenol in real wastewater samples are favourable.

A turn-on fluorescent probe based on N-(rhodamine-B)-thiolactam-2-n-butane with ionic liquids for selective and sensitive detection of mustard gas stimulant

Sulfur mustard (SM) is recognized as one of the most lethal warfare agents. It has the potential to seriously affect public health and safety. To employ appropriate medical countermeasures and treat victims as quickly as possible, the development of a rapid and simple SM detection technique is crucial. The aim of the present study was to explore novel detection systems exhibiting excellent selectivity and high sensitivity. An SM probe, namely N-(rhodamine-B)-thiolactam-2-n-butane (SRB-NB), which was based on a thiolactam structure, was effectively designed and synthesized. The rhodamine and thiourea moieties played the roles of the chromogenic and reacting groups, respectively. Subsequently, using ionic liquids (ILs) as the solvents, a turn-on fluorescence detection system was constructed. Notably, it was found that imidazole-based ILs displayed good solubility for an SM simulant, specifically 2-chloroethyl ethyl sulfide (2-CEES). Moreover, 1-butyl-3-methylimidazolium dicyandiamide ([BMIm]DCA) IL held the maximum amount of 2-CEES (132.5 g/100 g). The SRB-NB probe exhibited better ultraviolet (UV) absorption and fluorescence properties in ILs than in other organic solvents. SRB-NB/IL was able to detect 2-CEES in liquid form with remarkable selectivity and sensitivity. The limit of detection (LOD) was established at 3.0 × 10-6 M. Importantly, SRB-NB/ILs also showed good optical response to gaseous 2-CEES and SM.