Raman reporter-assisted Au nanorod arrays SERS nanoprobe for ultrasensitive detection of mercuric ion (Hg2+) with superior anti-interference performances

Phenylboronic Acid-Functionalized Ratiometric Surface-Enhanced Raman Scattering Nanoprobe for Selective Tracking of Hg2+ and CH3Hg+ in Aqueous Media and Living Cells

The development of appropriate molecular tools to monitor different mercury speciation, especially CH3Hg+, in living organisms is attractive because its persistent accumulation and toxicity are very harmful to human health. Herein, we develop a novel activity-based ratiometric SERS nanoprobe to selectively monitor Hg2+ and CH3Hg+ in aqueous media and in vivo. In this nanoprobe, a new bifunctional Raman probe bis-s-s'-[(s)-(4-(ethylcarbamoyl)phenyl)boronic acid] (b-(s)-EPBA) was synthesized and immobilized on the surface of gold nanoparticles via a Au-S bond, in which the phenylboronic acid group was employed as the recognition unit for Hg2+ and CH3Hg+ based on the Hg-promoted transmetalation reaction. In the presence of Hg2+ and CH3Hg+, a new surface-enhanced Raman scattering (SERS) peak aroused from of C-Hg appeared at 1080 cm-1, and the SERS intensity at 1002 cm-1 belonged to the B-O symmetric stretching decreased simultaneously. The quantitative tracking of Hg2+ and CH3Hg+ was realized based on the SERS intensity ratio (I1080/I1303) with rapid response (∼4 min) and high sensitivity, with detection limits of 10.05 and 25.13 nM, respectively. Moreover, the SERS sensor was used for the quantitative detection of Hg2+ and CH3Hg+ in four actual water samples with a high accuracy and excellent recovery. More importantly, cell imaging experiments showed that AuNPs@b-(s)-EPBA could quantitatively detect intracellular CH3Hg+ and had a good concentration dependence in ratiometric SERS imaging. Meanwhile, we demonstrated that AuNPs@b-(s)-EPBA could detect and image CH3Hg+ in zebrafish. We anticipate that AuNPs@b-(s)-EPBA could potentially be used to study the physiological functions related to CH3Hg+ in the future.

Nanosculptured tungsten oxide: High-efficiency SERS sensor for explosives tracing

The accurate and rapid identification of explosives and their toxic by-products is an important aspect of safety protocols, forensic investigations and pollution studies. Herein, surface-enhanced Raman scattering (SERS) is used to detect different explosive molecules using an improved substrate design by controllable oxidation of the tungsten surface and deposition of Au layers. The resulting furrow-like morphology formed at the intersection of the tungsten Wulff facets increases nanoroughness and improves the SERS response by over 300 % compared to the untreated surface. The substrate showed excellent reproducibility with a relative standard deviation of less than 15 % and a signal recovery of over 95 % after ultrafast Ar/O2 plasma cleanings. The detection limit for the "dried on a surface" measurement case was better than 10-8 M using the moving scanning regime and an acquisition time of 10 s, while for the "water droplets on a surface" scenario the LoD is 10-7, which is up to 2 orders of magnitude better than the UV-Vis spectroscopy method. The substrates were successfully used to classify the molecular fingerprints of HMX, Tetryl, TNB and TNT, demonstrating the efficiency of a sensor for label-free SERS screening in the practice of monitoring traces of explosives in the water medium.

Advancements in mercury detection using surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs): a review

Mercury (Hg) contamination remains a major environmental concern primarily due to its presence at trace levels, making monitoring the concentration of Hg challenging. Sensitivity and selectivity are significant challenges in the development of mercury sensors. Surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs) are two distinct analytical methods developed and employed for mercury detection. In this review, we provide an overview of the key aspects of SERS and IIP methodologies, focusing on the recent advances in sensitivity and selectivity for mercury detection. By examining the critical parameters and challenges commonly encountered in this area of research, as reported in the literature, we present a set of recommendations. These recommendations cover solid and colloidal SERS substrates, appropriate Raman reporter/probe molecules, and customization of IIPs for mercury sensing and removal. Furthermore, we provide a perspective on the potential integration of SERS with IIPs to achieve enhanced sensitivity and selectivity in mercury detection. Our aim is to foster the establishment of a SERS-IIP hybrid method as a robust analytical tool for mercury detection across diverse fields.

A rhodamine NIR probe for naked eye detection of mercury ions and its application

Fluorescence imaging technology has developed rapidly with its advantages, and near-infrared probes are worthy of attention because of their less background interference, low light damage, and infinite potential. Rhodamine and its derivatives have the unique structure of lactam helices, which is an ideal platform for the construction of on-off fluorescent sensors. In this paper, a novel near-infrared fluorescent probe (RBLS) based on rhodamine derivatives was synthesized for the transient detection of mercury ions. The closed-on structure can realize reversible sensor recovery by adding S2-. The superior imaging capability in living cells and in vivo in zebrafish holds promise for biological applications. In addition, the naked eye test strips prepared with RBLS probes can be used to detect and screen Hg2+ in the environment and show good gradient change performance.

Solid chip-based detection of trace morphine in solutions via portable surface-enhanced Raman spectroscopy

The accurate, sensitive and portable detection of morphine is important to handle judicial cases, but remains to be a great challenge. In this work, a flexible route is presented for the accurate identification and efficient detection of trace morphine in solutions based on surface-enhanced Raman spectroscopy (SERS) and a solid substrate/chip. A gold-coated jagged silicon nanoarray (Au-JSiNA) is designed and prepared via Si-based polystyrene colloidal template-reactive ion etching and sputtering deposition of Au. Such Au-JSiNA has three-dimensional nanostructure with good structural uniformity, high SERS activity and hydrophobic surface. Adopting this Au-JSiNA as SERS chip, trace morphine in solutions could be detected and identified in both dropping and soaking ways, and the limit of detection is below 10-4 mg/mL. Importantly, such chip is especially suitable for the detection of trace morphine in aqueous solutions and even domestic sewage. The good SERS performance is attributed to the high-density nanotips and nanogaps on this chip as well as its hydrophobic surface. Additionally, the appropriate surface modification of this Au-JSiNA chip with 3-mercapto-1-propanol or 3-mercaptopropionic acid/1-(3-dimethylaminopropyl)-3-ethylcarbodiimide can further increase its SERS performances to morphine. This work provides a facile route and practical solid chip for SERS detection of trace morphine in solutions, which is significant to develop the portable and reliable instruments for on-site analysis of drugs in solutions.

Tuning Chemical Interface Damping: Competition between Surface Damping Pathways in Amalgamated Gold Nanorods Coated with Mesoporous Silica Shells

The mechanism of mercury (Hg) amalgamation in gold nanorods coated with a mesoporous silica shell (AuNRs@mSiO2) and the effect of chemical treatments on the localized surface plasmon resonance (LSPR) spectral changes in single amalgamated AuNRs@mSiO2 remains unclear. In this study, we investigated Hg amalgamation and inward Hg diffusion in single AuNRs@mSiO2 without structural deformation via dark-field scattering spectroscopy and X-ray photoelectron spectroscopy. Then, we investigated the chemisorption of thiol molecules on single amalgamated AuNRs@Hg-mSiO2. Unlike previous studies on single AuNRs, the thiolation on single AuNRs@Hg-mSiO2 resulted in a redshift and line width narrowing of the LSPR peak within 1 h. To determine the chemical effect, we investigated the competition between two surface damping pathways: metal interface damping (MID) and chemical interface damping (CID). When we exposed amalgamated AuNRs@Hg-mSiO2 to 1-alkanethiols with three different carbon chain lengths for 1 h, we observed an increase in the line width broadening with longer chain lengths owing to enhanced CID, demonstrating the tunability of CID and LSPR properties upon chemical treatments. We also investigated the competition between the two surface damping pathways as a function of the time-dependent Au-Hg surface properties in AuNRs@Hg-mSiO2. The 24-h Hg treatment resulted in increased line width broadening compared to the 1-h treatment for the same thiols, which was attributed to the predominance of CID. This was in contrast to the predominance of MID under the 1-h treatment, which formed a core-shell structure. Therefore, this study provides new insights into the Hg amalgamation process, the effect of chemical treatments, competition between surface decay pathways, and LSPR control in AuNRs@mSiO2.

Perspectives on Novel Technologies of Processing and Monitoring the Safety and Quality of Prepared Food Products

With the changes of lifestyles and rapid growth of prepared food industry, prepared fried rice that meets the consumption patterns of contemporary young people has become popular in China. Although prepared fried rice is convenient and nutritious, it has the following concerns in the supply chain: (1) susceptible to contamination by microorganisms; (2) rich in starch and prone to stall; and (3) vegetables in the ingredients have the issues of water loss and discoloration, and meat substances are vulnerable to oxidation and deterioration. As different ingredients are used in prepared fried rice, their food processing and quality monitoring techniques are also different. This paper reviews the key factors that cause changes in the quality of prepared fried rice, and the advantages and limitations of technologies in the processing and monitoring processes. The processing technologies for prepared fried rice include irradiation, high-voltage electric field, microwave, radio frequency, and ohmic heating, while the quality monitoring technologies include Raman spectral imaging, near-infrared spectral imaging, and low-field nuclear magnetic resonance technology. These technologies will serve as the foundation for enhancing the quality and safety of prepared fried rice and are essential to the further development of prepared fried rice in the emerging market.

Solid-State Au Nanocone Arrays Substrate for Reliable SERS Profiling of Serum for Disease Diagnosis

Surface-enhanced Raman scattering (SERS) is a widely used rapid and noninvasive method for detecting biological substances in serum samples and is commonly employed in disease screening and diagnosis. Solid-state nanoarray SERS substrates used in serum detection may cause spectral instability due to imperfections in the detection method. For the purpose of identifying optimal detection conditions, various dilution levels of the serum were tested in this study. The study found that a complete and stable serum SERS spectrum can be obtained when the serum is diluted by a factor of 50. The study reports the successful preparation of an Au nanocone array (Au NCA) plasmonic substrate with a uniform, controllable microstructure and high activity, achieved through a combination of PS colloidal sphere template-assisted reactive ion etching (RIE) process and magnetron sputtering deposition technology. Based on this substrate, a standard detection scheme was developed to obtain highly stable and repeatable serum SERS spectra. The study verified the reliability of the optimized serum detection scheme by comparing the SERS spectra of serum samples from healthy individuals and gastric cancer patients, and confirmed the potential benefits of the scheme for disease screening and diagnosis.

A fluorescent probe based on aptamer gold nanoclusters for rapid detection of mercury ions

The mercuric ion (Hg2+) is a hazardous pollutant that is widely distributed in living organisms, foods, and environments with highly toxic and bio-accumulative properties. In the present study, a fluorescent probe based on aptamer gold nanoclusters (apt-AuNCs) was prepared for the ultrasensitive detection of Hg2+ in food. The principle underlying the prepared probe was the quenching of the fluorescence of apt-AuNCs in the presence of Hg2+ due to the strong metallophilic interactions between the 5d10 centers of Hg2+ and Au+. Under optimal conditions, the proposed fluorescent probe exhibited a linear relationship with Hg2+ concentration within the range of 2-200 nM (R2 = 0.9960). In addition, the limit of detection (LOD) was 0.0158 nM, which is below the Chinese standard value of 25 nM for Hg2+ in food. Furthermore, the apt-AuNCs were applied to detect Hg2+ in spinach and crawfish samples, with recovery percentages of 91.99%∼108.06%, meaning that apt-AuNCs could be used as a promising probe to detect Hg2+ in complex food samples.

Design, Fabrication, and Applications of SERS Substrates for Food Safety Detection: Review

Sustainable and safe food is an important issue worldwide, and it depends on cost-effective analysis tools with good sensitivity and reality. However, traditional standard chemical methods of food safety detection, such as high-performance liquid chromatography (HPLC), gas chromatography (GC), and tandem mass spectrometry (MS), have the disadvantages of high cost and long testing time. Those disadvantages have prevented people from obtaining sufficient risk information to confirm the safety of their products. In addition, food safety testing, such as the bioassay method, often results in false positives or false negatives due to little rigor preprocessing of samples. So far, food safety analysis currently relies on the enzyme-linked immunosorbent assay (ELISA), polymerase chain reaction (PCR), HPLC, GC, UV-visible spectrophotometry, and MS, all of which require significant time to train qualified food safety testing laboratory operators. These factors have hindered the development of rapid food safety monitoring systems, especially in remote areas or areas with a relative lack of testing resources. Surface-enhanced Raman spectroscopy (SERS) has emerged as one of the tools of choice for food safety testing that can overcome these dilemmas over the past decades. SERS offers advantages over chromatographic mass spectrometry analysis due to its portability, non-destructive nature, and lower cost implications. However, as it currently stands, Raman spectroscopy is a supplemental tool in chemical analysis, reinforcing and enhancing the completeness and coverage of the food safety analysis system. SERS combines portability with non-destructive and cheaper detection costs to gain an advantage over chromatographic mass spectrometry analysis. SERS has encountered many challenges in moving toward regulatory applications in food safety, such as quantitative accuracy, poor reproducibility, and instability of large molecule detection. As a result, the reality of SERS, as a screening tool for regulatory announcements worldwide, is still uncommon. In this review article, we have compiled the current designs and fabrications of SERS substrates for food safety detection to unify all the requirements and the opportunities to overcome these challenges. This review is expected to improve the interest in the sensing field of SERS and facilitate the SERS applications in food safety detection in the future.

Well-Ordered Au Nanoarray for Sensitive and Reproducible Detection of Hepatocellular Carcinoma-Associated miRNA via CHA-Assisted SERS/Fluorescence Dual-Mode Sensing

Ultra-sensitive detection of cancer-related biomarkers in serum is of great significance for early diagnosis, treatment, prognosis, and staging of cancer. In this work, we proposed a surface-enhanced Raman scattering and fluorescence (SERS/FL) dual-mode biosensor for hepatocellular carcinoma (HCC)-related miRNA (miR-224) detection using the composition of well-arranged Au nanoarrays (Au NAs) substrate coupled with the target-catalyzed hairpin assembly (CHA) strategy. The hot spots densely and uniformly distributed on the Au array offers considerably enhanced and reproducible SERS signals, along with their wide and open surface to facilitate miR-224 adsorption. By this sensing strategy, the target miR-224 can be detected in a wide linear range (1 fM to 1 nM) with a limit of detection of 0.34 fM in the SERS mode and 0.39 fM in the FL mode. Meanwhile, this biosensor with exceptional specificity and anti-interference ability can discriminate target miR-224 from other interference miRNAs. Practical analysis of human blood samples also demonstrated considerable reliability and repeatability of our developed strategy. Furthermore, this biosensor can distinguish HCC cancer subjects from normal ones and monitor HCC patients before and after hepatectomy as well as guide the distinct Barcelona clinic liver cancer (BCLC) stages. Overall, benefiting from a well-arranged Au nanoarray, CHA amplification strategy, and SERS/metal enhanced fluorescence effect, this established biosensor opens new avenues for the early prediction, warning, monitoring, and staging of HCC.

Recent advances of Au@Ag core-shell SERS-based biosensors

The methodological advancements in surface-enhanced Raman scattering (SERS) technique with nanoscale materials based on noble metals, Au, Ag, and their bimetallic alloy Au-Ag, has enabled the highly efficient sensing of chemical and biological molecules at very low concentration values. By employing the innovative various type of Au, Ag nanoparticles and especially, high efficiency Au@Ag alloy nanomaterials as substrate in SERS based biosensors have revolutionized the detection of biological components including; proteins, antigens antibodies complex, circulating tumor cells, DNA, and RNA (miRNA), etc. This review is about SERS-based Au/Ag bimetallic biosensors and their Raman enhanced activity by focusing on different factors related to them. The emphasis of this research is to describe the recent developments in this field and conceptual advancements behind them. Furthermore, in this article we apex the understanding of impact by variation in basic features like effects of size, shape varying lengths, thickness of core-shell and their influence of large-scale magnitude and morphology. Moreover, the detailed information about recent biological applications based on these core-shell noble metals, importantly detection of receptor binding domain (RBD) protein of COVID-19 is provided.

Equilibria of semi-volatile isothiazolinones between air and glass surfaces measured by gas chromatography and Raman spectroscopy

Trace amounts of semi-volatile organic compounds (SVOCs) of the two isothiazolinones of 2-methylisothiazol-3(2H)-one (MIT) and 2-octyl-4-isothiazolin-3-one (OIT) were detected both in the air and on glass surfaces. Equilibria of SVOCs between air and glass were examined by solid phase microextraction-gas chromatography/mass spectrometry (SPME-GC/MS). Surface to air distribution ratios of K_sa for MIT and OIT were determined to be 5.10 m and 281.74 m, respectively, suggesting more abundant MIT in the gas phase by a factor of ∼55. In addition, a facile method of silver nanocube (AgNC)-assisted surface-enhanced Raman scattering (SERS) has been developed for the rapid and sensitive detection of MIT and OIT on glass surfaces. According to MIT and OIT concentration-correlated SERS intensities of Raman peaks at ∼1585 cm^-1 and ∼1125 cm^-1, respectively. Their calibration curves have been obtained in the concentration ranges between 10^-3 to 10^-10 M and 10^-3 to 10^-11 M with their linearity of 0.9986 and 0.9989 for MIT and OIT, respectively. The limits of detection (LODs) of the two isothiazolinones were estimated at 10^-10 M, and 10^-11 M for MIT and OIT, respectively. Our results indicate that AgNC-assisted SERS spectra are a rapid and high-ultrasensitive method for the quantification of MIT and OIT in practical applications. The development of analytical methods and determination of the Ksa value obtained in this study can be applied to the prediction of the exposure to MIT and OIT from various chemical products and dynamic behaviors to assess human health risks in indoor environments.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

Rapid and sensitive SERS detection of opioids in solutions based on the solid chip Au-coated Si nano-cone array

Rapid and flexible detection or accurate recognition of trace drugs is of great importance in cracking down on drug crimes, but it remains to be expected. Here, a solid chip is presented for the efficient detection and recognition of trace opioids (typically morphine) in aqueous solutions based on surface-enhanced Raman spectroscopy (SERS). Firstly, a Au-coated Si nano-cone array (Au-SNCA) is designed and fabricated via Si-based organic colloidal template etching and Au deposition. This Au-SNCA shows three-dimensional nanostructure with high densities of nanotips and deep nanogaps as well as high structural consistency, which exhibits strong SERS activity to morphine and outstanding stability. Then, such Au-SNCA is used as solid SERS chip to detect morphine in aqueous solutions. It has been demonstrated that using such solid chip, trace morphine in solutions could be recognized and detected within 1 min, and the detection limit is 10^-5 mg/mL (∼10 ppb), showing rapid and sensitive detection, which is much better than the previous reports. Meanwhile, the Au-SNCA chip also can be utilized to detect trace morphine in tap water and reservoir water, the recoveries range from 90.4% to 102.4%. Such excellent SERS performance of this Au-SNCA chip is attributed to its special structure which enhances not only local electromagnetic field but also molecular adsorption. The experimental results about the effects of immersion time and concentration show that the adsorption behavior of morphine molecules on such Au-SNCA chip can be explained by the pseudo-second-order kinetic model and Freundlich adsorption mode. Moreover, the Au-SNCA chip is also suitable for the identification of morphine homologues and the broad-spectrum detection of various common drugs. This study presents a practical solid chip and a simple approach for the efficient SERS detection and recognition of trace drugs in solutions. This is of significance to on-site detect drugs in forensic science.

A Critical Review on the Development of Optical Sensors for the Determination of Heavy Metals in Water Samples. The Case of Mercury(II) Ion

Recent publications are reviewed concerning the development of sensors for the determination of mercury in drinking water, based on spectroscopic methodologies. A critical analysis is made of the specific details and figures of merit of the developed protocols. Special emphasis is directed to the validation and applicability to real samples in the usual concentration range of mercury, considering the maximum allowed limits in drinking water established by international regulations. It was found that while most publications describe in detail the synthesis, structure, and physicochemical properties of the sensing phases, they do not follow the state of the art in the analytical developments. Recommendations are provided regarding the proper method development and validation, including the setting of the calibration concentration range, the correct estimation of the limits of detection and quantitation, the concentration levels to be set for producing spiked water samples, the number of real samples for adequate validation, the comparison of the developed method with a reference technique, and other analytical features which should be followed.

Hydrophobic plasmonic silver membrane as SERS-active catcher for rapid and ultrasensitive Cu(II) detection

The rapid and selective identification of heavy metal ions is crucial for environmental water safety. In this study, a novel surface-enhanced Raman scattering (SERS)-active catcher was designed for Cu(II) detection using a hydrophobic hydroxyoxime-mediated plasmonic silver membrane (HOX@Ag-PVDF). Uniformly dispersed Ag nanoparticles (ca. 80 nm) and hydroxyoxime molecules were synchronously decorated on the skeleton of the polyvinylidene fluoride membrane via an in situ interfacial assembly strategy. HOX@Ag-PVDF shows excellent SERS activity (EF = 2.5 × 10⁷), high reproducibility (~8% RSD), and long-term stability (50 days) for detecting 4-nitrothiophenol (4-NTP). Moreover, HOX@Ag-PVDF can serve as a new platform for rapid and dry-free SERS detection of Cu(II) owing to its strong affinity and surface hydrophobicity. Cu(II) ions can be rapidly captured in 5 s and selectively recognized by SERS signals without interference from other metal ions. HOX@Ag-PVDF exhibits linear SERS response signals at low concentrations ranging from 10^-6 to 10^-10 mol/L Cu(II) (R² = 0.9893) with a low detection limit (LOD) of 52.0 pmol/L. This hydrophobic plasmonic membrane, with its simple sampling and rapid SERS response characteristics, provides ultrasensitive recognition and heavy metal detection for practical applications.

A Dual-Mode NADH Biosensor Based on Gold Nanostars Decorated CoFe2 Metal-Organic Frameworks to Reveal Dynamics of Cell Metabolism

Nicotinamide adenine dinucleotide (NADH) is central to metabolism and implicated in various diseases. Herein, nanohybrids of gold nanostars and metal-organic frameworks are devised and demonstrated as a dual-mode NADH sensor, for which colorimetric detection is enabled by its peroxidase-like nanozyme property and Raman detection is realized by its surface-enhanced Raman scattering property with the detection limit as low as 28 pM. More importantly, this probe enables real-time SERS monitoring in living cells, providing a unique tool to investigate dynamic cellular processes involving NADH. Our experiments reveal that metabolism dynamics is accelerated by glucose and is much higher in cancerous cells. The SERS results can also be verified by the colorimetric detection. This sensor provides a new potential to detect biomarkers and their dynamics in situ.

Ag-decorated polymer chip for the determination of the respective concentrations of TTD and Hg2+ by surface-enhanced raman scattering

A “hotspot”-rich Ag-nanoparticle-decorated three-dimensional polymer substrate was fabricated, exhibiting an excellent surface-enhanced Raman scattering (SERS) activity.

Tuning plasmonic properties by promoting the inward Hg diffusion via oxygen plasma treatment in gold nanorods coated with a mesoporous silica shell

Oxygen plasma treatment was presented as an effective approach to control the LSPR properties by promoting the inward Hg diffusion in amalgamated AuNRs@mSiO2.

[OPy][BF4] Selective Extraction for Trace Hg2+ Detection by Electrochemistry: Enrichment, Release and Sensing

Trace mercury ion (Hg2+) detection is important for environmental monitoring and water safety. In this work, we study the electrochemical strategy to detect trace Hg2+ based on the preconcentration of temperature-controlled N-octylpyridinium tetrafluoroborate ([OPy][BF4]) dispersive liquid-liquid microextraction. The [OPy][BF4] selectively extracted Hg2+ from aqueous solution by the adsorption of unsaturated N in [OPy][BF4], which increased the concentration of Hg2+ and decreased that of other interference ions. It was noted that the adsorption of [OPy][BF4] to Hg2+ was weakened by aqueous solution. Hence, after extraction, precipitated [OPy][BF4] was diluted by a buffer solution comprising a mixture of water and acetonitrile to release Hg2+ and the single was detected by electrochemistry. Water is proposed to release Hg2+ adsorbed by [OPy][BF4], and the acetonitrile serves as a co-solvent in buffer solution. Sensitivity and anti-inference ability of sensors were improved using the proposed method and Hg2+ releasing procedure. The detection limit (S/N = 3) of the sensor is 0.0315 μg/L with a linear range from 0.1 to 1 μg/L. And the sensor exhibits good recovery with an range from 106 % to 118%, which has great potential for trace Hg2+ determination.

Ultrasensitive surface-enhanced Raman spectroscopy detection of gaseous sulfur-mustard simulant based on thin oxide-coated gold nanocone arrays

Surface Enhanced Raman Spectroscopy (SERS) could be a powerful technique for detecting trace gaseous sulfur-mustard, but it is still challenging due to the difficulty in efficiently capturing sulfur-mustard molecules by normal SERS substrates. Here, a chemically trapping strategy is presented for such detection via coating an ultrathin metal-oxide sensing layer on a SERS substrate. In the strategy, a SERS substrate Au-wrapped Si nanocone array is designed and fabricated by Si wafer-based organic template-etching and appropriate Au deposition, and coated with an ultrathin CuO for chemically capturing sulfur-mustard molecules. The validity of such strategy has been demonstrated via taking the gaseous 2-chloroethyl ethyl sulfide (a simulant of sulfur-mustard, or 2-CEES for short) as the target molecules. The response of the CuO-coated SERS substrate to the gaseous 2-CEES is detectable within 10 min, and the lowest detectable concentration is 10 ppb or less. Further experiments have shown that there exists an optimal CuO coating thickness which is about 6 nm. The CuO coating-based capture of 2-CEES molecules is attributed to the surface hydroxyl-induced specific adsorption, which is subject to the pseudo-second-order kinetics and Freundlich-typed model. This study presents the practical SERS chips and new route for the trace detection of gaseous sulfur-mustard.

A capillary-based SERS sensor for ultrasensitive and selective detection of Hg2+ by amalgamation with Au@4-MBA@Ag core-shell nanoparticles

A capillary-based SERS sensor was fabricated for ultrasensitive and selective detection of Hg2+ in water. Au@Ag core-shell NPs embedded with 4-mercaptobenzoic acid (4-MBA) (Au@4-MBA@Ag) were prepared by a seed growth method and fixed on the inner wall of the glass capillary to obtain the sensor. Owing to the amalgamation between Ag and Hg, the capillary-based SERS sensor can specifically recognize the reduced Hg2+ without any recognition element, and the resulted Ag/Hg amalgam can weaken the SERS activity of Ag shell; thus, the SERS intensity of the embedded 4-MBA at 1075 cm-1 gradually decreased with the increase of Hg2+ concentration. Under the optimum condition, the fabricated sensor can sensitively determine Hg2+ in water with a limit of detection (LOD) as low as 0.03 nM. The capillary-based SERS sensor offers the advantages of simple preparation, superior stability, and high selectivity, which is promising for rapid and on-site detection of Hg2+ in water combined with a portable Raman device.

Highly Sensitive Detection for Mercury Ions Using Graphene Oxide (GO) Sensors

The mercury ion (Hg²⁺) is one of the heavy metal ions, and its presence in trace amounts can cause physiological damage to an organism. Traditional methods of Hg²⁺ detection have been useful but have also had numerous limitations and challenges, and as a result, it is important to design new and sophisticated methods that can aid in the detection of Hg²⁺. In this paper, two fluorescent dyes, carboxyfluorescein (FAM) and SYBR Green I, were used to label and intercalate DNA probes immobilized on the surface of graphene oxide (GO) for sensors to detect Hg²⁺. FAM and SYBR Green I dye share close excitation and emission wavelength spectra, which can promote and amplify the detection of signals, and also increase the limit of detection (LOD). The results showed that the limit of detection in this method was 0.53 nM. Moreover, when the sensors with double amino groups on the surface of GO were carried out to detect Hg²⁺, a limit of detection was improved to 0.43 nM. The sensors were then applied in the real sample. The results show that this method has a promising potential in Hg²⁺ detection.

How Stabilizers and Reducing Agents Affect the Formation of Nanogold Amalgams

The influence of mercury on the morphology and formation mechanism of gold amalgams in the presence of different reducing agents (ascorbic acid and sodium borohydride) was systematically studied. In the presence of cetyltrimethylammonium bromide (CTAB), chemical reducing agents not only reduced mercury ions in the solution but also replaced the CTAB molecules on the surface of the gold nanorod. The stability of the reducing agents in the colloidal system and the combining capacity of the reducing agent to the gold nanoparticles can affect the alloying process of mercury and gold, thereby forming a rod-shaped or spherical gold amalgam. Once CTAB was removed, a similar transformation process occurs between the gold nanorods and mercury. In addition, without the presence of a stabilizer, mercury that cannot be dispersed undergoes Ostwald ripening growth, which causes the gold amalgam nanoalloys to form a tip-to-tip structure as a result of mercury enrichment because of the weak shielding effects occurring at the tips of the gold nanorods. After the CTAB molecules were substituted with ascorbic acid and alkylthiol molecules, the question of whether the shielding effect weakened or disappeared was also investigated. By investigation, this research found that, in comparison to the blocking effect of CTAB molecules, the binding ability of the reducing agent to gold plays a dominant role in the nanoamalgam formation process.

A sensitive turn-off-on fluorometric sensor based on S,N co-doped carbon dots for environmental analysis of Hg(II) ion

A simple and sensitive fluorescence turn-off-on sensor was established by means of S,N co-doped carbon dots (S,N-CDs) and Ag nanoparticles (AgNPs) for the determination of Hg²⁺ . For this purpose, blue emissive S,N-CDs were hydrothermally synthesized and characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive X-ray spectroscopy. We observed that the fluorescence intensity of the as-prepared S,N-CDs was impressively quenched by AgNPs. The quenching mechanism was studied and attributed to nanosurface energy transfer and the inner filter effect between S,N-CDs and AgNPs. Furthermore, by adding Hg²⁺ , the fluorescence intensity of S,N-CDs/AgNPs was restored as a result of aggregation of AgNPs in the presence of Hg²⁺ . Based on these facts, S,N-CDs and AgNPs were exploited to design a sensitive turn-off-on sensor for analysis of Hg²⁺ . The recovered fluorescence signal was proportional to the concentration of Hg²⁺ in the range 1.5-2000 nM with a detection limit of 0.51 nM. The established sensor was used with satisfactory results for measurement of Hg²⁺ in environmental water samples.

Surface-Enhanced Raman Scattering Sensing of Transition Metal Ions in Waters

In this mini-review, we provide a coherent discussion on the sensing schemes exploited in the surface-enhanced Raman scattering (SERS) analysis of transition metal ions in waters. A critical approach was used where illustrative examples are selected to discuss key drawbacks and challenges associated with various experimental configurations and the employed enhancing substrates.

Synthesis and Characterization of Ru-MOFs on Microelectrode for Trace Mercury Detection

Mercury ions (Hg2+) pollution in the water environment can cause serious harm to human health. Trace Hg2+ detection is of vital importance for environmental monitoring. Herein, we report a novel design of Ru-MOFs modified gold microelectrode for Hg2+ determination. Ru-MOFs are synthesized directly by the cathodic method on gold microelectrode, with the covered area accurately controlled. Cathodic synthesized Ru-MOFs show good conductivity and are suitable to be used as the electrode surface material directly. The synergy of the pre-deposition process and the adsorption process of Ru-MOFs can effectively improves the performance of the sensor. The results show good linearity (R2 = 0.996) from 0.1 ppb to 5 ppb, with a high sensitivity of 0.583 μA ppb-1 mm-2. The limit of detection is found to be 0.08 ppb and the test process is within 6 min. Most importantly, the senor has a good anti-interference ability and the recoveries are satisfactory. This miniature electrochemical sensor has the potential for on-site detection of trace mercury in the field.