Cupric ion in combination with hydrogen peroxide and hydroxylamine applied to inactivation of different microorganisms

Trivalent Copper Ion-Mediated Dual Oxidation in the Copper-Catalyzed Fenton-Like System in the Presence of Histidine

The Cu(II)/H2O2 system is recognized for its potential to degrade recalcitrant organic contaminants and inactivate microorganisms in wastewater. We investigated its unique dual oxidation strategy involving the selective oxidation of copper-complexing ligands and enhanced oxidation of nonchelated organic compounds. L-Histidine (His) and benzoic acid (BA) served as model compounds for basic biomolecular ligands and recalcitrant organic contaminants, respectively. In the presence of both His and BA, the Cu(II)/H2O2 system rapidly degraded His complexed with copper ions within 30 s; however, BA degraded gradually with a 2.3-fold efficiency compared with that in the absence of His. The primary oxidant responsible was the trivalent copper ion [Cu(III)], not hydroxyl radical (•OH), as evidenced by •OH scavenging, hydroxylated BA isomer comparison with UV/H2O2 (a •OH generating system), electron paramagnetic resonance, and colorimetric Cu(III) detection via periodate complexation. Cu(III) selectively oxidized His owing to its strong chelation with copper ions, even in the presence of excess tert-butyl alcohol. This selectivity extended to other copper-complexing ligands, including L-asparagine and L-aspartic acid. The presence of His facilitated H2O2-mediated Cu(II) reduction and increased Cu(III) production, thereby enhancing the degradation of BA and pharmaceuticals. Thus, the Cu(II)/H2O2 system is a promising option for dual-target oxidation in diverse applications.

Electrochemical production of hydroxylamine from nitrate on metal electrodes: A comparative study of selectivity and efficiency

Despite the great potential of electrochemical nitrate reduction as a hydroxylamine production method, this strategy has not been sufficiently examined, and the effects of electrode material type on the selectivity and efficiency of this reduction remain underexplored. To bridge this gap, the present study evaluated six metals (Ag, Cu, Ni, Sn, Ti, and Zn) as cathode materials for the electrochemical reduction of nitrate to hydroxylamine, showing that the selectivity of hydroxylamine production was maximal for Sn, while the corresponding faradaic and energy utilization efficiencies were maximal for Ti. Although all tested materials favored nitrate reduction over hydrogen evolution, the disparity in the onset potentials of these reactions did not adequately explain the variations in nitrate removal efficiency, which was found to be influenced by material resistance and charge-transfer properties. The rate constants of elementary nitrate reduction steps determined from the time-dependent concentrations of nitrate and its reduction products (nitrous acid, hydroxylamine, and ammonium) were used to calculate the selectivity and efficiency of hydroxylamine production for each electrode. In turn, these selectivities and efficiencies were correlated with the density functional theory-computed adsorption energies of a key hydroxylamine precursor on different electrodes to afford a volcano-type plot with Ti and Sn at its pinnacle. Thus, this study introduces valuable descriptors and methods for the further screening of electrocatalysts for hydroxylamine generation and the establishment of more environmentally friendly hydroxylamine production techniques utilizing sustainable electricity.

Virucidal activity of Cu-doped TiO2 nanoparticles under visible light illumination: Effect of Cu oxidation state

Copper (Cu) is an effective antimicrobial material; however, its activity is inhibited by oxidation. Titanium dioxide (TiO2) photocatalysis prevents Cu oxidation and improves its antimicrobial activity and stability. In this study, the virucidal efficacy of Cu-doped TiO2 nanoparticles (Cu-TiO2) with three different oxidation states of the Cu dopant (i.e., zero-valent Cu (Cu0), cuprous (CuI), and cupric (CuII) oxides) was evaluated for the phiX174 bacteriophage under visible light illumination (Vis/Cu-TiO2). CuI-TiO2 exhibited superior virucidal activity (5 log inactivation in 30 min) and reusability (only 11 % loss of activity in the fifth cycle) compared to Cu0-TiO2 and CuII-TiO2. Photoluminescence spectroscopy and photocurrent measurements showed that CuI-TiO2 exhibited the highest charge separation efficiency and photocurrent density (approximately 0.24 μA/cm2) among the three materials, resulting in the most active redox reactions of Cu. Viral inactivation tests under different additives and viral particle integrity analyses (i.e., protein oxidation and DNA damage analyses) revealed that different virucidal species played key roles in the three Vis/Cu-TiO2 systems; Cu(III) was responsible for the viral inactivation by Vis/CuI-TiO2. The Vis/CuI-TiO2 system exhibited substantial virucidal performance for different viral species and in different water matrices, demonstrating its potential practical applications. The findings of this study offer valuable insights into the design of effective and sustainable antiviral photocatalysts for disinfection.

Hydroxylamine enhanced the degradation of diclofenac in Cu(II)/peracetic acid system: Formation and contributions of CH3C(O)O•, CH3C(O)OO•, Cu(III) and •OH

The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)O•, CH3C(O)OO•, Cu(III), and •OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO• was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO• mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O• and •OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.

Novel strategy for copper precipitation from cupric complexes wastewater: Catalytic oxidation or reduction self-decomplexation?

Cupric (Cu(II)) complexes in industrial wastewater are responsible for the failure of conventional alkaline precipitation, but the properties of cuprous (Cu(I)) complexes at alkaline circumstance have not been focused. This report proposed a novel strategy for the remediation of Cu(II)-complexed wastewater by coupling alkaline precipitation with green benign reductant, namely, hydroxylamine hydrochloride (HA). This remediation process (HA-OH) exhibits superior Cu removal efficiency that cannot be achieved with the same dosage of oxidants (3 mM). The possibility of Cu(I) activated O₂ catalysis and self-decomplexation precipitation were investigated, and the results identified that ¹O₂ was generated from Cu(II)/Cu(I) cycle, but it was insufficient to annihilate organic ligands. Cu(I) self-decomplexation was the dominate mechanism of Cu removal. For real industrial wastewater, HA-OH process can realize the efficient Cu₂O precipitation and Cu recovery. This novel strategy utilized intrinsic pollutant in wastewater without introducing other metals, complicated materials, and expensive equipment, broadening the insight for the remediation of Cu(II)-complexed wastewater.

A novel three-dimensional flow-through graphite felt-matrix cathode for in-situ hydrogen peroxide generation in multi-environment systems-Multiphysics modeling for in-situ hydrogen peroxide generation

In order to achieve in-situ H₂O₂ generation in multi-environment systems, polyvinylpyrrolidone (PVP) and modified carbon nitride (t-g-C₃N₄) are co-doped onto graphite felt-matrix (GF-matrix) by electrodeposition to develop a novel cathode electrode. By means of 3D-X-ray CT, High-Resolution Transmission Electron Microscope (HRTEM), X-ray Photoelectron Spectrometer (XPS), Raman and Electrochemical Workstation, microscopic physical-chemical properties of materials are researched to optimize the electrode structure. Results show that the optimal electrode presents over H₂O₂ production rate of 2000 mgL^-1·h^-1, and as high as current efficiency of 93% to 98% in simulated freshwater (50 mM Na₂SO₄, pH = 1-12) at 20 mAcm^-2. Furthermore, we built an original three-dimensional (3D) flow-through GF-matrix cathode model on H₂O₂ generation in simulated freshwater, explaining solution pH change reasons from solution inlet to outlet.

Onsite real-time detection of covid-like-virus transmission through air using spark-induced plasma spectroscopy

In March 2020, COVID-19 was officially classified as a pandemic and as a consequence people have adopted strenuous measures to prevent infection, such as the wearing of PPE and self-quarantining, with no knowledge of when the measures will no longer be necessary. Coronavirus has long been known to be non-infectious when airborne; however, studies are starting to show that the virus can infect through airborne transmission and can remain airborne for a significant period of time. In the present study, a spark-induced plasma spectroscopy was devised to characterize the air propagation of the virus in real-time. The risk of air propagation was evaluated in terms of changes in virus concentration with respect to distance traveled and measurement time. Thus, our study provides a benchmark for performing real-time detection of virus propagation and instantaneous monitoring of coronavirus in the air.