Ultra-high synergetic intensity for humic acid removal by coupling bubble discharge with activated carbon

Unravelling the Role of Free Radicals in Photocatalysis

Free radicals are increasingly recognized as active intermediate reactive species that can participate in various redox processes, significantly influencing the mechanistic pathways of reactions. Numerous researchers have investigated the generation of one or more distinct photogenerated radicals, proposing various hypotheses to explain the reaction mechanisms. Notably, recent research has demonstrated the emergence of photogenerated radicals in innovative processes, including organic chemical reactions and the photocatalytic dissolution of precious metals. To harness the potential of these free radicals more effectively, it is imperative to consolidate and analyze the processes and action modes of these photogenerated radicals. This conceptual paper delves into the latest advancements in understanding the mechanics of photogenerated radicals.

Magnetic field improves ozone production in an atmospheric pressure surface dielectric barrier discharge: understanding the physico-chemical mechanism behind low energy consumption

Herein, we studied the combined effects of the magnetic field and the alternating current driven air surface dielectric barrier discharge on ozone production, and found that a 0.13 T perpendicular magnetic field introduced into the discharge area significantly enhanced the ozone generation performance with a 36-108% increase in ozone number density and 24-80% increase in ozone yield depending on discharge voltage and frequency differences. To reveal the micro physico-chemical mechanism of the influence of a magnetic field and discharge parameters of discharge voltage and frequency on ozone generation, a plasma chemical reaction network involving electron collision-chain reactions was considered. The results show that these parameters jointly influence ozone generation by affecting electron collision reactions and chain chemical reactions by changing the mean electron energy and plasma gas temperature. In this study, both the experimental results and mechanism analysis suggested that an optimal discharge parameter for ozone generation is the magnetic field assisted, low frequency, high voltage (6.5 kHz, 6.5 kV) surface dielectric barrier discharge. These insights provide guidance for optimizing the discharge parameters of the magnetic field assisted discharge to increase ozone production and reduce energy consumption.

Humic Acid Removal in Water via UV Activated Sodium Perborate Process

Humic acid (HA) has complex molecular structure and is capable of adsorption, ion exchange, and chelation with organic and inorganic pollutants in water bodies, worsening water quality and jeopardizing human health and ecological environment. How to effectively remove HA from water is one of the research focuses of this paper. In this study, the UV-activated sodium perborate (SPB) synergistic system (UV/SPB) was established to eliminate HA in water. The effects of initial HA concentration, SPB dose, and initial pH value on the HA elimination were determined, and the main mechanisms of the synergy and HA degradation were explored. The outcomes show that the HA elimination ratio by the sole UV and only SPB system were only 0.5% and 1.5%, respectively. The HA removal of UV/SPB reached 88.8%, which can remove HA more effectively than other systems. Free radical masking experiment proved that hydroxyl radical produced by SPB activation is the main active substance for HA removal. The results of UV-vis absorption spectrum, absorbance ratio, specific UV absorbance, and excitation–emission matrix spectroscopy verified that the UV/SPB system can effectively decompose and mineralize HA.

Enhanced removal of humic acid from piggery digestate by combined microalgae and electric field

Microalgae technology is a promising method for treating piggery digestate, while its removal ability of humic acids (HAs) is poor. Here, an electric field-microalgae system (EFMS) was used to improve the removal of HAs from the piggery digestate. Results indicated that the removal of HAs by EFMS relied on the initial concentration of HAs, electrical intensity, the initial inoculation concentration of microalgae and pH. Values of these parameters were optimized as electrical intensity of 1.2 V/cm, microalgae initial inoculation concentration of 0.1 g/L and pH 5.0. The HAs removal efficiency by EFMS (55.38%) was 13% and 38% higher than that by single electric field and microalgal technology. It was observed that oxidation, coagulation and assimilation contributed to the removal of HAs, suggesting that EFMS could serve as an attractive and cost-effective technique for the removal of HAs from the piggery digestate.

Optimum parameters for humic acid removal and power production by Al-air fuel cell electrocoagulation in synthetic wastewater

Although humic acid (HA) is a complex natural organic matter, it can potentially harm the environment and human health. In this study, aluminum-air fuel cell electrocoagulation (AAFCEC) was used to remove HAs from water while generating electricity. Initial pH, electrolyte concentration, HA concentration electrode distance and external resistance were investigated to determine the power generation and removal efficiency. The results showed that the better performance of power generation has been acquired in the alkaline solution and larger electrolyte concentration and short electrode distance. Further, Al-Ferron complexation timed spectrophotometry was used to determine the Al speciation distribution in the solution under different parameters. The power density of the cell reached 313.47 mW/cm² for the following conditions: 1 g/L NaCl concentration, 3 cm electrode distance, 20 Ω external resistor, and pH 9. After about an hour of electrolysis, the optimum removal rate of HA was above 99%. The results demonstrated that the AAFCEC is an efficient and eco-friendly water treatment process, and it could be further developed and disseminated in the rural areas and households.

Intensified ozonation in packed bubble columns for water treatment: Focus on mass transfer and humic acids removal

Ozonation has been widely applied for the oxidation of contaminants in wastewater, and the disinfection of water. However, low ozone (O₃) mass transfer efficiency in common ozonation reactors requires high O₃ doses and causes high energy consumption. In this study, to intensify the O₃ mass transfer and oxidation of humic acids (HA) solution, a lava rock packed bubble column (LBC) and a metal pall ring packed bubble column (MBC) were developed and evaluated. In comparison with non-packed bubble column (BC), both LBC and MBC enhanced the O₃ mass transfer efficiency and the generation of hydroxyl radicals, thereby increasing the HA removal from an aqueous solution. At applied O₃ dose of 33.3 mg/(L_column h), the HA removal efficiency in BC was only 47%. When MBC and LBC were applied, it increased to 66% and 72%, respectively. Meanwhile, the O₃ utilization efficiency in LBC reached 68%, which was higher than that in MBC (50%) and BC (21%). Consequently, LBC has the lowest energy consumption (E_EO) for HA removal (1.4 kWh/m³), followed by MBC (1.6 kWh/m³) and BC (2.9 kWh/m³). LBC had better performance than MBC due to the adsorptive and catalytic roles of lava rock on the ozonation process. This study demonstrates the advantages of using lava rocks as packed materials in O₃ bubble column over metal pall rings in intensifying O₃ mass transfer and organic matters removal, which provides some insights into promoting the industrial application of O₃.

Microcrystalline Cellulose-Blended Polyethersulfone Membranes for Enhanced Water Permeability and Humic Acid Removal

A novel polyethersulfone (PES)/microcrystalline cellulose (MCC) composite membrane for humic acid (HA) removal in water was fabricated using the phase inversion method by blending hydrophilic MCC with intrinsically hydrophobic PES in a lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) co-solvent system. A rheological study indicated that the MCC-containing casting solutions exhibited a significant increase in viscosity, which directly influenced the composite membrane's pore structure. Compared to the pristine PES membrane, the composite membranes have a larger surface pore size, elongated finger-like structure, and presence of sponge-like pores. The water contact angle and pure water flux of the composite membranes indicated an increase in hydrophilicity of the modified membranes. However, the permeability of the composite membranes started to decrease at 3 wt.% MCC and beyond. The natural organic matter removal experiments were performed using humic acid (HA) as the surface water pollutant. The hydrophobic HA rejection was significantly increased by the enhanced hydrophilic PES/MCC composite membrane via the hydrophobic-hydrophilic interaction and pore size exclusion. This study provides insight into the utilization of a low-cost and environmentally friendly additive to improve the hydrophilicity of PES membranes for efficient removal of HA in water.