Amplified fluorescence detection and adsorption of Au3+ by the fluorescent melamine formaldehyde microspheres incorporated with N and S co-doped carbon dots

A sensitive fluorometric-colorimetric dual-mode intelligent sensing platform for the detection of formaldehyde

Excess formaldehyde (FA) is a strong carcinogen, so the development of a rapid visualized and portable formaldehyde detection platform is of great research importance. A multi-color fluorescence sensing system constituted of model compound (NAHN) and red-emitting InP/ZnS QDs was constructed herein, which can simultaneously realize fluorometric-colorimetric dual-mode sensing when exposed to FA environment. Its preparation process was simplified, the detection process was green, and the limits of detection (LOD) were 0.623 μM and 0.791 μM, respectively. The high recoveries of FA in actual water samples indicated that the sensor had broad application prospects. The prepared fluorescent film can be utilized for rapid visual simulation analysis of FA on the surface of various fruits and vegetables. In addition, a serial logic gate was designed to quickly semi-quantitatively assess FA concentration, which promoted the realization of on-site intelligent evaluation of FA.

Paper-based visualization of auramine O in food and drug samples with carbon dots-incorporated fluorescent microspheres as sensing element

A paper-based assay for visualization of auramine O (AO) was for the first time established by using CFMs as a ratiometric fluorescent probe (RFP). The CFMs were melamine formaldehyde microspheres (MFMs) incorporated with carbon dots (CDs), where the CDs species as sensing units and MFMs as a signal amplification carrier. The proposed RFP can quantitatively measure AO content from 0.0 to 10.0 μM and exhibited an ultralow limit of detection (LOD, 15.7 nM). In particular, obvious luminescence color change of CFMs from blue to green was perceived with naked-eyes and therefore, a solution-based and a paper-based visualization platform were respectively proposed for on-site visual detection of AO with LODs of 1.15 μM and 0.83 μM, separately. Finally, those fluorescence methods were adopted in sensitively quantitative measurement of AO within various food and drug samples, providing new prospects for analysts and technical support in food quality monitoring.

Silicon-Carbon Dots-Loaded Mesoporous Silica Nanocomposites (mSiO2@SiCDs): An Efficient Dual Inhibitor of Cu2+-Mediated Oxidative Stress and Aβ Aggregation for Alzheimer's Disease

The redox-active metal ions, especially Cu2+, are highly correlated to Alzheimer's disease (AD) by causing metal ion-mediated oxidative stress and toxic metal-bound β-amyloid (Aβ) aggregates. Numerous pieces of evidence have revealed that the regulation of metal homeostasis could be an effective therapeutic strategy for AD. Herein, in virtue of the interaction of both amino-containing silane and ethylenediaminetetraacetic acid disodium salt for Cu2+, the silicon-carbon dots (SiCDs) are deliberately prepared using these two raw materials as the cocarbon source; meanwhile, to realize the local enrichment of SiCDs and further maximize the chelating ability to Cu2+, the SiCDs are feasibly loaded to the biocompatible mesoporous silica nanoparticles (mSiO2) with the interaction between residual silane groups on SiCDs and silanol groups of mSiO2. Thus-obtained nanocomposites (i.e., mSiO2@SiCDs) could serve as an efficient Cu2+ chelator with satisfactory metal selectivity and further modulate the enzymic activity of free Cu2+ and the Aβ42-Cu2+ complex to alleviate the pathological oxidative stress with an anti-inflammatory effect. Besides, mSiO2@SiCDs show an inspiring inhibitory effect on Cu2+-mediated Aβ aggregation and further protect the neural cells against the toxic Aβ42-Cu2+ complex. Moreover, the transgenic Caenorhabditis elegans CL2120 assay demonstrates the protective efficacy of mSiO2@SiCDs on Cu2+-mediated Aβ toxicity in vivo, indicating its potential for AD treatment.

Current trends in the detection and removal of heavy metal ions using functional materials

The shortage of freshwater resources caused by heavy metal pollution is an acute global issue, which has a great impact on environmental protection and human health. Therefore, the exploitation of new strategies for designing and synthesizing green, efficient, and economical materials for the detection and removal of heavy metal ions is crucial. Among the various methods for the detection and removal of heavy ions, advanced functional systems including nanomaterials, polymers, porous materials, and biomaterials have attracted considerable attention over the past several years due to their capabilities of real-time detection, excellent removal efficiency, anti-interference, quick response, high selectivity, and low limit of detection. In this tutorial review, we review the general design principles underlying the aforementioned functional materials, and in particular highlight the fundamental mechanisms and specific examples of detecting and removing heavy metal ions. Additionally, the methods which enhance water purification quality using these functional materials have been reviewed, also current challenges and opportunities in this exciting field have been highlighted, including the fabrication, subsequent treatment, and potential future applications of such functional materials. We envision that this tutorial review will provide invaluable guidance for the design of functional materials tailored towards the detection and removal of heavy metals, thereby expediting the development of high-performance materials and fostering the development of more efficient approaches to water pollution remediation.

A Novel One-Step Reactive Extrusion Process for High-Performance Rigid Crosslinked PVC Composite Fabrication Using Triazine Crosslinking Agent@Melamine-Formaldehyde Microcapsules

In this work, we propose, for the first time, a simple, fast, and efficient strategy to fabricate high-performance rigid crosslinked PVC composites by continuous extrusion. This strategy improves the poor processing fluidity of composites and solves the impossibility of conducting extrusion in one step via using microcapsule-type crosslinking agents prepared by in situ polymerization to co-extrude with PVC blends. The results demonstrate that the PVC/microcapsule composites were successfully prepared. Within the studied parameters, the properties of crosslinked PVC gradually increased with the addition of microcapsules, and its Vicat softening temperature increased from 79.3 °C to 86.2 °C compared with pure PVC. This study shows the possibility for the industrial scale-up of the extrusion process for rigid crosslinked PVC.

Controllable synthesis of bifunctional magnetic carbon dots for rapid fluorescent detection and reversible removal of Hg2

Mercury is one of the most toxic heavy metals, whose identification and separation are crucial for environmental remediation. Till now, it remains a significant challenge upon simultaneous detection and removal of Hg²⁺. Herein, bifunctional probe magnetic carbon dots were synthesized and optimized via systematic structure manipulation of the carbon and iron precursors towards fluorescence, Hg²⁺ adsorption and magnetic separation. The probe exhibited blue emission at 440 nm with high quantum yield of 55 % and a high paramagnetism with the saturation magnetization value of 22.70 emu/g. Furthermore, the fluorescent detection of Hg²⁺ with limit of 5.40 nM and high selectivity were achieved through surface structure manipulation with moderate -NH₂, -SH and Fe contents. As a result, the magnetic removal of Hg²⁺ was consecutively effectuated with high removal efficiency of 98.30 %. The detection and recovery of Hg²⁺ in real samples were further verified and demonstrated the excellent environmental tolerance of probe. The reusability was viable with recycling at least three turns by external magnet. This work not only provides a promising approach for simultaneous detection and removal of heavy metal pollution, but also provides an excellent example as a versatile platform for multifunction integration via the structure manipulation for other applications.

Nitrogen-Doped and Sulfonated Carbon Dots as a Multifunctional Additive to Realize Highly Reversible Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (ZIBs) using the Zn metal anode have been considered as one of the next-generation commercial batteries with high security, robust capacity, and low price. However, parasitic reactions, notorious dendrites and limited lifespan still hamper their practical applications. Herein, an eco-friendly nitrogen-doped and sulfonated carbon dots (NSCDs) is designed as a multifunctional additive for the cheap aqueous ZnSO₄ electrolyte, which can overcome the above difficulties effectively. The abundant polar groups (-COOH, -OH, -NH₂ , and -SO₃ H) on the CDs surfaces can regulate the solvation structure of Zn²⁺ through decreasing the coordinated active H₂ O molecules, and thus redistribute Zn²⁺ deposition to avoid side reactions. Some of the negatively charged NSCDs are adsorbed on Zn anode surface to isolate the H₂ O/SO₄ ^2- corrosion through the electrostatic shielding effect. The synergistic effect of the doped nitrogen species and the surface sulfonic groups can induce a uniform electrolyte flux and a homogeneous Zn plating with a (002) texture. As a result, the excellent cycle life (4000 h) and Coulombic efficiency (99.5%) of the optimized ZIBs are realized in typical ZnSO₄ electrolytes with only 0.1 mg mL^-1 of NSCDs additive.

Anchoring Cu Nanoclusters on Melamine-Formaldehyde Microspheres: A New Strategy for Triggering Aggregation-Induced Emission toward Specific Enzyme-Free Methyl Parathion Sensing

Methyl parathion (MP) residues have aroused extensive attention on account of their significant threat to the environment and food safety. Currently reported fluorescent methods used for MP sensing largely depend upon an enzyme. Designing a facile and specific enzyme-free MP fluorescent sensor is in great demand, which remains a challenge. Here, negatively charged Cu nanoclusters (CuNCs) anchored on positively charged melamine-formaldehyde (MF) microspheres (MF@CuNCs) through an electrostatic interaction were prepared. MF microspheres triggered aggregation-induced emission (AIE) of CuNCs and successfully circumvented the shortcomings of poor stability and low luminescence of CuNCs. The fluorescence intensity of MF@CuNCs can be quenched by p-nitrophenol produced by MP under alkaline conditions. Accordingly, a specific enzyme-free MP sensing method was constructed with MF@CuNCs. In combination with a smartphone, visually quantitative analysis of MP in a fast and portable way was also achieved. For the first time, AIE of CuNCs used for enzyme-free MP sensing was successfully explored in this work, and it is believed that this method will open a new pathway for AIE of CuNCs to be applied in various applications.

Recent developments in the removal of metal-based engineered nanoparticles from the aquatic environments by adsorption

Nowadays, metal-based engineered nanoparticles (m-ENPs) are ubiquitous in aquatic environments for their wide applications in all walks of life. m-ENPs have been demonstrated to exert ecotoxicity, cytotoxicity and genotoxicity towards organisms and even humans. Therefore, the removal of m-ENPs from water has recently become a hot global concerned issue. Adsorption is widely investigated for this purpose, owing to its advantages of low cost, easy operation, high removal efficiency and potential recycling use of both the adsorbents and adsorbates. As the adsorption and related technologies were hardly comprehensively overviewed for the removal of m-ENPs, herein, the present review particularly focuses on this topic. The fundamentals to the technology, including adsorption isotherm, adsorption dynamics, the adsorption process with the special emphasis on the relationship between surface area and porosity of the adsorbent and the adsorption capacity, etc., are fully discussed. As the kernel of the adsorption method, adsorbents with diversified chemical and physical properties in different types are comprehensively elaborated. The primary factors affecting the adsorption, and adsorption mechanisms are well summarized. Particularly, the regeneration of the adsorbents and the reuse of adsorbed m-ENPs are highlighted for the sustainability. Finally, challenges and prospects in this field are outlined. Overall, this review aims to provide valuable references for the development of new adsorbents with more efficient and practical applications to remove m-ENPs and direct the future study.

A novel signal-on fluorometric sensor based on metal ion-mediated carbon dots for formaldehyde determination and lysosome-targeted bioimaging

Preparation of Ag-M-NSCDs for the fluorometric detection of formaldehyde and lysosome-targeted bioimaging.

An Imidazole Thione-Modified Polyhedral Oligomeric Silsesquioxane for Selective Detection and Adsorptive Recovery of Au(III) from Aqueous Solutions

Developing a material toward simultaneous detection and recovery of gold ions (Au(III)) is highly desirable for the economy and the environment. Herein, we report a highly efficient dual-function material for simultaneous Au(III) detection and recovery by simply introducing abundant imidazole thione and thioether groups in one system. This material, that is, an imidazole thione-modified polyhedral oligomeric silsesquioxane (POSS-2), was prepared by a mild reaction of an imidazolium-containing POSS and sulfur at ambient temperature. The POSS-2 suspension in water can rapidly and selectively detect Au(III) with a very low limit of detection of 1.2 ppb by fluorescence quenching or a visualized color change from white to dark orange. POSS-2 can also selectively and efficiently capture Au(III) with a maximum adsorption uptake of 1486.5 mg/g. The adsorption process well fits with the pseudo-second-order kinetic and Langmuir models. The intriguing dual-function performance is better than most of the previous Au(III) probes or adsorbents. The mechanism study reveals that the detection and adsorption behavior are mainly caused by the redox reaction and coordination between imidazole thione and thioether groups and Au(III). Furthermore, POSS-2 was successfully utilized to extract gold without interference from a discard CPU. These results indicate the potential application of the present dual-function material for Au(III) detection and recovery from aqueous solutions. More dual-functional materials could be designed and prepared by this simple strategy.

N, S doped carbon quantum dots inside mesoporous silica for effective adsorption of methylene blue dye

This study aimed to develop non-metal elements for doping carbon quantum dots (CQDs) with nitrogen and sulfur (N, S-CQDs), which loaded inside hexagonal mesoporous silica (HMS) in order to effectively remove methylene blue dye (MB) from an aqueous solution. The histidine and cysteine amino acids were used as the source for synthesis N, S-CQDs through the hydrothermal method. Morphology and structure of the N, S-CQDs, and adsorbent (N, S-CQDs/HMS) were characterized by using different microscopic and spectroscopic techniques. The adsorption parameters such as adsorbent dosage (0.25–1 g/L), pH (2–10), contact time (15–75 min), and initial MB dye concentration (20–300 mg/L) were investigated. The maximum adsorption capacity and removal efficiency of MB were determined at 370.4 mg/g and 97%, respectively, under optimum conditions at 303 K. The adsorption isotherm studies were fitted with the Freundlich isotherm equation, and the dye removal kinetics of the adsorbent followed the pseudo-second-order model. Thermodynamic studies showed that the adsorption process had exothermic and spontaneous behavior. The removal of MB next to the Rhodamine B and Reactive Black 5 dyes indicated that the N, S-CQDs/HMS had excellent selective behavior for MB absorption. This prepared adsorbent could be well recycled with suitable activity after four repeated adsorption–desorption cycles. Results revealed that the porous characters, surface area, charge properties, reduction in the bandgap, and quantum yield of the N, S-CQDs/HMS were essential factors that affected dye adsorption.