Facile synthesis of sulfhydryl modified covalent organic frameworks for high efficient Hg(II) removal from water

Rapid, easy and catalyst-free preparation of magnetic thiourea-based covalent organic frameworks at room temperature for enrichment and speciation of mercury with HPLC-ICP-MS

The complex and cumbersome preparation of magnetic covalent organic frameworks (COFs) nanocomposites on a small scale limits their application. Herein, a rapid and easy route was employed for the preparation of magnetic thiourea-based COFs nanocomposites. COFs were coated on Fe3O4 nanoparticles at room temperature without a catalyst within approximately 30 min. This method is suitable for the large-scale preparation of magnetic adsorbent. Using the as-prepared magnetic adsorbent (Fe3O4@COF-TpTU), we developed a simple, efficient, and sensitive magnetic solid-phase extraction-high performance liquid chromatography-inductively coupled plasma-mass spectrometry (MSPE-HPLC-ICP-MS) for the enrichment and determination of mercury species, including Hg2+, methylmercury (MeHg), and ethylmercury (EtHg). The effects of the experimental parameters on the extraction efficiency, including solution pH, adsorption and desorption time, composition and volume of the elution solvent, salinity, coexisting ions, and dissolved organic matter, were comprehensively investigated. Under optimised conditions, the limits of detection in the developed method were 0.56, 0.34, and 0.47 ng L-1 with enrichment factors of 190, 195, and 180-fold for Hg2+, MeHg, and EtHg, respectively. The satisfactory spiked recoveries (97.0-103%) in real water samples and high consistency between the certified and determined values in a certified reference material demonstrate the high accuracy and reproducibility of the developed method. The as-proposed method with simple operation, high sensitivity, and excellent anti-matrix interference performance was successfully applied to the enrichment and determination of trace levels of mercury species in the natural samples with complicated matrices, such as underground water, surface water, seawater and biological samples.

Insight into microbial functional genes' role in geochemical distribution and cycling of uranium: The evidence from covering soils of uranium tailings dam

There exists a research gap on microbial functional genes' role in U geochemical behavior and cycling in U contaminated soils, which has been poorly understood. Herein, 16S rRNA sequencing gene amplifiers and metagenome analysis were applied to probe microbial community structure and functional metabolism of different depth layers of covering soils in U tailings dam. Results showed that the soils were highly enriched with U (47.5-123.3 mg/kg) and a remarkable portion of 35-70% was associated with the labile fractions. It was found that U geochemical distribution was notably interacted with functional genes from N, S, Fe and P related microbes. Importantly, diminution in gene NirK and amplification in nrfH involving in nitrate reduction could induce microbial tolerance to U. Moreover, gene Sat in microbial sulfate reduction, NosZ and NorB in nitrate reduction, phnD, upgA and upgC in P transportation and phnI, phnK, phoA and opd in microbial organic P mineralization, were all closely linked to U geochemical distribution, species and cycling. All these findings disclose the functional genes that may control the transfer and transformation behavior of U in soil environment, which provides important and novel indications for the bio-remediation strategies towards U polluted sites.

Synthetic of functionalized magnetic titanium-based metal-organic frameworks to efficiently remove Hg(Ⅱ) from wastewater

The rapid development of process technology has led to rapid daily industrial production, which also produced a large amount of waste liquid. At the same time, the existing treatment technology cannot keep up with the demand, resulting in the malicious destruction of the environment by wastewater, especially mercury-containing wastewater was very harmful. Effective means of removing mercury ions need to be found. With magnetic ferric oxide as the core and titanium-based metal-organic frameworks as the shell, a new type of magnetic adsorbent (BTA-MIL-125(Ti)@Fe3O4) was synthesized. Materials were tested by multiple characterization methods and multiple sets of experiments. At optimal pH 6, the removal rate in 100 ppm Hg(Ⅱ) was as high as 95.8%. The theoretical adsorption capacity was 615 mg/L. Isothermal experiments, kinetic experiments and thermodynamic experiments have respectively verified that the material was a kind of adsorption material with self-emission heat based on chemical action and synergistic adsorption with Hill model. By simulating the immunity of a variety of ions (Cu, Zn, Mg, Ni, Cd), the material itself also exhibited a very high affinity for Hg(Ⅱ). The results of five high-cycle stable adsorption proved the repeatable stability of the material itself. Various characterization methods have also shown that nitrogen and sulfur-containing groups chelated with Hg(Ⅱ). All of the above was enough to show that the BTA-MIL-125(Ti)@Fe3O4 was a magnetic adsorption material with excellent performance and great prospects.

Preparation and study of straw porous biochar with aromatic ring structure for adsorption performance and mechanism toward TNT red water

2,4,6-Trinitrotoluene (TNT) production processes generate a substantial amount of toxic wastewater. Therefore, it is crucial to identify efficient and sustainable methods for treating this wastewater. This paper explores the application of sustainable biomass-derived carbon produced from rice straw for the adsorption of 2,4,6-trinitrotoluene (TNT) red water. The rice straw-derived biochar (SBC) materials were synthesized by two-step reactions through hydrothermal carbonization and chemical activation with KOH. Characterization of the fabricated biochar was conducted using various techniques. Here, the chemical oxygen demand (COD) was used as an evaluation index for adsorption efficiency. The adsorption kinetics showed a good fit with the pseudo-second-order model, and the adsorption equilibrium was achieved in 30 min. The biochar's high surface area (1319 m2/g) and large pore volume (1.058 cm3/g) gave it a large adsorption capacity. The Langmuir model exhibited better correlation for equilibrium data analysis, with a maximum adsorption capacity of 173.9 mg/g at 298 K. The SBC was found to have a high removal effect over a wide pH range (from 1 to 13) and showed remarkable stability after undergoing five desorption-adsorption cycles using ethanol and acetone as eluent. The results provide a simple and low-cost method for the efficient treatment of TNT red water.

Efficient and selective removal of mercury ions from aqueous solution by 2,5-dimercaptothiadiazole covalently grafted chitosan derivative

The increasingly serious problem of mercury pollution has caused wide concern, and exploring the adsorbent materials with high adsorption capacity is a simple and effective approach to address this concern. In this study, chitosan (CS), 2,5-dimercaptothiadiazole (DMTD) and formaldehyde solution are used as raw materials to prepare the modified CS material (DMTD-CS) by one-pot method. Adequate characterizations suggest that DMTD-CS is highly cross-linked, and the specific surface area and pore volume are 126.91 m2/g and 0.6702 cm3/g, respectively. By investigating the Hg(II) adsorption properties of DMTD-CS, the maximum adsorption capacity at 318 K reaches 628.09 mg/g, this value is higher than that of CS and most of the reported CS derivatives. Adsorption kinetics and isotherms indicate that the adsorption behaviors of DMTD-CS conform to the pseudo-second-order kinetic model and Langmuir isotherm model, and in the coexistence of various metal ions, DMTD-CS shows very good selectivity for Hg(II). Additionally, the removal of DMTD-CS to Hg(II) is still at 80.06 % after six adsorption-desorption cycles, demonstrating outstanding recyclability. The further FT-IR and XPS analysis suggest that the synergistic complexation of O, N and S atoms on DMTD-CS with Hg(II) is an important factor leading to the high adsorption capacity.

Ultrasensitive detection and efficient removal of mercury ions based on covalent organic framework spheres with double active sites

In present work, a new spherical covalent organic framework (TFPB-APTU COF) with good photoelectric property and double active sites (secondary amine (-NH-) group and sulfur (S) atom) was prepared for ultrasensitive detection and efficient removal of mercury ions (Hg2+). The -NH- group and S atom can capture free Hg2+ by coordination and chelation interaction, and the related steric hindrance effect reduces the photocurrent signal of the TFPB-APTU COF, resulting in the highly sensitive photoelectrochemical analysis of Hg2+ with a wide linear response range (0.01-100000 nM) and low detection limit (0.006 nM). On the other hand, the developed TFPB-APTU COF has large removal capacity (2692 mg g-1), good regeneration capability, and high removal speed for Hg2+ removal based on the double active sites (-NH- group and S atom), large specific surface area and porous spherical structure. The developed TFPB-APTU COF spheres show great potential in monitoring and treatment of environmental pollution of Hg2+.

Hierarchical porous loofah-like carbon with sulfhydryl functionality for electrochemical detection of trace mercury in water

Mercury is a common contaminant found in natural waters, which is highly toxic to human health. Thus, the facile and reliable monitoring of mercury in waters is of great significance. In this study, we fabricated a novel loofah-like hierarchical porous carbon with sulfhydryl functionality (S-LHC), and applied it as an ultrasensitive sensor for the electrochemical detection of mercury in water. The S-LHC was prepared through the direct pyrolysis of a triazole-rich metal-organic framework (MOF), followed by chemical modification using thioglycolic acid. The highly conductive N-doped carbon framework of S-LHC facilitated the electron transfer in mercury electrochemical sensing. Meanwhile, the open hierarchical pore structure and abundant sulfhydryl groups allowed the fast diffusion and effective enrichment of mercury ions. Consequently, the S-LHC sensor exhibited an exceptionally high sensitivity for mercury ions, with the mercury detection limit (0.36 nM) orders of magnitude lower than the regulated values in drinking water (typically 10∼30 nM). The constructed sensor also afforded good anti-interference ability and excellent stability for long-term detection of mercury in a variety of complex real water samples. The present study provides not only a facile method for mercury detection, but also a new idea for the construction of highly sensitive electrochemical sensors.

One-step synthesis of thiol-functionalized metal coordination polymers: effective and superfast removal of Hg (II) in the different matrices to ppb level

The mercury in water bodies has posed a great threat to the environment and humans, and removing mercury and purifying wastewater has become a global environmental issue. Adopting Zn(II) coordination polymers (Zn-CPs) emerged as a new approach, however, the kind of Zn-CPs, which solely consisted of amino groups, exhibited unsatisfactory performance in capturing Hg(II) at a low level and causing the subsequent leaching of Zn(II) after adsorption. In this study, we fabricated the thiol-modified Zn-based coordination polymers (Zn-CPs-SH) through a one-step solvothermal reaction to efficiently capture Hg(II) from wastewater. Its preeminent adsorption performance could be maintained across a broad range of pH (2-7), ion strength (Cl-, SO42-, and NO3- at 0-10,000 mg/L), and dissolved organic matter (0-100 mg/L). The impressive properties, including fast kinetics (k2∼1.01 × 10-4 L/min), outstanding adsorption capacity (1278.72 mg/g, 298 K), superior selectivity (Kd∼2.3 × 104 mL/g), and excellent regeneration capability (Re = 93.54% after 5 cycles), were attributed to the ultra-abundance of adsorption sites donating from thiol groups, which was revealed by XPS analysis, DFT calculations, and molecular orbital theory. Noteworthy, the high practical application potential of Zn-CPs-SH was demonstrated by its outstanding Hg(II) removal efficiency (Re ≥ 99.10%) in various Hg(II)-spiked water matrices, e.g., tap water, river water, and industrial wastewater. Importantly, the residual Hg(II) in the treated water declined to the ppb level without any Zn(II) leaching. Overall, it is highly anticipated that the incorporation of Zn-CPs-SH would facilitate the practical implementation of highly efficient Hg(II) removal in wastewater treatment owing to its exhibiting high selective affinity, superior adsorption capacity, and enhanced efficiency.

FeSx@MOF-808 composite for efficient As(III) removal from wastewater: behavior and mechanism

Arsenic is extremely toxic to humans with water as its carrier. One challenge for arsenic control is the complete elimination of As(III) due to its high toxicity, mobility, and solubility. Herein, an active FeS_x@MOF-808 composite was fabricated to enhance the As(III) removal for wastewater remediation. The FeS_x@MOF-808 showed better As(III) adsorptive performance (Q_e = 73.60 mg/g) compared with Fe₂S₃ (Q_e=12.38 mg/g), MOF-808 (Q_e = 27.85 mg/g), and Fe@MOF-808 (Q_e=34.26 mg/g). This can be attributed to an improved porous structure provided by MOF-808 and abundant reactive sites provided by FeS_x. Calculated by the Langmuir model (R² =0.9965), the maximum adsorption capacity (Q_max) of FeS_x@MOF-808 for As(III) removal at 298 K and pH = 7 was 203.28 ± 6.43 mg/g, which is beyond most of the traditional materials and MOFs. Additionally, FeS_x@MOF-808 exhibited good stability in a wide pH range (1-13). Results also showed that the different Fe/S ratios (1:0-1:8) and FeS_x loading amount (0.00625-0.25 mmol) have effects on the FeS_x@MOF-808 performance. By kinetics studies, XPS, and DFT calculation, the mechanisms for arsenic by FeS_x@MOF-808 were proposed. Multiple reaction mechanisms combine the adsorption by the MOF-808 support, the co-precipitation of iron oxides via hydroxyl (Fe-OH) groups, and most importantly, the precipitation through the break of Fe-S and the bond of As-S.

Strategies for microbial bioremediation of environmental pollutants from industrial wastewater: A sustainable approach

Heavy metals are hazardous and bring about critical exposure risks to humans and animals, even at low concentrations. An assortment of approaches has been attempted to remove the water contaminants and keep up with water quality, for that microbial bioremediation is a promising way to mitigate these pollutants from the contaminated water. The flexibility of microorganisms to eliminate a toxic pollutant creates bioremediation an innovation that can be applied in various water and soil conditions. This review insight into the sources, occurrence of toxic heavy metals, and their hazardous human exposure risk. In this review, significant attention to microbial bioremediation for pollutant mitigation from various ecological lattices has been addressed. Mechanism of microbial bioremediation in the aspect of factors affecting, the role of microbes and interaction between the microbes and pollutants are the focal topics of this review. In addition, emerging strategies and technologies developed in the field of genetically engineered micro-organism and micro-organism-aided nanotechnology has shown up as powerful bioremediation tool with critical possibilities to eliminate water pollutants.

Advanced Covalent Organic Framework-Based Membranes for Recovery of Ionic Resources

Membrane technology has shown a viable potential in conversion of liquid-waste or high-salt streams to fresh waters and resources. However, the non-adjustability pore size of traditional membranes limits the application of ion capture due to their low selectivity for target ions. Recently, covalent organic frameworks (COFs) have become a promising candidate for construction of advanced ion separation membranes for ion resource recovery due to their low density, large surface area, tunable channel structure, and tailored functionality. This tutorial review aims to analyze and summarize the progress in understanding ion capture mechanisms, preparation processes, and applications of COF-based membranes. First, the design principles for target ion selectivity are illustrated in terms of theoretical simulation of ions transport in COFs, and key properties for ion selectivity of COFs and COF-based membranes. Next, the fabrication methods of diverse COF-based membranes are classified into pure COF membranes, COF continuous membranes, and COF mixed matrix membranes. Finally, current applications of COF-based membranes are highlighted: desalination, extraction, removal of toxic metal ions, radionuclides and lithium, and acid recovery. This review presents promising approaches for design, preparation, and application of COF-based membranes in ion selectivity for recovery of ionic resources.

Immobilization on anionic metal(loid)s in soil by biochar: A meta-analysis assisted by machine learning

Metal pollution in soil has become one of the most serious environmental problems in China. Biochar is one of the most widely used remediation agents for soil metal pollution. However, the literature does not provide a consistent picture of the performance of biochar on the immobilization of anionic metal(loid)s, especially arsenic, in soil. To obtain a baseline understanding on the interactions of metals and biochar, 597 data records on four metal(loid)s (As, Cr, Sb and V) were collected from 70 publications for this meta-analysis, and the results are highlighted below. Biochar has a significant immobilization effect on anionic metal(loid)s in soil and reduces the bioavailability of these metals to plants. Subgroup analysis found that biochar could decrease the potential mobility of Cr, Sb and V, but the immobilization effect on As was not always consistent. Meanwhile, biochar pH and soil pH are the most key factors affecting the immobilization effect. To summarize, biochar can effectively immobilize Cr, Sb and V in soil, but more attention should be given to As immobilization in future applications. By regulating the properties of biochar and appropriate modification, anionic metal(loid)s in soil can be immobilized more effectively. Hence, both of the soil quality and crop quality can be improved.

Impact of sulfhydryl ligands on the transformation of silver ions by molybdenum disulfide and their combined toxicity to freshwater algae

The transformation of silver ions (Ag⁺) mediated by engineered nanomaterials (ENMs) influences the biosafety of Ag-containing products in natural environments. Actually, modification of biomolecules to ENMs in aquatic ecosystems alters their interactions with Ag⁺. This study discovered that surface functionalization of glutathione (GSH, a sulfhydryl compound ubiquitous in natural waters) on molybdenum disulfide (MoS₂) nanoflakes suppressed the redox reaction between 1 T components and Ag⁺, inhibiting the MoS₂-mediated reduction of Ag⁺ to Ag nanoparticles (AgNPs) in aqueous phase in the dark. However, AgNPs formation (from 2.32 ± 0.35-3.25 ± 0.29 mg/L per day, pH 7.0) and oxidation of MoS₂ were remarkably accelerated after GSH binding under light conditions. The dominant electron donator of MoS₂ to Ag⁺ was transformed from the electron-hole pairs to surface ligands driven by the introduction of chromophoric groups was authenticated as the cause for the elevated Ag⁺ reduction. These processes also occurred between Ag⁺ and MoS₂ at low levels (50 μg/L). Additionally, the joint algal toxicity of GSH-modified MoS₂ with Ag⁺ was weaker than that of pristine MoS₂ due to increased retention of free Ag⁺ and AgNPs formation. Our findings improve the understanding of the interaction between ENMs and Ag⁺ in aquatic ecosystems.

Thioether-functionalized porphyrin-based polymers for Hg2+ efficient removal in aqueous solution

In this paper, thioether-functionalized porphyrin-based polymers (TPPs) were constructed according to two different "bottom-up" and "top-down" strategies and they were applied for Hg²⁺ capture in aqueous solution. TPP1, which was constructed by one-step polycondensation of 2,5-bis(methylthio) terephthalaldehyde (BMTA) with pyrrole according to the "bottom-up" strategy, owned high Brunauer-Emmett-Teller (BET) surface area (S_BET, 554 m²/g), pore volume (V_total, 0.32 cm³/g), and S content (16.8%), resulting in high Hg²⁺ capture (913 mg/g) with high removal efficiency (> 99%). The adsorption mechanism clarified that the strong coordination between the S species and Hg²⁺ was the main driving force. In comparison, TPP2 and TPP3 were fabricated by the thioether functionalization of the porphyrin-based polymers according to the "top-down" strategy. They showed much lower S_BET, V_total, and S content for the reason that the post-functionalization process greatly blocked the pores and the functional sites were hardly fully post-functionalized, resulting in much lower Hg²⁺ capture (555 mg/g and 609 mg/g, respectively). This work reveals the advantage of the "bottom-up" strategy for the construction of the thioether-functionalized polymers and it offers the guidance for the construction of some other thioether-functionalized polymers.

An environmentally benign synthesis of Fe3O4 nanoparticles to Fe3O4 nanoclusters: Rapid separation and removal of Hg(II) from an aqueous medium

In the field of nanotechnology, nanoadsorbents have emerged as a powerful tool for the purification of contaminated aqueous environments. Among the variety of nanoadsorbents developed so far, magnetite (Fe₃O₄) nanoparticles have drawn particular interest because of their quick separation, low cost, flexibility, reproducibility, and environmentally benign nature. Herein, we describe a new strategy for the synthesis of Fe₃O₄ nanoclusters, which is based on the use of naturally available edible mushrooms (Pleurotus eryngii) and environmentally benign propylene glycol as a solvent medium. By tuning the temperature, we successfully convert Fe₃O₄ nanoparticles into Fe₃O₄ nanoclusters via hydrothermal treatment, as evidenced by transmission electron microscopy. The Fe₃O₄ nanoclusters are functionalized with an organic molecule linker (dihydrolipoic acid, DHLA) to remove hazardous Hg(II) ions selectively. Batch adsorption experiments demonstrate that Hg(II) ions are strongly adsorbed on the material surface, and X-ray photoelectron and Fourier transform infrared spectroscopy techniques reveal the Hg(II) removal mechanism. The DHLA@Fe₃O₄ nanoclusters show a high removal efficiency of 99.2 % with a maximum Hg(II) removal capacity of 140.84 mg g^-1. A kinetic study shows that the adsorption equilibrium is rapidly reached within 60 min and follows a pseudo second-order kinetic model. The adsorption and separation system can be readily recycled using an external magnet when the separation occurs within 10 s. We have studied the effect of various factors on the adsorption process, including pH, concentration, dosage, and temperature. The newly synthesized superparamagnetic DHLA@Fe₃O₄ nanoclusters open a new path for further development of the medical, catalysis, and environmental fields.

Porosity Design on Conjugated Microporous Poly(Aniline)S for Exceptional Mercury(II) Removal

The use of conjugated microporous polymers (CMPs) in practical wastewater treatment demands further design on the pore structure, otherwise their adsorption capacities toward heavy-metal ions were moderate. Here, we report a rational design approach, which produces hybrid molecular pores in conjugated microporous poly(aniline)s (CMPAs) for mercury removal. It is achieved through a delicate interval introduction of linkers with differential molecular lengths during polymerization, acquiring both diffusion channels and storage pores for radical enhancement of mass transfer and adsorption storage. The resulting CMPA-M featured a large adsorption capacity of 975 mg g^-1 and rapid kinetics that could remove 94.8% of 50 mg g^-1 of mercury(II) within a very short contact time of 48 s, with a promising initial adsorption rate h as high as 113 mg g^-1 min^-1, which was 2.54-fold larger in the adsorption capacity and 45.2-fold faster in the adsorption efficiency compared with the undeveloped CMPAs. More importantly, our CMPA-M-2, with robust stability and easy reusability, was able to scavenge over 99.9% of mercury(II) from the actual wastewater in a harsh condition with a very low pH of 0.77, extremely high salinity of 53,157 mg L^-1, and complex impurities, featuring exceptional selectivity that allows us to extract and recycle a high purity of 99.1% of mercury from the wastewater. These outcomes demonstrate the unprecedented potential of CMPs for environmental remediation and real-world mercury extraction and present benchmarks for CMP-based mercury adsorbents.

Recent Advances in Covalent Organic Frameworks for Heavy Metal Removal Applications

Covalent organic frameworks comprise a unique class of functional materials that has recently emerged as a versatile tool for energy-related, photocatalytic, environmental, and electrochromic device applications. A plethora of structures can be designed and implemented through a careful selection of ligands and functional units. On the other hand, porous materials for heavy metal absorption are constantly on the forefront of materials science due to the significant health issues that arise from the release of the latter to aquatic environments. In this critical review, we provide insights on the correlation between the structure of functional covalent organic frameworks and their heavy metal absorption. The elements we selected were Pb, Hg, Cr, Cd, and As metal ions, as well as radioactive elements, and we focused on their removal with functional networks. Finally, we outline their advantages and disadvantages compared to other competitive systems such as zeolites and metal organic frameworks (MOFs), we analyze the potential drawbacks for industrial scale applications, and we provide our outlook on the future of this emerging field.

Structural Characteristics and Environmental Applications of Covalent Organic Frameworks

Covalent organic frameworks (COFs) are emerging crystalline polymeric materials with highly ordered intrinsic and uniform pores. Their synthesis involves reticular chemistry, which offers the freedom of choosing building precursors from a large bank with distinct geometries and functionalities. The pore sizes of COFs, as well as their geometry and functionalities, can be pre-designed, giving them an immense opportunity in various fields. In this mini-review, we will focus on the use of COFs in the removal of environmentally hazardous metal ions and chemicals through adsorption and separation. The review will introduce basic aspects of COFs and their advantages over other purification materials. Various fabrication strategies of COFs will be introduced in relation to the separation field. Finally, the challenges of COFs and their future perspectives in this field will be briefly outlined.