Peroxidase-like recyclable SERS probe for the detection and elimination of cationic dyes in pond water

Advancements in reusable SERS substrates for trace analysis applications

Surface Enhanced Raman Spectroscopy (SERS) technique is an effective analytical technique in which fingerprint information about analytes can be obtained, can provide detection limit performance at the single molecule level, and analyzes are performed in a single step without any intermediate steps. SERS technique offers additional benefits rather than other analytical techniques including high selectivity, ultrasensitive detection, uncomplicated protocols, in situ sampling, on-set capability and cost-effectiveness. As a result of the combination of developments in materials and nanotechnology science with the SERS analysis technique, this technique strengthens its use advantage day by day. The most important factor that limited the use of this technique was the fact that the solution containing the desired analyte(s) was dropped onto the SERS substrate and the same substrate could not be reused in subsequent analyses. To solve this problem, scientists have focused on developing reusable SERS substrates in recent years. In these studies, scientists basically used three SERS substrate cleaning applications (1) washing the SERS substrate with a suitable solvent that can elute the analyte from SERS surface after analysis, (2) cleaning the SERS substrate with catalytic degradation of analytes after analysis by modifying them with catalytic active materials and (3) Applying plasma cleaning procedure to SERS substrate after analysis and (4) applying adsorption and desorption procedure prior to SERS analysis. Herein, the aim of this review article is to evaluate the reusable SERS substrates-based methods based on their level of development and their potential to recycle. This review offers a coherent discussion on a wide range of sensing schemes employed in fabricating the SERS substrates. We utilized a critical approach in which elaborative examples were selected to highlight key shortcomings of various experimental configurations. In the same vein, there is a discussion of the advantages and limitations concerning the key instrumental advances and the expansion of the recent methods developed in this area.

A MXene Hydrogel-Based Versatile Microrobot for Controllable Water Pollution Management

The urgent demand for addressing dye contaminants in water necessitates the development of microrobots that exhibit remote navigation, rapid removal, and molecular identification capabilities. The progress of microrobot development is currently hindered by the scarcity of multifunctional materials. In this study, a plasmonic MXene hydrogel (PM-Gel) is synthesized by combining bimetallic nanocubes and Ti3C2Tx MXene through the rapid gelation of degradable alginate. The hydrogel can efficiently adsorb over 60% of dye contaminants within 2 min, ultimately achieving a removal rate of >90%. Meanwhile, the hydrogel exhibits excellent sensitivity in surface enhanced Raman scattering (SERS) detection, with a limit of detection (LOD) as low as 3.76 am. The properties of the plasmonic hydrogel can be further adjusted for various applications. As a proof-of-concept experiment, thermosensitive polymers and superparamagnetic particles are successfully integrated into this hydrogel to construct a versatile, light-responsive microrobot for dye contaminants. With magnetic and optical actuation, the robot can remotely sample, identify, and remove pollutants in maze-like channels. Moreover, light-driven hydrophilic-hydrophobic switch of the microrobots through photothermal effect can further enhance the adsorption capacity and reduced the dye residue by up to 58%. These findings indicate of a broad application potential in complex real-world environments.

Advancing stroke therapy: the potential of MOF-based nanozymes in biomedical applications

In this study, we explored the growing use of metal-organic framework (MOF)-based Nanozymes in biomedical research, with a specific emphasis on their applications in stroke therapy. We have discussed the complex nature of stroke pathophysiology, highlighting the crucial role of reactive oxygen species (ROS), and acknowledging the limitations of natural enzymes in addressing these challenges. We have also discussed the role of nanozymes, particularly those based on MOFs, their structural similarities to natural enzymes, and their potential to improve reactivity in various biomedical applications. The categorization of MOF nanozymes based on enzyme-mimicking activities is discussed, and their applications in stroke therapy are explored. We have reported the potential of MOF in treating stroke by regulating ROS levels, alleviation inflammation, and reducing neuron apoptosis. Additionally, we have addressed the challenges in developing efficient antioxidant nanozyme systems for stroke treatment. The review concludes with the promise of addressing these challenges and highlights the promising future of MOF nanozymes in diverse medical applications, particularly in the field of stroke treatment.

A new and highly efficient CuMOF-based nanoenzyme and its application to the aptamer SERS/FL/RRS/Abs quadruple-mode analysis of ultratrace malachite green

Malachite green (MG) is highly toxic, persistent, and carcinogenic, and its widespread use is a danger to the ecosystem and a threat to public health and food safety, making it necessary to develop new sensitive multimode molecular spectroscopy methods. In this work, a new copper-based nanomaterial (CuNM) was prepared by a high-temperature roasting using a copper metal-organic framework (CuMOF) as precursor. The as-prepared CuNM was characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), and BET surface area analysis. CuNM was found to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H2O2 to produce the oxidation product TMBOX; however, subsequently, the MG aptamer (Apt) could be adsorbed on the CuNM surface by intermolecular interaction, which would inhibit the catalytic performance. After the addition of MG to be tested, the CuNM previously adsorbed by the Apt was transformed into its free state, thus restoring its catalytic activity. This new nanocatalytic indicator reaction could be monitored by surface-enhanced Raman scattering (SERS)/resonance Rayleigh scattering (RRS)/fluorescence (FL)/absorption (Abs) quadruple-mode methods. The SERS determination range was 0.004-0.4 nmol L-1 MG, with a limit of detection of 0.0032 nM. In this way, a rapid, stable, and sensitive method for the determination of MG residues in the environment was established.

Critical role of zero-valent iron in the efficient activation of H2O2 for 4-CP degradation by bimetallic peroxidase-like

Peroxidase-like based on double transition metals have higher catalytic activity and are considered to have great potential for application in the field of pollutant degradation. First, in this paper, a novel Fe0-doped three-dimensional porous Fe0@FeMn-NC-like peroxidase was synthesized by a simple one-step thermal reduction method. The doping of manganese was able to reduce part of the iron in Fe-Mn binary oxides to Fe0 at high temperatures. In addition, Fe0@FeMn-NC has excellent peroxidase-like mimetic activity, and thus, it was used for the rapid degradation of p-chlorophenol (4-CP). During the degradation process, Fe0 was able to rapidly replenish the constantly depleted Fe2+ in the reaction system and brought in a large number of additional electrons. The ineffective decomposition of H2O2 due to the use of H2O2 as an electron donor in the reduction reactions from Fe3+ to Fe2+ and from Mn3+ to Mn2+ was avoided. Finally, based on the experimental results of LC-MS and combined with theoretical calculations, the degradation process of 4-CP was rationally analyzed, in which the intermediates were mainly p-chloro-catechol, p-chloro resorcinol, and p-benzoquinone. Fe0@FeMn-NC nano-enzymes have excellent catalytic activity as well as structural stability and perform well in the treatment of simulated wastewater containing a variety of phenolic pollutants as well as real chemical wastewater. It provides some insights and methods for the application of peroxidase-like enzymes in the degradation of organic pollutants.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

SERS Tracking Oxidative Stress on a Metalloporphyrin Framework by Vitamin C

Accurate control of charge transfer is crucial to investigate the catalytic reaction mechanism of the biological oxidation process that biomedicine participates in. Herein, we have established an assembly model of metalloporphyrin framework (MPF) nanosheets as the active centers of biological enzymes. The introduction of Vitamin C (VC) into the MPF system can precisely modulate its content of charges. The surface-enhanced Raman scattering activity and peroxidase-like catalytic performance are enhanced simultaneously for the first time by manipulating the optimal molar ratio of an MPF to VC and the reaction sequence with target model molecules. We have confirmed that the formation of the intermediate of Fe(2+)-OOH species is specifically enhanced after VC modulation, which indicates that VC can regulate the oxidative stress of the active center of biological enzymes. This discovery not only accurately resolves the mechanism of VC-selective anticancer therapy but also has important significance for the precise treatment of VC synergistic targeting medicines.

Enantiomeric discrimination by chiral electromagnetic resonance enhancement

Circularly polarized light interacts preferentially with the biomolecules to generate spectral fingerprints reflecting their primary and secondary structure in the ultraviolet region of the electromagnetic spectrum. The spectral features can be transferred to the visible and near-infrared regions by coupling the biomolecules with plasmonic assemblies made of noble metals. Nanoscale gold tetrahelices were used to detect the presence of chiral objects that are 40 times smaller in size by using plane-polarized light of 550 nm wavelength. The emergence of chiral hotspots in the gaps between 80 nm long tetrahelices differentiate between weakly scattering S- vs R-molecules with optical constants similar to that of organic solvents. Simulations map the spatial distribution of the scattered field to reveal enantiomeric discrimination with selectivity up to 0.54.

Research Progress of SERS Sensors Based on Hydrogen Peroxide and Related Substances

Hydrogen peroxide (H2O2) has an important role in living organisms, and its detection is of great importance in medical, chemical, and food safety applications. This review provides a comparison of different types of Surface-enhanced Raman scattering (SERS) sensors for H2O2 and related substances with respect to their detection limits, which are of interest due to high sensitivity compared to conventional sensors. According to the latest research report, this review focuses on the sensing mechanism of different sensors and summarizes the linear range, detection limits, and cellular applications of new SERS sensors, and discusses the limitations in vivo and future prospects of SERS technology for the detection of H2O2.

Layer-by-layer coating of natural diatomite with silver nanoparticles for identification of circulating cancer protein biomarkers using SERS

Surface-enhanced Raman scattering (SERS) is an emerging spectroscopy technique for detecting and characterizing chemical or biological structures in the vicinity of plasmonic nanostructures. Colloidal, solid, and flexible nanostructures are widely used in SERS experiments to enhance the Raman intensity. The nanostructure used in SERS is one of the main influencing parameters and a growing research area. Fabrication of simple and cheap SERS substrates with a high enhancement factor is desired. In this study, we fabricated a reproducible, cheap, and flexible SERS active strip by coating natural diatomite (biosilica) with silver nanoparticles (AgNPs) using the layer-by-layer assembly method and the fabricated strip is used for the label-free identification of circulating cancer protein biomarkers. SERS active strips were fabricated having different numbers of AgNP layers on natural diatomite and comprehensive characterization techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV/vis absorption spectrophotometry were used. SERS activities of the strips depending on the number of layers were evaluated using 4-aminothiophenol (4-ATP) and rhodamine 6G (Rh6G) molecules. We found that the SERS intensity is strongly dependent on the number of AgNP layers, with the maximum SERS intensity obtained from the strip with 5 layers of AgNPs, having a 2.0 × 105 enhancement factor. The strip with the highest SERS activity was used for the label-free identification of circulating cancer protein biomarkers (HER2, CA15-3, PSA, MUC4, and CA27-29). The results demonstrate that the fabricated strip can help in the effective label-free identification of circulating protein biomarkers and open new directions for SERS-based label-free biosensing applications.

A highly sensitive surface-enhanced Raman scattering sensor with MIL-100(Fe)/Au composites for detection of malachite green in fish pond water

Concerns about food safety have been arisen due to the improper use of chemicals in aquaculture. Malachite green (MG) has attracted attention because of its illegal usage and its potential negative impacts on the environment and public health. Surface-enhanced Raman scattering (SERS) platforms coupled with different SERS substrates have been employed for rapid analysis of MG residues in food. However, the most commonly used SERS substrates were non-reusable and showed limited detection sensitivity. In this study, a novel SERS substrate with a good recyclability and a high sensitivity was prepared by electrostatically assembling together a metal-organic framework material called materials of institute lavoisie-100(Fe) (MIL-100(Fe)) and Au NPs. The lowest detectable concentration of MG was 10^-13 M based on the optimal substrate. The SERS sensor was applied for the detection of the trace MG in fish pond water, which was accomplished with the correlation coefficients R² = 0.991-0.996 in a concentration range of 10^-6-10^-13 M. Moreover, MIL-100(Fe)/Au was recycled at least five times, realizing a "detection to degradation", showing great potential for food contamination monitoring due to its distinguished performance.

Effective fabrication of cellulose nanofibrils supported Pd nanoparticles as a novel nanozyme with peroxidase and oxidase-like activities for efficient dye degradation

Nanozyme-based dye degradation methods are promising for the remediation of water pollution. Though Pd nanoparticles (PdNPs) are known to act as nanozymes, their dye degradation capability has not been investigated. Low nanozyme activities, easy aggregation, difficulties in recovery and reuse are the major challenges in achieving this. For the first time, cellulose nanofibrils-supported PdNPs (PdNPs/PCNF) as a novel nanozyme with good peroxidase and oxidase-mimicking activities and easy recyclability is explored for dye degradation. An efficient and rapid method of PdNPs/PCNF preparation was demonstrated by adjusting the pH and microwave irradiation. Enzyme kinetic studies revealed good kinetic parameters and specific activities of 415 and 277 U/g for peroxidase and oxidase, respectively. PdNPs/PCNF offered 99.64% degradation of methylene blue within 12 min (0.468 min^-1) with 0.4 M H₂O₂ at pH 5.0. Mechanistic studies revealed the involvement of hydroxyl and superoxide radicals. Owing to the network-like structure of PCNF, films and foams were prepared, their dye degradation potentials were compared, and recyclability was tested. Successful degradation of mixed dye solutions and spiked real water samples was achieved and a continuous flow method was demonstrated using a foam-packed column.

One-step fabrication of Au-Ag alloys and its application for catalysts and SERS sensors

Au-Ag alloy nanoparticles (NPs) with controllable size and composition were synthesized by a facile, one-pot hydrothermal method. Various characterization techniques including TEM, UV-vis, EDX, HAADF-STEM and XPS were used to discuss the influencing factors for the size and composition of Au-Ag alloy NPs. It is obvious that the size and composition of Au-Ag alloy NPs could be adjusted by the experimental parameters. Catalytic and SERS performance of the Au-Ag alloy NPs were further investigated. Ideal catalytic and SERS performance could be also obtained via optimizing the size and composition of Au-Ag alloy. This work is of importance in theory research and practical application of the noble metal nanocomposites.

Synergistical Starvation and Chemo-Dynamic Therapy for Combating Multidrug-Resistant Bacteria and Accelerating Diabetic Wound Healing

The application of the antibiotic drug has dramatically decreased the infection and promoted the development of surgery, but drug-resistant bacteria appeared along with the abuse of antibiotics. Especially, wound in diabetic patients provides more glucose for bacteria resulting in poor wound healing. Therefore, it is imminent to explore advanced agents for combating multidrug-resistant bacteria and accelerating diabetic wound healing. Herein, metal-organic frameworks based nanoreactors loaded with glucose oxidase (GOx) and peroxidase-like bovine hemoglobin (BHb) are designed to construct an effective cascaded catalytic antibacterial system. Therein, GOx can cost the glucose, and release H₂ O₂ simultaneously, which can then be transformed into hydroxyl radicals by BHb. As a result, the as-prepared nanoreactors can play the roles of both starving and killing toward the multidrug-resistant bacteria. Furthermore, the produced gluconic acid can reduce the pH of working condition, which is beneficial for both the enhancement of peroxidase activity and the inhibition of the bacteria growth. More importantly, the constructed nanoreactors can be degraded and excreted from the body in the form of feces, which render the as-proposed nanoreactors qualified as effective and safe materials for both combating multidrug-resistant bacteria in vitro and accelerating the diabetic wound healing in vivo of the mouse model.

SERS Gas Sensors Based on Multiple Polymer Films with High Design Flexibility for Gas Recognition

The Surface-Enhanced Raman Scattering (SERS) technique is utilized to fabricate sensors for gas detection due to its rapid detection speed and high sensitivity. However, gases with similar molecular structures are difficult to directly discriminate using SERS gas sensors because there are characteristic peak overlaps in the Raman spectra. Here, we proposed a multiple SERS gas sensor matrix via a spin-coating functional polymer to enhance the gas recognition capability. Poly (acrylic acid) (PAA), Poly (methyl methacrylate) (PMMA) and Polydimethylsiloxane (PDMS) were employed to fabricate the polymer film. The high design flexibility of the two-layer film was realized by the layer-by-layer method with 2 one-layer films. The SERS gas sensor coated by different polymer films showed a distinct affinity to target gases. The principle component analysis (PCA) algorithm was used for the further clustering of gas molecules. Three target gases, phenethyl alcohol, acetophenone and anethole, were perfectly discriminated, as the characteristic variables in the response matrix constructed by the combination of gas responses obtained 3 one-layer and 3 two-layer film-coated sensors. This research provides a new SERS sensing approach for recognizing gases with similar molecular structures.