Phenolic nitroaromatics detection by fluorinated metal-organic frameworks: Barrier elimination for selective sensing of specific group of nitroaromatics

Amino-Functionalized NDI-Based MOFs as Unusual "Turn On" and "Turn Off" Fluorescent Sensors for Phenolic Pollutants with Double Solvent Channel Response and Iodine Adsorbents

Regulating mixed ligands to change the functional properties of metal-organic frameworks (MOFs) has been an important topic; especially, the structural changes have significant implications for the transformation of sensing response in different solvent channels. Herein, two [Cd (DPNDI) (NH2-BDC)0.5(NO3)]·2.25DMF (1) and [Cd(DPNDI)(NH2-AIPA)]·0.5DMF (2) (DPNDI = N,N-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide, NH2-BDC = 2-amino terephthalic acid, NH2-AIPA = 5-aminoisophthalic acid) were synthesized by the solvothermal method. Structural analysis shows that complex 1 has a two-dimensional planar network structure and complex 2 exhibits a three-dimensional network structure, endowing its potential as an efficient fluorescence sensor for phenolic compound detection under different solvent environments. Both complexes showed high fluorescence quenching sensitivity to phenolics in a water medium. Conversely, complex 1 showed a fluorescence enhancement response to phenolic pollutants in an ethanol system with significantly low detection limits and recyclability. The detection limits were 0.58 μM for TNP, 1.3 μM for DNP, and 2.43 μM for PCP. In addition, the uncoordinated amino groups in the complexes promote them to exhibit excellent iodine adsorption performance. Especially, complex 2 can serve as an adsorbent for iodine in cyclohexane solution with better adsorption efficiency than that of complex 1, and its adsorption capacity can reach 505 mg/g. The mixed ligands regulation strategy of NDI-based MOFs will open up an effective avenue for the conversion of fluorescence signals in dual-solvent channels and play simultaneously important roles in multiple applications.

New Transition Metal Coordination Polymers Derived from 2-(3,5-Dicarboxyphenyl)-6-carboxybenzimidazole as Photocatalysts for Dye and Antibiotic Decomposition

Coordination polymers (CPs) are an assorted class of coordination complexes that are gaining attention for the safe and sustainable removal of organic dyes from wastewater discharge by either adsorption or photocatalytic degradation. Herein, three different coordination polymers with compositions [Ni(HL)(H2O)2·1.9H2O] (1), [Mn3(HL)(L)(μ3-OH)(H2O)(phen)2·2H2O] (2), and [Cd(HL)4(H2O)]·H2O (3) (H3L = 2-(3,5-dicarboxyphenyl)-6-carboxybenzimidazole; phen = 1,10-phenanthroline) have been synthesized and characterized spectroscopically and by single crystal X-ray diffraction. Single crystal X-ray diffraction results indicated that 1 forms a 2D layer-like framework, while 2 exhibits a 3-connected net with the Schläfli symbol of (44.6), and 3 displays a 3D supramolecular network in which two adjacent 2D layers are held by π···π interactions. All three compounds have been used as photocatalysts to catalyze the photodegradation of antibiotic dinitrozole (DTZ) and rhodamine B (RhB). The photocatalytic results suggested that the Mn-based CP 2 exhibited better photodecomposition of DTZ (91.1%) and RhB (95.0%) than the other two CPs in the time span of 45 min. The observed photocatalytic mechanisms have been addressed using Hirshfeld surface analyses.

Selective Supramolecular Recognition of Nitroaromatics by a Fluorescent Metal-Organic Cage Based on a Pyridine-Decorated Dibenzodiaza-Crown Macrocyclic Co(II) Complex

Two isomorphous fluorescent (FL) lantern-shaped metal-organic cages 1 and 2 were prepared by coordination-directed self-assembly of Co(II) centers with a new aza-crown macrocyclic ligand bearing pyridine pendant arms (L_py). The cage structures were determined using single-crystal X-ray diffraction analysis, thermogravimetric, elemental microanalysis, FT-IR spectroscopy, and powder X-ray diffraction. The crystal structures of 1 and 2 show that anions (Cl^- in 1 and Br^- in 2) are encapsulated within the cage cavity. 1 and 2 bear two coordinated water molecules that are directed inside the cages, surrounded by the eight pyridine rings at the "bottom" and the "roof" of the cage. These hydrogen bond donors, π systems, and the cationic nature of the cages enable 1 and 2 to encapsulate the anions. FL experiments revealed that 1 could detect nitroaromatic compounds by exhibiting selective and sensitive fluorescence quenching toward p-nitroaniline (PNA), recommending a limit of detection of 4.24 ppm. Moreover, the addition of 50 μL of PNA and o-nitrophenol to the ethanolic suspension of 1 led to a significant large FL red shift, namely, 87 and 24 nm, respectively, which were significantly higher than the corresponding values observed in the presence of other nitroaromatic compounds. The titration of the ethanolic suspension of 1, with various concentrations of PNA (>12 μM) demonstrated a concentration-dependent emission red shift. Hence, the efficient FL quenching of 1 was capable of distinguishing the dinitrobenzene isomers. Meanwhile, the observed red shift (10 nm) and quenching of this emission band under the influence of a trace amount of o- and p-nitrophenol isomers also showed that 1 could discriminate between o- and p-nitrophenol. Replacement of the chlorido with a bromido ligand in 1 generated cage 2 which was a more electron-donating cage than 1. The FL experiments showed that 2 was partially more sensitive and less selective toward NACs than 1.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

A water-soluble small molecular fluorescent sensor based on phosphazene platform for selective detection of nitroaromatic compounds

Nitro-aromatic compounds have a deleterious effect on the environment and they are extremely explosive. Therefore, societal concern about exposure to nitro-aromatic compounds encourages researchers to develop selective and sensitive detection platforms for nitro-aromatic compounds in recent years. In this paper, a new 100% water-soluble cyclotriphosphazene-based bridged naphthalene material (4) was prepared as a small molecule fluorescent sensor for ultra-selective detection of nitro-aromatic compounds. The chemical structure of 4 was extensively characterized by mass spectrometry and nuclear magnetic resonance spectroscopies (³¹P, ¹³C, ¹H). The photo-physical properties of the newly developed sensing system were investigated by steady-state fluorescence and UV-Vis absorption spectroscopies. The fluorescence sensor behaviors were extensively evaluated after treatment with the most commonly used metal cations, anions, competitive aromatic compounds, saccharides, and organic acids. The developed fluorescent sensing system (4) demonstrated ultra-selective fluorescence "turn-off" signal change toward nitro-aromatic compounds while other tested competitive species caused negligible changes. To evaluate selectivity, time-resolved, steady-state 3D-fluorescence and UV-Vis absorption spectroscopies were used in fully aqueous media. Moreover, theoretical calculations (density functional theory and time-dependent density functional theory) were applied and discussed to identify fluorescence sensing mechanisms toward nitroaromatic compounds for the presented sensing system.

Pyrene, Anthracene, and Naphthalene-Based Azomethines for Fluorimetric Sensing of Nitroaromatic Compounds

Special attention is given to the development of rapid and sensitive detection of nitroaromatic explosives for homeland security and environmental concerns. As part of our contribution to the detection of nitroaromatic explosives, fluorescent materials (A), (B) and (C) were synthesized from the reaction of 1,2-diaminocyclohexane with pyrene-1-carbaldehyde, anthracene-9-carbaldehyde and 2-hydroxy-1-naphthaldehyde, respectively. The structures of the prepared fluorescent azomethine probes were confirmed using FTIR, ¹H-NMR and ¹³C-NMR spectroscopies. The basis of the study is the use of the synthesized materials as fluorescent probes in the photophysical and fluorescence detection of some nitroaromatic explosives. Emission increases occurred due to aggregation caused by π-π stacking in synthesized azomethines. To measure the nitroaromatic detection capabilities of fluorescence probes, fluorescence titration experiments were performed using the photoluminescence spectroscopy. It was observed that compound A containing pyrene ring provided the best emission intensity-increasing effect due to aggregation with the lowest LOD value (14.96 μM) for the sensing of 4-nitrophenol. In compounds B and C, nitrobenzene with the lowest LOD (16.15 μM and 23.49 μM respectively) caused the most regular emission increase, followed by picric acid.

Nano-Based Drug Delivery of Polyphenolic Compounds for Cancer Treatment: Progress, Opportunities, and Challenges

Polyphenols and their derivates, a kind of natural product distributed in herb plants, vegetables, and fruits, are the most abundant antioxidants in the human diet and have been found to display cancer-preventative effects in several epidemiological studies. The scientific community has also validated the anti-cancer bioactivities and low toxicities of polyphenolic compounds, including flavones, tannins, phenolic acids, and anthocyanins, through in vitro and in vivo studies. However, the low stability, weak targeting ability, poor solubility, and low bioavailability of pure polyphenolic agents have significantly impaired their treatment efficacy. Nowadays, nano-based technology has been applied to surmount these restrictions and maximize the treatment efficacy of polyphenols. In this review, we summarize the advantages and related mechanisms of polyphenols in cancer treatment. Moreover, aiming at the poor solubility and low bioavailability of pure polyphenols in vivo, the advantages of nano-based delivery systems and recent research developments are highlighted. Herein, particular emphasis is mainly placed on the most widely used nanomaterials in the delivery of natural products, including liposomes, micelles, and nanogels. Finally, we present an overview and the challenges of future implementations of nano-based delivery systems of polyphenolic compounds in the cancer therapeutic field.

Photophysical and Fluorescence Nitroaromatic Sensing Properties of Methylated Derivative of a Pamoic Acid Ester

Rapid and selective detection of nitroaromatic explosives is very important for public safety, life, and environmental health. Current instrumental techniques suffer from high cost and poor site used. In order to investigate fluorescence sensing of nitroaromatics, we prepare a new small fluorescence probe derived from pamoic acid. This study covers the synthesis of Pamoic acid based [diisopropyl 4,4'-methylenebis(3-methoxy-2-naphthoate)] (2) material and characterization of its structure. The methylation of Pamoic acid ester, which we have successfully synthesized in our previous studies, was carried out in this study. Determination of the photophysical and fluorescent nitroaromatic detection properties of the compound forms the basis of the study. Structural characterization of the synthesized compound [diisopropyl 4,4'-methylenebis(3-methoxy-2-naphthoate)] (2) was characterized using spectroscopic methods. In addition, Molecular structure of the synthesized compound was determined by single crystal X-ray diffraction studies. In the final step, compounds [diisopropyl 4,4'-methylenebis(3-hydroxy-2-naphthoate)] (1) and [diisopropyl 4,4'-methylenebis(3-methoxy-2-naphthoate)] (2) were tested as fluorescent probes for the detection of some nitroaromatic explosives. It is seen that Nitrobenzene provides the best quenching effect on the compound [diisopropyl 4,4'-methylenebis(3-hydroxy-2-naphthoate)] (1) containing the -OH group, with lowest the limit of detection (LOD) value. It was observed that Picric acid provided the best quenching effect with lowest the limit of detection (LOD) value in the compound [diisopropyl 4,4'-methylenebis(3-methoxy-2-naphthoate)] (2) obtained by methylation of the -OH group in the compound [diisopropyl 4,4'-methylenebis(3-hydroxy-2-naphthoate)] (1).

Recent advances of the core-shell MOFs in tumour therapy

Coordination chemistry has always been vital to explore the material prominence of metal-organic systems. The metal-organic chemistry plays a fundamental role in decisive structural features, which are accountable for tuning the properties of materials. Tumour therapy has become an important research field of medical treatment in the world. Metal-organic frameworks (MOFs) have attracted extensive interest in medical science research due to their large effective surface area, clear pore network, and critical catalytic performance. Compared with traditional MOF materials, MOF materials with core-shell structures have a higher loading rate and better stability, which can overcome a single function. They have been successfully used in tumour medical research and have excellent prospects for diagnosing and treating various tumours. The current review article thoroughly describes the various synthetic approaches for engineering core-shell MOF materials, the structural types, and the potential functional applications. We also discussed core-shell MOF materials for the various treatment of tumours, such as tumour chemotherapy, tumour phototherapy and tumour microenvironment anti-hypoxia therapy. In this paper, the synthesized procedures of core-shell MOFs and their applications for tumour treatment have been discussed, and their future research has prospected. The current improved strategies, challenges, and prospects are also presented because of the metal-organic chemistry governing the structural modification of core-shell MOFs for tumour therapy applications. Therefore, the present review article opens a new door for medicinal chemists to tune the structural features of the core-shell MOF materials to modulate tumour therapy with simple, low-cost materials for better human lives.

Non-aqueous onion like nano-carbons from waste diesel-soot used as FRET-based sensor for sensing of nitro-phenols

Herein, a simple-functionalization method is described to prepare the oleylamine functionalized non-aqueous version of onion-like nanocarbons (ONC-OA), where ONC was isolated from the waste pollutant soot exhausted from the diesel engine. The surface group analysis of ONC-OA has been investigated via Nuclear Magnetic Resonance and X-ray Photoelectron Spectroscopy. ONC-OA shows blue fluorescence with a quantum yield of ∼6% in tetrahydrofuran (THF). The fluorescence-based sensing applications of ONC-OA has been investigated for selective sensing of toxic aromatic nitro-phenols compounds (para-nitro, dinitro, and trinitro phenols) from the tested many nitro organic compounds. Based on the limit of detection values, ONC-OA shows much better results for tri-nitro phenol compared to di and mono nitrophenol. To understand the quenching mechanism, a time-resolved photoluminescence analysis of the sensor with and without the addition of quenchers is performed. The effective lowering in fluorescence lifetime of the sensor after the addition of quenchers concludes that the quenching observed is majorly due to the Förster Resonance Energy Transfer (FRET) mechanism. The real-life application of ONC-OA was analyzed by external spiking of N-PhOHs in soil samples.

Cage Bismuth Metal-Organic Framework Materials Based on a Flexible Triazine-Polycarboxylic Acid: Subgram Synthesis, Application for Sensing, and White Light Tuning

Bismuth-based metal-organic frameworks (MOFs) have always attracted the attention of many researchers. Here, we first report a crystalline Bi-MOF (Bi-TDPAT) based on a flexible triazine-polycarboxylic linker 2,4,6-tris(3,5-dicarboxylphenylamino)-1,3,5-triazine (H₆TDPAT) and bismuth nitrate; its crystallite quality is adequately good and the diffraction data can be collected directly by single crystal X-ray diffraction rather than 3D electron diffraction. The structure of Bi-TDPAT belongs to a novel topology type btt. Notably, the synthesis scale of Bi-TDPAT can be expanded, and sub-gram synthesis can be realized. At the same time, we synthesized a microcrystalline material Bi-TATAB utilizing 2,4,6-tris(4-carboxylphenylamino)-1,3,5-triazine (H₃TATAB). The structures of the two materials were characterized by several microanalysis tools. Considering that Bi-TDPAT is a blue light-emitting material with a broad emission peak, we prepared a white light emitting composite material Eu/Tb@Bi-TDPAT by encapsulating Eu(III)/Tb(III) in Bi-TDPAT. In addition, the fluorescence sensing functions of Bi-TDPAT and Bi-TATAB were explored. The results showed that they could detect and recognize various nitrophenols, and the optimal limit of detection is as low as 0.21 μM, which can be reused even after five cycles. Energy competitive absorption (CA) and photo-induced electron transfer are the main sensing mechanisms. By comparing and analyzing the properties of these two bismuth-based crystalline materials, we believe that this work also provides inspiration for the synthesis and development of bismuth-based MOF in the future.

Construction of a 3D Metal-Organic Framework and Its Composite for Water Remediation via Selective Adsorption and Photocatalytic Degradation of Hazardous Dye

In this work, a new bimetallic Na(I)-Zn(II) metal-organic framework (MOF), formulated as [Na₂Zn₃(btc)₂(μ-HCOO)₂(μ-H₂O)₈] _n (1) (H₃btc = benzene tricarboxylic acid), and its composite (ZnO@1) have been successfully synthesized using solvothermal and mechanochemical solid grinding methods. 1 and ZnO@1 were characterized by diffraction [single-crystal X-ray diffraction (XRD) and powder XRD], spectroscopic (ultraviolet-visible diffuse reflectance spectroscopy and Fourier transform infrared spectroscopy), microscopic (transmission electron microscopy), and thermal (thermogravimetric analysis) methods. The surface area and porosity of 1 were determined using a Brunauer-Emmett-Teller analyzer. Single-crystal diffraction of 1 confirms that Na1 and Zn2 have octahedral coordination environments, whereas Zn1 has a tetrahedral coordination geometry. Topological simplification of 1 shows a 3,6-connected kgd net. Na(I)-Zn(II) MOF (1) is crystallized with slight porosity and exhibits good tendency toward the encapsulation of zinc oxide nanoparticles (ZnO NPs). The photocatalytic behaviors of 1 and its composite (ZnO@1) were investigated over MB dye under sunlight illumination with promising degradation efficiencies of 93.69% for 1 and 97.53% for ZnO@1 in 80 min.

Current status and prospects of metal-organic frameworks for bone therapy and bone repair

With the development of society, traumatic bone defects caused by accidents, diseases and surgeries have become common, eventually resulting in an increase in bone defects. The treatment of bone defects is characterized by a long period of treatment, high cost and uncontrollable outcomes. Also, it results in complications such as infection and bone discontinuity. Hence, due to this situation, the physical, mental and financial aspects of the patient are severely affected. What's more, such outcomes pose a challenge to orthopaedic surgeons. As a result, bone therapy and bone repair have become a hot topic of interest. In repairing bone defects, materials other than autogenous bone are still unable to provide good biocompatibility, osteogenesis, osteoconductivity and osteoinduction properties at the same time. In addition, the scarcity of autologous bone sources has forced the search for new autologous bone replacement materials. Metal organic frameworks (MOFs) are a new class of developed functional materials that have been widely used in the biomedical field during the recent years due to their porous nature, large specific surface area and diverse structures. With the progress in the investigation into bone treatment and repair, more and more investigators are using MOFs in bone therapy and bone repair. With these viewpoints, in the present perspective, the use of MOFs in bone therapy and bone repair has been summarized, and an insight into the future of MOFs in bone therapy and bone repair has been provided.

A Dihydrotetrazine-Functionalized Metal-Organic Framework as a Highly Selective Luminescent Host-Guest Sensor for Detection of 2,4,6-Trinitrophenol

Pore decoration of metal-organic frameworks (MOFs) with functional groups is a useful strategy to attain high selectivity toward specific analytes, especially in the presence of interfering molecules with similar structures and energy levels, through selective host-guest interactions. In this work, we applied a dihydrotetrazine-decorated MOF, TMU-34, with the formula [Zn(OBA)(H₂DPT)_0.5]_n·DMF, where H₂OBA is 4,4'-oxybis(benzoic acid) and H₂DPT is 3,6-bis(pyridin-4-yl)-1,4-dihydro-1,2,4,5-tetrazine, for the highly selective detection of phenolic NACs, especially TNP (94% quenching efficiency, detection limit 8.1 × 10^-6 M, K_SV = 182663 mol L^-1), in the presence of other substituted NACs especially -NH₂-substituted NACs. Investigations reveal that the quenching mechanism is dominated by photoinduced MOF-to-TNP electron transfer through possible hydrogen-bonding interactions between the phenolic hydroxyl group of TNP and dihydrotetrazine functions of TMU-34. Despite extensive publications on the detection of TNP in the presence of other NACs, the significance of this work will be elucidated if attention is paid to the fact that TMU-34 is among the rare and highly selective MOF-based TNP sensors in the presence of -NH₂-substituted NACs as the serious interferers.

The pioneering role of metal-organic framework-5 in ever-growing contemporary applications - a review

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties. MOF-5 based composites possess ample applications in modern chemistry. Huge surface area, suitable pore dimensions and scope of tunability make MOF-5 noteworthy in advanced materials. The extensive features of MOF-5 provided an opportunity for researchers to explore atomic/molecular scale materials. Various MOF-5 based composites have been designed with revamped properties appropriate to the application by altering and fabricating MOF-5 in situ or using a post-synthetic approach. Surface modification via the dispersion and impregnation of active substances into the pores of MOF-5 enhances its applicability. The boundless topologies and morphologies of MOF-5 combined with other chemical entities has provided opportunities in various fields, including catalysis, gas storage and sensors. The present review illuminates the leading role of MOF-5 and its composites in contemporary applications based on the current literature in heterogeneous catalysis, H₂ and CO₂ storage and sensors.

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties.

A multimodal Metal-Organic framework based on unsaturated metal site for enhancing antitumor cytotoxicity through Chemo-Photodynamic therapy

Chemodynamic therapy when combined with chemotherapy opens up a new avenue for treatment of cancer. However, its development is still restricted by low targeting, high dose and toxic side effects. Herein, rational designing and construction of a new multifunctional platform with the core-shell structure 5-ALA@UiO-66-NH-FAM@CP1 (ALA = 5-aminolevulinic acid, CP1 = zirconium-pemetrexed (Zr-MTA)) has been performed. In this platform, CP1 acting as a shell is encapsulated with the UiO-66-NH₂ to engender a core-shell structure that promotes and achieves a high MTA loading rate through high affinity between MTA and unsaturated Zr site of UiO-66-NH₂. The 5-ALA and 5-carboxyl fluorescein (5-FAM) was successfully loaded and covalently combined with UiO-66-NH₂ due to its high porosity and presence of amino groups. The characterization results indicated that the loading rate of MTA (41.03 wt%) of platform is higher than the reported values. More importantly, the in vitro and in vivo results also demonstrated that it has a good folate targeting ability and realizes high efficient antitumor activity by chemotherapy combied with photodynamic therapy (PDT). This newly developed multifunctional platform could provide a new idea for designing and constructing the carrier with chemotherapy and PDT therapy.

A Pyrene-Rhodamine FRET couple as a chemosensor for selective detection of picric acid

Selective detection of nitroaromatic compounds such as Picric acid (PA), those being explosive materials and hazardous pollutants of environmental and biological concern is highly desirable. With the operational advantages of the chemosensing approach, a pyrene-rhodamine-B couple (1) was explored in this investigation as a ratiometric molecular probe for selective and sensitive detection of picric acid. The bi-fluorophoric probe displayed absorption and fluorescence enhancements along with colourless to reddish-brown colour transition as signaling responses in the selective presence of PA among all the nitro aromatic analyte investigated. The signaling module relies on PA- mediated modulation of various operational photo-physical processes such as (a) inhibition of photo-induced electron transfer (PET) operative from amino-donor to excited pyrene (b) a conformational translation through spiro-ring opening of rhodamine-B segment, and (c) initiation of Fluorescence Resonance Energy Transfer (FRET) between excited pyrene donor and ring-opened rhodamine acceptor. The ratio of fluorescence from both fluorophores (pyrene and Rhodamine) as output channel displayed sensitive signaling performance (LOD = 13.8 nM) in the detection of PA. The investigation that inferred to the PA-induced selectivity in signalling, higher binding affinity (log K_a≈11), a faster response time, and reversibility in signalling with a counter analyte and an operational pH range established the probe's efficacy as a chemosensor for PA detection.

Ultrasound Irradiation Assisted Synthesis of Luminescent Nano Amide-Functionalized Metal-Organic Frameworks; Application Toward Phenol Derivatives Sensing

Two nano amide-functionalized metal-organic frameworks (MOFs) with molecular formula [Co(oba) (bpta)]·(DMF)₂ TMU-50 and [Co₂(oba)₂ (bpfn)]·(DMF)_2.5 TMU-51 obtained under ultrasonic method without any surfactants. The only difference between the two selected amide functionalized pillar ligands, N,N′-bis(4-pyridinyl)-terephthalamide (bpta), and N,N′-bis-(4-pyridylformamide)-1,5-naphthalenediamine (bpfn), is related to the naphthyl group, which led to the different luminescence properties of the nano frameworks. In this study, the special ability of the luminescent nano MOFs were investigated to sensitize nitroaromatic compounds. Due to its unique and porous framework, Nano TMU-50 shows a good sensitivity towards nitro phenol by strong fluorescence emission with a detection limit of 2 × 10^–3 mM⁻¹. Both nano MOF structures were characterized via many analyses such as powder X-ray diffraction, Field Emission Scanning Electron Microscopy (FE-SEM), elemental analysis, and FTIR spectroscopy. Moreover, the effect of a number of important parameters including initial reagent concentrations, power of ultrasound, time on morphology, and size of nano structures were examined. According to the fluorescence titration results, the activated nano-TMU-50 detected NP selectively with a quick response.

Cationic Metal–Organic Framework-Based Mixed-Matrix Membranes for Fast Sensing and Removal of Cr2O72− Within Water

Considering that metal–organic framework (MOF)-polymer mixed-matrix membranes (MMMs) can overcome the drawbacks of intrinsic fragility and poor processability of pure-MOF membranes, we designed MOF-based MMMs for efficient removal and fast fluorescence sensing of heavily toxic ions within water systems simultaneously. In this work, a series of MOF-based MMMs are prepared by mixing a hydrolytically stable cationic [Eu₇ (mtb)₅(H₂O)₁₆]·NO₃ 8DMA·18H₂O (denoted as Eu-mtb) MOF material into poly (vinylidene fluoride) with high loadings up to 70%. The free volume at the interface between the polymer and Eu-mtb particles, combined with the permanent porosity and uniform distribution of Eu-mtb particles, enables these MMMs to show fast enrichment of Cr₂O₇^2- from solutions and consequently have a full contact between the analyte and MOFs. The developed Eu-mtb MMM (70wt% loading) thus shows both efficient removal and exceptional fluorescence sensing of Cr₂O₇^2- in aqueous media. The overall adsorption capacity of the Eu-mtb MMM (70 wt% loading) for Cr₂O₇^2- reaches up to 33.34 mg/g, which is 3.4 times that of powder-form Eu-mtb. The detection limit of the Eu-mtb MMM (70 wt% loading) for Cr₂O₇^2- is around 5.73 nM, which is lower than that of the reported powder-form Eu-mtb. This work demonstrates that it is feasible to develop flexible luminescent MOF-based MMMs as a significant platform for efficient removal and sensitive sensing of pollutants from water systems simultaneously.

Mechanistic insight into selective adsorption and easy regeneration of carboxyl-functionalized MOFs towards heavy metals

The development of heavy metal adsorbents with high selectivity has become a research hotspot due to the interference of coexisting ions (e.g., Na⁺, Ca²⁺) in the actual wastewater, but the more difficult regeneration caused by high adsorption selectivity severely limits its practical applications. Herein, a carboxyl adsorbent, MIL-121, demonstrated high adsorption selectivity for heavy metals at 10,000 mg/L of Na⁺ (removal > 99% for Cu²⁺) as well as unexpected easy regeneration (desorption > 99%) at low H⁺ concentration (10^-3.5-10^-3.0 M), which is hundreds of times lower than that of ever reported selective adsorbents (> 10^-1 M H⁺). X-ray photoelectron spectrometry (XPS), extended X-ray absorption fine structure (EXAFS) coupled with Density functional theory (DFT) simulation unveil that the -COOH groups in MIL-121 for heavy metals adsorption is specific inner-sphere coordination with higher binding energy (1.31 eV for Cu), and less energy required for regeneration (0.26 eV for H). Similar high selectivity and easy regeneration were also satisfied with other heavy metals (e.g., Pb²⁺, Ni²⁺), and removal of heavy metals remained > 99% in 10 consecutive adsorption-desorption cycles. For actual copper electroplating wastewater treatment, MIL-121 could produce ~ 3600 mL clean water/g sample, outperforming 300 mL that of the benchmark commercial adsorbent D-113. This study shows the potential of MIL-121 for heavy metal wastewater treatment and provides mechanistic insight for developing adsorbents with high selective adsorption and easy regeneration.

A microporous anionic metal–organic framework for aqueous encapsulation and highly reversible sensitization of light-emitting Tb3+ ions

An anionic porous material can serve as both a host and an antenna for protecting and sensitizing extra-framework light-emitting Eu3+/Tb3+ ions. The Tb3+ uptake and release is a reversible process and the cationic Tb3+ can be gradually released.

The Impact of MOF in pH-dependent Drug Delivery System: Progress in Last Decade

Metal-organic frameworks (MOFs) are porous crystalline materials of one-, two-, or three-dimensional networks manufactured from metal ions/clusters and multidentate organic linkers through coordination bonding. MOFs are one of the most...

Construction strategies to modulate the photocatalytic efficiency of Cd(ii) MOFs to photodegrade organic dyes

Two new tuned 3D Cd(ii) MOFs were synthesized and used as photocatalysts for dye degradation.

Efficient photodegradation of dyes by a new 3D Cd(II) MOF with rare fsh topology

Metal–organic frameworks (MOFs) can be regarded as 3D coordination polymers that adopt ordered porous structures and possess abundant active sites, which make them promising photocatalysts for the degradation of organic...

An aggregation-induced emission-active bis-heteroleptic ruthenium(ii) complex of thiophenyl substituted phenanthroline for the selective “turn-off” detection of picric acid

A bis-heteroleptic Ru(ii) polypyridine complex-based AIEgen has been developed for the selective detection of nitroaromatic explosive picric acid in aqueous media.

A new magnetic adsorbent of eggshell-zeolitic imidazolate framework for highly efficient removal of norfloxacin

Many effluents contain various antibiotics commonly, where the simultaneous removal of them is a big challenge. In this study, the magnetic biocomposite (eggshell-zeolitic imidazolate framework) was designed and synthesized by green and facile method. Zeolitic imidazolate framework-8 (ZIF-8) particles were stabilized on the surface of magnetic eggshell (Fe₃O₄-ES), generating a new Fe₃O₄-ES/ZIF-8 adsorbent, which was also fully characterized using FTIR, XRD, SEM and BET techniques. Thereafter, norfloxacin (NOR) adsorption processes were investigated through different influencing factors (dosage, concentration, pH and temperature). The Langmuir adsorption isotherm could confirm a maximum removal efficiency of 80.13% for NOR. Kinetic studies illustrated that the pseudo-first-order model was in line with the experimental data of the simultaneous removal of NOR. Moreover, the magnetic nature of the adsorbent caused an easy separation from the aqueous solution.

Alkali /alkaline earth-based metal-organic frameworks for biomedical applications

With the steady development of metal-organic framework (MOF) materials, this peculiar class of three-dimensional materials has found application prospects in a myriad of areas. The integration of different metals with various categories of ligands engendered a full gamut of frameworks, which of course are supplemented by diversified modification methods. Amongst many metal centers utilized to design and synthesize targeted MOFs, alkali/alkaline earth metal-based MOFs are gaining significant attention because these metal centers can be regarded as human endogenous metals. Numerous studies have shown that alkali/alkaline earth metal MOFs (A/A-E MOFs) tend to have better properties than other metals. This is because A/A-E MOFs offer better biocompatibility, so it is expected to be used in a broader field of biomedicine in the near future. This review mainly introduces the application of A/A-E MOF materials in drug delivery, sensing, and some materials with unique biomedical applications, and elaborates the challenges, obstacles and development of some A/A-E MOF materials in the biomedical field.

Recent advances in Cu(II)/Cu(I)-MOFs based nano-platforms for developing new nano-medicines

With increasing world population, life-span of humans and spread of viruses, myriad of diseases in human beings are becoming more and more common. Because of the interesting chemical and framework versatility and porosity of metal organic frameworks (MOFs) they find application in varied areas viz. catalysis, sensing, metal ion/gas storage, chemical separation, drug delivery, bio-imaging. This subclass of coordination polymers having interesting three-dimensional framework exhibits inordinate potential and hence may find application in treatment and cure of cancer, diabetes Alzheimer's and other diseases. The presented review focuses on the diverse mechanism of action, unique biological activity and advantages of copper-based metal organic framework (MOF) nanomaterials in medicine. Also, different methods used in the treatment of cancer and other diseases have been presented and the applications as well as efficacy of copper MOFs have been reviewed and discussed. Eventually, the current-status and potential of copper based MOFs in the field of anti-inflammatory, anti-bacterial and anti-cancer therapy as well as further investigations going on for this class of MOF-based multifunctional nanostructures in for developing new nano-medicines have been presented.

Series of highly stable Cd(ii)-based MOFs as sensitive and selective sensors for detection of nitrofuran antibiotic

The oxygen atom of the MOF ether-bridging group acts as a Lewis base site, improving the connection and allowing the detection of 10 antibiotics through the fluorescence quenching effect.

Ultrasonic-assisted fabrication of F-MOFs: morphology and types of pillar-dependent sensing performance to phenolic NAC detection

In this study, TMU-44 and TMU-45 synthesized by the sonochemical procedure exhibited very selective response towards the detection of phenolic NACs, particularly TNP.

Biomedical applications of metal–organic framework (MOF)-based nano-enzymes

In the present review, the types and activities of nanometer-sized enzymes are summarized, with recent progress of nanometer-sized enzymes in the field of biomedical detection.

New Cd(ii) coordination polymers bearing Y-shaped tricarboxylate ligands as photocatalysts for dye degradation

Two Cd(ii) coordination polymers derived from a Y-shaped tricarboxylate ligand were synthesized and their photocatalytic properties against decomposition of methylene blue were investigated experimentally and computationally.