Regulable metal-oxo-bridge configurations as electron transfer bridge to promote Cu(II)/Cu(I) redox behavior for efficient peroxymonosulfate activation

Capped Polyoxometalate-Based Metal-Organic Complex with Mixed-Valence CuI/CuII for Synergistic Catalytic Synthesis of p-Benzoquinone

The design and synthesis of efficient and environmentally friendly heterogeneous catalysts for the oxidation of phenols to benzoquinones are of great significance. Considering the highly catalytic activity of mixed-valence metals and polyoxometalates (POMs), a three-dimensional polyoxometalate-based metal-organic complex with mixed-valence CuI/CuII, [Cu2ICu2II(pyca)4(OH)3(PMo12O40Cu2II)(H2O)4]·3.5H2O (1, Hpyca = 2-pyrazinecarboxylic acid) has been successfully synthesized under solvothermal conditions. Surprisingly, complex 1 not only combines the desired mixed-valent CuI/CuII and POM sites but also contains a rare double Cu-capped POM structure. Due to the ternary synergistic effect of CuI, CuII, and POM, complex 1 exhibits excellent catalytic activity in the oxidation reaction of 2,3,6-trimethylphenol to the corresponding p-benzoquinone. The conversion and selectivity can reach 98 and 99% within 5 min, respectively, and the turnover frequency (TOF) value is as high as 8167 h-1, which is superior to most catalysts.

Antibiotic removal from synthetic and real aqueous matrices by peroxymonosulfate-based advanced oxidation processes. A review of recent development

The widespread use of antibiotics for the treatment of bacteriological diseases causes their accumulation at low concentrations in natural waters. This gives health risks to animals and humans since it can increase the damage of the beneficial bacteria, the control of infectious diseases, and the resistance to bacterial infection. Potent oxidation methods are required to remove these pollutants from water because of their inefficient abatement in municipal wastewater treatment plants. Over the last three years in the period 2021-September 2023, powerful peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs) have been developed to guaranty the effective removal of antibiotics in synthetic and real waters and wastewater. This review presents a comprehensive analysis of the different procedures proposed to activate PMS-producing strong oxidizing agents like sulfate radical (SO4•-), hydroxyl radical (•OH, radical superoxide ion (O2•-), and non-radical singlet oxygen (1O2) at different proportions depending on the experimental conditions. Iron, non-iron transition metals, biochar, and carbonaceous materials catalytic, UVC, photocatalytic, thermal, electrochemical, and other processes for PMS activation are summarized. The fundamentals and characteristics of these procedures are detailed remarking on their oxidation power to remove antibiotics, the influence of operating variables, the production and detection of radical and non-radical oxidizing agents, the effect of added inorganic anions, natural organic matter, and aqueous matrix, and the identification of by-products formed. Finally, the theoretical and experimental analysis of the change of solution toxicity during the PMS-based AOPs are described.

Highly effective degradation of ibuprofen by alkaline metal-doped copper oxides via peroxymonosulfate activation: Mechanisms, degradation pathway and toxicity assessments

Redox ratios of Cu2+/Cu+ and adsorbed oxygen species (Oads) have shown great activity toward radical generation by activating peroxymonosulfate (PMS). Herein, different alkaline metal oxides (CaO, MgO and BaO) and various amounts of CaO are incorporated into CuO, which could tune the main active sites of redox ratios of Cu2+/Cu+ and Oads. The results show that CaO-CuO-5% exhibits the outstanding performance of PMS activation toward ibuprofen (IBF) degradation with excellent kinetics (k = 0.812 min-1). The X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculation show that the CaO-CuO-5% has the higher electron density with superior electron transfer ability and lower PMS adsorption energy. Based on radical scavengers and electron paramagnetic resonance spectrometer (EPR), a nonradical process is proposed to play the dominant role. The degradation pathway and the corresponding toxicity of degraded intermediates with residue PMS after reaction is evaluated by LC-MS/MS and bioassay experiments, indicating the lower antagonistic influence on human hormone receptors after advanced oxidation process. Mitigation of the Cu leaching with cyclic stability can be achieved. This study provides a facile method to optimize high-performance catalysts to activate PMS and offer practical environmental applications in the remediation of emerging contaminants.

Cuprous-mediated peroxymonosulfate activation for Fenton-like removal of micropollutants: The function of co-catalyst and the accelerated degradation mechanism

Introducing co-catalysts to enhance the activation of cuprous-mediated peroxymonosulfate (PMS) and induce the continuous generation of highly reactive oxygen species is promising. The function, effectiveness, and acceleration mechanism of co-catalysts in the cuprous-mediated PMS activation process were fully explored in this work, which focused on rhodamine B as the target contaminants. The results demonstrated that molybdenum (Mo) powder was a superb co-catalyst, and that the reaction of cuprous-mediated PMS system was carried out by surface Mo species as opposed to Mo ions in the solution. The Cu (II)/Cu(I) cycle was primarily encouraged by the Mo0, which also caused abundant ·HO and 1O2 and minimal SO4·- and ·O2- to be produced from PMS. The Mo/Cu2+/PMS system exhibited high removal efficiency towards typical pollutants, especially ciprofloxacin, methyl orange, malachite green, and crystal violet, with removal rates up to 93%, 99%, 97%, and 92%, respectively. Additionally, this system showed excellent adaptability to complex water environments. After four cycles, the Mo powder retained its properties and morphology, and the target pollutants could still maintain an 82% degradation efficiency. This study provides a basis for enhancing cuprous-mediated PMS activation for wastewater treatment.

Manganese-mediated ammonium removal by a bacterial consortium from wastewater: Experimental proof and biochemical mechanisms

Manganese-redox-mediated nitrogen transformation is promising for ammonium wastewater treatment. However, due to the limited contact between insoluble Mn and the microbe, extracellular electron transfer (EET) inefficiencies become a technical bottleneck in the technical practical application. To overcome this obstacle, humic acid (HA) was introduced to synthesize manganese-humic acid complex (Mn-HA) to increase Mn solubility. The TIN (Total Inorganic Nitrogen) removal rate constant k was 3.18, 1.08, 3.56, 1.13 and 1.05 times higher than CK (Control group) at 10, 15, 20, 40 and 60 mg/L influent nitrate in the MH group, respectively. Mn-HA was inferred to stimulated the nitrogen removal by providing more reaction active sites, bridging Mn-O bonds to transfer electrons and playing a redox role in the respiratory chain. A Mnammox-NDMO (manganese oxide reduction-coupled ammonium oxidation - nitrate/nitrite- dependent manganese oxidation) bacteria consortium was enriched in MH group, containing Mnammox bacteria Geothrix, Geobacter and NDMO bacteria Pseudomonas and Bacillus.

Enhanced plasmonic photocatalytic performance of C3N4/Cu by the introduction of a reduced graphene oxide interlayer

Cu nanoparticles (NPs) are low-cost surface plasmonic resonance (SPR) metal nanostructures, and their SPR properties can be used to enhance the photocatalytic hydrogen evolution performance of carbon nitride (C₃N₄). But their actual performance is usually limited, and one key factor is their poor interfacial quality. In this work, a highly conductive reduced graphene oxide (RGO) interlayer is introduced between protonated C₃N₄ (PCN) nanosheets and Cu NPs, which can act as an efficient sink for photogenerated electrons from C₃N₄ and hot electrons from Cu NPs, and simultaneously serve as reaction sites for the hydrogen evolution reaction, and accelerate the charge transport by the formed C-O-C and C-O-Cu bonds. The optimal hydrogen evolution rate of the optimized PCN/RGO/Cu is 1.30 mmol g^-1 h^-1, which is 6.76, 2.47 and 2.41 times that of PCN, PCN/RGO and PCN/Cu, respectively, and it can further reach up to 13.22 mmol g^-1 h^-1 by loading moderate Pt NPs. Meanwhile, the introduced RGO can effectively anchor Cu NPs to enhance the stability of the photocatalyst. In addition, due to the broad SPR response of Cu NPs, a near-infrared photocatalytic performance is realized for PCN/RGO/Cu with an apparent quantum efficiency of 0.46% at 765 nm.

Electron-transfer pathways insights into contaminants oxidized by Cu-OOSO3- intermediate: Effects of oxidation states of Cu and solution pH values

The copper-peroxy complex (Cu-OOSO₃^-) metastable intermediate has been confirmed to oxidize contaminants via a single-electron-transfer pathway or an oxygen-atom-transfer pathway. And the effects of Cu oxidation states and reaction pH conditions on the intermediate properties have not been explored in depth. Here, copper oxide (CuO_x) catalysts with different Cu oxidation states were synthesized by a simple precipitation method by controlling the reaction temperature from 0 to 45 °C. CuO_x displayed a strong catalytic dependence on the Cu oxidation state, and CuO_x-30 with Cu average valence on the catalyst surface of 1.61 was more reactive for catalytic degradation of bisphenol A with peroxymonosulfate (PMS). Notably, CuO_x-30, with the best electron-accepting ability, was easier to bonding with PMS to form the Cu-OOSO₃^- reactive complex, and the generated intermediate exhibited the strongest capacity to obtain electrons from contaminants. Moreover, the electron-transfer pathways were closely related to the average valence of Cu, and the contribution of the oxygen-atom-transfer pathway changed volcanic with increasing Cu valence. Meanwhile, the reaction predominantly involved the oxygen-atom-transfer pathway under acidic conditions (pH=3), while the contribution of the single-electron-transfer pathway raised with increasing pH values. Hence, this work was devoted to providing new insights into the CuO_x-inducing PMS activation and vital supplementary to the properties of the Cu-OOSO₃^- intermediate.

Insight into radical-nonradical coupling activation pathways of peroxymonosulfate by CuxO for antibiotics degradation

In this work, a heterogeneous catalyst of Cu_xO was rationally designed by using Cu-based metal organic frameworks (marked Cu-BDC) as the template, and was used to degrade tetracycline (TC) via activation of peroxymonosulfate (PMS). The optimal Cu_xO-350 showed excellent catalytic efficiency for TC degradation, and the reaction rate constant (0.104 min^-1) was 8 times higher than that (0.013 min^-1) of raw Cu-BDC. The characterization observations confirmed that Cu_xO-350 possessed multiple valence states (CuO and Cu₂O) and oxygen vacancies (O_v), both of which were favorable for the activation of PMS, resulting in promoting the generation of active species in the Cu_xO-350 + PMS system. Different from the free radical pathway in Cu-BDC + PMS system, a radical-nonradical coupling process was detected in the Cu_xO-350 + PMS system, which was confirmed by quenching experiments and EPR measurements. Moreover, the toxicity prediction showed that the toxicity of degradation intermediates declined compared with TC. This work not only opened up a new strategy for the rational design and preparation of high-efficient catalysts by employing metal organic frameworks precursors, but also offered an insight into the reaction mechanism of PMS activation through a radical-nonradical coupling process catalyzed by Cu_xO-350 derived from Cu-BDC.

Copper oxides activate peroxymonosulfate for degradation of methylene blue via radical and nonradical pathways: surface structure and mechanism

A one-step hydrothermal method for preparation of copper oxides with different valences using ascorbic acid as a reducing reagent was developed for environmental remediation. The results suggested that the notable degradation performance of CuO₀ may be attributable to the abundant active sites, such as Cu or Cu-O, and was not significantly related to the Cu valence state. In contrast to direct degradation of pollutants by traditional superoxide radicals (O₂^•-), O₂^•- played an important role in the reduction of high-valence Cu ions (Cu(III)). In addition, a series of radical quenching, electron paramagnetic resonance (EPR), and electrochemical experiments validated the existence of direct electron transfer between methylene blue (MB) and PMS mediated by CuO₀ and surface-bound radicals. The results suggested that the CuO₀/PMS system may be less susceptible to diverse ions and natural organic matter other than dihydrogen phosphate anions. The mechanism of MB degradation under alkaline conditions was different from that under acidic conditions in that it was not reliant on radicals or charge transfer but direct oxidation by PMS. This study provides new insights into the heterogeneous processes involved in PMS activation by the copper oxides. Furthermore, this paper devotes to providing theoretical basis on pollutant removal via PMS activated by copper oxides and developing low-cost and high-efficiency catalysts.