Pd-Cu nanospheres supported on Mo2C for the electrochemical sensing of nitrites

Methylene blue-assisted molecularly-imprinted film modified nitrogen and sulfur co-doped molybdenum carbide for simultaneous electrochemical determination of two hepatotoxic drugs

A novel electrochemical sensor with a dual-template molecular imprinting technology was fabricated for the simultaneous detection of paracetamol (PAR) and isoniazid (INZ). The sensor was constructed using nitrogen and sulfur co-doped molybdenum carbide (N, S@Mo2C) and a thin layer of electro-polymerized methylene blue was applied onto the surface of the N, S@Mo2C. The electrochemical sensor demonstrated remarkable analytical efficiency for the concurrent PAR and INZ quantification under optimal circumstances. The system achieved an exceptionally low limit of detection (S/N = 3) of  3.7 nM for PAR, with a concentration range  of  0.013 and 140 µM.  A LOD of 7.6 nM was attained for INZ, with a linear range  between 0.025 and 140 µM. Furthermore, the platform's selectivity was evaluated using differential pulse voltammetry  (DPV). The designed platform successfully detected PAR and INZ in authentic samples with recoveries varying between 98.3% and 104.9%. The relative standard deviations (RSD) for these measurements ranged from 2.7 to 4.0%, demonstrating that the proposed sensor is extremely stable, repeatable, and reproducible. These promising results suggest that the sensor holds potential for the detection of various (bio) molecules, paving the way for future applications in sensing fields.

Flower-like 3D MoS2 microsphere/2D C3N4 nanosheet composite for highly sensitive electrochemical sensing of nitrite

Nitrite pollution poses a serious threat to human health and the environment. In this study, a reliable and selective electrochemical (EC) sensor was developed for the quantitative determination of nitrite by combining flower-like three-dimensional (3D) MoS2 microspheres with two-dimensional (2D) C3N4 nanosheets. Benefiting from the synergistic effects of MoS2 and C3N4, the 3D MoS2/2D C3N4 nanocomposite displayed numerous active sites, a 3D mesoporous structure, high conductivity and excellent catalytic activity. The 3D MoS2/2D C3N4-modified glassy carbon electrode (GCE) exhibited a superior electrocatalytic activity toward nitrite oxidation, with a wider linear detection range (0.1-1100 μM), a lower detection limit (LOD) (0.065 μM, S/N = 3), outstanding stability, remarkable reproducibility and strong selectivity. Furthermore, the nitrite EC sensor was successfully applied to detect actual food and environmental samples involving sausage, pickled vegetables, river water and tap water, thus demonstrating the potential of the prepared 3D MoS2/2D C3N4/GCE for food analysis and environmental monitoring.

Interactions between CuO NPs and PS: The release of copper ions and oxidative damage

Copper oxide nanoparticles (CuO NPs) can adversely affect lung health possibly by inducing oxidative damage through the release of copper ions. However, the migration and transformation processes of CuO NPs in lung lining fluid is still unclear, and there are still conflicting reports of redox reactions involving copper ions. To address this, we examined the release of copper ions from CuO NPs in simulated lung fluid supplemented with pulmonary surfactant (PS), and further analyzed the mechanisms of PS-CuO NPs interactions and the health hazards. The results showed that the phospholipid of PS was adsorbed on the particle surface, which not only induced aggregation of the particles but also provided a reaction environment for the interaction of PS with CuO NPs. PS was able to promote the release of ions from CuO NPs, of which the protein was a key component. Lipid peroxidation, protein destabilization, and disruption of the interfacial chemistry also occurred in the PS-CuO NPs interactions, during which copper ions were present only as divalent cations. Meanwhile, the contribution of the particle surface cannot be neglected in the oxidative damage to the lung caused by CuO NPs. Through reacting with biomolecules, CuO NPs accomplished ion release and induced oxidative damage associated with PS. This research was the first to reveal the mechanism of CuO NPs releasing copper ions and inducing lipid oxidative damage in the presence of PS, which provides a new idea of transition metal-induced health risk in human body.

A novel electrochemical sensing platform based on double-active-center polyimide covalent organic frameworks for sensitive analysis of levofloxacin

The development of a simple and sensitive electrochemical sensing platform for levofloxacin (LVF) analysis is of great significance to human health. In this work, a covalent organic framework (TP-COF) was in situ grown on the surface of Sn-MoC nanospheres with nanoflower-like morphology through a one-pot method to obtain the TP-COF@Sn-MoC composite. The prepared composite was used to modify a glassy carbon electrode (GCE) to realize the sensitive detection of levofloxacin. TP-COF was formed by polycondensation of 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) and pyromellitic dianhydride (PMDA), in which C = O and C = N groups served as double active centers for the recognition and electrocatalytic oxidation of the target molecule. Meanwhile, the introduction of Sn-MoC improved the conductivity of the electrode. The TP-COF@Sn-MoC composite produced a strong synergistic effect and showed a high electrocatalytic ability toward levofloxacin oxidation. The linear range of LVF was 0.6-1000 μM and the limit of detection (LOD) was 0.029 μM (S/N = 3). In addition, the sensor has been successfully applied for the analysis of LVF in human urine and blood serum samples with acceptable recovery rates, demonstrating that the sensor was promising in practical applications.

Sn/MoC@NC hollow nanospheres as Schottky catalyst for highly sensitive electrochemical detection of methyl parathion

Developing electrode materials with excellent electrocatalytic properties for detecting pesticide residues plays a vital role in the safety of agricultural products and environmental applications. Herein, we designed a new electrochemical sensor on the basis of N-doped carbon hollow nanospheres modified with Sn/MoC Schottky junction (Sn/MoC@NC) for methyl parathion (MP) detection. The Sn/MoC@NC was prepared by self-assembled polymerization-anchoring strategy and high-temperature carbonization design. Sn/MoC Schottky junction and hollow nanosphere structure endow Sn/MoC@NC with a larger surface area, more active sites, and faster electron transfer, which is beneficial to enhancing its electrocatalytic performance. The structural characterizations and physicochemical properties of Sn/MoC@NC were explored through various microscopy, spectroscopic and electrochemical techniques. The experimental results confirmed that the calibration curve for current and MP concentration (0.05-10 μg/mL) was available under optimized conditions, and the sensitivity and detection limit were respectively determined to be 9.02 μA μM¹ cm² and 8.9 ng/mL. Furthermore, the constructed sensor displayed excellent selectivity, repeatability, and stability, which qualified it for use in detecting MP in grapes and tap water with satisfactory recovery. This work may provide some interesting prospects for constructing high-performance electrocatalysts for MP detection.

Towards Embedded Electrochemical Sensors for On-Site Nitrite Detection by Gold Nanoparticles Modified Screen Printed Carbon Electrodes

The transition of electrochemical sensors from lab-based measurements to real-time analysis requires special attention to different aspects in addition to the classical development of new sensing materials. Several critical challenges need to be addressed including a reproducible fabrication procedure, stability, lifetime, and development of cost-effective sensor electronics. In this paper, we address these aspects exemplarily for a nitrite sensor. An electrochemical sensor has been developed using one-step electrodeposited (Ed) gold nanoparticles (EdAu) for the detection of nitrite in water, which shows a low limit of detection of 0.38 µM and excellent analytical capabilities in groundwater. Experimental investigations with 10 realized sensors show a very high reproducibility enabling mass production. A comprehensive investigation of the sensor drift by calendar and cyclic aging was carried out for 160 cycles to assess the stability of the electrodes. Electrochemical impedance spectroscopy (EIS) shows significant changes with increasing aging inferring the deterioration of the electrode surface. To enable on-site measurements outside the laboratory, a compact and cost-effective wireless potentiostat combining cyclic and square wave voltammetry, and EIS capabilities has been designed and validated. The implemented methodology in this study builds a basis for the development of further on-site distributed electrochemical sensor networks.

Synthesis of perovskite-type potassium niobate using deep eutectic solvents: A promising electrode material for detection of bisphenol A

This study demonstrates a hydrothermal method to prepare perovskite-type potassium niobate (KNbO₃) through deep eutectic solvent (DES), which is further used as an electrode material for the determination of bisphenol A (BPA). The as-synthesized KNbO₃ was systematically characterized by different microscopic and spectroscopic techniques. The KNbO₃-modified electrode demonstrates excellent electrocatalytic activity for BPA compared to the pristine electrode. The enhanced performance of the proposed sensor is attributed to the numerous active sites, large electrochemical surface area, high electrical conductivity, and rapid electron transfer. The fabricated sensor shows a wide detection range (0.01-84.3 μM), a low limit of detection (0.003 μM), a high sensitivity (0.51 μA μM^-1 cm^-2), and good anti-interference abilities towards the BPA detection by linear sweep voltammetry method. Besides, it was successfully applied to determining BPA in food samples, demonstrating good practicability. This design paves a new way to fabricate efficient electrode material for various electrochemical applications using a DES medium.

Rationally Constructed De Novo Fluorescent Nanosensor for Nitric Oxide Detection and Imaging in Living Cells and Inflammatory Mice Models

For the early diagnosis and effective evaluation of treatment effects of inflammation, a de novo bioanalytical method is urgently needed to monitor the metabolite nitric oxide (NO) associated with inflammatory diseases. However, developing a reliable detection method with excellent water solubility, biocompatibility, long retention time, and blood circulation is still challenging. In this work, we reported for the first time a de novo host-guest self-assembled nanosensor CTA for the quantitative detection and visualization of NO levels in inflammatory models. CTA mainly consists of two parts: (i) an adamantyl-labeled guest small-molecule RN-adH containing a classical response moiety o-phenylenediamine for a chemical-specific response toward NO and fluorophore rhodamine B with excellent optical properties as an internal reference for self-calibration and (ii) a remarkable water-soluble and biocompatible supramolecular β-cyclodextrin polymer (Poly-β-CD) host. In the presence of NO, the o-phenylenediamine unit was reacted with NO at a low pH value of ∼7.0, accompanied by changes in the intensity of the two emission peaks corrected for each other and the change in fluorescence color of the CTA solution from fuchsia to pink. Furthermore, CTA was an effective tool for NO detection with a fast response time (∼60 s), high selectivity, and sensitivity (LOD: 22.3 nM). Impressively, the CTA nanosensor has successfully achieved the targeted imaging of NO in living inflammatory RAW 264.7 cells and mice models with satisfactory results, which can provide a powerful molecular tool for the visualization and assessment of the occurrence and development of NO-related inflammatory diseases in complex biosystems.

MXene-reinforced octahedral PtCu nanocages with boosted electrocatalytic performance towards endocrine disrupting pollutants sensing

Rational tailoring of hollow and porous bimetallic structures with excellent electrocatalytic performance is appealing yet challenging. Further, combining independent bimetallic nanoparticles with flexible two-dimensional substrate by forming stable heterocomplex is still highly desired for electrocatalysis. Herein, hierarchical PtCu alloy octahedrons with hollow interiors and nanosheet-assembled nanoshells were synthesized by a facile and efficient chemical transformation strategy using Cu₂O as sacrificial templates. Such octahedral PtCu nanocages displayed significantly enhanced electrocatalytic activity owing to their unique hollow and porous architectures which provided easy access for analytes to the catalyst surface. Thereafter, introduction of Ti₃C₂T_x MXene was realized via simple incubation of Ti₃C₂T_x in solution containing the 3-aminopropyltriethoxysilane-capped PtCu, and their electrostatic interaction guaranteed the firm adsorption of PtCu nanocages on Ti₃C₂T_x nanosheets. It turned out that the sensitivity of the hybrid sensor was remarkably improved for electrochemical monitoring of endocrine disrupting pollutants in water, exhibiting ultrawide linear ranges and sub-nanomole detection limits. The eminent electrode performance is attributed to the high specific area, fast electrochemical kinetics, decent electrical catalytic ability, and the synergistic effect between Pt, Cu, and MXene.

Gold Nanoclusters Dispersed on Gold Dendrite-Based Carbon Fibre Microelectrodes for the Sensitive Detection of Nitric Oxide in Human Serum

Herein, gold nanoclusters (Au NC) dispersed on gold dendrite (Au DS)-based flexible carbon fibre (AuNC@AuDS|CF) microelectrodes are developed using a one-step electrochemical approach. The as-fabricated AuNC@AuDS|CF microelectrodes work as the prospective electrode materials for the sensitive detection of nitric oxide (NO) in a 0.1 M phosphate buffer (PB) solution. Carbon microfibre acts as an efficient matrix for the direct growth of AuNC@AuDS without any binder/extra reductant. The AuNC@AuDS|CF microelectrodes exhibit outstanding electrocatalytic activity towards NO oxidation, which is ascribed to their large electrochemical active surface area (ECSA), high electrical conductivity, and high dispersion of Au nanoclusters. As a result, the AuNC@AuDS|CF microelectrodes attain a rapid response time (3 s), a low limit of detection (LOD) (0.11 nM), high sensitivity (66.32 µA µM cm^-2), a wide linear range (2 nM-7.7 µM), long-term stability, good reproducibility, and a strong anti-interference capability. Moreover, the present microsensor successfully tested for the discriminating detection of NO in real human serum samples, revealing its potential practicability.

Binary organic-inorganic nanocomposite of polyaniline-MnO2 for non-enzymatic electrochemical detection of environmental pollutant nitrite

Due to wide usage as nitrogen fertilizer in agriculture and food additive in industry, nitrite, as one of inorganic environmental pollutants, could cause detrimental effects to the ecological environment. Therefore, accurate, sensitive and rapid detection of nitrite is necessary. In this work, binary hybrid polyaniline-MnO₂ organic-inorganic nanocomposite is prepared chemically and characterized via X-ray diffraction spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Polyaniline-MnO₂ organic-inorganic nanocomposite serves as excellent electrode modifier for electrochemical sensing of nitrite by two modes of cyclic voltammetry and chronoamperometry, achieving broad linear ranges and low limits of detection for both methods. Moreover, the organic-inorganic nanocomposite displays satisfactory sensing performance in real water sample analysis. Amine and imino groups of polyaniline contribute to the better adsorption behavior of nitrite onto the nanocomposite, which improves the nanocomposite's sensing performance. In summary, the synergistic effects between polyaniline and MnO₂ is taken advantaged in the nanocomposite for effective electrochemical sensor development.

Doped Carbon Quantum Dots/PVA Nanocomposite as a Platform to Sense Nitrite Ions in Meat

A sensor device based on doped-carbon quantum dots is proposed herein for detection of nitrite in meat products by fluorescence quenching. For the sensing platform, carbon quantum dots doped with boron and functionalized with nitrogen (B,N-Cdot) were synthesized with an excellent 44.3% quantum yield via a one-step hydrothermal route using citric acid, boric acid, and branched polyethylenimine as carbon, boron, and nitrogen sources, respectively. After investigation of their chemical structure and fluorescent properties, the B,N-Cdot at aqueous suspensions showed high selectivity for NO₂^- in a linear range from 20 to 50 mmol L^-1 under optimum conditions at pH 7.4 and a 340 nm excitation. Furthermore, the prepared B,N-Cdots successfully detected NO₂^- in a real meat sample with recovery of 91.4-104% within the analyzed range. In this manner, a B,N-Cdot/PVA nanocomposite film with blue emission under excitation at 360 nm was prepared, and a first assay detection of NO₂^- in meat products was tested using a smartphone application. The potential application of the newly developed sensing device containing a highly fluorescent probe should aid in the development of a rapid and inexpensive strategy for NO₂^- detection.

Nickel and iron-based metal-organic frameworks for removal of organic and inorganic model contaminants

Metal-organic frameworks (MOFs) are a promising class of porous nanomaterials in the field of environmental remediation. Ni-MOF and Fe-MOF were chosen for their advantages such as structural robustness and ease of synthesis route. The structure of prepared MOFs was characterized using FE-SEM, XRD, FTIR, and N₂ adsorption-desorption. The efficiency of MOFs to remove organic model contaminants (anionic Alizarin Red S (ARS) and cationic malachite green (MG) and inorganic fluoride was studied. Fe-MOF and Ni-MOF adsorbed 67, 88, 6% and 32, 5, and 9% of fluoride, ARS, and MG, respectively. Further study on ARS adsorption by Fe-MOF showed that the removal efficiency was high in a wide range of pH from 3 to 9. Moreover, dye removal was directly increased by adsorbent mass (0.1-0.75 g/L) and decreased by ARS concentration (25-100 mg/L). The pseudo-first-order kinetic model and Langmuir isotherm model with a q_max of 176.68 mg/g described the experimental data well. The separation factor, K_L, was in the range of 0-1, which means the adsorption process was favorable. In conclusion, Fe-MOF showed remarkable adsorption of organic and inorganic model contaminants.

Lanthanide Molecular Species Generated Fe3O4@SiO2-TbDPA Nanosphere for the Efficient Determination of Nitrite

The presence of nitrite (NO₂⁻) in water and food leads to serious problems in public health and the environment. Therefore, it is important to develop a rapid and efficient method for the selective detection of NO₂⁻. In this work, the synthesis and characterization of magnetic Fe₃O₄@SiO₂-TbDPA nanoprobe have been carried out. The Fe₃O₄@SiO₂-TbDPA aqueous solution exhibits a strong green emission. Due to the addition of various concentrations of NO₂⁻ (0–100 μM), the fluorescence intensity has been suppressed. The nanoprobe Fe₃O₄@SiO₂-TbDPA exhibits excellent selectivity and sensitivity toward NO₂⁻ ions. Excellent linearity is obtained in the range of 5–80 μM with a detection limit of 1.03 μM. Furthermore, the presence of magnetic Fe₃O₄ nanoparticles in Fe₃O₄@SiO₂-TbDPA nanospheres will also facilitate the effective separation of Fe₃O₄@SiO₂-TbDPA from the aqueous solution. Our proposed strategy is expected to fabricate an organic-inorganic hybrid magnetic nanomaterial and can be used as an efficient sensor. It has been shown that this new strategy has numerous advantages, such as high stability, selectivity, and simplicity of operation. It demonstrates great potential for simple and convenient NO₂⁻ detection. It may expand to a variety of ranges in environmental monitoring and biomedical fields.

An integrated nanoflower-like MoS2@CuCo2O4 heterostructure for boosting electrochemical glucose sensing in beverage

Excessive glucose in food poses a non-negligible threat to its inherent quality and human health, which makes it imperative to develop a highly sensitive sensor for real-time glucose detection. In this work, an integrated electrochemical glucose sensor based on a nanoflower-like MoS₂@CuCo₂O₄ heterostructure was carefully constructed. Under optimal conditions, the as-fabricated sensor exhibited a high sensitivity of 1,303 μA mM^-1 cm^-2 over a wide range of 0.5-393.0 μmol/L, accompanied by a low determination limit (0.5 μmol/L) and short response time (2.1 s). The favorable sensing performance of the MoS₂@CuCo₂O₄ nanocomposite-modified electrode in electrochemical analyses was attributed to the introduction of unique nanoflower-like heterostructure and the synergistic effects between MoS₂ and CuCo₂O₄. Furthermore, the satisfactory applicability of this sensor in beverages was confirmed. These results demonstrate that the MoS₂@CuCo₂O₄/GCE may be a promising platform for sensitive monitoring of glucose content in food samples.

Polymeric Electrochemical Sensor for Calcium Based on DNA

Plastic membranes containing deoxyribonucleic acid (DNA) as an electroactive material were acting as Ca²⁺ selective sensors. Diethyl phthalate (DEP), dioctyl Phthalate (DOP), or nitrophenyl octyl ether (NPOE) were used as plasticizers and polyvinyl chloride (PVC) was the membrane matrix. A sensor with a membrane composition of 120 mg PVC, 60 mg DOP plasticizer, and 2 mg DNA ionophore (DNA: DOP: PVC, 1.0:29.2:0.1 mole) was found to have the best performance. The slope of the calibration graph was 30 mV decade⁻¹. The optimum pH range was 5.7–9.5 for 0.01 M Ca²⁺. The sensor response time was fast (2–3 s) with a long working period (up to 3 weeks). Excellent selectivity for Ca²⁺ was indicated by the values of selectivity coefficients for different selected interference. The sensor was used effectively for the estimation of calcium in real samples (fruits, calcium syrup, milk, and dairy products).

Microwave-assisted green synthesis of multi-functional carbon quantum dots as efficient fluorescence sensor for ultra-trace level monitoring of ammonia in environmental water

This study reports a facile green preparation of self-assembled multi-functional carbon quantum dots (CQDs) via direct pyrolysis technique coupled with microwave-assisted synthesis using Ziziphus Mauritiana stone biomass (as a bio-resource precursor). The synthesized multi-functional CQDs was characterized using FT-IR, XRD, XPS, TEM, and fluorescence spectroscopy techniques. The results exhibit that the prepared CQDs are spherical-shaped with an average diameter of 2-4 nm and showed bright bluish-green emissions property with stable dispersion and high photostability in the aqueous medium. Furthermore, the emission properties of CQDs were examined by quenched with ammonia (NH₃) and other molecules in aqueous media. Results indicated that the developed CQDs showed effective fluorescent for the selective and sensitive detection (sensor) of NH₃ with a detection limit of 10 nM. Thus, the presented procedure is a simple, low-cost, efficient, chemical-free synthesis of CQDs and can be applied as selective and sensitive (sensor) monitoring of NH₃ concentration in aquatic environmental samples.

Sensitive analytical detection of nitrite using an electrochemical sensor with STAB-functionalized Nb2C@MWCNTs for signal amplification

An electrochemical sensor based on stearyl trimethyl ammonium bromide - functionalized niobium carbide@multi-walled carbon nanotubes (Nb₂C@MWCNTs-STAB) for signal amplification was successfully constructed for sensitive detection of nitrite (NO₂^-). Niobium carbide@multi-walled carbon nanotubes (Nb₂C@MWCNTs) with high electrical conductivity and water dispersibility were first prepared in a one-pot hydrothermal synthesis, after which cationic STAB was added to overcome the negative surface charge on the Nb₂C@MWCNTs. The electrostatic attraction between Nb₂C@MWCNTs-STAB and NO₂^- was improved by the STAB, which enhanced the sensitivity of the constructed sensor for NO₂^-. Under optimized conditions, Nb₂C@MWCNTs-STAB/GCE exhibited excellent analytical performance for detection NO₂^- with two wide liner ranges (0.1-100 μmol L^-1 and 100-2000 μmol L^-1) and a limit of detection of 0.022 μmol L^-1. Nitrite recovery tests in milk and spinach samples showed recoveries in the range of 89.82-104.52%. The NO₂^- residues in ham and pickled vegetable (cedrela sinensis) samples were analysed using the presented sensor and a spectrophotometric method, with no significant difference found between the results of the two methods.

Fabrication of rGO/MXene-Pd/rGO hierarchical framework as high-performance electrochemical sensing platform for luteolin detection

A  nanocomposite of rGO/MXene-Pd/rGO with hierarchical structure based on Ti3C2Tx MXene, Pd nanoparticles, and reduced graphene oxide (rGO) was synthesized by a green approach. Ti3C2Tx MXene decorated with Pd nanoparticles (MXene-Pd) was prepared first. Then, graphene oxide (GO), MXene-Pd, and GO were coated on the surface of the glassy carbon electrode (GCE) in sequence. After each coating of the GO layer, the GO nanosheets were reduced to rGO electrochemically. The fabricated rGO/MXene-Pd/rGO hierarchical framework performs a pie structure with MXene-Pd as the stuffing and rGO nanosheets as the crust, which will be beneficial to the enhancement of its electrochemical sensing performance. As compared with other electrodes, the rGO/MXene-Pd/rGO/GCE exhibited higher electrocatalytic activity and better sensing performance for luteolin detection, with a wide linear range of 6.0 × 10-10 to 8 × 10-7 M and 1.0 × 10-6 to 1.0 × 10-5 M (oxidation peak potential Epa = 0.34 V vs. SCE), a low detection limit of 2.0 × 10-10 M, and a high sensitivity of 112.72 µA µM-1 cm-2. Moreover, the fabricated sensor also showed high selectivity, reproducibility, and repeatability toward the detection of luteolin. The real sample analysis for luteolin in honeysuckle was successfully carried out by rGO/MXene-Pd/rGO and verified with high-performance liquid chromatography (HPLC) analysis techniques with acceptable results. All the above tests indicate the promising application prospect of the rGO/MXene-Pd/rGO framework for luteolin detection in honeysuckle and other herbs containing luteolin.

Catalytic oxidation and deionization of nitrite and nitrate ions using mesoporous carbon-supported nano-flaky cobalt and nickel oxyhydroxides

The composite electrode of NiCo oxide supported by porous carbon was synthesized for nitrite oxidation and nitrate electro-sorption. The crystal structure and chemical state of the Co and Ni oxyhydroxides which were precipitated on loofah-derived activated carbon (AC) using hypochlorite were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and BET surface area. The voltammetry showed that the redox couple of Co(II)/Co(III) and Ni(II)/Ni(III) as the mediator catalytically transferred the electrons of NO₂^-/NO₃^-; the Ni site had a relatively high transfer coefficient and diffusive current, while the Co site was better in the capacitive removal of the nitrite and nitrate compounds. A batch electrolysis of nitrite ions was operated under constant anodic potential mode (0 to + 1.5 V vs. Ag/AgCl) to assess the performance of the composite electrodes. The adsorption capacity of NiCo/AC (Ni = 5% and Co = 5% on AC by weight) was 23.5 mg-N g^-1, which was twice that of AC substrate (7.5 mg-N g^-1), based on a multilayer adsorption model. The steady-state kinetics of the consecutive reaction were derived to determine the rate steps of the electrochemical oxidation of NO₂^- and adsorption of NO₃^-.