Enhanced ammonia adsorption and separation by a molecularly imprinted polymer after acid hydrolysis of its ester crosslinker

Remarkable N2 selectivity enhancement of NH3-SCO reactions over V0.5/Pt0.04/TiO2 catalyst through Cu-Er co-modification

Pt-V bimetallic catalysts maybe promising substitutes to precious metal catalysts for selective catalytic oxidation (SCO) of NH3. But it remains a major challenge for Pt-V bimetallic catalysts to pursue high NH3 conversion rate and N2 selectivity simultaneously. In this work, both Cu and Er were adopted to modify V0.5/Pt0.04/TiO2 catalyst (denoted as V/PT), and the influences of Cu and Er doping amounts on NH3-SCO performance of V/PT catalysts were investigated systematically. The results indicated that the co-modification of Cu and Er imposed little influence on NH3 conversion efficiency, but significantly boosted N2 selectivity. Compared with other Cu-Er-modified V/PT catalysts, CEV/PT-4 catalyst exhibited outstanding NH3-SCO performance, which attained completely 100% NH3 conversion efficiency and > 90% N2 selectivity in the temperature range of 225-450 °C. It was significantly superior to the NH3-SCO performance of most previously reported catalysts. The characterization results indicated that the adequate doping amounts of Cu and Er resulted in an obvious enhancement on redox property and surface acidity of CEV/PT-4 catalyst. It also led to abundant Pt0 and surface chemisorbed oxygen species on catalyst surface, which facilitated the oxidation of NH3 to NOx and enhanced i-SCR reactions. In situ DRIFTS results showed that -NH2 species on the surface of CEV/PT-4 catalyst could actively react with nitrate species to generate N2 and H2O.

Molecular imprinting-based sensors: Lab-on-chip integration and biomedical applications

The innovative technology of a marketable lab-on-a-chip platform for point-of-care (POC) in vitro detection has recently attracted remarkable attention. The POC tests can significantly enhance the high standard of medicinal care. In the last decade, clinical diagnostic technology has been broadly advanced and successfully performed in several areas. It seems that lab-on-a-chip approaches play a significant role in these technologies. However, high-cost and time-consuming methods are increasing the challenge and the development of a cost-effective, rapid and efficient method for the detection of biomolecules is urgently needed. Recently, polymer-coated sensing platforms have been a promising area that can be employed in medical diagnosis, pharmaceutical bioassays, and environmental monitoring. The designed on-chip sensors are based on molecular imprinting polymers (MIPs) that use label-free detection technology. Molecular imprinting shines out as a potentially promising technique for creating artificial recognition material with molecular recognition sites. MIPs provide unique advantages such as excellent recognition specificity, high selectivity, and good reusability. This review article aims to define several methods using molecular imprinting for biomolecules and their incorporation with several lab-on-chip technologies to describe the most promising methods for the development of sensing systems based on molecularly imprinted polymers. The higher selectivity, more user-friendly operation is believed to provide MIP-based lab-on-a-chip devices with great potential academic and commercial value in on-site clinical diagnostics and other point-of-care assays.

Molecularly Imprinted Polymer-Based Sensors for Protein Detection

The accurate detection of biological substances such as proteins has always been a hot topic in scientific research. Biomimetic sensors seek to imitate sensitive and selective mechanisms of biological systems and integrate these traits into applicable sensing platforms. Molecular imprinting technology has been extensively practiced in many domains, where it can produce various molecular recognition materials with specific recognition capabilities. Molecularly imprinted polymers (MIPs), dubbed plastic antibodies, are artificial receptors with high-affinity binding sites for a particular molecule or compound. MIPs for protein recognition are expected to have high affinity via numerous interactions between polymer matrices and multiple functional groups of the target protein. This critical review briefly describes recent advances in the synthesis, characterization, and application of MIP-based sensor platforms used to detect proteins.

Greenificated Molecularly Imprinted Materials for Advanced Applications

Molecular imprinting technology (MIT) produces artificial binding sites with precise complementarity to substrates and thereby is capable of exquisite molecular recognition. Over five decades of evolution, it is predicted that the resulting host imprinted materials will overtake natural receptors for research and application purposes, but in practice, this has not yet been realized due to the unsustainability of their life cycles (i.e., precursors, creation, use, recycling, and end-of-life). To address this issue, greenificated molecularly imprinted polymers (GMIPs) are a new class of plastic antibodies that have approached sustainability by following one or more of the greenification principles, while also demonstrating more far-reaching applications compared to their natural counterparts. In this review, the most recent developments in the delicate design and advanced application of GMIPs in six fast-growing and emerging fields are surveyed, namely biomedicine/therapy, catalysis, energy harvesting/storage, nanoparticle detection, gas sensing/adsorption, and environmental remediation. In addition, their distinct features are highlighted, and the optimal means to utilize these features for attaining incredibly far-reaching applications are discussed. Importantly, the obscure technical challenges of the greenificated MIT are revealed, and conceivable solutions are offered. Lastly, several perspectives on future research directions are proposed.

Hydroxypropyl-β-cyclodextrin improves the removal of polycyclic aromatic hydrocarbons by aerobic granular sludge

Polycyclic aromatic hydrocarbons (PAHs) as polar organic pollutants, their potential harm to the environment has caused widespread concern. This study describes a simple method to prepare modified aerobic granular sludge (AGS) by hydroxypropyl-β-cyclodextrin (HP-β-CD). Using HP-β-CD modified AGS as the adsorbent, the removal of specific PAHs: Fluoranthene (Fla) reached 95% comparing to 80% of the unmodified AGS. The removal of Fla was related to initial concentration, temperature and ion concentration (Na⁺, Mg²⁺). The removal efficiency of Fla reached 96.27%, 94.26% and 93.69%, when initial concentration of Fla was 10, 15 and 20 μmol/L. At temperatures of 15°C, 30°C and 45°C, the removal efficiency of Fla (15 μmol/L) gradually improved from 87.20% to 94.84% and 95.73%. The presence of Na⁺ and Mg²⁺ ions led to the deterioration of PAHs removal. With the increase of Na⁺ and Mg²⁺ concentrations, the removal efficiency of modified AGS on PAHs decreased by 3.9% and 6.5%, respectively. These findings indicate the potential application of cyclodextrins as the active sites of a complex modified polymer network for PAHs wastewater treatment.

Template Imprinting Versus Porogen Imprinting of Small Molecules: A Review of Molecularly Imprinted Polymers in Gas Sensing

The selective sensing of gaseous target molecules is a challenge to analytical chemistry. Selectivity may be achieved in liquids by several different methods, but many of these are not suitable for gas-phase analysis. In this review, we will focus on molecular imprinting and its application in selective binding of volatile organic compounds and atmospheric pollutants in the gas phase. The vast majority of indexed publications describing molecularly imprinted polymers for gas sensors and vapour monitors have been analysed and categorised. Specific attention was then given to sensitivity, selectivity, and the challenges of imprinting these small volatile compounds. A distinction was made between porogen (solvent) imprinting and template imprinting for the discussion of different synthetic techniques, and the suitability of each to different applications. We conclude that porogen imprinting, synthesis in an excess of template, has great potential in gas capture technology and possibly in tandem with more typical template imprinting, but that the latter generally remains preferable for selective and sensitive detection of gaseous molecules. More generally, it is concluded that gas-phase applications of MIPs are an established science, capable of great selectivity and parts-per-trillion sensitivity. Improvements in the fields are likely to emerge by deviating from standards developed for MIP in liquids, but original methodologies generating exceptional results are already present in the literature.

Development of Adsorptive Membranes for Selective Removal of Contaminants in Water

The presence of arsenic and ammonia in ground and surface waters has resulted in severe adverse effects to human health and the environment. Removal technologies for these contaminants include adsorption and membrane processes. However, materials with high selectivity and pressure stability still need to be developed. In this work, adsorbents and adsorptive membranes were prepared using nanostructured graphitic carbon nitride decorated with molecularly imprinted acrylate polymers templated for arsenate and ammonia. The developed adsorbent removed arsenate at a capacity and selectivity similar to commercial ion-exchange resins. Ammonia was removed at higher capacity than commercial ion exchange resins, but the adsorbent showed lower selectivity. Additionally, the prepared membranes removed more arsenate and ammonia than non-imprinted controls, even in competition with abundant ions in water. Further optimization is required to improve pressure stability and selectivity.

Ethylene dimethacrylate used as an NH3 adsorbent with high adsorption capacity and selectivity

NH₃ molecularly imprinted polymers (NH₃-MIPs) were synthesized that could successfully separate and recover NH₃ during sludge aerobic composting; however, increased toluene usage during the adsorbent preparation incurred a high cost and severe environmental risks. The purpose of this study was to reduce toluene usage by optimizing the reagent composition of NH₃-MIPs, based on maintaining a high NH₃ adsorption capacity and selectivity. Five adsorbent groups, including NH₃-MIPs, and NH₃-Ethylene dimethacrylate adsorbents (NH₃-EGDMA) with 0%, 75%, 90%, and 100% toluene reduction efficiencies, were prepared and tested for their adsorption performance. The results showed that NH₃-EGDMA with 75% toluene reduction not only had a high NH₃ adsorption capacity (104.42 mg g^-1) but also had a high separation factor for NH₃/methyl sulfide (3121) and NH₃/dimethyl disulfide (4597). The adsorption mechanism was identified as a chemical force between NH₃ and NH₃-EGDMA with a 75% toluene reduction using the analysis of the kinetic model. This study significantly reduces NH₃ adsorbent cost as well as harm to the environment during the adsorbent preparation, which was beneficial to the popularization and application of this NH₃ adsorbent.

A mixed catalyst prepared by mechanically milling VW/TiO2 and low content of Pt/Al2O3 for SCO of high-concentration NH3

The combination of NH3 oxidation and NH3-SCO reaction made Pt0.01@VW catalyst exhibited excellent NH3-SCO performance and very low Pt content.