Landfill leachate treatment by persulphate related advanced oxidation technologies

Nitrogen-doped carbon-coated Cu0 activates molecular oxygen for norfloxacin degradation over a wide pH range

The Fenton-like activated molecular oxygen technology demonstrates significant potential in the treatment of refractory organic pollutants in wastewater, offering promising development prospects. We prepared a N-doped C-coated copper-based catalyst Cu0/NC3-600 through the pyrolysis of Mel-modified Cu-based metal-organic framework (MOF). The results indicate that the degradation of 20 mg/L norfloxacin (NOR) was achieved using 1.0 g/L Cu0/NC3-600 across a wide pH range, with a removal rate exceeding 95 % and total organic carbon (TOC) removals approaching 70 % after 60 min at pH 5-11. The nitrogen doping enhances the electronic structure of the carbon material, facilitating the adsorption of molecular oxygen. Additionally, the formed carbon layer effectively prevent copper leaching,contributing to increased stability to a certain extent. Subsequently, we propose the catalytic reaction mechanism for the Cu0/NC/air system. Under acidic conditions, Cu0/NC3-600 activates molecular oxygen to produce the •O2-, which serves as the primary active species for NOR degradation. While in alkaline conditions, the high-valent copper species Cu3+ is generated in conjunction with •O2-, both working simultaneously for NOR degradation. Furthermore, based on the LC-MS results, we deduced four possible degradation pathways. This work offers a novel perspective on expanding the pH range of copper-based catalysts with excellent ability to activate molecular oxygen for environmental water treatment.

Utilization of microbial fuel cells as a dual approach for landfill leachate treatment and power production: a review

Landfill leachate, which is a complicated organic sewage water, presents substantial dangers to human health and the environment if not properly handled. Electrochemical technology has arisen as a promising strategy for effectively mitigating contaminants in landfill leachate. In this comprehensive review, we explore various theoretical and practical aspects of methods for treating landfill leachate. This exploration includes examining their performance, mechanisms, applications, associated challenges, existing issues, and potential strategies for enhancement, particularly in terms of cost-effectiveness. In addition, this critique provides a comparative investigation between these treatment approaches and the utilization of diverse kinds of microbial fuel cells (MFCs) in terms of their effectiveness in treating landfill leachate and generating power. The examination of these technologies also extends to their use in diverse global contexts, providing insights into operational parameters and regional variations. This extensive assessment serves the primary goal of assisting researchers in understanding the optimal methods for treating landfill leachate and comparing them to different types of MFCs. It offers a valuable resource for the large-scale design and implementation of processes that ensure both the safe treatment of landfill leachate and the generation of electricity. The review not only provides an overview of the current state of landfill leachate treatment but also identifies key challenges and sets the stage for future research directions, ultimately contributing to more sustainable and effective solutions in the management of this critical environmental issue.

Excess sludge-based biochar loaded with manganese enhances catalytic ozonation efficiency for landfill leachate treatment

This study developed an efficient and stable landfill leachate treatment process, which was based on the combination of biochar catalytic ozonation and activated sludge technology for intensive treatment of landfill leachate, aiming to achieve the standard discharge of leachate. The focus is to investigate the effect of manganese loading on the physicochemical properties of biochar and the mechanism of its catalytic ozonation. It was found that more surface functional groups (CO, Mn-O, etc.) and defects (ID/IG = 1.27) were exposed via the change of original carbon structure by loading Mn, which is conducive to the generation of lattice oxygen. Meanwhile, generating different valence states of Mn metal can improve the redox properties and electron migration rate, and encourage the production of reactive oxygen species (ROS) during the reaction process and enhance the catalytic efficiency. The synergistic action of microorganisms, especially denitrifying bacteria, was found to play a key role in the degradation of nitrogenous pollutants during the activated sludge process. The concentration of NH+4-N was reduced from the initial 1087.03 ± 9.56 mg/L to 9.05 ± 1.91 mg/L, while COD was reduced from 2290 ± 14.14 mg/L to 86.5 ± 2.12 mg/L, with corresponding removal rates of 99.17% and 99.20%, respectively. This method offers high efficiency and stability, achieving discharge standards for leachate (GB16889-2008). The synergy between Mn-loaded biochar and microorganisms in the activated sludge is key to effective treatment. This study offers a new approach to solving the challenge of waste leachate treatment.

Preparation of Cobalt-Nitrogen Co-Doped Carbon Nanotubes for Activated Peroxymonosulfate Degradation of Carbamazepine

Cobalt-nitrogen co-doped carbon nanotubes (Co3@NCNT-800) were synthesized via a facile and economical approach to investigate the efficient degradation of organic pollutants in aqueous environments. This material demonstrated high catalytic efficiency in the degradation of carbamazepine (CBZ) in the presence of peroxymonosulfate (PMS). The experimental data revealed that at a neutral pH of 7 and an initial CBZ concentration of 20 mg/L, the application of Co3@NCNT-800 at 0.2 g/L facilitated a degradation rate of 64.7% within 60 min. Mechanistic investigations indicated that the presence of pyridinic nitrogen and cobalt species enhanced the generation of reactive oxygen species. Radical scavenging assays and electron spin resonance spectroscopy confirmed that radical and nonradical pathways contributed to CBZ degradation, with the nonradical mechanism being predominant. This research presents the development of a novel PMS catalyst, synthesized through an efficient and stable method, which provides a cost-effective solution for the remediation of organic contaminants in water.

Pollutant transport behavior through polymer cutoff wall: Laboratory test and analytical model investigation

Polymer cutoff wall has emerged as a new and promising technology for anti-seepage and anti-pollution in geotechnical engineering. With notable advantages such as rapid sealing, high efficiency, and environmental friendliness, this technology has garnered significant attention. This study presents a systematic investigation into the transport characteristics of pollutants in polymer materials, with a specific focus on the transport mechanisms through polymer cutoff wall. The research investigates various factors that influence the pollutant transport characteristics in polymer materials. The objective is to analyze the pollutant transport behavior and obtain the transport parameters. Moreover, the study develops and solves a one-dimensional transport model incorporating partition-diffusion-partition mechanisms, aiming to determines the long-term service performance of polymer wall. These findings contribute to a better understanding of pollutant transport through polymer walls, which is crucial for the future advancement and utilization of this technology.

Solar photo-Fenton and persulphate-based processes for landfill leachate treatment: A critical review

Landfilling is the most usual solid waste management strategy for solid residues disposal. However, it entails several drawbacks such as the generation of landfill leachate that seriously threaten human life and the environment due to their toxicity and carcinogenic character. Among various technologies, solar photo-Fenton and sulphate-based processes have proven to be suitable for the treatment of these polluted streams. This review critically summarises the last three decades of studies in this field. It is found that the solar homogeneous photo-Fenton process should be preferably used as a pre- and post-treatment of biological technologies and as a standalone treatment for young, medium, and mature leachates, respectively. Studies on heterogeneous solar photo-Fenton process are lacking so that this technology may be scaled-up for industrial applications. Sulphate radicals are attractive for removing both COD and ammonia. However, no study has been reported on solar sulphate activation for landfill leachate treatment. This review discusses the main advances and challenges on treating landfill leachate through solar AOPs, it compares solar photo-Fenton and solar persulphate-based treatments, indicates the future research directions and contributes for a better understanding of these technologies towards sustainable treatment of landfill leachate in sunny and not-so-sunny regions.

Maximizing bio-methane potential from municipal landfill leachate through ultrasonic pretreatment

In the quest for sustainable waste management solutions, this study explores the integration of ultrasonic pretreatment as a preparatory step for the anaerobic digestion of landfill leachate. Employing response surface methodology (RSM) coupled with central composite design (CCD), we systematically optimize the process parameters, including pH, inoculum volume, and ultrasonic pretreatment duration, to maximize the yield of bio-methane potential (ml CH4/g VS). The results demonstrate the effective application of RSM-CCD for predicting and modelling methane generation, with a highly significant model (R2 = 0.899). The optimized conditions reveal a remarkable biomethane potential of 177 ml CH4/g VS. Additionally, this study contributes to the understanding of the positive effect of ultrasound pretreatment on the anaerobic digestion of landfill leachate, and the quality of the digestate obtained after anaerobic digestion was studied and different valorisations were proposed.

Landfill leachate has multiple negative impacts on soil health indicators in Hyrcanian forest, northern Iran

The storage of municipal solid wastes in unengineered landfills poses a severe threat to soil functions and health. Wastes seriously threaten human health and the terrestrial ecosystem, especially due to heavy metals. There is a general knowledge gap about the long-term impacts of storage wastes on the soil health indicators which are effective on soil functions. This investigation focuses on the examination of landfill leachate on soil health indicators from different years in the Hyrcanian forest region in northern Iran. For this purpose, soil sampling was done in the summer of 2012 and 2022 (from three depths of 0-10, 10-20, and 20-30 cm and on a surface of 30 cm × 30 cm). Soil samples were randomly collected from a polluted forest used as waste storage and a nearby unpolluted protected forest. In addition to the general soil physical, chemical and biological parameters, the amounts of cadmium (Cd) and lead (Pb) in the soil were also measured. Simultaneously with soil sampling, earthworms (from a depth of 0-30 cm) were collected and identified. Also, the concentration of Cd and Pb in the earthworm's biomass were measured in the laboratory. We found that unpolluted sites had maximum values of N, K, P, and Ca than the polluted sites. In addition, a decrease of soil aggregates stability, nutrient contents, microbial and enzyme activities, and also fauna and microflora abundance were found in the polluted sites in the period 2012-2022. Soil Cd and Pb contents were more in the polluted site in 2022 compared to the unpolluted site. Lumbricus rubellus and Lumbricus terrestris earthworms had significantly higher population in the polluted sites and higher accumulation of Cd and Pb in biomass. According to our results, soil health decreased in the order unpolluted site 2022 > unpolluted site 2012 > polluted site 2012 > polluted site 2022, which corresponds with the reduction of soil health during the release of landfill leachate. This investigation contributes to understand landfill pollution derived from leachate and its effects on soil physical, chemical and biological parameters to help managing landfill leachate. Therefore, the main issue is choosing a landfill system that minimizes the risk of pollution, installing a leachate collection system and constructing a landfill with engineering principles that can reduce the effects of urban waste pollution on soil health. We emphasize that landfilling is dangerous for the environment, so the government should implement sanitary landfilling to prevent further contamination of surface and underground waters, as well as soil in the precious Hyrcanian forest.

Ultrasound-based advanced oxidation processes for landfill leachate treatment: Energy consumption, influences, mechanisms and perspectives

Advanced oxidation processes (AOPs) based on ultrasound (US) have attracted considerable attention in recent years due to its advantages in the degradation of landfill leachate. The review summarizes the existing treatment methods of leachate from lab-scale, compares their advantages and disadvantages by focusing on the degradation of emerging contaminants (ECs) in the leachate. Then the US-based AOPs are introduced emphatically, including their degradation mechanisms, influencing factors, energy consumption, further optimization methods as well as the possibility of field-scale application are systematically described. Moreover, this review also expounds on the advantages of dual-frequency US (DFUS) technology compared with single-frequency US, and a theoretically feasible DFUS process is proposed to treat ECs in the leachate. Finally, suggestions and prospects for US technologies in treating landfill leachate are put forward to aid future research on landfill leachate treatment. Meaningfully, this manuscript will provide reference values of US-based technologies in landfill leachate treatment for the practical use, facilitating the development of US-based AOPs in landfill leachate management and disposal.

Preparation and characterization of activated carbons from Lemon Pulp for oxytetracycline removal

This study aims to remove oxytetracycline (OTC) that harms the ecosystem, with activated carbon (LPAC) obtained from Lemon Pulp (LP). Characterization and properties of LPAC were analyzed by Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffraction (XRD) and point of zero charge (pH_PZC) analyses. BET surface area, pore volume and pH_PZC of LPAC produced by carbonization at 400 °C and activation with KOH at 800 °C were obtained as 1333.01 m²/g, 0.391 cm³/g, and 6.81, respectively. pH, reaction time, initial OTC concentration, and adsorbent amounts were optimized in the adsorption study performed with LPAC with high porosity and micropores. Kinetic evaluation was made with pseudo-first-order, pseudo-second-order, and intra-particle diffusion models and Freundlich, Langmuir, and Temkin equations are used to investigate their isotherms under reaction equilibrium conditions, and also the results were analyzed by statistical method (ANOVA). In pseudo-second-order kinetic and Freundlich isotherm models, where the best results were obtained, R² values were calculated as 0.999 and 0.995, respectively. Maximum OTC removal efficiency was found as 104.22 mg/g. Overall, this research indicates that LPAC for the treatment of water contaminated with antibiotics is environmentally friendly green material.

Nitrogen-doped carbon materials prepared using different organic precursors as catalysts of peroxymonosulfate to degrade sulfamethoxazole: First-time performance leading to the incorrect selection of the best catalyst

Nitrogen-doped carbon materials are effective catalysts for peroxymonosulfate (PMS) activation to eliminate organic contaminants. In this research, the activity of nitrogen-doped carbon materials was significantly improved by optimizing the carbon source, and the reusability of the catalyst is used to select the best catalyst instead of depending on the performance in the first use, for avoiding the "short-life" catalyst with great initial activity. Fixing ferric nitrate nonahydrate and melamine as the metal and nitrogen sources, four catalysts were prepared using glucose, glucosamine hydrochloride, dopamine, and trimesic acid as the carbon sources, respectively. Based on the performance in PMS activation for sulfamethoxazole (SMX) removal, in the first use, the activity was Fe-DA-CN (carbon source: dopamine) > Fe-BTC-CN (carbon source: trimesic acid) > Fe-GLU-CN (carbon source: glucosamine) > Fe-DGLU-CN (carbon source: glucose). With no washing for the second time use, the activity was Fe-BTC-CN (0.135 min^-1) ≫ Fe-DA-CN (0.037 min^-1) > Fe-GLU-CN (0.032 min^-1) > Fe-DGLU-CN (0.017 min^-1). The large specific surface area, superior graphitization, and high CO/C-N group content endow Fe-BTC-CN with high ability in PMS activity. Surface-bound radicals are responsible for SMX elimination, and most of the SMX degradation intermediates have lower ecotoxicity than SMX.

Challenges and engineering application of landfill leachate concentrate treatment

Landfill leachate concentrate (LLC) is a concentrated waste stream from landfill leachate treatment systems and has been recognized as a key challenge due to its high concentration of salts, heavy metals, organic matters, etc. Improper management of LLC (e.g. reinjection) would exacerbate the performance of upstream treatment processes and pose risks to the surrounding environments near landfill sites. Addressing the challenge and recovering resources from LLC have thus been attracting considerable attention. Although many LLC treatment technologies have been developed, a comprehensive discussion about the challenges still lacks. This review critically evaluates mainstream LLC treatment technologies, namely incineration, coagulation, advanced oxidation, evaporation and solidification/stabilization. We then introduce a geopolymer-based solidification (GS) process as a promising technology owning to its simple casting process and reusable final product and summarizes engineering applications in China. Finally, we suggest investigating hybrid systems to minimize LLC production and achieve the on-site reuse of LLC. Collectively, this review provides useful information to guide the selection of LLC treatment technologies and suggests a sustainable alternative for large-scale application, while also highlighting the need of joint efforts in the industry to achieve efficient, ecofriendly and economical on-site management of landfill waste streams.

Use of copper sheet in a solar photo-Fenton-like process applied in the treatment of landfill leachate

It is known that copper can be used as catalyst in photo-Fenton-like process; however, there is a lack of information related with its use in the treatment of landfill leachate (LL) in solar photo-Fenton-like processes. Here, we studied the effect of the mass of a copper sheet, the pH of the solution, and the concentration of LL in the removal of the organic matter present in this water. Before the reaction with landfill leachate, the copper sheet used in the reaction was constituted by Cu⁺ and Cu₂O, respectively. The results showed that in a volume of 0.5 L of a pretreated LL, the higher removal of organic matter resulted using a mass of 2.7 g of the copper sheet, a pH of solution of 5, and a concentration of LL of a 10%, obtaining a final value of C/C₀ of chemical oxygen demand (COD) of 0.34, 0.54, 0.66, and 0.84 for concentrations of 25%, 50%, 75%, and 100%, respectively, and 0.0041, 0.0042, 0.0043, and 0.016 for concentration of 25%, 50%, 75%, and 100%, respectively, of C/C₀ of humic acids. The photolysis on LL at its natural pH using solar UV removes very little humic acid and COD, going from 9.4 to 8.5 and 7.7 Abs₂₅₄ for photolysis and UV + H₂O₂, obtaining 8.6 and 17.6% of removal, respectively, and 2.01 and 13.04% removal of COD, respectively. Copper sheet applied under Fenton-like conditions results in 65.9% removal and an increase of 0.2% for humic acid and COD, respectively. Removal using only H₂O₂ for Abs₂₅₄ and COD was 11.95 and 4.3%, respectively. Raw LL produced a 29.1% inhibition of the biological activated sludge rate after the adjustment to pH 7 and the final process of inhibition was 0.23%.

Tricks and tracks in waste management with a special focus on municipal landfill leachate: Leads and obstacles

Landfilling is the most widely used disposal method for municipal solid waste around the world. The main disadvantage of this strategy is formation of leachate, among other aspects. Landfill leachate contains highly toxic and bio-refractory substances that are detrimental to the environment and human health. Hence, the risk(s) of discharging potentially harmful landfill leachate into the environment need to be assessed and measured in order to make effective choices about landfill leachate management and treatment. In view of this, the present review aims to investigate (a) how landfill leachate is perceived as an emerging concern, and (b) the stakeholders' mid- to long-term policy priorities for implementing technological and integrative solutions to reduce the harmful effects of landfill leachate. Because traditional methods alone have been reported ineffective, and in response to emerging contaminants and stringent regulations, new effective and integrated leachate treatments have been developed. This study gives a forward-thinking of the accomplishments and challenges in landfill leachate treatment during the last decade. It also provides a comprehensive compilation of the formation and characterization of landfill leachate, the geo-environmental challenges that it raises, as well as the resource recovery and industrial linkage associated with it in order to provide an insight into its sustainable management.

Approach to a fungal treatment of a biologically treated landfill leachate

White-rot fungi (WRF) have the ability to synthetize extracellular enzymes that could degrade recalcitrant pollutants. The aim of this work was to evaluate the use of P. chrysosporium to treat a biologically and physically pre-treated landfill leachate which high load of refractory compounds (COD>1000 mg/L, BOD₅<50 mg/L) in order to reduce COD and colour. Batch tests were carried out at 26 °C and 135 rpm for 15 days. The soluble chemical oxygen demand (sCOD), soluble biological oxygen demand (sBOD₅) and colour, as well as the lignin peroxidase (LiP) and manganese peroxidase (MnP) enzymatic activities were analysed. Besides, the effects of different operating conditions, i.e., pH control, permeate dilution and supplementation, on treatment efficacy were investigated. The control of pH was shown to be key for fungal treatment. In addition, it was found that the addition of carbon and nitrogen sources improved the enzymatic synthesis and the removals of sCOD and colour. Data here obtained open the possibility of using fungi for reducing the amount of recalcitrant pollutants still present in treated landfill leachates or similar effluents.

Enhanced thermal activation of persulfate by coupling hydrogen peroxide for efficient degradation of pyrene

In this study, H₂O₂ was introduced into thermally activated persulfate oxidation system (T-HPS), and the oxidation of pyrene (PYR) was investigated by the combined T-HPS technology. The results showed that H₂O₂ could significantly improve the reactivity of the thermally activated persulfate system (T-PS), with 240-min PYR degradation ratio increasing from 79.3% to 97.2% at 70 °C. In the T-HPS system, as persulfate initial concentration increased from 5 to 100 μM, the kinetic rate constant (k_obs) of PYR degradation increased from 4.70 × 10^-3 to 3.01 × 10^-2 min^-1, but the k_obs did not show a positive association with H₂O₂ concentration with the same range, and the highest k_obs was obtained at the H₂O₂ initial concentration of 20 μM. The optimal ratio of PS and H₂O₂ was set at 1:1 with the initial concentrations of the two oxidants both being 20 μM. Furthermore, PYR could be removed efficiently in a wide range of pH, and the best PYR degradation performance was obtained under neutral pH. Scavenging experiments demonstrated that OH played a more important role in PYR degradation in the T-HPS system than in the T-PS system. As suggested by the Arrhenius equation, the activation energy decreased from 124.5 to 107.4 kJ mol^-1 after adding H₂O₂ to the T-PS system. This study provides a new oxidation approach that could prompt the T-PS activity by adding a suitable dosage of H₂O₂.

Molecular insights into the transformation of refractory organic matter in landfill leachate nanofiltration concentrates during a flocculation and O3/H2O2 treatment

During leachate treatment, molecular information regarding the completely removed, partially removed, less-reactive, increased, and produced parts of dissolved organic matter (DOM) remains unknown. This study applied ESI FT-ICR MS to investigate the transformation characteristics of leachate nanofiltration concentrate (NFC) DOM during a combined flocculation-O₃/H₂O₂ process. The NFC contained 5069 compounds in four main classes (CHO, CHON, CHOS, and CHONS compounds). The DOM number decreased to 4489 during flocculation and to 2903 after the O₃/H₂O₂ process. During flocculation, the completely and partially removed DOM was mainly low-oxygen unsaturated and phenolic compounds. Saturated DOM was produced and remained in the flocculated effluent. During the O₃/H₂O₂ process, the completely and partially removed DOM were mainly low-oxygen unsaturated and phenolic compounds that were mainly in a reduced state. Flocculation can remove many (condensed) aromatic compounds, and methylation and hydrogenation reactions occurred during flocculation. In the O₃/H₂O₂ process, dearomatization, demethylation, carboxylation, and carbonylation reactions further achieved the degradation of DOM that was resistant to flocculation. Overall, the combined flocculation-O₃/H₂O₂ process collectively eliminated a broader range of DOM than the single processes could achieve. The results of this study provide an in-depth understanding of DOM transformation in an NFC treatment.

Removal of organochlorine pesticides and metagenomic analysis by multi-stage constructed wetland treating landfill leachate

Constructed wetlands (CWs) can effectively treat landfill leachate (LL). However, there is limited research on the removal of organochlorine pesticides (OCPs) refractory organics during LL treatment in CWs. In this study, multi-stage subsurface flow CWs was used to treat LL, and the removal fate of hexachlorocyclohexane (HCH) and dichlorodiphenyltrichloroethane (DDT) in CWs was investigated. The structural differences between plant roots and substrate microbial communities were compared and the Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathway of organic matter was analyzed based on metagenomic analysis. The results showed that substrate adsorption (50.55%-72.74%) and microbial degradation (20.38%-27.89%) were the main ways to remove OCPs. The Proteobacteria occupied a dominant position in the CWs system, among which Betaproteobacteria (34.37%-35.90%) were contained in the substrate, and Alphaproteobacteria (21.19%-23.84%) was a more dominant microorganism in plant roots. Formaldehyde assimilation and serine pathway were the main pathways of methane metabolism. This study provides a reference for the removal mechanism of OCPs to promote the application of CWs technology in LL treatment.

Experimental Study on the Treatment of Landfill Leachate by Electro-Assisted ZVI/UV Synergistic Activated Persulfate System

To solve the problem of the poor treatment of high concentration landfill leachate, an electro-assisted ultraviolet (UV)/zero-valent iron (ZVI) synergic activated persulfate (PS) system was used to treat landfill leachate. The effects of PS and ZVI dosage, initial pH value, and current density on the removal efficiency of COD and NH3-N in landfill leachate were investigated. The treatment effects of single PS, single electrochemical, UV/PS, electro-assisted ZVI activated PS, and electro-assisted ZVI/UV co-activated PS were compared. At the same time, UV-visible and three-dimensional fluorescence spectroscopy were performed on the landfill leachate before and after treatment. The results show that under the optimal conditions of initial pH = 3, the dosage of PS/12COD = 1, ZVI = 1.5 g/L, current density 62.5 mA/cm2, and t = 6 h, most of the macromolecular organic substances such as humic acid and fulvic acid were removed. Removal efficiencies of COD, NH3-N, and Chroma reached 81.99%, 89.90%, and 99.75%, respectively. The BOD5/COD value increased from 0.23 to 0.46. In addition, the radical identification results showed that the degradation of COD was due to the combined action of sulfate radicals (SO4•−) and hydroxyl radicals (•OH) and that SO4•− was dominant. The combined means of synergistic activation of PS for landfill leachate treatment was significantly better than that of single means of PS activation, confirming that electrically assisted ZVI/UV synergistic activation of PS is a promising method for landfill leachate treatment.

Performance analysis of a half-batch multi-cell three-dimensional electrode reactor for drilling wastewater: COD removal, energy consumption and hydrodynamic characteristic

Although a three-dimensional electrode system (3DES) has made remarkable achievements in improving the property of electrodes and investigating pollutant degradation mechanism, the design of an electrochemical reactor for application in drilling wastewater has not been reported yet. In this study, a novel half-batch multi-cell 3DES reactor was constructed by us to degrade organic compounds from drilling wastewater. The separate effect of electrolysis time, current density, the configuration of granular activated carbon (GAC) electrodes, aeration rate and volumetric recirculation flow on chemical oxygen demand (COD) removal and energy consumption of the half-batch reactor were analyzed, and further optimization via response surface methodology (RSM). Results showed that the optimal operation conditions for the reactor included electrolysis time of 100 min, a current density of 9.2 mA/cm², GAC electrode vertical configuration, an aeration rate of 2.67 L/min and a volumetric recirculation flow of 100 mL/min. Under these conditions, the maximum percentage COD removal was found to be 97.39% with an energy consumption of 77.89 kWh(kg COD)^-1. The residence time distribution (RTD) method was carried out in continuous flow pattern to investigate the hydrodynamic characteristics of the reactor. Results showed that flow rate was the most dominant factor for the flow pattern of the reactor, followed by the aeration rate and current density. The low dispersion number and the percentage of dead volume are 0.214 and 3.87% when the flow rate of 100 mL/min, respectively, which indicates that there is an intermediate flow pattern existing in between plug-flow ideal and complete mixing flow, furthermore, it is close to the plug-flow ideal.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.

Removal of Organics from Landfill Leachate by Heterogeneous Fenton-like Oxidation over Copper-Based Catalyst

Landfill leachates are a mixture of high concentration organic and inorganic contaminants and need to be appropriately treated due to their toxicity and severe adverse effects on the environment. Here, we studied the treatment of landfill leachate through a heterogeneous Fenton-like oxidation process using a zirconia supported copper catalyst (Cu/ZrO2). Reaction conditions such as pH, amount of catalyst, oxidant dose, temperature, and reaction time were investigated and their effects on pollutant abatement discussed. AOS (average oxidation state) and COS (carbon oxidation state) parameters were used for the evaluation of the degree of oxidation of the process, obtaining some insight into the formation of oxidized intermediates (partial oxidation) and the total oxidation (mineralization) of the leachate during the reaction. A two-step oxidation process enhanced the overall performance of the reaction with an abatement of organic compounds of 92% confirming the promising activity of a copper-based catalyst for the treatment of liquid waste. Higher catalytic activity was achieved when the following reaction conditions were applied: 70 °C, pH 5, 200 mg/L of catalyst, 30 mL/L of H2O2 dose, and 150 min. In addition, durability of the catalyst under optimized reaction conditions was verified by repeated reaction cycles.

Application fields of kitchen waste biochar and its prospects as catalytic material: A review

In China, a large amount of kitchen waste (KW) is generated each year, and the resource utilisation of the KW has become a problem. KW has a high carbon content and can be used as a raw material for biochar. Kitchen waste biochar (KWB) can be used to prepare adsorption materials, soil amendments, energy materials, carbon quantum dots, and electrode materials. However, few studies have used KWB as a raw material for catalytic materials. The application of sulfur (S) and nitrogen (N) doped biochar in the field of catalysis has proved effective and feasible. KWB contained a certain mass percentage of N and S elements, which has good application potential for use in the field of catalysis by KWB. In the process of preparing KWB by KW, keeping S and N as much as possible and converting them into pyridine N and thiophene S benefit the application of catalysis. This review provides a reference for the future application of KWB in China.

A review on the landfill leachate treatment technologies and application prospects of three-dimensional electrode technology

With the expansion of urbanisation, the total amount of solid waste produced by urban residents has been increasing, and the problem of municipal solid waste disposal has also been aggravated. Landfill leachate treatment technologies could be divided into three categories: biological, physical and advanced oxidation treatment technology. Among them, advanced oxidation treatment technology has a good effect on the treatment of landfill leachate with little secondary pollution and has excellent application potential. Three-dimensional (3D) electrode technology, as a new type of advanced oxidation technology, could remove refractory pollutants in water and has attracted considerable attention. This article aims to (1) compare existing landfill leachate treatment technologies, (2) summarise 3D electrode technology application scenarios, (3) discuss the advantages of 3D electrode technology in landfill leachate treatment and (4) look ahead the future directions of 3D electrode technology in landfill leachate treatment. We hope that this article will be helpful to researchers who are interested in the field of landfill leachate treatment.