New insights into the role of molecular structures on the fate and behavior of antibiotics in an osmotic membrane bioreactor

Critical review on salt tolerance improvement and salt accumulation inhibition strategies of osmotic membrane bioreactors

The osmotic membrane bioreactor (OMBR) is a novel wastewater treatment and resource recovery technology combining forward osmosis (FO) and membrane bioreactor. It has attracted attention for its low energy consumption and high contaminant removal performance. However, in the long-term operation, OMBR faces the problem of salt accumulation due to high salt rejection and reverse salt flux, which affects microbial activity and contaminants removal efficiency. This review analyzed the feasibility of screening salt-tolerant microorganisms and determining salinity thresholds to improve the salt tolerance of OMBR. Combined with recent research, the inhibition strategies for salt accumulation were reviewed, including the draw solution, FO membrane, operating conditions and coupling with other systems. It is hoped to provide a theoretical basis and practical guidance for the further development of OMBR. Finally, future research directions were prospected. This review provides new insights for achieving stable operation of OMBR and promotes its wide application.

Impacts of draw solutes on the fate of tetracycline in an osmotic membrane bioreactor: Role of the combination between membrane fouling and microorganisms

Osmotic membrane bioreactors (OMBRs) are considered a suitable technology for treating wastewater containing tetracycline due to their high rejection and biodegradation efficiency. However, the impact of membrane fouling layer (i.e., chemical composition, microbial composition, and formation) on the filtration and biodegradation of tetracycline is still unclear. Herein, the effects of draw solute concentration and type on the formation of a membrane fouling layer for tetracycline filtration and its relationship with microbial activity were investigated. The results showed that over 99% of tetracycline was retained on the feed side by membrane rejection, and the fouling layer played an important role in tetracycline filtration. Specifically, membrane foulants resulted in a more hydrophilic membrane facilitating tetracycline filtration, while the tetracycline-degrading genera from the fouled membrane promoted tetracycline degradation. The structure equation model showed that tetracycline filtration dominated by electrostatic repulsion between tetracycline and the fouled membrane was more important than tetracycline degradation for tetracycline removal (path coefficient of 0.655 vs. 0.395). This study provided insights into the combined effect of membrane foulants and microorganisms on tetracycline removal.

Integration of Porous Nanomaterial-Infused Membrane in UF/FO Membrane Hybrid for Simulated Osmosis Membrane Bioreactor (OsMBR) Process

This study explored the use of a combination of hydrothermal and sol-gel methods to produce porous titanium dioxide (PTi) powder with a high specific surface area of 112.84 m²/g. The PTi powder was utilized as a filler in the fabrication of ultrafiltration nanocomposite membranes using polysulfone (PSf) as the polymer. The synthesized nanoparticles and membranes were analyzed using various techniques, including BET, TEM, XRD, AFM, FESEM, FTIR, and contact angle measurements. The membrane's performance and antifouling properties were also assessed using bovine serum albumin (BSA) as a simulated wastewater feed solution. Furthermore, the ultrafiltration membranes were tested in the forward osmosis (FO) system using a 0.6-weight-percent solution of poly (sodium 4-styrene sulfonate) as the osmosis solution to evaluate the osmosis membrane bioreactor (OsMBR) process. The results revealed that the incorporation of PTi nanoparticles into the polymer matrix enhanced the hydrophilicity and surface energy of the membrane, resulting in better performance. The optimized membrane containing 1% PTi displayed a water flux of 31.5 L/m²h, compared to the neat membrane water value of 13.7 L/m²h. The membrane also demonstrated excellent antifouling properties, with a flux recovery of 96%. These results highlight the potential of the PTi-infused membrane as a simulated osmosis membrane bioreactor (OsMBR) for wastewater treatment applications.

Shedding light on the transfer of tetracycline in forward osmosis through experimental investigation and machine learning modeling

Tetracycline in wastewater can pose adverse impacts on the environment and human health. Forward osmosis (FO) is a promising method to reject antibiotics due to its low energy demand and high rejection rate. Tetracycline rejection during FO is a complicated process. Mechanistic models have been developed to describe antibiotic rejection by the FO membrane under ideal conditions but cannot be applied to real wastewater. Herein, the effects of draw concentration, pH, and solute type on the fate of tetracycline during FO were investigated by combining experimentation, factor analysis, and artificial neural network (ANN) modeling. High draw concentrations led to high convection that favored tetracycline diffusion. Low draw pH helped reject antibiotics potentially due to the decreased tortuosity and pore size of the FO membrane. When different draw solutes were tested, both convection and electrostatic interaction exerted effects on tetracycline retention on the FO membrane surface, and steric hindrance could further affect the amount of tetracycline in the draw solution. Exploratory factor analysis (EFA) showed that tetracycline rejection was a combined result of convection, steric hindrance, and electrostatic interactions. Path analysis revealed the significant roles of initial conductivity and draw pH in tetracycline rejection. Eight representative input variables were selected from 13 observed explanatory variables using redundancy analysis (RDA), based on which an ANN was trained and successfully predicted tetracycline diffusion and transfer through the FO membrane. These results have provided practical and predictive insights in the development of FO processes for efficient treatment of pharmaceutical wastewater.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

Strategies for studying in vivo biochemical formation pathways and multilevel distributions of sulfanilamide metabolites in food (2012-2022)

Sulfonamide metabolites are a major source of food pollution worldwide. However, the formation of internal sulfanilamide metabolites has only been investigated for selected compounds. In this paper, the fragmentation mechanism and characteristic ions of sulfonamide metabolites are reviewed using density functional theory and Q-Orbitrap high-resolution mass spectrometry. The result of the protonation site, rearrangement and bond breaking induced fragmentations at C₆H₆NO₂S⁺m/z 156.01138, C₆H₆NO⁺m/z 108.04439, and C₆H₆N⁺m/z 92.04948. Mass shifts are calculated for derivative metabolites, including hydrogenation, acetylation, oxidation, glucosylation, glucosidation, sulfation, deamination, formylation, desulfonation and O-aminomethylation. Given their homologous series, it is demonstrated that similar metabolic reactions occur for all sulfonamides. The suspicious sulfonamide metabolites are confirmed by d-labelling experiments and reference standards. This is the first review of the latest advances in the field of sulfonamide metabolite prediction (2012-2022), and scheme design for metabolite multirresidue screening, as well as the challenges in the mass spectrometry evolution.

Ag-TiO2/biofilm/nitrate interface enhanced visible light-assisted biodegradation of tetracycline: The key role of nitrate as the electron accepter

Due to the pivotal role of Ag-TiO₂/biofilm/nitrate interface, enhanced visible light-assisted biodegradation of tetracycline (TC) in anoxic system was realized through both batch experiment and long-term operation in this study. The results of the batch experiment elucidated that 50 mg L^-1 TC could be completely removed within 10 h in Ag-TiO₂/biofilm/nitrate system. The continuous flow experiment was operated for 75 d to evaluate the performance and stability of Ag-TiO₂/biofilm/nitrate system. TC removal efficiency in Ag-TiO₂/biofilm/nitrate system was as high as 92.4 ± 1.6% at influent TC concentration of 50 mg L^-1 TC and hydraulic retention time (HRT) of 10 h, which would be attributed to the promoted separation of photoholes and photoelectrons at the presence of nitrate as electron acceptor. Facilitated electron transfer between semiconductor and biofilm was beneficial for enhancing TC biodegradation, thus lowering toxicity of intermediate products and promoting microbial activity. Moreover, the species related to TC biodegradation (Rhodopseudomonas, Phreatobacter and Stenotrophomonas), denitrification (Thauera) and electron transfer (Delftia) were enriched at Ag-TiO₂/biofilm/nitrate interface. Besides, a possible mechanism involved in enhanced TC degradation and nitrogen removal at Ag-TiO₂/biofilm/nitrate interface was proposed. This study provided a novel and promising strategy to enhance recalcitrant TC removal from industrial wastewater.