Designing and fabricating a CdS QDs/Bi2MoO6 monolayer S-scheme heterojunction for highly efficient photocatalytic C2H4 degradation under visible light

Unlocking enhanced photocatalytic power: Donor-acceptor synergy in non-metallic g-C3N4 hollow nanospheres

Selecting safe, non-toxic, and non-metallic semiconductor materials that facilitate the degradation of pollutants in water stands out as an optimal approach to combat environmental pollution. Herein, graphitic carbon nitride (g-C3N4)-based hollow nanospheres nonmetallic photocatalyst modified with covalent organic framework materials named TpMA, based on 1, 3, 5-trimethylchloroglucuronide (Tp) and melamine (MA), was successfully synthesized (abbreviated as CNTP). The ordered electron donor-acceptor structure inherent in TpMA contributed to enhancing the transport efficiency of photogenerated carriers in CNTP. The CNTP photocatalysts exhibited excellent performance in degrading rhodamine B and tetracycline in visible light, with optimal degradation rates reached more than 90% in 60 and 80 min, respectively, which were 5.3 and 3.0 times higher than those of pure CNNS. The increased photocatalytic efficiency observed in CNTP composites could be traced back to the covalently connection between the two molecules, forming a π-conjugated system that facilitated the separative efficiency of photogenerated electron-hole pairs and intensified the utilization of visible light. This study provided a new means to design and fabricate highly efficient and environmentally friendly non-metallic photocatalytic materials.

Engineering Heterostructured Fe-Co-P Arrays for Robust Sodium Storage

Transition metal phosphides attract extensive concerns thanks to their high theoretical capacity in sodium ion batteries (SIBs). Nevertheless, the substantial volume fluctuation of metal phosphides during cycling leads to severe capacity decay, which largely hinders their large-scale deployment. In this regard, heterostructured Fe-Co-P (FeP/Co2P) arrays are firstly constructed in this work for SIBs. The novel self-supported construction without insulated binders favors fast charge migration and Na+ ion diffusion. In addition, the special heterostructure with abundant heterointerfaces could considerably mitigate the volume change during (de)sodiation and provide increased active sites for Na+ ions. Density functional theoretical (DFT) calculations confirm the built-in electric field in the heterointerfaces, which greatly hastens charge transfer and Na+ ion transportation, thereafter bringing about enhanced electrochemical performance. Most importantly, the FeP/Co2P heterostructure discloses higher electrical conductivity than that of bare FeP and Co2P based on the theoretical calculations. As anticipated, the heterostructured Fe-Co-P arrays demonstrate superior performance to that of Fe-P or Co-P anode, delivering high reversible capacities of 634 mAh g-1 at 0.2 A g-1 and 239 mAh g-1 at 1 A g-1 after 300 cycles.

Oxygen-Defective Bi2MoO6/g-C3N4 hollow tubulars S-scheme heterojunctions toward optimized photocatalytic performance

Novel S-scheme heterojunction photocatalysts of bismuth molybdate/hollow tube graphite carbon nitride (Bi2MoO6 SOVs/g-C3N4) containing surface defects (SOVs) were prepared by calcination and hydrothermal methods. The hollow tubular structure of g-C3N4 facilitates the enhancement of multiple reflection and scattering of light, and also have a larger range of specific surface areas and more reactive sites, which promotes carrier separation and thus improves photocatalytic performance. The introduction of SOVs to bismuth molybdate not only reduces the band gap of bismuth molybdate, but also promotes the separation of charges. The optimized Bi2MoO6 SOVs/TCN photocatalyst has a hydrogen production efficiency of 2.29 mmol h-1 g-1. It also shows high photocatalytic degradation property of tetracycline and bisphenol A in water, up to 97.3 % and 98.9 %, respectively. Meanwhile, the transfer mechanism of photogenerated charges in S-scheme heterojunctions can be verified by electron paramagnetic resonance and in situ irradiated x-ray photoelectron spectroscopy electron paramagnetic resonance, which accelerated the separation and transfer of photogenerated charge by energy band bending at the interface and internal electric field. This rational structural design strategy provides a new development idea for building high-performance S-scheme heterojunction photocatalysts.

A porous polyacrylonitrile (PAN)/covalent organic framework (COF) fibrous membrane photocatalyst for highly efficient and ultra-stable hydrogen evolution

Photocatalytic water splitting has been regarded as one of the most promising technologies to generate hydrogen as an ideal energy carrier in the future. However, most of the experience for such process are derived from the researches based on the suspension powder photocatalysts under a stirring condition and a practical scaling application is urgently calling for the high-efficient panel reactors based on the membrane photocatalysts. Herein, we develop a new series of flexible and ultrastable membrane photocatalysts through a controllable growth of covalent organic framework (COF) photocatalysts on the polyacrylonitrile (PAN) electrospun fiber membrane. Multiple characterization techniques verify the successful anchoring of the COF-photocatalysts on the PAN fibers, forming a three-dimensional porous PAN/COF membrane photocatalyst with excellent light absorption ability, high specific surface area, and good hydrophily. As a result, the optimized PAN/COF membrane photocatalyst exhibits excellent hydrogen evolution rate up to 1.25 mmol g-1h-1 under visible-light irradiation without stirring, which is even higher than that of the corresponding suspension COF-powder photocatalyst with stirring. In particular, the PAN/COF membrane photocatalyst demonstrates a much more superior hydrogen evolution stability and also a much better recyclability. This study gives some experience for the practical scaling application of solar-driven water splitting.

Selective Oxidation of 5-Hydroxymethyl Furfural Coupled with H2 Production over Surface Sulfur Vacancy-Rich Zn3In2S6/Bi2MoO6 Heterojunction Photocatalyst

The construction of heterojunctions and surface defects is a promising strategy for enhancing photocatalytic activity. A surface sulfur vacancy (VS)-rich Zn3In2S6/Bi2MoO6 heterojunction photocatalyst (ZIS-VS/BMO) was herein developed for the selective oxidation of biomass-derived 5-hydroxymethyl furfural (HMF) to value-added 2,5-diformylfuran (DFF) coupled with H2 production. The ZIS-VS/BMO heterojunction consisted of Bi2MoO6 (BMO) with preferentially exposed high-index (131) facets and VS-rich two-dimensional (2D) Zn3In2S6 (ZIS-VS) nanosheets with preferentially exposed high-index (102) facets. The directional transfer of light-driven electrons from BMO to ZIS-VS occurs in the heterojunction interface, as confirmed by an in situ irradiated XPS (ISI-XPS) measurement, which facilitates the electron-hole separation. The benefits of VS in activating HMF, suppressing overoxidation of DFF, and accelerating electron transport were disclosed by molecular simulation. ZIS-VS/BMO displays outstanding performance with a DFF yield of 74.1% and a DFF selectivity of 90%, as well as a rapid rate of H2 evolution. This research would help design highly efficient photocatalysts and develop a new technology for biomass resource utilization.

In-situ construction of direct Z-scheme NiO/Bi2MoO6 heterostructure arrays with enhanced room temperature ether sensing properties under visible light irradiation

Light irradiation has emerged as a promising strategy to promote room temperature sensing of resistive-type semiconductor gas sensors recently. However, high recombination rate of photo-generated carriers and poor visible light response of conventional semiconductor sensing materials have greatly limited the further performance improvement. It is urgent to develop gas sensing materials with high photo-generated carrier separation efficiency and excellent visible light response. Herein, a novel direct Z-scheme NiO/Bi₂MoO₆ heterostructure arrays were designed and in-situ constructed on alumina flat substrate to form thin film sensors, which realized excellent room temperature gas response towards ether under irradiation of visible light for the first time, together with excellent stability and selectivity. Based on density functional theory calculation and experimental characterization, it was demonstrated that the construction of Z-scheme heterostructure could greatly promote the separation of photo-generated carriers and adsorption of ether. Moreover, the excellent visible light response characteristics of NiO/Bi₂MoO₆ could improve the utilization of visible light. In addition, the in-situ construction of array structure could avoid a series of problems caused by the conventional thick film devices. The work not only provides a promising guideline for Z-scheme heterostructure arrays in promoting the room temperature sensing performance of semiconductors gas sensors under visible light irradiation, but also clarifies the gas sensing mechanism of Z-scheme heterostructure at the atomic and electronic level.

Assessment of the effective parameters for the enhancement of light-harvesting power in the photoelectrochemical microbial fuel cell

ABSTRACTPhoto-assisted microbial fuel cells (PMFCs) are novel bioelectrochemical systems that employ light to harvest bioelectricity and efficient contaminant reduction. In this study, the impact of different operational conditions on the electricity generation outputs in a photoelectrochemical double chamber configuration Microbial fuel cell using a highly useful photocathode are evaluated and their trends are compared with the photo reduction efficiency trends. As a photocathode, a binder-free photo electrode decorated with dispersed polyaniline nanofiber (PANI)-cadmium sulfide Quantum Dots (QDs) is prepared here to catalyse the chromium (VI) reduction reaction in a cathode chamber with an improvement in power generation performance. Bioelectricity generation is examined in various process conditions like photocathode materials, pH, initial concentration of catholyte, illumination intensity and time of illumination. Results show that, despite the harmful effect of the initial contaminant concentration on the reduction efficiency of the contaminant, this parameter exhibits a superior ability for improving the power generation efficiency in a Photo-MFC. Furthermore, the calculated power density under higher light irradiation intensity has experienced a significant increase, which is due to an increment in the number of photons produced and an increase in their chance of reaching the electrodes surface. On the other hand, additional results indicate that the power generation decreases with the rise of pH and has witnessed the same trend as the photo reduction efficiency.

Visible-light-driven photocatalytic degradation of tetracycline hydrochloride by Z-scheme Ag3PO4/1T@2H-MoS2 heterojunction: Degradation mechanism, toxicity assessment, and potential applications

Residual antibiotics in wastewater threaten living organisms and the ecosystem, while the photocatalytic process is recognized as one of the most eco-friendly and promising technologies for the treatment of antibiotic wastewater. In this study, a novel Z-scheme Ag₃PO₄/1T@2H-MoS₂ heterojunction was synthesized, characterized, and used for the visible-light-driven photocatalytic degradation of tetracycline hydrochloride (TCH). It was found that Ag₃PO₄/1T@2H-MoS₂ dosage and coexisting anions had significant effects on the degradation efficiency, which could reach up to 98.9 % within 10 min under the optimal condition. Combing experiments and theoretical calculations, the degradation pathway and mechanism were thoroughly investigated. The excellent photocatalytic property of Ag₃PO₄/1T@2H-MoS₂ was achieved attributed to the Z-scheme heterojunction structure, which remarkably inhibited the recombination of photoinduced electrons and holes. The potential toxicity and mutagenicity for TCH and generated intermediates were evaluated, which revealed the ecological toxicity of antibiotic wastewater was reduced effectively during the photocatalytic degradation process.

Photocatalytic activity of green synthesized cadmium sulfide quantum dots on the removal of RhB dye and its cytotoxicity and antibacterial studies

Presence of inorganic pollutants in water reservoirs is the treating factor for human health and environment. Semiconductor quantum dots (QDs) has been regarded as one of the most efficient nanoparticles for their enhanced photocatalytic activity. Medicinal plants are the safe sources to provide green template for biosynthesis of inorganic nanoparticles such as quantum dots. In order to determine the photocatalytic and biological application of cadmium sulfide quantum dots (CdS QDs), a biosynthesis approach was employed using saffron (Crocus sativus L.) stigma extract as the green reaction substrate. The biosynthesis process was evaluated at different pH condition to obtain the most efficient CdS QDs. Characterization of prepared CdS QDs were determined through UV-vis and fluorescence spectroscopy, FTIR and TEM analysis. The obtained results showed well dsispersed and uniform QDs during green synthesis at the optimum condition. The absorption and electrical properties of green synthesized CdS QDs showed the lowest energy bandgap of 2.4 at pH 11. Photocatalytic activity of CdS QDs on Rhodamine B degradation showed 92% degradation after 80 min under UV light irradiation. The antibacterial and cell cytotoxicity of green synthesized CdS QDs were assayed by disk diffusion and MTT assays respectively. Obtained results showed significant antibacterial effect of CdS QDs against gram-positive and gram-negative bacteria includingB. subtilis(90%) andE. coli(96%) respectively. Moreover, cytotoxicity of prepared CdS Qds through MTT assay indicated 79% apoptosis induction on MCF-7 breast cancer cells.

One-Step construction of Polyimide/NH2-UiO-66 heterojunction for enhanced photocatalytic degradation of sulfonamides

Photocatalysis treatment is a promising technology to eliminate water pollutants. Herein, we constructed polyimide/NH₂-UiO-66 composites (PUs) through a facile one-step solvothermal method for the photocatalytic degradation of sulfonamides. The optimized photocatalyst PU1.5 was superior to the photocatalysts prepared through multi-step methods due to the more exposed (001) facets of polyimide and the better distribution of small NH₂-UiO-66 particles. PU1.5 showed the highest photocatalytic activity, which was 9.5 and 92.0 times higher than that of polyimide and NH₂-UiO-66. Such improvement was attributed to the improved carrier separation efficiency resulted from direct Z-scheme heterojunction. The probable degradation pathway of sulfathiazole was proposed by the LC-MS/MS and Density Functional Theory (DFT) calculation. Furthermore, the reduced toxicity and the little antibacterial activity of intermediates was investigated by the Quantitative Structure-Activity Relationship (QSAR) analysis and the residual antibiotic activity experiment. The study might provide a new strategy for designing composite photocatalyst to achieve efficient removal of pollutants.