Polishing micropollutants in municipal wastewater, using biogenic manganese oxides in a moving bed biofilm reactor (BioMn-MBBR)

Structure and molecular-level transformation for oxidation of effluent organic matters by manganese oxides

As important organic components in water environments, effluent organic matters (EfOMs) from wastewater treatment plants are widely present in Mn-rich environments or engineered treatment systems. The redox interaction between manganese oxides (MnOx) and EfOMs can lead to their structural changes, which are crucial for ensuring the safety of water environments. Herein, the reactivities of MnOx with EfOMs were evaluated, and it was found that MnOx with high specific surface area, active high-valent manganese content and lattice oxygen content (i.e., amorphous MnO2) possessed stronger oxidizing ability towards EfOMs. Accompanying by EfOMs oxidation, Mn(IV) and Mn(III) were reduced into Mn(II), with Mn(III) as the significant active species. Through molecular-level transformation analysis by ultrahigh mass spectrometry (FT-ICR MS), the highly reactive compounds in EfOMs were clearly determined to be that with more aromatic and unsaturated structures, especially lignin-like compounds (the highest content in EfOMs (over 60 %)). EfOMs were oxidized by amorphous MnO2 into products with lower humification index (0.60 vs. 0.46), smaller apparent molecular weight (386.94 Da vs. 368.68 Da), and higher biodegradability (BOD5/COD: 0.12 vs. 0.78). This finding suggested that redox reactions between MnOx and EfOMs might alter their abiotic and biotic behaviors in receiving water environments.

Study on the performance of a new type of combined packing biofilm reactor treating wastewater

The present work investigates the performance of a biofilm reactor filled with a new type of combined packing used to treat wastewater and explores a new technology approach for the application of coral sand and waste non-woven fabric. The combined packing was made of coral sand and waste non-woven fabric, which was used as a biofilm carrier to treat sewage. The experimental results showed that the removal efficiencies of COD, NH4+-N and TN in the biofilm reactor containing the combined packing were 92.9%, 72.9% and 63.2%, respectively. The maximum removal efficiencies of COD, NH4+-N and TN in the biofilm reactor containing single packing were 89.0%, 63.4% and 55.2%, respectively. The properties of the combined packing were characterized by Fourier Transform Infrared (FTIR), specific surface area, SEM and dehydrogenase activity. Infrared analysis showed that there were hydroxyl, carboxyl and carbonyl groups on the surface of coral sand and non-woven fabric which were beneficial for biofilm growth and wastewater treatment. The large pores in the interior of coral sand and non-woven fabric could provide a comfortable environment for microbes to grow and reproduce. The dehydrogenase activity of the biofilm on the surface of coral sand in the third biofilm reactor was 49.91 μgTF·g-1·h-1, which was significantly higher than that of the other two biofilm reactors. The new type of combined packing is suitable for biofilm carriers with low cost, which can be applied to actual sewage treatment projects. This study provides a reference for the practical application of the technique.

Activation of peracetic acid by electrodes using biogenic electrons: A novel energy- and catalyst-free process to eliminate pharmaceuticals

Peracetic acid (PAA) has received increasing attention as an alternative oxidant for wastewater treatment. However, existing processes for PAA activation to generate reactive species typically require external energy input (e.g., electrically and UV-mediated activation) or catalysts (e.g., Co2+), inevitably increasing treatment costs or introducing potential new contaminants that necessitate additional removal. In this work, we developed a catalyst-free, self-sustaining bioelectrochemical approach within a two-chamber bioelectrochemical system (BES), where a cathode electrode in-situ activates PAA using renewable biogenic electrons generated by anodic exoelectrogens (e.g., Geobacter) degrading biodegradable organic matter (e.g., acetic acid) in wastewater at the anode. This innovative BES-PAA technique achieved 98 % and 81 % removal of 2 µM sulfamethoxazole (SMX) in two hours at pH 2 (cation exchange membrane) and pH 6 (bipolar membrane) using 100 μM PAA without external voltage. Mechanistic studies, including radical quenching, molecular probe validation, electron spin resonance (ESR) experiments, and density functional theory (DFT) calculations, revealed that SMX degradation was driven by reactive species generated via biogenic electron-mediated OO cleavage of PAA, with CH3C(O)OO• contributing 68.1 %, •OH of 18.4 %, and CH3C(O)O• of 9.4 %, where initial formation of •OH and CH3C(O)O• rapidly reacts with PAA to produce CH3C(O)OO•. The presence of common water constituents such as anions (e.g., Cl-, NO3-, and H2PO4-) and humic acid (HA) significantly hinders SMX removal via the BES-PAA technique, whereas CO32- and HCO3- ions have a comparatively minor impact. Additionally, the study investigated the removal of various pharmaceuticals present in secondary treated municipal wastewater, attributing differences in removal efficiency to the selective action of CH3C(O)OO•. This research demonstrates a novel PAA activation method that is ecologically benign, inexpensive, and capable of overcoming catalyst deactivation and secondary pollution issues.

Characteristic and mechanism of biological nitrogen and phosphorus removal facilitated by biogenic manganese oxides (BioMnOx) at various concentrations of Mn(II)

Biogenic manganese oxides (BioMnOx) have attracted considerable attention as active oxidants, adsorbents, and catalysts. However, characteristics and mechanisms of nitrification-denitrification in biological redox reactions mediated by different concentrations of BioMnOx are still unclear. Fate of nutrients (e.g., NH4+-N, TP, NO3--N) and COD were investigated through different concentrations of BioMnOx produced by Mn(II) in the moving bed biofilm reactor (MBBR). 34% and 89.2%, 37.8% and 89.8%, 57.3% and 88.9%, and 62.1% and 90.4% of TN and COD by MBBR were synchronously removed in four phases, respectively. The result suggested that Mn(II) significantly improved the performance of simultaneous nitrification and denitrification (SND) and TP removal based on manganese (Mn) redox cycling. Characteristics of glutathione peroxidase (GSH-Px), reactive oxygen species (ROS), and electron transfer system activity (ETSA) were discussed, demonstrating that ROS accumulation reduced the ETSA and GSH-Px activities when Mn(II) concentration increased. Extracellular polymeric substance (EPS) function and metabolic pathway of Mn(II) were explored. Furthermore, effect of cellular components on denitrification was evaluated including BioMnOx performances, indicating that Mn(II) promoted the non-enzymatic action of cell fragments. Finally, mechanism of nitrification and denitrification, denitrifying phosphorus and Mn removal was further elucidated through X-ray photoelectron spectroscopy (XPS), high throughput sequencing, and fourier transform infrared reflection (FTIR). This results can bringing new vision for controlling nutrient pollution in redox process of Mn(II).

Biological Oxygen-dosed Activated Carbon (BODAC) filters - A bioprocess for ultrapure water production removing organics, nutrients and micropollutants

Biological oxygen-dosed activated carbon (BODAC) filters in an Ultrapure water plant were demonstrated to have the potential to further treat secondary wastewater treatment effluent. The BODAC filters were operated for 11 years without carbon regeneration or replacement, while still functioning as pre-treatment step to reverse osmosis (RO) membranes by actively removing organic micropollutants (OMPs) and foulants. In this study, the removal of nutrients and 13 OMPs from secondary wastewater treatment effluent was investigated for 2 years and simultaneously, the granules' characterization and microbial community analysis were conducted to gain insights behind the stable long-term operation of the BODAC filters. The results showed that the BODAC granules' surface area was reduced by ∼70 % of what is in virgin carbon granules and covered by biofilm and inorganic depositions. The BODAC filters reduced the concentration of soluble organics, mainly proteins, performed as an effective nitrification system, and almost completely removed manganese. During the 2 years of observation, the filters consistently removed some OMPs such as hydrochlorothiazide, metoprolol, sotalol, and trimethoprim by at least 70 %. Finally, through microbial community analysis, we found that nitrifying and manganese-oxidizing bacteria were detected in high relative abundance on BODAC granules, supporting BODAC performance in removing OMPs and manganese as well as converting nitrogenous species in the water.

Application of manganese oxides in wastewater treatment: Biogeochemical Mn cycling driven by bacteria

Manganese oxides (MnOx) are recognized as a strongest oxidant and adsorbent, of which composites have been proved to be effective in the removal of contaminants from wastewater. This review provides a comprehensive analysis of Mn biochemistry in water environment including Mn oxidation and Mn reduction. The recent research on the application of MnOx in the wastewater treatment was summarized, including the involvement of organic micropollutant degradation, the transformation of nitrogen and phosphorus, the fate of sulfur and the methane mitigation. In addition to the adsorption capacity, the Mn cycling mediated by Mn(II) oxidizing bacteria and Mn(IV) reducing bacteria is the driving force for the MnOx utilization. The common category, characteristics and functions of Mn microorganisms in recent studies were also reviewed. Finally, the discussion on the influence factors, microbial response, reaction mechanism and potential risk of MnOx application in pollutants' transformation were proposed, which might be the promising opportunities for the future investigation of MnOx application in wastewater treatment.

A review: Manganese-driven bioprocess for simultaneous removal of nitrogen and organic contaminants from polluted waters

Water pollutants, such as nitrate and organics have received much attention for their harms to ecological environment and human health. The redox transformation between Mn(Ⅱ) and Mn(Ⅳ) for nitrogen and organics removal have been recognized for a long time. Mn(Ⅱ) can act as inorganic electron donor to drive autotrophic denitrification so as to realize simultaneous removal of Mn(Ⅱ), nitrate and organic pollutants. Mn oxides (MnOx) also play an important role in the adsorption and degradation of some organic contaminants and they can change or create new oxidation pathways in the nitrogen cycle. Herein, this paper provides a comprehensive review of nitrogen and organic contaminants removal pathways through applying Mn(Ⅱ) or MnOx as forerunners. The main current knowledge, developments and applications, pollutants removal efficiency, as well as microbiology and biochemistry mechanisms are summarized. Also reviewed the effects of factors such as the carbon source, the environmental factors and operation conditions have on the process. Research gaps and application potential are further proposed and discussed. Overall, Mn-based biotechnology towards advanced wastewater treatment has a promising prospect, which can achieve simultaneous removal of nitrogen and organic contaminants, and minimize sludge production.

Synthesis of biochar-CoFe2O4 nanocomposite for adsorption of methylparaben from wastewater under full factorial experimental design

The presence of endocrine-disrupting chemicals in municipal wastewater has emerged as a threat to human health and the environment. Therefore, this study aimed to develop biochar-cobalt ferrite (BCF) nanocomposite for the removal of methylparaben from water under the full factorial experimental design of 4 factors with 3 levels (3⁴). The biochar-CoFe₂O₄ nanocomposite was developed by co-precipitation method from cobalt ferrite and biochar of Eucalyptus tree bark. Adsorbent surface morphology and functional and elemental composition were carried out by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray spectroscopy (EDS) techniques which showed the presence of cracks with a rough surface, reasonable surface chemical composition, and many chemical functional groups, respectively. The experimental and predicted adsorption efficiencies ranged from 25.3 to 85.6% and 21.8 to 80.3%, respectively. The maximum adsorption performance (85.6%) reduced the methylparaben concentration from 27.5 to 4.0 mg/L at the optimum condition of adsorbent dose of 55 mg/100 mL, pH 6, contact time 90 min, and the initial methylparaben concentration of 27.5 mg/L. However, the adsorbent dose was the most influential main factor whereas the least influential was the interaction between solution pH and contact time under the regression model. The model also showed that 69% methylparaben removal was described by the regression model. The experimental data best fitted with the Freundlich model indicate multilayer adsorption which is the implication of physisorption. The sorption mechanism is attributed to Vander Waals forces, H-bonding, and dipole interaction. This BCF nanocomposite adsorbent appears to be promising for the removal of methylparaben from wastewater, but a further optimization process is essential to boost the treatment performance.

Metagenomic insights into microbial nitrogen metabolism in two-stage anoxic/oxic-moving bed biofilm reactor system with multiple chambers for municipal wastewater treatment

To explore the microbial nitrogen metabolism of a two-stage anoxic/oxic (A/O)-moving bed biofilm reactor (MBBR), biofilms of the system's chambers were analyzed using metagenomic sequencing. Significant differences in microbial populations were found among the pre-anoxic, oxic and post-anoxic MBBRs (P < 0.01). Nitrospira and Nitrosomonas had positive correlations with ammonia nitrogen (NH₄⁺-N) removal, and were also predominant in oxic MBBRs. These organisms were the hosts of functional genes for nitrification. The denitrifying genera were predominant in anoxic MBBRs, including Thiobacillus and Sulfurisoma in pre-anoxic MBBRs and Dechloromonas and Thauera in post-anoxic MBBRs. The four genera had positive correlations with total nitrate and nitrite nitrogen (NO_X^--N) removal and were the hosts of functional genes for denitrification. Specific functional biofilms with different microbial nitrogen metabolisms were formed in each chamber of this system. This work provides a microbial theoretical support for the two-stage A/O-MBBR system.

Insight into the role of biogenic manganese oxides-assisted gravity-driven membrane filtration systems toward emerging contaminants removal

Effective water purification technologies are required to remove emerging contaminants (ECs) and prevent their extensive occurrence in rural areas. In this work, coupling gravity-driven membrane (GDM) filtration with biogenic manganese oxides (BioMnOx) in the biofouling layer was utilized for treating water containing SMX. Comparisons between BioMnOx-GDM (with BioMnOx) and Control-GDM (without BioMnOx) indicated that BioMnOx could significantly promote the removal of DOC, NH₄⁺-N, and fluorescent pollutants due to its strong oxidating capacity and high biological activity. The formation of BioMnOx increased the abundance of SMX-degrading bacteria, enriched the metabolic pathway and mineralization rate of SMX, and effectively promoted the remove of SMX. More importantly, BioMnOx facilitated the removal of antibiotic resistance genes (ARGs) in the GDM, because it increased the link between microorganisms and reduced the concentration of SMX, thus reduced the expression of ARGs. LB-EPS played an important role in the membrane fouling. Compared with the Control-GDM, the concentration of LB-EPS in BioMnOx-GDM decreased, which was beneficial to alleviate membrane fouling. Although a thicker biofouling layer (1774.88 μm vs.775.54 μm) was formed in BioMnOx-GDM, the biofilm with higher porosity (64.93% vs. 41.24%) had a more positive effect on the flux. Overall, BioMnOx could improve the pollutant removal and stable flux level of the GDM system. BioMnOx-GDM effectively avoided the risks brought by ECs and ensured water safety in rural areas.

Manganese oxidation and prokaryotic community analysis in a polycaprolactone-packed aerated biofilm reactor operated under seawater conditions

Biogenic manganese oxides (BioMnOx) have been receiving increasing attention for the removal of environmental contaminants and recovery of minor metals from water environments. However, the enrichment of heterotrophic Mn(II)-oxidizing microorganisms for BioMnOx production in the presence of fast-growing coexisting heterotrophs is challenging. In our previous work, we revealed that polycaprolactone (PCL), a biodegradable aliphatic polyester, can serve as an effective solid organic substrate to enrich Mn-oxidizing microbial communities under seawater conditions. However, marine BioMnOx-producing bioreactor systems utilizing PCL have not yet been established. Therefore, a laboratory-scale continuous-flow PCL-packed aerated biofilm (PAB) reactor was operated for 238 days to evaluate its feasibility for BioMnOx production under seawater conditions. After the start-up of the reactor, the average dissolved Mn removal rates of 0.4-2.3 mg/L/day, likely caused by Mn(II) oxidation, were confirmed under different influent dissolved Mn concentrations (2.5-14.0 mg/L on average) and theoretical hydraulic retention time (0.19-0.77 day) conditions. The 16S rRNA gene amplicon sequencing analysis suggested the presence of putative Mn(II)-oxidizing and PCL-degrading bacterial lineages in the reactor. Two highly dominant operational units (OTUs) in the packed PCL-associated biofilm were assigned to the genera Marinobacter and Pseudohoeflea, whereas the genus Lewinella and unclassified Alphaproteobacteria OTUs were highly dominant in the MnOx-containing black/dark brown precipitate-associated biofilm formed in the reactor. Excitation-emission matrix fluorescence spectroscopy analysis revealed the production of tyrosine- and tryptophane-like components, which may serve as soluble heterotrophic organic substrates in the reactor. Our findings indicate that PAB reactors are potentially applicable to BioMnOx production under seawater conditions.

Fate, elimination, and simulation of low-molecular-weight micropollutants in an integrated activated carbon-fertiliser drawn osmotic membrane bioreactor

This study investigated the behaviour and simulation of low-molecular-weight (low-MW) micropollutants (MPs) in a powdered activated carbon (PAC)-assisted fertiliser-drawn OMBR. 10% increase in water recovery and two times thinner fouling layer were observed in OMBR with addition of 100 mg-PAC/g-MLSS. This amount of PAC also boosted the richness and diversity in microbial community (Chao1 and Shannon index increased 1.5 times). Nearly 100% low-MW MPs were eliminated in PAC-OMBR, while 2-80% was achieved with traditional OMBR. This reduced the pathway of low-MW MPs into diluted fertiliser from 47% to < 1% of the total influent mass. Hydrophilicity played the crucial role in the removal of low-MW MPs, especially acetaminophen and nonylphenol. Neural network was suitable for the simulation of MP behaviour with high accuracy (R = 0.98, RMSE = 4.7%). The findings support safer and cleaner use of the diluted fertiliser and promote a cost-effective tool for real-time analysis of MP behaviour.