Bacterial diversity and competitors for degradation of hazardous oil refining waste under selective pressures of temperature and oxygen

Mechanisms of microbial diversity modulation of mineral black clay to achieve ecological restoration of open-pit mine dump

The harsh climatic conditions and severe scarcity of surface soil present significant challenges to ecological restoration in open-pit mine dumps within China's type II plant cold resistance zone. To address the topsoil shortage, mineral black clay was used to create synthetic soil. This study explored the application of an ecological restoration bacteria (ERB) consortium to accelerate the ecological restoration of synthetic soil-covered areas by enhancing soil ecosystem construction. The results demonstrated that ERB significantly influenced the native bacterial community structure in mixed black clay. Specifically, ERB disrupted the inhibitory effects of the Actinobacterota phylum on the development of native bacterial diversity, leading to an increase in unclassified_o_Solirubrobacterales sp., norank_f_norank_o_norank_c_KD4-96 sp., Sphingomonas sp., Luteitalea sp., norank_f_Vicinamibacteraceae sp., and other aerobic and anaerobic bacteria. These alterations in soil microbial structure directly impacted soil composition and vegetation diversity. The plant diversity survey and metabolomics analysis revealed that the reduction of harmful substances, such as HPED, HODE, and HOME, in black clay soil improved the growth and distribution of Salsola collina Pall. and Medicago sativa L. This increase facilitated the cycling of key nutrients, such as nitrogen (N) and phosphorus (P), and promoted the establishment of symbiotic relationships between plants, microorganisms, and soil. Ultimately, the ecological remediation of the synthetic soil was achieved through the synergistic effects of ERB, which included the degradation of inhibitory soil components, enhanced nutrient consumption by microbiota and plants, and the overall promotion of ecosystem stability in the reclamation area.

Enrichment of microbial consortia for MEOR in crude oil phase of reservoir-produced liquid and their response to environmental disturbance

Developing microbial consortiums is necessary for microbial enhanced oil recovery (MEOR) in heavy crude oil production. The aqueous phase of produced fluid has long been considered an ideal source of microorganisms for MEOR. However, it is recently found that rich microorganisms (including hydrocarbon-degrading bacteria) are present in the crude oil phase, which is completely different from the aqueous phase of produced fluid. So, in this study, the microbial consortia from the crude oil phase of produced fluids derived from four wells were enriched, respectively. The microbial community structure during passage was dynamically tracked, and the response of enriched consortia to successive disturbance of environmental factors was investigated. The results showed the crude oil phase had high microbial diversity, and the original microbial community structure from four wells was significantly different. After ten generations of consecutive enrichment, different genera were observed in the four enriched microbial consortia, namely, Geobacillus, Bacillus, Brevibacillus, Chelativorans, Ureibacillus, and Ornithinicoccus. In addition, two enriched consortia (eG1614 and eP30) exhibited robustness to temperature and oxygen perturbations. These results further suggested that the crude oil phase of produced fluids can serve as a potential microbial source for MEOR.

The influence of benzene on the composition, diversity and performance of the anodic bacterial community in glucose-fed microbial fuel cells

Bioelectrochemical systems offer unique opportunities to remove recalcitrant environmental pollutants in a net positive energy process, although it remains challenging because of the toxic character of such compounds. In this study, microbial fuel cell (MFC) technology was applied to investigate the benzene degradation process for more than 160 days, where glucose was used as a co-metabolite and a control. We have applied an inoculation strategy that led to the development of 10 individual microbial communities. The electrochemical dynamics of MFC efficiency was observed, along with their 1H NMR metabolic fingerprints and analysis of the microbial community. The highest power density of 120 mW/m2 was recorded in the final period of the experiment when benzene/glucose was used as fuel. This is the highest value reported in a benzene/co-substrate system. Metabolite analysis confirmed the full removal of benzene, while the dominance of fermentation products indicated the strong occurrence of non-electrogenic reactions. Based on 16S rRNA gene amplicon sequencing, bacterial community analysis revealed several petroleum-degrading microorganisms, electroactive species and biosurfactant producers. The dominant species were recognised as Citrobacter freundii and Arcobacter faecis. Strong, positive impact of the presence of benzene on the alpha diversity was recorded, underlining the high complexity of the bioelectrochemically supported degradation of petroleum compounds. This study reveals the importance of supporting the bioelectrochemical degradation process with auxiliary substrates and inoculation strategies that allow the communities to reach sufficient diversity to improve the power output and degradation efficiency in MFCs beyond the previously known limits. This study, for the first time, provides an outlook on the syntrophic activity of biosurfactant producers and petroleum degraders towards the efficient removal and conversion of recalcitrant hydrophobic compounds into electricity in MFCs.

Enhanced bioremediation of cyclohexaneacetic acid in offshore sediments with green synthetic iron oxide and Pseudoalteromonas sp

Naphthenic acids (NAs) have been found to exert serious threats on offshore sediment ecosystems and human health in recent years, which entails us the urgent need for NAs remediation. Bioremediation is considered an ideal method for sediment remediation due to ecological sustainability and economic feasibility. However, current bioremediation efficiency of offshore sediments suffers from relatively slow and there has never any attempts to bioremediate offshore sediment NAs contamination hitherto. In this study, the green synthetic iron oxides (gFeOx) based on Laminaria extracts was employed to enhance the biodegradation of NAs (Cyclohexylacetic acid, CHAA) in offshore sediments by Pseudoalteromonas sp. JSTW (an indigenous microorganism). The results showed that CHAA (20 mg·kg-1) in offshore sediments was removed almost 100% within 7 days at 30 mg·kg-1 gFeOx and 0.6 mg·kg-1 Strain JSTW. High-throughput sequencing results revealed that the structure and function of sediment microbial community were essentially restored to uncontaminated levels after bioremediation, highlighting the joint remediation approach is an efficient and eco-friendly method. Overall, this work has firstly provided insights into the application for NAs in situ bioremediation in offshore sediments.

The methods for improving the biodegradability of oily sludge: a critical review

Biological degradation method, as an environmentally friendly, low-carbon, and clean pollution treatment technology, is widely used for the harmless disposal of oily sludge. The biodegradability of oily sludge with stable emulsification system, high oil, and water content is poor. Therefore, it is necessary to pre-treat the oily sludge to improve its biodegradability, including recover the petroleum resources and remove heavy metals and bio-toxic organic matters. This review systematically summarizes five oily sludge treatment methods and their influences on sludge biodegradability, including pyrolysis, chemical hot washing, solvent extraction, chemical oxidation, and hydrothermal. Pyrolysis at temperatures above 750 °C produces high molecular weight polycyclic aromatic hydrocarbons, chemical hot washing and chemical oxidation would cause secondary pollution, solvent extraction method could not be applied due to the high cost and high toxicity of the extractant, and the oil removal of hydrothermal method is inefficient. Additionally, the principles, advantages, and disadvantages of those treatments and the factors affecting microbial degradation were analyzed, which provide the development direction of pretreatment technology to improve the biodegradability of oily sludge.

High-value utilisation of PGM-containing residual oil: Recovery of inorganic acids, potassium, and PGMs using a zero-waste approach

Residual oil containing platinum group metals (PGMs), which is under-researched, can easily pose resource waste and environmental risks. PGMs feature as scarce strategic metals, and inorganic acids and potassium salts are also considered valuable. An integrated process for the harmless treatment and recovery of useful resources from residual oil is proposed herein. This work developed a zero-waste process based on the study of the main components and characteristics of the PGM-containing residual oil. The process consists of three modules: pre-treatment for phase separation, liquid-phase resource utilisation, and solid-phase resource utilisation. Separating the residual oil into liquid and solid phases allows for the maximum recovery of valuable components. However, concerns about the accurate determination of valued components emerged. Findings revealed that Fe and Ni are highly susceptible to spectral interference in the PGMs test when using the inductively coupled plasma method. After studying 26 PGM emission lines, Ir 212.681 nm, Pd 342.124 nm, Pt 299.797 nm, and Rh 343.489 nm were reliably identified. Finally, formic acid (81.5 g/t), acetic acid (117.2 kg/t), propionic acid (291.9 kg/t), butyric acid (3.6 kg/t), potassium salt (553.3 kg/t), Ir (27.8 g/t), Pd (10960.0 g/t), Pt (193.1 g/t), and Rh (109.8 g/t) were successfully obtained from the PGM-containing residual oil. This study provides a helpful reference for the determination of PGM concentrations and high-value utilisation of PGM-containing residual oil.

Medium-chain alkane biodegradation and its link to some unifying attributes of alkB genes diversity

Hydrocarbon footprints in the environment, via biosynthesis, natural seepage, anthropogenic activities and accidents, affect the ecosystem and induce a shift in the healthy biogeochemical equilibrium that drives needed ecological services. In addition, these imbalances cause human diseases and reduce animal and microorganism diversity. Microbial bioremediation, which capitalizes on functional genes, is a sustainable mitigation option for cleaning hydrocarbon-impacted environments. This review focuses on the bacterial alkB functional gene, which codes for a non-heme di‑iron monooxygenase (AlkB) with a di‑iron active site that catalyzes C₈-C₁₆ medium-chain alkane metabolism. These enzymes are ubiquitous and share common attributes such as being controlled by global transcriptional regulators, being a component of most super hydrocarbon degraders, and their distributions linked to horizontal gene transfer (HGT) events. The phylogenetic approach used in the HGT detection suggests that AlkB tree topology clusters bacteria functionally and that a preferential gradient dictates gene distribution. The alkB gene also acts as a biomarker for bioremediation, although it is found in pristine environments and absent in some hydrocarbon degraders. For instance, a quantitative molecular method has failed to link alkB copy number to contamination concentration levels. This limitation may be due to AlkB homologues, which have other functions besides n-alkane assimilation. Thus, this review, which focuses on Pseudomonas putida GPo1 alkB, shows that AlkB proteins are diverse but have some unifying trends around hydrocarbon-degrading bacteria; it is erroneous to rely on alkB detection alone as a monitoring parameter for hydrocarbon degradation, alkB gene distribution are preferentially distributed among bacteria, and the plausible explanation for AlkB affiliation to broad-spectrum metabolism of hydrocarbons in super-degraders hitherto reported. Overall, this review provides a broad perspective of the ecology of alkB-carrying bacteria and their directed biodegradation pathways.

Response of aerobic activated sludge to edible oil exposure: Extracellular polymeric substance (EPS) characteristics and microbial community

Aerobic activated sludge is widely used to degrade edible oil wastewater in wastewater treatment plants. During this process, the observed poor organics removal performance might be caused by poor sludge settling performance, which might be influenced by extracellular polymeric substances (EPS) and the structure of the microbial community. However, this hypothesis was not confirmed. Thus, this study investigated the response of activated sludge to 50% and 100% edible oil exposure in comparison to glucose, focusing on organics removal performance, characteristics of sludge, EPS, and microbial community structure. Results showed that both concentrations of edible oil influenced the systems' performance, although 100% edible oil showed more significant negative effects than 50% edible oil. The mechanisms behind the influence of edible oil on the aerobic activated sludge system and the differences between the different concentrations of edible oil were revealed. The worse system performance in the edible oil exposure system was due to the worse sludge settling performance, which was significantly affected by edible oil (p < 0.05). The sludge settling performance was mainly inhibited by promoting the formation of floating particles and the enrichment of filamentous bacteria in the 50% edible oil exposure system; biosurfactant secretion was also speculated as the reason, in addition to the above factors, in the 100% edible oil exposure system. The macroscopic largest floating particles, highest total relative abundance of foaming bacteria and biosurfactant production genera (34.32%), lowest surface tension (43.7 mN/m), and highest emulsifying activity (E₂₄ = 25%) of EPS in 100% edible oil exposure systems provide strong evidence.

Genetic and functional characterization of multiple thermophilic organosulfur-removal systems reveals desulfurization potentials for waste residue oil cleaning

Heavy oil and petroleum refining residues usually contain high concentrations of recalcitrant hazardous organosulfur compounds, causing long-term serious global environmental pollution during leakage and combustion. Research conducted here identified a unique thermophilic bacterium Parageobacillus thermoglucosidasius W-36 with the notable ability of waste residue oil desulfurization, utilization and tolerance of multiplex hazardous organosulfur pollutants. Genome information mining revealed multiple desulfurization systems in three organosulfur-utilizing gene clusters. Enzymatic characterization, phylogenetic relationships, transcriptional performance and structural prediction indicated four novel key monooxygenases for diverse organosulfur removal. Importantly, all monooxygenases shared obvious commonalities in the predicted tertiary structure backbone and catalytic characteristics of C-S bond cleavage, implying the potential of genetic engineering for broad-spectrum hazardous organosulfur removal. Therefore, this work demonstrated the important application potential of thermophilic bacteria as a promising alternative biodesulfurization way for waste residue oil cleaning.

Soil treatment using a biosurfactant producing bacterial consortium in rice fields contaminated with oily sludge- a sustainable approach

A consortium of two biosurfactant-producing bacteria (Bacillus pumilus KS2 and Bacillus cereus R2) was developed to remediate petroleum hydrocarbon-contaminated paddy soil. Soil samples from a heavily contaminated rice field near Assam's Lakwa oilfield were collected and placed in earthen pots for treatment. After each month of incubation, 50 g of soil from each earthen pot was collected, and the soil TPH (ppm) in each sample was determined. The extracted TPH samples were analysed by Gas chromatography-mass spectrometry (GC-MS) to confirm microbial degradation. The soil samples were examined for changes in pH, conductivity, total organic content (TOC), water holding capacity, and total nitrogen content in addition to TPH degradation. An increasing trend in TPH degradation was observed with each passing month. After six months of treatment, the sample with the lowest initial TPH concentration (1735 ppm) had the highest degradation (91.24%), while the soil with the highest amount of TPH (5780 ppm) had the lowest degradation (74.35%). A wide range of aliphatic hydrocarbons found in soil samples was degraded by the bacterial consortium. The soil samples contained eight different low- and high-molecular-weight PAHs. Some were fully mineralized, while others were significantly reduced. With the decrease in the TPH level in the polluted soil, a significant improvement in the soil's physicochemical qualities (such as pH, electrical conductivity, total organic content, and water-holding capacity) was observed.

The viability of spores is the key factor for microbial induced calcium carbonate precipitation

While previous studies mainly focused on the total number of spores as an index to predict the calcium precipitation activity (CPA) of bacterial strains, the effect of viability of spores on microbial-induced calcium precipitation (MICP) has remained highly ignored. Therefore, for the first time, we have attempted to optimize the sporulation process in terms of viable spore production and, most importantly, aimed to build a correlation between viable spores and CPA. The results have shown that for the sporulation of Bacillus sp. H4, starch and peptone are the optimal carbon and nitrogen sources, respectively. One gram per liter of sodium chloride promotes CPA and production of viable spores, whereas an increase of sodium chloride concentration beyond 8 g L^-1 significantly reduces CPA without reducing the quantity of viable spores. Exogenous conditions such as seed age, inoculation quantity, and liquid volume only pose slight influence on the sporulation and CPA. Conclusively, the spores produced under optimized conditions are more morphologically uniform and display a 20% increase in CPA compared to pre-optimized spores. Furthermore, by combining the results of heatmap analysis, it can be concluded that not only the quantity, but also the quality of viable spores is important for bacterial strain to develop high CPA and effective MICP process. This study sheds light on the breadth of biomineralization activity based on viable spores and is an imperative step toward the intelligible design of MICP-based engineering solutions. KEY POINTS: • Viability of spores is a key controlling factor in calcium precipitation activity (CPA). • Spores produced under optimized conditions display a 20% increase in CPA. • Quality of viable spores is imperative for bacterial strains to develop high CPA.

Groups of Geomicrobiological Indicators Are Spread across Gas-Hydrate and Non-Gas-Hydrate Areas in the Northern Part of the Sea of Japan

The bioindication of oil and gas fields is a field of geomicrobiology that is mainly devoted to the detection of hydrocarbon-oxidizing microbial indicator species or functional genes in total DNA. However, it appears promising to use the physiological properties of microorganisms detection deposit type of hydrocarbons, in particular their ability to oxidize hydrocarbons under aerobic and anaerobic conditions. In this study, the most promising approach in this area was the method used for assessing the anaerobic degradation of hydrocarbons. When comparing molecular genetics and cultured methods of bioindication, it can be concluded that molecular biomarkers of functional genes for the anaerobic destruction of hydrocarbons (masD) make it possible to separate areas with traditional and gas-hydrate types of deposits. Using cultured methods, we found that representatives of the Nocardiaceae family of the phylum Actinomycetota were tied to the areas where gas hydrates were found. The ability of aerobic and facultative anaerobic hydrocarbon-oxidizing microorganisms to anaerobically utilize hydrocarbons was determined with cultured methods. For the first time, this ability was revealed for the genera Stenotrophomonas, Psychrobacter, Micrococcus and Peribacillus. The wide distribution of this ability that we found in strains isolated from both study regions suggests its prominent role in the destruction of hydrocarbons in marine sediments.

Biotreatment of oily sludge by a bacterial consortium: Effect of bioprocess conditions on biodegradation efficiency and bacterial community structure

We studied the biodegradation of oily sludge generated by a petroleum plant in Bahrain by a bacterial consortium (termed as AK6) under different bioprocess conditions. Biodegradation of petroleum hydrocarbons in oily sludge (C₁₁-C₂₉) increased from 24% after two days to 99% after 9 days of incubation in cultures containing 5% (w/v) of oily sludge at 40°C. When the nitrogen source was excluded from the batch cultures, hydrocarbon biodegradation dropped to 45% within 7 days. The hydrocarbon biodegradation decreased also by increasing the salinity to 3% and the temperature above 40°C. AK6 tolerated up to 50% (w/v) oily sludge and degraded 60% of the dichloromethane-extractable oil fraction. Illumina-MiSeq analyses revealed that the AK6 consortium was mainly composed of Gammaproteobacteria (ca. 98% of total sequences), with most sequences belonging to Klebsiella (77.6% of total sequences), Enterobacter (16.7%) and Salmonella (5%). Prominent shifts in the bacterial composition of the consortium were observed when the temperature and initial sludge concentration increased, and the nitrogen source was excluded, favoring sequences belonging to Pseudomonas and Stenotrophomonas. The AK6 consortium is endowed with a strong oily sludge tolerance and biodegradation capability under different bioprocess conditions, where Pseudomonas spp. appear to be crucial for hydrocarbon biodegradation.

A new method for screening and culture of Clostridium from pit mud under non-anaerobic conditions

Strong-flavor Baijiu (SFB) is produced in complex fermentation in pits under ground. Clostridium producing hexanoic acid plays a key role in the flavor formation of SFB. The screening and culture for Clostridium are very difficult because of its strict anaerobic characteristics. In this study, electric field assisted screening (EFAS) was used to screen Clostridium from pit mud, and electric culture (EC) was used to cultivate Clostridium under non-anaerobic conditions. A strain with a high yield of hexanoic acid was screened and named as Clostridium sp. EFAS6. Under non-anaerobic conditions, it grew rapidly only near the cathode end in the EFAS device because of the low oxidation-reduction potential of that electrode. In the experiment of high-density culture in the EC device, the cell concentration reached 10⁶-10⁷. After energy consumption was calculated, the optimal loading voltage was found to be 10 V. In the application, the broth of Clostridium sp. EFAS6 increased the content of ethyl hexanoic in SFB. Under non-anaerobic conditions, the anaerobe was screened by EFAS and cultivated in high density by EC. The EFAS and EC could also be used for the screening and culture of other anaerobes under non-anaerobic conditions.