Insight into UV-induced simultaneous photocatalytic degradation of Ti3C2Tx MXene and reduction of U(VI)

Insights into enhanced immobilization of uranyl carbonate from seawater by Fe-doped MXene

Extracting uranium from seawater not only reduces radioactive contamination in seawater but also provides a source of uranium energy. However, due to the low concentration of uranium in seawater and the high salinity of seawater, extraction of uranium from seawater is challenging. In this work, we demonstrated a simple strategy to synthesize Fe-doped MXene (Fe@Ti3C2Tx) via a hydrothermal method and applied for uranium enrichment in seawater. The Fe@Ti3C2Tx exhibited excellent adsorption performance in high salinity environments. The removal capacity of Fe@Ti3C2Tx was determined to be 526.6 mg/g for UO2(CO3)22- at 328 K with quick reaction equilibrium (∼ 30 min). Kinetic and thermodynamic analyses of UO2(CO3)22- elimination process on Fe@Ti3C2Tx surface revealed it to be a spontaneous and endothermic single-phase elimination process. FT-IR and XPS analyses further indicated that the removal mechanism of UO2(CO3)22- by Fe@Ti3C2Tx was surface complexation. Our study suggests that Fe@Ti3C2Tx can provide a feasible solution for uranium enrichment in seawater.

Recent strategies, progress, and prospects of two-dimensional metal carbides (MXenes) materials in wastewater purification: A review

With the rapid development of industrialization, water pollution directly leads to the serious shortage of fresh water. As reported by the World Water Council, nearly 3.8 billion people will face water scarcity by 2030. Therefore, developing advanced nanomaterials to realize wastewater purification is a major challenge. Two-dimensional (2D) transition metal carbides (MXenes), as the emerging 2D layered nanomaterials, have been investigated for the applications of water purification treatment since first reported in 2011. Over 40 different MXenes have been developed for environmental remediation, and dozens more structures and properties are theoretically predicted. Here, we review the advances from the aspects of synthesis strategies for MXenes, purification mechanism, and their applications in wastewater treatment processes. The major points are 1) the synthesis and modification approaches for MXenes such as multi-layered stacked MXenes and delaminated MXenes 2) a discussion of current water remediation over MXene-based materials, 3) a brief introduction for removal behaviors and deep interaction mechanisms, 4) optimization strategies and key points for boosting the remediation performance of MXenes.

Novel Co3O4@TiO2@CdS@Au double-shelled nanocage for high-efficient photocatalysis removal of U(VI): Roles of spatial charges separation and photothermal effect

Effective spatial separation and utilization of photogenerated charges are critical for photocatalysis process. Herein, novel Co₃O₄ @TiO₂ @CdS@Au double-shelled nanocage (CTCA) with spatially separated redox centers was synthesized by loading Co₃O₄ and Au NP cocatalysts on the inner and outer surfaces of Z-scheme heterojunction (TiO₂ @CdS). The reduction rate constant of U(VI) by CTCA reached 0.218 min^-1 under simulated sunlight irradiation, which was 6.6, 3.2 and 36.3 times than that of monolayer CTCA (0.033 min^-1), CTC (0.068 min^-1) and CT (0.006 min^-1). The full-spectrum light-assisted photothermal catalytic performance can enable CTCA to remove 98.8% of U(VI) and degrade nearly 90% of five organic pollutants simultaneously. Detailed characterizations and theory calculations revealed that the photogenerated holes and electrons in CTCA flow inward and outward. More importantly, Co₃O₄ acts as a "nano heater" to generate the photothermal effect for further enhancing the charge transfer and accelerating the surface reaction kinetics. Meanwhile, the photogenerated electrons and superoxide radicals play a dominant role in reducing the adsorbed U(VI) to insoluble (UO₂)O₂·2H₂O(s). This work provides valuable input toward a novel double-shelled hollow nanocage reactor with excellent photothermal catalysis ability for efficient recovery U(VI) from uranium mine wastewater to address environmental contamination issues.

Electroactive and SERS-Active Ag@Cu2O NP-Programed Aptasensor for Dual-Mode Detection of Tetrodotoxin

Dual-mode nanotags with noninterference sensing signals improved the detection accuracy and sensitivity for the applications of tetrodotoxin (TTX) monitoring. Electroactive and surface-enhanced Raman scattering (SERS)-active Ag@Cu2O nanoparticles (NPs) were fabricated and displayed two electrooxidation signals at -0.13 and 0.17 V, attributed to the oxidization process of Cu+ and Ag0, respectively. Ag@Cu2O NPs were also found to exhibit stronger SERS performances than individual Ag NPs. The dielectric Cu2O shell with a large dielectric constant inhibited the attenuation of electromagnetic (EM) waves of Ag NPs, which strengthened the EM fields for SERS enhancement. The electron transfer from Ag to Cu2O to 4-aminothiophenol (4-ATP) also contributed to the SERS performances. Ag@Cu2O NPs were modified by TTX aptamers and assembled with MXene nanosheets (NSs) due to the large surface, good conductivity, and inherent Raman properties. The assemblies showed two-peaked electrooxidation signals and prominent SERS activity. An electrochemical detection curve was established by using the total peak intensity at -0.13 and 0.17 V as detection signals, and a ratiometric SERS detection curve was developed by applying the intensity at 1078 cm-1 (4-ATP) as the detection signal and 730 cm-1 (MXene NSs) as the reference signal. An electrochemical and SERS signal-programed dual-mode aptasensor was proposed for accurate TTX detection, with the limits of detection of 31.6 pg/mL for the electrochemical signal and 38.3 pg/mL for the SERS signal. The rational design of plasmonic metal-semiconductor heterogeneous nanocomposites had important prospects in establishing a multimodal biosensing platform for the quantitative and accurate detection of analytes in complex systems.

Synthesis of Large-Area MXenes with High Yields through Power-Focused Delamination Utilizing Vortex Kinetic Energy

Evaluating the delamination process in the synthesis of MXenes (2D transition metal carbides and nitrides) is critical for their development and applications. However, the preparation of large defect-free MXene flakes with high yields is challenging. Here, a power-focused delamination (PFD) strategy is demonstrated that can enhance both the delamination efficiency and yield of large Ti₃ C₂ T_x MXene nanosheets through repetitive precipitation and vortex shaking processes. Following this protocol, a colloidal concentration of 20.4 mg mL^-1 of the Ti₃ C₂ T_x MXene can be achieved after five PFD cycles, and the yield of the basal-plane-defect-free Ti₃ C₂ T_x nanosheets reaches 61.2%, which is 6.4-fold higher than that obtained using the sonication-exfoliation method. Both nanometer-thin devices and self-supporting films exhibit excellent electrical conductivities (≈25 000 and 8260 S cm^-1 for a 1.8 nm thick monolayer and 11 µm thick film, respectively). Hydrodynamic simulations reveal that the PFD method can efficiently concentrate the shear stress on the surface of the unexfoliated material, leading to the exfoliation of the nanosheets. The PFD-synthesized large MXene nanosheets exhibit superior electrical conductivities and electromagnetic shielding (shielding effectiveness per unit volume: 35 419 dB cm² g^-1 ). Therefore, the PFD strategy provides an efficient route for the preparation of high-performance single-layer MXene nanosheets with large areas and high yields.