Reduced graphene oxide as an effective promoter to the layered manganese oxide-supported Ag catalysts for the oxidation of ethyl acetate and carbon monoxide

A brief review of preparation and applications of monolithic aerogels in atmospheric environmental purification

Monolithic aerogels are promising candidates for use in atmospheric environmental purification due to their structural advantages, such as fine building block size together with high specific surface area, abundant pore structure, etc. Additionally, monolithic aerogels possess a unique monolithic macrostructure that sets them apart from aerogel powders and nanoparticles in practical environmental clean-up applications. This review delves into the available synthesis strategies and atmospheric environmental applications of monolithic aerogels, covering types of monolithic aerogels including SiO2, graphene, metal oxides and their combinations, along with their preparation methods. In particular, recent developments for VOC adsorption, CO2 capture, catalytic oxidation of VOCs and catalytic reduction of CO2 are highlighted. Finally, challenges and future opportunities for monolithic aerogels in the atmospheric environmental purification field are proposed. This review provides valuable insights for designing and utilizing monolithic aerogel-based functional materials.

Strong metal-support interaction (SMSI) in environmental catalysis: Mechanisms, application, regulation strategies, and breakthroughs

The strong metal-support interaction (SMSI) in supported catalysts plays a dominant role in catalytic degradation, upgrading, and remanufacturing of environmental pollutants. Previous studies have shown that SMSI is crucial in supported catalysts' activity and stability. However, for redox reactions catalyzed in environmental catalysis, the enhancement mechanism of SMSI-induced oxygen vacancy and electron transfer needs to be clarified. Additionally, the precise control of SMSI interface sites remains to be fully understood. Here we provide a systematic review of SMSI's catalytic mechanisms and control strategies in purifying gaseous pollutants, treating organic wastewater, and valorizing biomass solid waste. We explore the adsorption and activation mechanisms of SMSI in redox reactions by examining interfacial electron transfer, interfacial oxygen vacancy, and interfacial acidic sites. Furthermore, we develop a precise regulation strategy of SMSI from systematical perspectives of interface effect, crystal facet effect, size effect, guest ion doping, and modification effect. Importantly, we point out the drawbacks and breakthrough directions for SMSI regulation in environmental catalysis, including partial encapsulation strategy, size optimization strategy, interface oxygen vacancy strategy, and multi-component strategy. This review article provides the potential applications of SMSI and offers guidance for its controlled regulation in environmental catalysis.

Constructing Pd@Layered-CoOx/MFI Bifunctional Catalyst for Efficient Ethyl Acetate Oxidation: Boosted C═O Activation and *O Species Transformation

Oxygenated volatile organic compounds (OVOCs), emitted in large quantities by the chemical industry, are a major contributor to the formation of ozone and subsequent particulate matter. For the efficient catalytic oxidation of OVOCs, the challenges of molecular activation and intermediate inhibition remain. The construction of bifunctional active sites with specific structures offers a promising way to overcome these problems. Here, the Pd@Layered-CoOx/MFI bifunctional catalyst with core-shell active sites was rationally fabricated though a two-step ligand pyrolysis method, which exhibits a superb oxidation efficiency toward ethyl acetate (EA). Over this, 13.4% of EA (1000 ppm) can be oxidized at just 140 °C with a reaction rate of 13.85 mmol·gPd-1·s-1, around 176.7 times higher than that of the conventional Pd-CoOx/MFI catalyst. The electronic coupling of the Pd-Co pair promotes the electron back-donation from Pd nanoparticles to the layered CoOx shell and facilitates the formation of Pd2+ species, which greatly enhances the adsorption and activation of the electron-rich C═O bond of the EA molecules. In addition, the synergy of these core-shell Pd@Layered-CoOx sites accelerates the activation and transformation of *O species, which inhibit the formation of acetaldehyde and ethanol byproducts, ensuring the rapid total oxidation of EA molecules via the Mars-van Krevelen mechanism. This work established a solid foundation for exploring robust bifunctional catalysts for deep OVOC purification.

Insights into the underpinning effect of graphene in Cu1Mn10 on enhancing the low-temperature catalytic activity for CO oxidation

CO emission is a critical issue of industrial processes such as steel-smelting, cement manufacturing, and waste incineration. Catalytic oxidation based on Cu-Mn binary catalysts shows great potential for efficient removal of CO, whereas their practical applicability is limited by the inferior low-temperature catalytic activity and the high catalyst cost owing to a substantial quantity of Cu. In this study, doping graphene is designed to adjust the electron transfer capability to improve the low-temperature catalytic activity as well as reduce the amount of Cu, and thereby Cu1Mn10 catalysts doped with slight amounts of graphene (x%G-Cu1Mn10, x is 1∼5) were fabricated. It was found that the introduction of graphene could form effective electron transport channels to enhance the intermetallic interaction and oxygen vacancy generation, thus improving the low-temperature catalytic performance of the Cu1Mn10 catalyst. Among all the catalysts, 4%G-Cu1Mn10 exhibited the highest activity, achieving CO conversion of 92% at 110 °C at a weight hourly space velocity of 120,000 mL/(g∙h). The introduction of graphene also enabled the catalyst with excellent catalytic activity and stability at a relative humidity of 70%. Attractively, 4%G-Cu1Mn10 can be further loaded into the polyester fabric, presenting great application potentials in the effective elimination of CO during the dust removal process since the flue gas temperature in the dust collector is just around the T90% and the catalyst that is inside of fabric fiber rather than on the fabric surface can be rarely influenced by the dust. In general, doping graphene provides a facile method to enhance the low-temperature activities of the Cu-Mn binary catalysts and cut down the use of valuable Cu, showing great application potential.

Graphene oxide supported ionic liquid/Fe complex: a robust and highly stable nanocatalyst

Herein, a lamellar structured nano-graphene oxide supported ionic liquid/Fe complex (NGO/IL-Fe) is prepared through grafting of alkyl imidazolium chloride on the NGO followed by treatment with iron(iii) chloride hexahydrate. The NGO/IL-Fe nanomaterial was characterized by using FT-IR, PXRD, TGA, EDX and SEM techniques. NGO/IL-Fe was used as a robust and efficient nanocatalyst for the synthesis of tetrahydrobenzo[b]pyrans in water at 25 °C. The desired products were obtained in high yield over a relatively short time. The recoverability, reusability and also leaching tests were performed to study the stability and the nature of the designed catalyst under applied conditions.

NIR-Activated Thermosensitive Liposome-Gold Nanorod Hybrids for Enhanced Drug Delivery and Stimulus Sensitivity

Combinatorial photothermal therapy and chemotherapy is an extremely promising tumor therapeutic modality. However, such systems still remain challenges in stimulus sensitivity, avoiding drug leakage, and therapeutic safety. To solve these problems, we engineered actively loaded doxorubicin (DOX) and gold nanorod (GNR) liposomes through embedding stiff hollow mesoporous silica nanoparticles (HMSNs) in the liposomal water cavity (HMLGDB) to resist the influence of shear force of GNRs to prevent drug leakage. Under 808 nm laser irradiation, the ambient temperature was raised greatly because of the photothermal conversion of GNRs, thereby rupturing the lipid layer and then triggering the DOX release. The results of in vitro experiments showed that the low concentration of HMLGDB (15 μg/mL) could effectively overcome the MCF-7 cells (human breast cancer cell line) by the increase of DOX concentration intracellularly and the good photothermal effect of GNRs. After intravenous injection, HMLGDB exhibited intratumor aggregation and PTT capacity. Furthermore, the combined chemo-photothermal antitumor strategy demonstrated a high inhibition of tumor growth and low damage to normal tissues. The developed hybrids provide a paradigm for efficient combinatorial photothermal therapy (PTT) and chemotherapy (CT).

A Review of Noble Metal Catalysts for Catalytic Removal of VOCs

Volatile organic compounds (VOCs) are important precursors for the formation of secondary pollutants, such as fine particulate matter (PM) and ozone (O3), which will lead to severe atmospheric environmental problems to restrict the sustainable development of the social economy. Catalytic oxidation is a safe, eco-friendly, and simple method for eliminating VOCs, which can be converted into CO2 and H2O without the generation of other harmful substances. The fabrication and development of catalysts are very crucial to enhance the catalytic oxidation efficiency of the removal of VOCs. The noble metal catalyst is one of the commonly used catalysts for the catalytic oxidation of VOCs because of the high reaction activity, good stability, poisoning-resistant ability, and easy regeneration. In this review, the research progress of noble metal (Pt, Pd, Au, Ag, and Ir) catalysts for the removal of VOCs in recent years was summarized with the discussion of the influence factors in the preparation process on the catalytic performance. The reaction mechanisms of the removal of VOCs over the corresponding noble metal catalysts were also briefly discussed.