Primary organic gas emissions in vehicle cold start events: Rates, compositions and temperature effects

Light-duty vehicle organic gas emissions from tailpipe and evaporation: A review of influencing factors

Vehicle organic gas emissions are becoming an increasingly significant pollution source in many cities, leading to serious negative impacts on human health and the environment. However, interest in vehicular emissions is currently mostly focused on the emission characteristics of regulated gas, while little information is available on the systematic overview of organic gas emissions, particularly under different conditions. This review classifies the current status of research and control measures regarding organic gas emissions from light-duty vehicles. The key factors influencing tailpipe and evaporative emissions, including temperature, fuel composition, vehicle mileage, driving conditions, and road conditions, are identified. Building upon this review, we conducted a case study to comprehensively assess the impact of temperature and fuel on organic gas emissions. Looking ahead, future research on organic gas emissions from motor vehicles could delve deeper into the component characteristics, evaporative emissions, and model applications. Better understanding the effects of crucial factors on organic gas emissions from vehicles would aid in effectively managing and regulating tailpipe and evaporative emissions, thereby improving atmospheric air quality.

Emission of Intermediate Volatile Organic Compounds from Animal Dung and Coal Combustion and Its Contribution to Secondary Organic Aerosol Formation in Qinghai-Tibet Plateau, China

Intermediate volatility organic compounds (IVOCs) are important precursors to secondary organic aerosols (SOAs), but they are often neglected in studies concerning SOA formation. This study addresses the significant issue of IVOCs emissions in the Qinghai-Tibetan plateau (QTP), where solid fuels are extensively used under incomplete combustion conditions for residential heating and cooking. Our field measurement data revealed an emission factor of the total IVOCs (EFIVOCs) ranging from 1.56 ± 0.03 to 9.97 ± 3.22 g/kg from various combustion scenarios in QTP. The markedly higher EFIVOCs in QTP than in plain regions can be attributed to oxygen-deficient conditions. IVOCs were dominated by gaseous phase emissions, and the primary contributors of gaseous and particulate phase IVOCs are the unresolved complex mixture and alkanes, respectively. Total IVOCs emissions during the heating and nonheating seasons in QTP were estimated to be 31.7 ± 13.8 and 6.87 ± 0.45 Gg, respectively. The estimated SOA production resulting from combined emissions of IVOCs and VOCs is nearly five times higher than that derived from VOCs alone. Results from this study emphasized the pivotal role of IVOCs emissions in air pollution and provided a foundation for compiling emission inventories related to solid fuel combustion and developing pollution prevention strategies.

VOC and IVOC emission features and inventory of motorcycles in China

How did the motorcycle emissions evolve during the economic development in China? To address data gaps, this study firstly measured the volatile organic compound (VOC) and intermediate-volatility organic compound (IVOC) emissions from motorcycles. The results confirmed that the emission control of motorcycles, especially small-displacement motorcycles, significantly lagged behind other gasoline-powered vehicles. For the China IV motorcycles, the average VOC and IVOC emission factors (EFs) were 2.74 and 7.78 times higher than the China V-VI light-duty gasoline vehicles, respectively. The notable high IVOC emissions were attributed to a dual influence from gasoline and lubricating oil. Furthermore, based on the complete EF dataset and economy-related activity data, a county-level emission inventory was developed in China. Motorcycle VOC and IVOC emissions changed from 2536.48 Gg and 197.19 Gg in 2006 to 594.21 Gg and 12.66 Gg in 2020, respectively. The absence of motorcycle IVOC emissions in the existed vehicular inventories led to an underestimation of up to 20%. Across the 15 years, the motorcycle VOC and IVOC emission hotspots were concentrated in the undeveloped regions, with the rural emissions reaching 5.81-10.14 times those of the urban emissions. This study provides the first-hand and close-to-realistic data to support motorcycle emission management and accurate air quality simulations.

Impacts of ethanol blended fuels and cold temperature on VOC emissions from gasoline vehicles in China

The Chinese central government has initiated pilot projects to promote the adoption of gasoline containing 10%v ethanol (E10). Vehicle emissions using ethanol blended fuels require investigation to estimate the environmental impacts of the initiative. Five fuel formulations were created using two blending methods (splash blending and match blending) to evaluate the impacts of formulations on speciated volatile organic compounds (VOCs) from exhaust emissions. Seven in-use vehicles covering China 4 to China 6 emission standards were recruited. Vehicle tests were conducted using the Worldwide Harmonized Test Cycle (WLTC) in a temperature-controlled chamber at 23 °C and -7 °C. Splash blended E10 fuels led to significant reductions in VOC emissions by 12%-75%. E10 fuels had a better performance of reducing VOC emissions in older model vehicles than in newer model vehicles. These results suggested that E10 fuel could be an option to mitigate the VOC emissions. Although replacing methyl tert-butyl ether (MTBE) with ethanol in regular gasoline had no significant effects on VOC emissions, the replacement led to lower aromatic emissions by 40%-60%. Alkanes and aromatics dominated approximately 90% of VOC emissions for all vehicle-fuel combinations. Cold temperature increased VOC emissions significantly, by 3-26 folds for all vehicle/fuel combinations at -7 °C. Aromatic emissions were increased by cold temperature, from 2 to 26 mg/km at 23 °C to 33-238 mg/km at -7 °C. OVOC emissions were not significantly affected by E10 fuel or cold temperature. The ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAFP) of splash blended E10 fuels decreased by up to 76% and 81%, respectively, compared with those of E0 fuels. The results are useful to update VOC emission profiles of Chinese vehicles using ethanol blended gasoline and under low-temperature conditions.

Differentiated emissions and secondary organic aerosol formation potential of organic vapor from industrial coatings in China

Organic vapors emitted during solvent use are important precursors of secondary organic aerosols (SOAs). Industrial coatings are a major class of solvents that emit volatile and intermediate volatile organic compounds (VOCs and IVOCs, respectively). However, the emission factors and source profiles of VOCs and IVOCs from industrial coatings remain unclear. In this study, representative solvent- and water-based industrial paints were evaporated, sampled and tested using online and offline instruments. The VOC and IVOC emission factors for solvent-based paints are 129-254 and 25-80 g/kg, while for water-based paint are 13 and 32 g/kg, respectively. In solvent-based paints, the VOCs are mainly aromatics, while the IVOCs are composed of long-chain alkanes, alkenes, carbonyls and halocarbons. The VOCs and IVOCs in water-based paint are mostly oxygenates, such as ethanol, acetone, ethylene glycol, and Texanol. During the evaporation of solvent-based paints, the fraction of IVOCs increases along with those of alkenes and aldehydes, while the proportion of aromatics decreases. For water-based paint, the fraction of IVOCs slightly decreases with evaporation. The SOA formation potentials of solvent-based paints are 8.6-28.0 g/kg, much higher than that of water-based paint (0.65 g/kg); thus, substituting solvent-based paints with water-based paints may significantly decrease SOA formation.

Emission characteristics of intermediate volatility organic compounds from a Chinese gasoline engine under varied operating conditions: Influence of fuel, velocity, torque, rotational speed, and after-treatment device

Improved measurement of new pollutants, particularly intermediate volatility organic compounds (IVOCs), is urgently needed due to the lack of emission data under various operating conditions and potential fuel switching for gasoline engines. This study focused on examining the emission characteristics of IVOCs and the formation of secondary organic aerosols (SOA) in a commercial gasoline direct injection (GDI) engine, considering different fuels and operating conditions. The key findings are as follows: (1) The emission factor (EF) of IVOCs ranged from 2.0 to 357.8 mg kg-fuel-1, with a median value of 87.9 mg kg-fuel-1. (2) IVOCs emission characteristics were influenced by the fuel type and engine operating conditions. The addition of ethanol resulted in a significant decrease in IVOCs emissions, while lower velocities and torques led to higher IVOCs emissions. (3) Ethanol-blended fuel scenarios (E10, E25) and CGPF (Pd/Rh catalytically coated gasoline particle filter)-equipped scenarios exhibited high proportions of oxygen-containing compounds like aliphatic alcohols, ethers, and carboxylic acids. (4) IVOCs exhibited a high potential for the formation of SOA, underscoring the importance of controlling IVOCs in future strategies to mitigate particulate matter pollution in China. These findings highlight the significance of smooth traffic flow and advancements in fuel types, engine technologies, and after-treatment designs to effectively control IVOC emissions and contribute to the realization of a carbon-neutral society.

Complex temperature dependence of vehicular emissions: Evidence from a global meta-analysis

The significant impact of low ambient temperature, which was less regulated, on vehicle exhaust emissions had garnered considerable attention. This study investigated the impact of ambient temperature on exhaust emissions based on the global meta-analysis. The estimated sizes (mean difference, MDt) of 11 exhaust pollutants were quantified with 1795 observations at low ambient temperatures (LATs, -18 °C to -7 °C) versus warm ambient temperatures (WATs, 20 °C-30 °C). The results indicated a strong and positive effect of LATs on vehicular emissions, with the average ratio of vehicular emission factors at LATs to those at WATs (EFLAT/EFWAT) ranging from 1.14 to 3.84. Oil-based subgroup analysis indicated a quite large MDt [NOx] of diesel engines (12.42-15.10 mg km-1·k-1). Particulate emissions were 0.22-1.41 mg km-1·k-1 enhanced during cold-start tests at LATs. The application of particulate filters on motor vehicles greatly reduced the impact of ambient temperature on tailpipe particulate emissions, at the expense of induced NOx emissions. During the Federal Test Procedure (FTP-75), exhaust emissions showed higher temperature dependence compared to the averaged levels (1.31-39.31 times). Locally weighted regression was used to determine exhaust temperature profiles, revealing that gasoline vehicles emitted more particulates at LATs, while diesel vehicles showed the opposite trend. Given the widespread use of motor vehicles worldwide, future motor vehicle emission standards should include tighter limits on exhaust emissions at LATs.

The Actual Toxicity of Engine Exhaust Gases Emitted from Vehicles: The Development and Perspectives of Biological and Chemical Measurement Methods

Most of the current studies on vehicle engine exhaust emissions are focused on qualitative and quantitative measurements. Approval tests for admitting vehicles to traffic and tests performed at vehicle inspection stations are limited to measuring the concentrations of individual compounds or selected groups of compounds. For vehicles with compression-ignition engines, the annual emission control comprises only an exhaust gas opacity test, performed with an opacimeter. This approach does not consider very harmful groups of compounds that determine the toxicity of exhaust gases but are not directly covered by the emission standards, such as polycyclic aromatic hydrocarbons and volatile organic compounds. Also, it does not provide a clear answer to the question of the actual toxicity of exhaust gases, understood as the harmful effect that a given substance causes on living organisms or biological processes. Studies on the actual toxicity of engine exhaust gases present a new area of interest, increasingly more discussed but still not approached in a comprehensive way. The studies include experiments using in vitro biological methods and chemical analyses of gas mixtures. In this Review, I present an overview of current research and a critical comparison of commonly used methods of testing engine exhaust emissions and methods that might supplement them in a significant manner. The development of in vitro biological methods, including methods of microscopic analysis of cells in the assessment of exhaust gas toxicity, provides an innovative approach to the problem of air pollution. This type of research presents the opportunity to indisputably answer the question of the actual toxicity of a given gas mixture and to make a new contribution to science in the field of molecular biology. Current data show that the survival of cells exposed to engine exhaust emissions from older generation vehicles is higher compared to that of newer generation vehicles.

Updating emission inventories for vehicular organic gases: Indications from cold-start and temperature effects on advanced technology cars

How would the organic gas emission inventories of future urban vehicles change with new features of advanced technology cars? Here, volatile organic compounds (VOCs) and intermediate volatile organic compounds (IVOCs) from a fleet of Chinese light-duty gasoline vehicles (LDGVs) were characterized by chassis dynamometer experiments to grasp the key factors affecting future inventory accuracy. Subsequently, the VOC and IVOC emissions of LDGVs in Beijing, China, from 2020 to 2035, were calculated and the spatial-temporal variations were recognized under a scenario of fleet renewal. With the tightening of emission standards (ESs), cold start contributed a larger fraction of the total unified cycle VOC emissions due to the imbalanced emission reductions between operating conditions. It took 757.47 ± 337.75 km of hot running to equal one cold-start VOC emission for the latest certified vehicles. Therefore, the future tailpipe VOC emissions would be highly dependent on discrete cold start events rather than traffic flows. By contrast, the equivalent distance was shorter and more stable for IVOCs, with an average of 8.69 ± 4.59 km across the ESs, suggesting insufficient controls. Furthermore, there were log-linear relationships between temperatures and cold-start emissions, and the gasoline direct-injection vehicles performed better adaptability under low temperatures. In the updated emission inventories, the VOC emissions were more effectively reduced than the IVOC emissions. The start emissions of VOCs were estimated to be increasingly dominant, especially in wintertime. By winter 2035, the contribution of VOC start emissions could reach 98.98 % in Beijing, while the fraction of IVOC start emissions would decrease to 59.23 %. Spatially allocation showed that the high emission regions of tailpipe organic gases from LDGVs have transferred from road networks to regions of intense human activities. Our results provide new insights into tailpipe organic gas emissions of gasoline vehicles, and can support future emission inventories and refined assessment of air quality and human health risk.

Emission characteristics and light absorption apportionment of carbonaceous aerosols: A tunnel test conducted in an urban with fully enclosed use of E10 petrol

To reduce the heavy dependence on petroleum, bioethanol has been increasingly employed as an alternative and sustainable transportation fuel. However, the characteristics of black carbon (BC) emissions from E10 petrol vehicles (i.e., ethanol-gasoline containing 10% ethanol) are still unclear, especially under real driving conditions. Here, a tunnel test was conducted during a cold winter. This tunnel was characterized by heavy traffic comprising more than 98% E10-fueled gasoline vehicles (GVs). Real-time BC concentrations, traffic parameters and meteorological conditions were recorded during the sampling campaign. The average BC concentration inside the tunnel (10.94 ± 5.02 μg m^-3) was almost twice the background concentration. Based on aethalometer AE33 in situ measurements and the minimum R-squared (MRS) method, real-time aerosol light absorption was apportioned. The light absorption proportions of BC, primary brown carbon (BrC₁) and secondary brown carbon (BrC₂) were 79.86%, 2.78% and 17.36%, respectively, at 370 nm. The BC emission factor (EF_BC) of the E10-fueled vehicles was 1.09 ± 0.49 mg km^-1·veh^-1 and 15.24 ± 6.85 mg·(kg fuel)^-1, lower than those of traditional gasoline fueled vehicles in previous studies. This study can support the compilation of vehicular BC emission inventories, provide recommendations for biofuel policies and contribute to comprehensively understanding the climatic impact of E10 petrol.