Comparative analysis for the impacts of VOC subgroups and atmospheric oxidation capacity on O3 based on different observation-based methods at a suburban site in the North China Plain

The persistent O3 pollution in the Beijing-Tianjin-Hebei (BTH) region remains unresolved, largely due to limited comprehension of O3-precursor relationship and photochemistry drivers. In this work, intraday O3 sensitivity evolution from VOC-limited (volatile organic compound) regime in the forenoon to transition regime in the late afternoon was inferred by relative incremental reactivity (RIR) in summer 2019 at Xianghe, a suburban site in BTH region, suggesting that VOC-focused control policy could combine with stringent afternoon NOx control. Then detailed impacts of VOC subgroups on O3 formation were further comprehensively quantified by parametric OH reactivity (KOH), O3 formation potential (OFP), as well as RIR weighted value and O3 formation path tracing (OFPT) approach based on photochemical box model. O3 episode days corresponded to stronger O3 formation, depicted by higher KOH (10.4 s-1), OFP (331.7 μg m-3), RIR weighted value (1.2), and F(O3)-OFPT (15.5 ppbv h-1). High proportions of isoprene and OVOCs (oxygenated VOCs) to the total KOH and the OFPT method were demonstrated whereas results of OFP and RIR-weighted presented extra great impacts of aromatics on O3 formation. The OFPT approach captured the process that has already happened and included final O3 response to the original VOC, thus reliable for replicating VOC impacts. The comparison results of the four methods showed similarities when utilizing KOH and OFPT methods, which reveals that the potential applicability of simple KOH for contingency VOC control and more complex OFPT method for detailed VOC- and source-oriented control during policy-making. To investigate propulsion of VOC-involved O3 photochemistry, atmospheric oxidation capacity (AOC) was quantified by two atmospheric oxidation indexes (AOI). Both AOIp_G (7.0 × 107 molec cm-3 s-1, potential AOC calculated by oxidation reaction rates) and AOIe_G (8.5 μmol m-3, estimated AOC given redox electron transfer for oxidation products) were stronger on O3 episode days, indicating that AOC promoted the radical cycling initiated from VOC oxidation and subsequent O3 production. Result-oriented AOIe_G reasonably characterized actual AOC inferred by good linear correlation between AOIe_G and O3 concentrations compared to process-oriented AOIp_G. Therefore, with continuous NOx abatement, AOIe_G should be considered to represent actual AOC, also O3-inducing ability.

Impacts of ethanol blended fuels and cold temperature on VOC emissions from gasoline vehicles in China

The Chinese central government has initiated pilot projects to promote the adoption of gasoline containing 10%v ethanol (E10). Vehicle emissions using ethanol blended fuels require investigation to estimate the environmental impacts of the initiative. Five fuel formulations were created using two blending methods (splash blending and match blending) to evaluate the impacts of formulations on speciated volatile organic compounds (VOCs) from exhaust emissions. Seven in-use vehicles covering China 4 to China 6 emission standards were recruited. Vehicle tests were conducted using the Worldwide Harmonized Test Cycle (WLTC) in a temperature-controlled chamber at 23 °C and -7 °C. Splash blended E10 fuels led to significant reductions in VOC emissions by 12%-75%. E10 fuels had a better performance of reducing VOC emissions in older model vehicles than in newer model vehicles. These results suggested that E10 fuel could be an option to mitigate the VOC emissions. Although replacing methyl tert-butyl ether (MTBE) with ethanol in regular gasoline had no significant effects on VOC emissions, the replacement led to lower aromatic emissions by 40%-60%. Alkanes and aromatics dominated approximately 90% of VOC emissions for all vehicle-fuel combinations. Cold temperature increased VOC emissions significantly, by 3-26 folds for all vehicle/fuel combinations at -7 °C. Aromatic emissions were increased by cold temperature, from 2 to 26 mg/km at 23 °C to 33-238 mg/km at -7 °C. OVOC emissions were not significantly affected by E10 fuel or cold temperature. The ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAFP) of splash blended E10 fuels decreased by up to 76% and 81%, respectively, compared with those of E0 fuels. The results are useful to update VOC emission profiles of Chinese vehicles using ethanol blended gasoline and under low-temperature conditions.

Ozone containment through selective mitigation measures on precursors of volatile organic compounds

Abatement of volatile organic compounds (VOCs) ozone reduction is usually carried out by reducing the total amount of VOCs without considering reactivity between different species. This study incorporates the concept of maximum incremental reactivity (MIR) and speciation profiles into the industrial emission inventory of Taiwan to target organic species from industrial sources with the greatest ozone formation potentials (OFPs). These high OFP sources/species are then mitigated to assess the O3 reduction amount (ΔO3) with Community Multiscale Air Quality (CMAQ) modeling under VOC-limited conditions. The objective is to minimize the number of target sources/species and their tonnage while achieving maximum O3 reduction. This approach is referred to as the Selective Precursor Mitigation (SPM). A case study of a high ozone episode (September 4-10, 2020) was chosen for illustration, during which a relatively stagnant atmospheric condition with minimal transboundary ozone occurred. A series of scenarios to target the highest OFP chemicals/industries for mitigation are compared for the achievable max. ΔO3, areas affected (area coverage), and reduction efficiency. For instance, by reducing the ten leading industry classes with the island's highest OFPs (OFPind), up to 19 % of max. 1-h ΔO3 can be expected. If, however, the same tonnage of VOCs as that of OFPind is distributed to all industries without considering the reactivity, called the overall mitigation (OM), comparable results to those of OFPind were found, but the number of sources needed to be managed with OM would increase by nearly three times (29,662 for OM vs. 11,981 for OFPind). Further reducing the management scale by only zooming in the ten highest OFP chemicals within the ten leading OFP industries (OFPsp) would result in relatively limited area coverage. Still, major ozone hot spots could be alleviated. Although the domain is set on the island of Taiwan, the SPM approach is universally applicable to other regions worldwide to gain the maximum ozone reduction effect at a minimized societal cost.

Identification of volatile organic compounds and their sources driving ozone and secondary organic aerosol formation in NE Spain

Volatile organic compounds (VOCs) play a crucial role in the formation of ozone (O3) and secondary organic aerosol (SOA). We conducted measurements of VOC ambient mixing ratios during both summer and winter at two stations: a Barcelona urban background station (BCN) and the Montseny rural background station (MSY). Subsequently, we employed positive matrix factorization (PMF) to analyze the VOC mixing ratios and identify their sources. Our analysis revealed five common sources: anthropogenic I (traffic & industries); anthropogenic II (traffic & biomass burning); isoprene oxidation; monoterpenes; long-lifetime VOCs. To assess the impact of these VOCs on the formation of secondary pollutants, we calculated the ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAP) associated with each VOC. In conclusion, our study provides insights into the sources of VOCs and their contributions to the formation of ozone and SOA in NE Spain. The OFP was primarily influenced by anthropogenic aromatic compounds from the traffic & industries source at BCN (38-49 %) and during winter at MSY (34 %). In contrast, the summer OFP at MSY was primarily driven by biogenic contributions from monoterpenes and isoprene oxidation products (45 %). Acetaldehyde (10-35 %) and methanol (13-14 %) also made significant OFP contributions at both stations. Anthropogenic aromatic compounds originating from traffic, industries, and biomass burning played a dominant role (88-93 %) in SOA formation at both stations during both seasons. The only exception was during the summer at MSY, where monoterpenes became the primary driver of SOA formation (41 %). These findings emphasize the importance of considering both anthropogenic and biogenic VOCs in air quality management strategies.

Comparison of tailpipe carbonyls and volatile organic compounds emissions from in-use gasoline/CNG bi-fuel vehicles

Ground-level ozone contamination has been globally an urban air quality issue, particularly for China, which has recently made significant progress in purifying its sky. Unregulated exhaust emissions from motor vehicles, predominantly carbonyls and volatile organic compounds (VOCs), are among the leading contributors to ozone formation. In this chassis-level study, the unregulated emissions from five China-5 certified gasoline/CNG bi-fuel taxis, along with their ozone forming potential (OFP), were evaluated. It is found that carbonyls and VOCs were mainly emitted during the starting phase no matter the engine was cold or hot. Compared to gasoline, CNG fueling reduced VOCs emissions on a large scale, especially in the starting phase, but had elevated carbonyls. On a fleet average, CNG fueling derived 15% and 46% less OFP than gasoline in cold- and hot-start tests, respectively. VOCs contributed to over 90% of the total OFP of the exhaust. In terms of alleviating ground-level ozone contamination, CNG is a feasible alternative to gasoline on light-duty vehicles.

Passive air sampling of VOCs, O3, NO2, and SO2 in the large industrial city of Ulsan, South Korea: spatial-temporal variations, source identification, and ozone formation potential

Concerns about volatile organic compounds (VOCs) have increased due to their toxicity and secondary reaction with nitrogen oxides (NOX) to form ozone (O3). In this study, passive air sampling of VOCs, O3, NO2, and SO2 was conducted in summer, fall, winter, and spring from 2019 to 2020 at six industrial and ten urban sites in Ulsan, the largest industrial city in South Korea. Over the entire sampling period, the concentration of toluene (mean: 8.75 μg/m3) was the highest of the 50 target VOCs, followed by m,p-xylenes (4.52 μg/m3), ethylbenzene (4.48 μg/m3), 3-methylpentane (4.40 μg/m3), and n-octane (4.26 μg/m3). Total (Σ50) VOC levels did not statistically differ between seasons, indicating that large amounts of VOCs are emitted into the atmosphere throughout the year. On the other hand, O3, NO2, and SO2 exhibited strong seasonal variation depending on the meteorological conditions and emission sources. The spatial distribution of Σ50 VOCs, NO2, and SO2 indicated that industrial complexes were major sources in Ulsan, while O3 had the opposite spatial distribution. Using a positive matrix factorization model, five major sources were identified, with industrial effects dominant. Aromatic compounds, such as m,p,o-xylenes, toluene, and 1,2,4-trimethylbenzene, significantly contributed to O3 formation. The VOC/NO2 ratio and O3 concentrations suggested that reducing VOC emissions is more effective than reducing NO2 emissions in terms of preventing the secondary formation of O3. The findings of this study allow for a better understanding of the relationship between VOCs, O3, NO2, and SO2 in industrial cities.

A new NMVOC speciated inventory for a reactivity-based approach to support ozone control strategies in Spain

Ozone (O₃) pollution is a persistent problem in many regions of Spain, so understanding O₃ precursor emissions and trends is essential to design effective control strategies. We estimated the impact of Non-Methane Volatile Organic Compounds (NMVOC) species upon O₃ formation potential (OFP) using the maximum incremental reactivity approach. For this, we developed a speciated NMVOC emission inventory for Spain from 2010 to 2019 combining national reported emissions with state-of-the-art speciation profiles, which resulted in a database of emissions for over 900 individual NMVOC species and 153 individual sectors. Additionally, we analysed 2030 emission projections to quantify the expected impact of planned measures on future OFP levels. Overall, the main activities contributing to OFP in Spain are paint manufacturing and applications (20 %), manure management (16 %), and domestic solvent use (6 %). These activities contribute unevenly across regions. The more urbanised areas report a larger contribution from the solvent sector (64 % in Madrid), while in rural areas, manure management and agricultural waste burning gain importance (24 % in Extremadura), indicating that local control measures should be implemented. The top 10 NMVOC species contributing to OFP are ethanol, ethene, xylenes, propene, toluene, formaldehyde, 1,3-butadiene, styrene, n-butane, and cyclopentane, which together are responsible for 54 % of the total OFP. Our trend analysis indicates a reduction of NMVOC emissions and OFP of -5 % and -10 % between 2010 and 2019, respectively. The larger decrease in OFP is driven by a bigger reduction in xylenes (-29 %) and toluene (-28 %) from paint application industries and the road transport sector. By 2030 a significant increase (+37 %) in the OFP from the public electricity sector is expected due to the planned increase in biomass use for power generation. Our results indicate that policies should focus on paint reformulation, limiting aerosol products, and implementing NMVOC control devices in future biomass power plants.

VOC emission profiles from typical solid fuel combustion in Fenhe River Basin: Field measurements and environmental implication

This study examined volatile organic compounds (VOCs) emitted from the combustion of seven typical biomass fuel types in a traditional stove, elevated kang, and biomass furnace and from the combustion of three types of coal in coal furnaces. The results revealed that emission factors (EFs) of VOCs emitted from combustion processes ranged from 48.8 ± 29.1 mg/kg (for anthracite combustion in an outdoor boiler) to 5700 ± 6040 mg/kg (for sesame straw combustion in a traditional stove). Changing the fuel type engendered a more significant EF reduction (82.7%) than changing the stove type (51.8%). The emitted VOCs (including oxygenated VOCs, OVOCs) can be ordered as follows (in descending order) in terms of proportion: OVOCs > alkenes > aromatic VOCs > alkanes > halo hydrocarbons > alkynes. These results indicate solid fuel combustion processes warrant attention because they produce high OVOC emissions. The ozone formation potential (OFP) values derived for VOCs emitted from solid fuel combustion ranged from 5.83 ± 0.72 to 1910 ± 1750 mg/kg. Clean fuel and clean stove technologies both exhibited >80% efficiency levels in reducing OFP emissions (e.g., 80.6% reduction for the optimal fuel; 89.4% reduction for a clean stove). Therefore, the difference between VOC emission profiles from different combustion technologies should not be ignored. This study also noted substantial differences between VOC emissions from residential combustion and industrial combustion. Accordingly, attention should be paid to the local characteristics of fuels and stoves and to VOC emissions from residential combustion.

Carbonyls from commercial, canteen and residential cooking activities as crucial components of VOC emissions in China

Cooking in China supply the large population with nutrition and, as a commercial activity, it also promotes the economic growth of Chinese society. The specific cooking styles in China can produce complex volatile organic compound (VOC) emissions. The resulting adverse effects on the environment and human health of carbonyls from cooking should not be ignored. We quantitatively evaluated the contribution of carbonyls to common VOCs (carbonyl/VOC ratio) from cooking activities in China through the establishment and comparison of the source profiles, emission factors (EFs), emission amount and ozone formation potential (OFP). It was found that carbonyls are crucial components of VOCs from commercial, canteen and residential cooking activities (COC, CAC and REC, respectively). The carbonyl/VOC ratio from cooking activities in China had EFs, emissions, and a total OFP of 22-65 %, 23-34 %, and 49-104 %, respectively. The high OFP was due to the high OFP emissions intensity (OFP_EI) and maximum incremental reactivity (MIR) values of carbonyls. This indicates that to alleviate O₃ pollution, OFP-based control measures that target carbonyls might be more efficient than measures that target common VOCs. Priority should be given to emission controlling COC emissions, specifically those from medium- and large-scale catering. Formaldehyde, acetaldehyde, and hexanal were the key carbonyl species that form O₃ in the environment. Our findings imply that cooking-emitted carbonyls should not be overlooked in investigations of O₃ formation and that these compounds should be subject to strict regulations.

Evaporative emission characteristics of high-mileage gasoline vehicles

Evaporative emissions of vehicles are an essential source of atmospheric volatile organic compounds (VOCs), contributing to ozone contamination, especially in urban areas. Due to the outdated standards under which in-use vehicles were constructed and the ageing of control devices, high-mileage vehicles tend to produce an enormous amount of evaporative emissions. In this study, evaporative emissions from two high-mileage light-duty gasoline vehicles were quantified using VT-SHED, and their ozone-forming potential (OFP) values were calculated based on the identified VOC species. The results show that VOCs with high boiling points are released at low rates when the temperature inside the VT-SHED ranges from 20 to 28 °C. The release rates of all VOC species increase when the VT-SHED temperature is 28-35 °C. Diurnal loss dominates evaporative emissions from high-mileage gasoline vehicles, with the levels of VOCs quantified within this stage being 3-fold higher than those during the hot-soak stage. Only during the hot-soak stage, C11-C16 n-alkanes occupy an overall increased portion in the identified VOC inventory. OFP values of the two high-mileage vehicles exceeded 600.0 mgO₃/day during the 48-h diurnal-loss tests. The specific reactivity (SR) values of the diurnal-loss VOCs are deemed more relevant to fuel compositions because the two vehicles have the same fuel yield and close SR values of approximately 4.3 mgO₃/mgVOCs, despite different certification standards, potentially allowing for the use of unified SR values to ease the estimation of the ozone contamination of evaporative emissions from in-use fleets.

Tracer-based characterization of source variations of ambient isoprene mixing ratios in a hillocky megacity, India, influenced by the local meteorology

The ambient biogenic volatile organic compounds (BVOCs), mainly isoprene, are potentially involved in the formation of secondary pollutants, hence, they are significant in terms of air quality and climate. Although the largest sources of BVOCs are tropical regions, the measurements of isoprene in the Indian subcontinent are limited. We conducted the measurements of isoprene, benzene, and toluene at an urban site in a hillocky megacity of India using a high-sensitivity proton transfer reaction quadrupole mass spectrometer (PTR-QMS). The mixing ratios of isoprene were compared with those of aromatic compounds like benzene and toluene, which represent typical anthropogenic VOCs. Isoprene and isoprene/benzene (>5 ppbv ppbv^-1) showed higher levels in the pre-monsoon months, most likely due to large emissions by urban vegetation during physiological activities in plants which was enhanced by the high ambient temperatures and solar radiation. While Benzene and toluene showed higher mixing ratios during winter, which were due to shallower boundary layer depths and transport of air masses from polluted Indo-Gangetic Plain during this season. The mixing ratios of VOCs show significant diurnal variation as a result of their different origins and the role of different meteorological parameters. The robust emission ratios of isoprene/benzene obtained from nighttime data were used to separate the non-anthropogenic and anthropogenic isoprene emissions. ∼30% enhancement observed in non-anthropogenic emissions to isoprene from winter to pre-monsoon season when temperatures and solar radiation were stronger, although traffic in the city. Isoprene/benzene ratio at lower temperatures (<25 °C) and solar radiation (<100 W m^-2) was predominantly controlled by anthropogenic sources. Overall, toluene and isoprene are the most frequent species in terms of having the highest ozone-forming potential (OFP) values but biogenic isoprene became more important to ozone formation during the afternoon hours in the pre-monsoon months with high air temperatures (>25 °C).

Environmental and health risks of VOCs in the longest inner-city tunnel in Xi'an, Northwest China: Implication of impact from new energy vehicles

Traffic source-dominated volatile organic compound (VOC) samples were collected during four time-intervals in a day (Ⅰ: 7:30-10:30, Ⅱ: 11:00-14:00, Ⅲ: 16:30-19:30, and Ⅳ: 20:00-23:00) in a tunnel in summer, 2019, in Xi'an, China. The total measured VOC (TVOC) in periods Ⅰ and Ⅲ (rush hours, 107.2 ± 8.2 parts per billion by volume [ppbv]) was 1.8 times that in periods Ⅱ and Ⅳ (non-rush hours, 58.6 ± 13.8 ppbv), consistent with the variation in vehicle numbers in the tunnel. The considerably elevated ethane and ethylbenzene levels could have been attributed to emissions from compressed natural gas vehicles and the rapid development of methanol-fueled taxis in Xi'an in 2019. The mixing ratios of benzene, toluene, ethylbenzene, and xylenes (BTEX) contributed 9.4%-12.7% to TVOCs, and the contributions were nearly 40% higher in periods Ⅰ and Ⅲ than in Ⅱ and Ⅳ, indicating that BTEX levels were strongly affected by vehicle emissions. The indicators of motor vehicle emission, namely ethylene, propylene, toluene, m/p-xylenes, o-xylene, and propane, contributed to more than half of the ozone formation potential in this study. The noncarcinogenic risks of VOCs in this study were within the international safety standard, whereas the carcinogenic risks exceeded the standard by 2.3-4.6 times, suggesting that carcinogenic risks were more serious than noncarcinogenic risks. VOCs presented 2.2 and 1.4 times noncarcinogenic and carcinogenic risks during rush hours than during non-rush hours, respectively. Notably, the carcinogenic risk in period Ⅳ was comparable with that in period Ⅲ; however, the vehicle numbers and VOC mixing ratios were the lowest at night, which may have attributed to the increasing number and proportion of methanol M100-fueled vehicles in the tunnel. Therefore, VOCs emitted by new energy vehicles should also be seriously considered while evaluating fossil fuel vehicle emissions.

Identification, Expression, and Interaction Analysis of Ovate Family Proteins in Populus trichocarpa Reveals a Role of PtOFP1 Regulating Drought Stress Response

Ovate family proteins (OFPs) are a family of plant growth regulators that play diverse roles in many aspects of physiological processes. OFPs have been characterized in various plant species including tomato, Arabidopsis, and rice. However, little is known about OFPs in woody species. Here, a total of 30 PtOFP genes were identified from the genome of Populus trichocarpa and were further grouped into four subfamilies based on their sequence similarities. Gene expression analysis indicated that some members of the PtOFP gene family displayed tissue/organ-specific patterns. Analysis of cis-acting elements in the promoter as well as gene expression by hormone treatment revealed putative involvement of PtOFPs in hormonal response. Furthermore, PtOFP1 (Potri.006G107700) was further experimentally demonstrated to act as a transcriptional repressor. Yeast two-hybrid assay showed physical interactions of PtOFP1 with other proteins, which suggests that they might function in various cellular processes by forming protein complexes. In addition, overexpression of PtOFP1 in Arabidopsis conferred enhanced tolerance to PEG-induced drought stress at seedling stage, as well as a higher survival rate than the wild type at mature stage. These results provide a systematic analysis of the Populus OFP gene family and lay a foundation for functional characterization of this gene family.

Improved emissions inventory and VOCs speciation for industrial OFP estimation in China

Ozone (O₃) pollution is becoming increasingly serious in China. Reactivity-based control of volatile organic compounds (VOCs) is an efficient method of alleviating O₃ pollution. In this study, an improved industrial VOCs emissions inventory for China from 2011 to 2018 and local source profiles for six specific industries were developed to improve estimation of ozone formation potential (OFP). The results indicated that average annual growth rate for industrial VOCs emissions during 2015-2018 was lower than 2011-2014, which could be related to China's industrial structural upgrade and implementation of VOCs source control during the 13th Five-Year Plan period. The industrial coating, printing, basic organic chemical, gasoline storage and transport, and oil refinery industries were the key sources of VOCs emissions. M/p-xylene, toluene, ethyl benzene, propene, o-xylene, ethene, 1,2,4-trimethylbenzene, m-ethyl toluene, isopentane, and 1-butene were the top 10 species in terms of OFP. The top 20 species based on OFP accounted for an estimated 85% of total OFP and only 59% of emissions. The industrial coating, printing, basic organic chemical, oil refinery industries and other five sectors were the top 10 sources in terms of OFP, which together contributed 81% of total OFP. Priority should be given to the top 20 or more species with high reactivity and the top 10 sources based on OFP for future O₃ reductions in China.

Impact of VOCs emission from iron and steel industry on regional O3 and PM2.5 pollutions

Iron and steel industry emission is an important industrial source of air pollution. However, little is known about the relationship between volatile organic compounds (VOCs) emitted and regional air pollution. In this study, VOCs emissions from a typical iron and steel plant in Yangtze River Delta (YRD, China) were monitored from April 2018 to March 2019. The ozone formation potential (OFP) and secondary organic aerosol (SOA) formation of VOCs were calculated to reveal the influence of VOCs emissions on regional ozone and particulate pollution, and the sensitivity analysis approach was performed to explore the qualitative and quantitative relationships between VOCs and O₃, as well as VOCs and PM_2.5. The VOCs concentration was 93.76 ± 266.97 ppbv during the study. The OFP was 760.08 ± 2391.90 μg m^-3, and aromatics were the predominant precursors, contributing 54.05% of the total OFP. Furthermore, the SOA estimated by fractional aerosol coefficient (FAC) and time-resolved (TR) methods were 6.032 ± 13.347 μg m^-3 and 0.971 ± 4.650 μg m^-3, accounting for 8.65-26.39% (13.78 ± 7.46%) and 1.55-4.20% (2.22 ± 1.23%) of the PM_2.5 concentrations, respectively. The results indicated that VOCs were more sensitive to O₃ pollution in high pollution domains, whereas VOCs were more sensitive to PM_2.5 pollution in low pollution domains. We concluded that reducing VOCs emissions might be effective in alleviating photochemical pollution episodes in areas around iron and steel industry, and the haze pollution occurred in these regions may be caused by the primary emission of PM, and the contribution of SOA was relatively small.

Urban VOC profiles, possible sources, and its role in ozone formation for a summer campaign over Xi'an, China

To insight the urban volatile organic compound (VOC) profiles and its contribution to ozone, four-time per day (8:00-9:00, 15:00-16:00, 19:00-20:00, and 23:00-24:00) off-line VOC samples were collected from 16th July to 28th July 2018 for a summer investigation campaign over Xi'an, China. The diurnal variation was significant that the lowest TVOC concentrations were observed in the midnight period (28.4 ± 25.6 ppbv) while the highest was shown in the morning (49.6 ± 40.1 ppbv). The differences of total non-methane VOCs (TVOCs) between weekdays and weekend were also significant that the weekend showed significantly high VOC levels than weekdays (p < 0.05) but did not lead to significant ambient O₃ increase (p > 0.05). Isopentane, a general marker for vehicle exhaust, showed descending concentrations from morning to midnight and good correlation with vehicle numbers on road, indicating a potential source to the VOCs at this site. The results from PMF proved that vehicular exhaust was the largest source to the VOCs in this study (64.4%). VOC categories showed a reverse sequence in abundance of concentrations and OFP contributions that alkenes showed the highest OFPs although with the lowest abundance in TOVCs due to their high reactivity in photochemical reactions. High OFPs from ethylene and isopentane indicated that vehicular emissions could be the largest potential OFP source in this site. OFPs from isoprene (from 1.85 to 13.4 ppbv) indicated that biogenic VOCs should not be negligible in urban Xi'an city when controlling O₃ pollutants. Comparison of two OFP methods was conducted and MIR method was proved to be more reasonable and scientific in summer Xi'an. Therefore, vehicular emission, the largest contributor to ambient VOCs and also OFPs, as well as biological source should be priority controlled in guiding VOC emissions and reducing O₃ control policies.

Volatile organic compounds in a typical petrochemical industrialized valley city of northwest China based on high-resolution PTR-MS measurements: Characterization, sources and chemical effects

To scientifically understand the emissions and chemistry of volatile organic compounds (VOCs) in a typical petrochemical industrialized and dust-rich region of Northwest China, VOCs were measured at a receptor site in the Lanzhou Valley using a high-resolution online proton transfer reaction-mass spectrometer (PTR-MS). The ranking of VOC mixing ratios was methanol (32.72 ± 8.94 ppb) > acetaldehyde (5.05 ± 2.4 ppb) > acetic acid (3.42 ± 1.71 ppb). Lanzhou has higher oxygenated VOCs (OVOCs) mixing ratios (methanol and acetaldehyde) and lower aromatics levels (benzene, toluene and C8-aromatics) compared with other cities. The positive matrix factorization (PMF) model showed eight sources of VOCs as follows: (1) mixed industrial process-1 (13.5%), (2) secondary formation (13.2%), (3) mixed industrial process-2 (11.8%), (4) residential biofuel use and waste disposal (13.80%), (5) solvent usage (10.1%), (6) vehicular exhaust (11.8%), (7) biogenic (13.8%) and (8) biomass burning (12.0%). Both the PSCF and the CWT results of mixed industrial process-1 were mainly from the northeast of Lanzhou and the biomass burning was from the southeast; the other four sources (without secondary formation and biogenic) were mainly from the west and northwest of Lanzhou, which were associated with the dust area of the Gobi Desert. A trajectory sector analysis revealed that the local emissions contributed 64.9-71.1% to the VOCs. OVOCs accounted for 43% of the ozone production potential (OFP), and residential biofuel use and waste disposal (25.1%), mixed industrial process-2 (15.3%) and solvent usage (13.4%) appeared to be the dominant sources contributors to O₃ production. The rank of main secondary organic aerosols (SOA) precursors under low-NOx conditions is xylene > toluene > benzene > naphthalene > styrene > C10-aromatics > isoprene, while under high-NOx conditions, it is toluene > naphthalene > xylene > C10-aromatics > styrene > benzene > isoprene. Solvent usage and vehicular exhaust appeared to be the dominant contributors to SOA formation.

Characteristics of volatile organic compounds, NO2, and effects on ozone formation at a site with high ozone level in Chengdu

Chengdu is a megacity in the southwest of China with high ozone (O₃) mixing ratio. Observation of volatile organic compounds (VOCs), NO₂ and O₃ with high temporal resolution was conducted in Chengdu to investigate the chemical processes and causes of high O₃ levels. The hourly mixing ratios of VOCs, NO₂, and O₃ were monitored by an online system from 28 August to 7 October, 2016. According to meteorological conditions, Chengdu, with relative warm weather and low wind speed, is favorable to O₃ formation. Part of the O₃ in Chengdu may be transported from the downtown area. In O₃ episodes, the average mixing ratios of NO₂ and O₃ were 20.20 ppbv and 47.95 ppbv, respectively. In non-O₃ episodes, the average mixing ratios of NO₂ and O₃ were 16.38 ppbv and 35.15 ppbv, respectively. The average mixing ratio of total VOCs (TVOCs) was 40.29 ppbv in non-O₃ episodes, which was lower than that in O₃ episodes (53.19 ppbv). Alkenes comprised 51.7% of the total O₃ formation potential (OFP) in Chengdu, followed by aromatics which accounted for 24.2%. Ethylene, trans-pentene, propene, and BTEX (benzene, ethylbenzene, toluene, m/p-xylene, o-xylene) were also major contributors to the OFP in Chengdu. In O₃ episodes, intensive secondary formations were observed during the campaign. Oxygenated VOCs (OVOCs), such as acetone, Methylethylketone (MEK), and Methylvinylketone (MVK) were abundant. Isoprene rapidly converted to MVK and Methacrolein (MACR) during O₃ episodes. Acetone was mainly the oxidant of C3-C5 hydrocarbons.

Plant Organ Shapes Are Regulated by Protein Interactions and Associations With Microtubules

Plant organ shape is determined by the spatial-temporal expression of genes that control the direction and rate of cell division and expansion, as well as the mechanical constraints provided by the rigid cell walls and surrounding cells. Despite the importance of organ morphology during the plant life cycle, the interplay of patterning genes with these mechanical constraints and the cytoskeleton is poorly understood. Shapes of harvestable plant organs such as fruits, leaves, seeds and tubers vary dramatically among, and within crop plants. Years of selection have led to the accumulation of mutations in genes regulating organ shapes, allowing us to identify new genetic and molecular components controlling morphology as well as the interactions among the proteins. Using tomato as a model, we discuss the interaction of Ovate Family Proteins (OFPs) with a subset of TONNEAU1-recruiting motif family of proteins (TRMs) as a part of the protein network that appears to be required for interactions with the microtubules leading to coordinated multicellular growth in plants. In addition, SUN and other members of the IQD family also exert their effects on organ shape by interacting with microtubules. In this review, we aim to illuminate the probable mechanistic aspects of organ growth mediated by OFP-TRM and SUN/IQD via their interactions with the cytoskeleton.

Observation and analysis of atmospheric volatile organic compounds in a typical petrochemical area in Yangtze River Delta, China

Volatile organic compounds (VOCs) are a kind of important precursors for ozone photochemical formation. In this study, VOCs were measured from November 5th, 2013 to January 6th, 2014 at the Second Jinshan Industrial Area, Shanghai, China. The results showed that the measured VOCs were dominated by alkanes (41.8%), followed by aromatics (20.1%), alkenes (17.9%), and halo-hydrocarbons (12.5%). The daily trend of the VOC concentration showed a bimodal feature due to the rush-hour traffic in the morning and at nightfall. Based on the VOC concentration, a receptor model of Positive Matrix Factorization (PMF) coupled with the information related to VOC sources was applied to identify the major VOC emissions. The result showed five major VOC sources: solvent use and industrial processes were responsible for about 30% of the ambient VOCs, followed by rubber chemical industrial emissions (23%), refinery and petrochemical industrial emissions (21%), fuel evaporations (13%) and vehicular emissions (13%). The contribution of generalized industrial emissions was about 74% and significantly higher than that made by vehicle exhaust. Using a propylene-equivalent method, alkenes displayed the highest concentration, followed by aromatics and alkanes. Based on a maximum incremental reactivity (MIR) method, the average hourly ozone formation potential (OFP) of VOCs is 220.49 ppbv. The most significant source for ozone chemical formation was identified to be rubber chemical industrial emissions, following one by vehicular emission. The data shown herein may provide useful information to develop effective VOC pollution control strategies in industrialized area.

Ambient volatile organic compounds pollution in China

Owing to rapid economic and industrial development, China has been suffering from degraded air quality and visibility. Volatile organic compounds (VOCs) are important precursors to the formation of ground-level ozone and hence photochemical smog. Some VOCs adversely affect human health. Therefore, VOCs have recently elicited public concern and given new impetus to scientific interest. China is now implementing a series of polices to control VOCs pollution. The key to formulating policy is understanding the ambient VOCs pollution status. This paper mainly analyzes the species, levels, sources, and spatial distributions of VOCs in ambient air. The results show that the concentrations of ambient VOCs in China are much higher than those of developed countries such as the United States and Japan, especial benzene, which exceeds available standards. At the same time, the ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAFP) of various VOCs are calculated. Aromatics and alkenes have much higher OFPs, while aromatics have higher SOAFP. The OFPs of ambient VOCs in the cities of Beijing, Guangzhou and Changchun are very high, and the SOAFP of ambient VOCs in the cities of Hangzhou, Guangzhou and Changchun are higher.

Brassinosteroids Regulate OFP1, a DLT Interacting Protein, to Modulate Plant Architecture and Grain Morphology in Rice

Brassinosteroids (BRs) regulate important agronomic traits in rice, including plant height, leaf angle, and grain size. However, the underlying mechanisms remain not fully understood. We previously showed that GSK2, the central negative regulator of BR signaling, targets DLT, the GRAS family protein, to regulate BR responses. Here, we identified Ovate Family Protein 1 (OFP1) as a DLT interacting protein. OFP1 was ubiquitously expressed and the protein was localized in both cytoplasm and nucleus. Overexpression of OFP1 led to enlarged leaf angles, reduced plant height, and altered grain shape, largely resembled DLT overexpression plants. Genetic analysis showed that the regulation of plant architecture by OFP1 depends on DLT function. In addition, we found OFP1 was greatly induced by BR treatment, and OsBZR1, the critical transcription factor of BR signaling, was physically associated with the OFP1 promoter. Moreover, we showed that gibberellin synthesis was greatly repressed in OFP1 overexpression plants, suggesting OFP1 participates in the inhibition of plant growth by high BR or elevated BR signaling. Furthermore, we revealed that OFP1 directly interacts with GSK2 kinase, and inhibition of the kinase activity significantly promotes OFP1 protein accumulation in plant. Taken together, we identified OFP1 as an additional regulator of BR responses and revealed how BRs promote OFP1 at both transcription and protein levels to modulate plant architecture and grain morphology in rice.

A feasibility study of pelvic morphology for curved implants

OBJECTIVES

We hypothesize that inserting a curved intramedullary internal fixation device which follows curved osseous fixation paths (OFPs) would be more versatile and mechanically stronger than straight screws for fixation of pelvic ring and acetabular injuries. This study characterizes the dimensions of curved OFPs of the pelvic ring and acetabulum and suggests design parameters for such a curved device.

METHODS

CT scans of intact pelves of 50 female and 50 male subjects were studied using MIM Maestro™ and Solidworks™ to determine the constriction points (smallest cross sections) and the tightest radii of curvature (RoC) in the anterior column, posterior column, iliosacral and pubic symphysis OFPs.

RESULTS

The constriction point diameters for the superior pubic ramus and supra-acetabular areas were 13±3mm and 12±3mm, respectively. The anterior column RoC was greater than 65mm in all cases. The minimum observed RoC for the path from one ilium, across the SI joint, the sacrum and to the other ilium was 71mm, with 99% of the cases having a RoC of at least 80mm, in both the inlet and outlet views.

CONCLUSION

This study shows that if a flexible implant which could be stiffened once in place was available, it would enable the use of larger and longer fixation taking advantage of the pelvis's curved intracortical spaces. Even for dysmorphic pelves, accessible tunnels support a long, strong, curved fixation device.

Rice Ovate Family Protein 2 (OFP2) alters hormonal homeostasis and vasculature development

OFP (Ovate Family Protein) is a transcription factor family found only in plants. In dicots, OFPs control fruit shape and secondary cell wall biosynthesis. OFPs are also thought to function through interactions with KNOX and BELL transcription factors. Here, we have functionally characterized OsOFP2, a member of the OFP subgroup associated with regulating fruit shape. OsOFP2 was found to localize to the nucleus and to the cytosol. A putative nuclear export signal was identified within the OVATE domain and was required for the localization of OsOFP2 to distinct cytosolic spots. Rice plants overexpressing OsOFP2 were reduced in height and exhibited altered leaf morphology, seed shape, and positioning of vascular bundles in stems. Transcriptome analysis indicated disruptions of genes associated with vasculature development, lignin biosynthesis, and hormone homeostasis. Reduced expression of the gibberellin biosynthesis gene GA 20-oxidase 7 coincided with lower gibberellin content in OsOFP2 overexpression lines. Also, we found that OsOFP2 was expressed in plant vasculature and determined that putative vascular development KNOX and BELL proteins interact with OsOFP2. KNOX and BELL genes are known to suppress gibberellin biosynthesis through GA20ox gene regulation and can restrict lignin biosynthesis. We propose that OsOFP2 could modulate KNOX-BELL function to control diverse aspects of development including vasculature development.

Speciated OVOC and VOC emission inventories and their implications for reactivity-based ozone control strategy in the Pearl River Delta region, China

The increasing ground-ozone (O3) levels, accompanied by decreasing SO2, NO2, PM10 and PM2.5 concentrations benefited from air pollution control measures implemented in recent years, initiated a serious challenge to control Volatile Organic Compound (VOC) emissions in the Pearl River Delta (PRD) region, China. Speciated VOC emission inventory is fundamental for estimating Ozone Formation Potentials (OFPs) to identify key reactive VOC species and sources in order to formulate efficient O3 control strategies. With the use of the latest bulk VOC emission inventory and local source profiles, this study developed the PRD regional speciated Oxygenated Volatile Organic Compound (OVOC) and VOC emission inventories to identify the key emission-based and OFP-based VOC sources and species. Results showed that: (1) Methyl alcohol, acetone and ethyl acetate were the major constituents in the OVOC emissions from industrial solvents, household solvents, architectural paints and biogenic sources; (2) from the emission-based perspective, aromatics, alkanes, OVOCs and alkenes made up 39.2%, 28.2%, 15.9% and 10.9% of anthropogenic VOCs; (3) from the OFP-based perspective, aromatics and alkenes become predominant with contributions of 59.4% and 25.8% respectively; (4) ethene, m/p-xylene, toluene, 1,2,4-trimethyl benzene and other 24 high OFP-contributing species were the key reactive species that contributed to 52% of anthropogenic emissions and up to 80% of OFPs; and (5) industrial solvents, industrial process, gasoline vehicles and motorcycles were major emission sources of these key reactive species. Policy implications for O3 control strategy were discussed. The OFP cap was proposed to regulate VOC control policies in the PRD region due to its flexibility in reducing the overall OFP of VOC emission sources in practice.

Phylogenetic analyses provide the first insights into the evolution of OVATE family proteins in land plants

BACKGROUND AND AIMS

The OVATE gene encodes a nuclear-localized regulatory protein belonging to a distinct family of plant-specific proteins known as the OVATE family proteins (OFPs). OVATE was first identified as a key regulator of fruit shape in tomato, with nonsense mutants displaying pear-shaped fruits. However, the role of OFPs in plant development has been poorly characterized.

METHODS

Public databases were searched and a total of 265 putative OVATE protein sequences were identified from 13 sequenced plant genomes that represent the major evolutionary lineages of land plants. A phylogenetic analysis was conducted based on the alignment of the conserved OVATE domain from these 13 selected plant genomes. The expression patterns of tomato SlOFP genes were analysed via quantitative real-time PCR. The pattern of OVATE gene duplication resulting in the expansion of the gene family was determined in arabidopsis, rice and tomato.

KEY RESULTS

Genes for OFPs were found to be present in all the sampled land plant genomes, including the early-diverged lineages, mosses and lycophytes. Phylogenetic analysis based on the amino acid sequences of the conserved OVATE domain defined 11 sub-groups of OFPs in angiosperms. Different evolutionary mechanisms are proposed for OVATE family evolution, namely conserved evolution and divergent expansion. Characterization of the AtOFP family in arabidopsis, the OsOFP family in rice and the SlOFP family in tomato provided further details regarding the evolutionary framework and revealed a major contribution of tandem and segmental duplications towards expansion of the OVATE gene family.

CONCLUSIONS

This first genome-wide survey on OFPs provides new insights into the evolution of the OVATE protein family and establishes a solid base for future functional genomics studies on this important but poorly characterized regulatory protein family in plants.

Analytical use of multi-protein Fluorescence Resonance Energy Transfer to demonstrate membrane-facilitated interactions within cytokine receptor complexes

Experiments measuring Fluorescence Resonance Energy Transfer (FRET) between cytokine receptor chains and their associated proteins led to hypotheses describing their organization in intact cells. These interactions occur within a larger protein complex or within a given nano-environment. To illustrate this complexity empirically, we developed a protocol to analyze FRET among more than two fluorescent proteins (multi-FRET). In multi-FRET, we model FRET among more than two fluorophores as the sum of all possible pairwise interactions within the complex. We validated our assumption by demonstrating that FRET among pairs within a fluorescent triplet resembled FRET between each pair measured in the absence of the third fluorophore. FRET between two receptor chains increases with increasing FRET between the ligand-binding chain (e.g., IFN-γR1, IL-10R1 and IFN-λR1) and an acylated fluorescent protein that preferentially resides within subsections of the plasma membrane. The interaction of IL-10R2 with IFN-λR1 or IL-10R1 results in decreased FRET between IL-10R2 and the acylated fluorescent protein. Finally, we analyzed FRET among four fluorescent proteins to demonstrate that as FRET between IFN-γR1 and IFN-γR2 or between IFN-αR1 and IFN-αR2c increases, FRET among other pairs of proteins changes within each complex.

Improving the spectral analysis of Fluorescence Resonance Energy Transfer in live cells: application to interferon receptors and Janus kinases

The observed Fluorescence Resonance Energy Transfer (FRET) between fluorescently labeled proteins varies in cells. To understand how this variation affects our interpretation of how proteins interact in cells, we developed a protocol that mathematically separates donor-independent and donor-dependent excitations of acceptor, determines the electromagnetic interaction of donors and acceptors, and quantifies the efficiency of the interaction of donors and acceptors. By analyzing large populations of cells, we found that misbalanced or insufficient expression of acceptor or donor as well as their inefficient or reversible interaction influenced FRET efficiency in vivo. Use of red-shifted donors and acceptors gave spectra with less endogenous fluorescence but produced lower FRET efficiency, possibly caused by reduced quenching of red-shifted fluorophores in cells. Additionally, cryptic interactions between jellyfish FPs artefactually increased the apparent FRET efficiency. Our protocol can distinguish specific and nonspecific protein interactions even within highly constrained environments as plasma membranes. Overall, accurate FRET estimations in cells or within complex environments can be obtained by a combination of proper data analysis, study of sufficient numbers of cells, and use of properly empirically developed fluorescent proteins.

Ligand-independent interaction of the type I interferon receptor complex is necessary to observe its biological activity

Ectopic coexpression of the two chains of the Type I and Type III interferon (IFN) receptor complexes (IFN-αR1 and IFN-αR2c, or IFN-λR1 and IL-10R2) yielded sensitivity to IFN-alpha or IFN-lambda in only some cells. We found that IFN-αR1 and IFN-αR2c exhibit FRET only when expressed at equivalent and low levels. Expanded clonal cell lines expressing both IFN-αR1 and IFN-αR2c were sensitive to IFN-alpha only when IFN-αR1 and IFN-αR2c exhibited FRET in the absence of human IFN-alpha. Coexpression of RACK-1 or Jak1 enhanced the affinity of the interaction between IFN-αR1 and IFN-αR2c. Both IFN-αR1 and IFN-αR2c exhibited FRET with Jak1 and Tyk2. Together with data showing that disruption of the preassociation between the IFN-gamma receptor chains inhibited its biological activity, we propose that biologically active IFN receptors require ligand-independent juxtaposition of IFN receptor chains assisted by their associated cytosolic proteins.