Temporal and spatial far-ultraviolet disinfection of exhaled bioaerosols in a mechanically ventilated space

Investigation of Far-UVC (222 nm) disinfection of bioaerosols deposited on surfaces with different material properties

Far-ultraviolet C (UVC) light has demonstrated its ability to inactivate microbes on surfaces. However, the factors influencing the efficacy of far-UVC surface disinfection remain unclear. This study aimed to explore the effects of material properties on far-UVC disinfection of bioaerosols (represented by Escherichia coli (E. coli)) deposited on surfaces. The susceptibility constants (Z-values) of E. coli on 14 common materials were measured and analyzed. Additionally, five possible influencing factors (roughness, pores, electrostatic charge, wetness, and temperature) related to surface properties were investigated by control experiments. The results show that far-UVC light effectively disinfected E. coli on the 14 materials, with disinfection efficiencies ranging from 69.1% to 98.9% under a dose of 100.8 J/m2. Surface roughness and electrostatic charges had negligible influence on far-UVC disinfection of E. coli on surfaces. However, for porous materials, pore sizes larger than the E. coli size resulted in lower Z-values. Higher surface wetness decreased both the Z-value and natural decay rate. Meanwhile, a higher surface temperature of 40 °C resulted in a higher Z-value and natural decay rate. The results can improve our understanding of far-UVC disinfection of microbes on surfaces, and the database can be used for numerical models.

Enhancing the effectiveness of bioaerosol disinfection in indoor environments by optimizing far-UVC lamp locations based on Markov chain model

Far-ultraviolet C (far-UVC) light is an effective and safe disinfection method for bioaerosol control in occupied indoor environments. The installation location of a far-UVC lamp strongly influences the spatial distribution of far-UVC irradiance, and thus the effectiveness of bioaerosol disinfection. To assist the design process, this study developed a fast prediction approach based on the Markov chain model for optimizing the installation locations of far-UVC lamps in order to enhance the disinfection effectiveness for indoor bioaerosol control. Experiments were conducted in an environmental chamber to validate the proposed simulation-based optimization approach. The results show that the proposed method can correctly predict the disinfection efficiency when compared with experimental data, and optimizing the installation location of the far-UVC lamp increased the disinfection efficiency by 54 % compared with the worst location. As an application, the validated method was then used to design the installation location of a far-UVC lamp in a real conference room. The results show that installing the far-UVC lamp in the optimal location can increase the disinfection efficiency by 48 % compared with the worst installation location. Therefore, optimizing the far-UVC lamp location using the proposed Markov chain model can enhance the effectiveness of bioaerosol disinfection in indoor environments.

Risk mitigation to healthcare workers against viral and bacterial bioaerosol load in laparoscopic surgical exhaust with a new flow mode in hollow fiber membranes-based filter

Laparoscopy of COVID-19-infected/suspected patients needs to be performed with the utmost care due to the chances of virus carryover through the pneumoperitoneum gas. In this study, polysulfone/polyvinyl-pyrrolidone hollow fiber membranes (HFMs) were fabricated by phase inversion process, and these HFMs were bundled into a module consisting of tortuous, circular-helical arrangement. Further, copper (Cu) and zinc (Zn) nanoparticles (NPs), known to have antimicrobial and antiviral properties, were flow-coated on the lumen side of the HFMs. To test functional efficiency, the modules were challenged with wet aerosol and bioaerosols. Wet aerosol removal efficiency was ∼98%. Bioaerosol-containing bacteria E. coli strain K-12, showed 2.6 log (∼99.8%), and 2.1 log (∼99.3%) removal efficiency for Cu NPs and Zn NPs coated HFMs modules, respectively, and 1.6 log (∼97%) removal for plain (uncoated) HFMs. Bioaerosols containing SARS-CoV-2 surrogate virus (MS2 bacteriophage) showed ∼5-7 log reduction of bacteriophage for plain HFMs, 3.9 log, and 2.3 log reduction for Cu and Zn coated HFMs, respectively. The flow of aerosols entirely through the HFM lumen helps in attaining a low ΔP of < 1 mm Hg, thus rendering its usefulness, particularly for exhausting pneumoperitoneum gases where high upstream pressures could lead to barotrauma. STATEMENT OF ENVIRONMENTAL IMPLICATION: Surgical smoke is generated during minimally invasive surgical (MIS) procedure such as laparoscopy when electrosurgical devices are used to cut any tissues. This smoke is a hazard as it contains toxic volatile compounds, mutagens, carcinogens, bacteria, and virus-laden aerosols. Infection to healthcare professionals through the bioaerosols containing smoke is well reported in literature. The limitation of using hypochlorite and pleated/HEPA filter, led us to design a low pressure drop bioaerosol filter, which can remove smoke, tissue fragments, and COVID-19 virus. It provides a much safer operation theatre environment during MIS procedures as well as in general for bioaerosol removal.

Evaluation of intervention measures in reducing the driver's exposure to respiratory particles in a taxi with infected passengers

In the fifth wave of the COVID-19 epidemic in Hong Kong in early 2022, the large number of infected persons caused a shortage of ambulances and transportation vehicles operated by the government. To solve the problem, taxi drivers were recruited to transport infected persons to hospitals in their taxis. However, many of the drivers were infected after they began to participate in the plan. To tackle this issue, the present study numerically evaluated the effectiveness of several intervention measures in reducing the infection risk for taxi drivers. First, experiments were conducted inside a car to validate the large-eddy simulation (LES)-Lagrangian model for simulation of particle transport in a car. The validated model was then applied to calculate the particle dispersion and deposition in a Hong Kong taxi with intervention measures that included opening windows, installing partitions, and using a far-UVC lamp. The results show that opening the windows can significantly reduce the driver's total exposure by 97.4 %. Installing partitions and using a far-UVC lamp can further reduce the infection risk of driver by 55.9 % and 32.1 %, respectively. The results of this study can be used to support the implementation of effective intervention measures to protect taxi drivers from infection.

The impact of high background particle concentration on the spatiotemporal distribution of Serratia marcescens bioaerosol

Airborne transmission is a well-established mode of dissemination for infectious diseases, particularly in closed environments. However, previous research has often overlooked the potential impact of background particle concentration on bioaerosol characteristics. We compared the spatial and temporal distributions of bioaerosols under two levels of background particle concentration: heavily polluted (150-250 μg/m3) and excellent (0-35 μg/m3) in a typical ward. Serratia marcescens bioaerosol was adopted as a bioaerosol tracer, and the bioaerosol concentrations were quantified using six-stage Andersen cascade impactors. The results showed a significant reduction (over at least 62.9%) in bioaerosol concentration under heavily polluted levels compared to excellent levels at all sampling points. The temporal analysis also revealed that the decay rate of bioaerosols was higher (at least 0.654 min-1) under heavily polluted levels compared to excellent levels. These findings suggest that background particles can facilitate bioaerosol removal, contradicting the assumption made in previous research that background particle has no effect on bioaerosol characteristics. Furthermore, we observed differences in the size distribution of bioaerosols between the two levels of background particle concentration. The average bioaerosols size under heavily polluted levels was found to be higher than that under excellent levels, and the average particle size under heavily polluted levels gradually increased with time. In conclusion, these results highlight the importance of considering background particle concentration in future research on bioaerosol characteristics.

Abundance and cultivable bioaerosol transport from a municipal solid waste landfill area and its risks

Municipal solid waste (MSW) landfills, constituting the third largest anthropogenic sources of bioaerosols, are suspected to be one of the major contributors to adverse health outcomes. A regional modeling of aerosol trajectories based on wind-tunnel observations and on-site monitoring was newly-developed to uncover the impacts of a typical MSW landfill on ambient bioaerosol pollution. Results showed that the horizontal diffusion velocity of bioaerosols reached 4.33 times higher than the vertical velocity under surface calm winds. On-site monitoring revealed that the concentrations of particulate matter (PM) with a diameter of 10 μm were 3.05 times higher than those of PM1.0 in the 2.8-km downwind residential regions near the MSW landfill. With the increase in PM concentration, higher-abundance microorganisms were detected. A number of cultivable bacterial species (Micrococcus endophyticus, Micrococcus flavus, Bacillus sporothermodurans, Salmonella entericaserovar typhi, Rhodococcus hoagie, Blastococcups) and fungal species (Aspergillus niger, Penicillium, Microascus cirrosus, Cochliobolus, Stemphylium vesicarium) were identified in these bioaerosols. Furthermore, distinguished by transmission electron microscopy, a longer-range transported microorganism (E. coli) clinging onto suspended PM was observed, signifying higher exposure risks. Human health risk assessments demonstrate that the residents and occupational workers in the vicinity of MSW landfill endured atmospheric diffusion-induced bioaerosol exposure risks due to open dumping activities in MSW landfill. This study clearly indicates bioaerosol pollution from landfills, and people particularly living nearby the MSW facilities, must decrease outdoor activities during dusty days.