Spontaneous intra-electron transfer within rGO@Fe2O3-MnO catalyst promotes long-term NOx reduction at ambient conditions

Redox mediators boost NOx reduction via trade-off electron charges using a cube-shaped (cMn@rGO) catalyst; mechanism and electrochemical study

Gaseous pollutants like sulfur dioxide and nitrogen oxide(s) (SO2, NOx) have been increasing exponentially for the last two decades, which have had adverse effects on human health, aquatic life, and the environment. Recently, for air pollution taming, manganese/oxide (Mn/MnO) has become a very promising heterogeneous catalyst due to its environment-friendly, low-price, and remarkable catalytic abilities for toxic gases. In this work, cube-shaped Mn nanoparticles (cMn NPs) were decorated on the surface of reduced graphene oxide (rGO) by the solvothermal method. The resulting cMn@rGO composite was employed for electrochemical NOx reduction. However, the microscopic (TEM/HRTEM) and structural analysis were utilised to investigate the morphology and characteristics of the cMn@rGO composite. This electrochemical-based treatment for NOx reduction is employed by using electron shuttle or redox mediators. Here, four distinct redox mediators are used to address electrochemical obstacles, which effectively facilitate electron transportation and promoted NOx reduction on the electrode surface. These mediators not only significantly enhanced the NOx conversion into valuable products, i.e., N2 and N2O, but also made the process smooth with high performance. Among these mediators, neutral red (N.R) exhibited extraordinary potential in enhancing NOx reduction. The obtained results indicated that the remarkable catalytic performance (∼93%) of the cMn@rGO can be attributed to several factors, including the catalyst's three-dimensional architecture structure and abundant active sites. The designed catalyst (cMn@rGO) is not only cost-effective and sustainable but also exhibits excellent potential in effectively reducing NOx, which could be beneficial for large-scale NOx abatement.

Synthesis of phytostabilized zinc oxide nanoparticles and their effects on physiological and anti-oxidative responses of Zea mays (L.) under chromium stress

Chromium (Cr) is a hazardous metal that has a significant risk of transfer from soil to edible parts of food crops, including shoot tissues. Reduction of Cr accumulation is required to lower the risk of Cr-exposed in humans and animals feeding on metal-contaminated parts of such plant. Zea mays is a global staple crop irrigated intensively with Cr-contaminated water. Consequently, the objective of this study was to investigate that FI-stabilized ZnO NPs could be used as an eco-friendly and efficient amendment to reduced Cr uptake and toxicity in Zea mays. To investigate the growth parameters, physiological, oxidative stress and biochemical parameters under different Cr-VI concentrations (10.0, 15.0, and 20.0 ppm). Cr exposed Z. mays plants exhibited substantially reduced plant biomass, chlorophyll contents, and altered antioxidant enzyme activity compared to untreated control. The results revealed that foliar application of Fagonia-ZnO-NPs helps eliminate the harmful effects of Cr (VI), which can enter plants through soil pollution. Increased levels of proline, soluble sugars and various antioxidant enzymes reflected this. Mean comparisons showed that Cr stress led to a 33-50% reduction in fresh shoot weight, 73-170% in fresh root weight, 16-34% shoot length, 9.5-129% root length, Chlorophyll contents 20-33% (Chl a), 18-27% (Chl b) and 17-27% (car), 14-33% total soluble sugars, 54-170% proline content, 7-7.5% POD, 0.66-75% CAT and 32-77% APX enzyme activities compared to untreated plants. Application of FI-stabilized ZnO NPs led to an increase 21-77% in fresh shoot weight, 22-45%, fresh root weight, 3-35% shoot length, 24-154% root length, Chlorophyll contents 39-60% (Chl a), 15-79% (Chl b) and 28-82% (car), 19-52% total soluble sugars, 21-55% proline content, 14-43% POD, 34-95% CAT and 130-186% APX enzyme activities under 10, 15 and 20 ppm Cr stress respectively, compared to Cr-treated plants. However, the principal component analysis revealed that chlorophyll contents, carotenoid, CAT, APX and length were in the same group and showed a positive correlation. These data collectively suggest that phytostabilized zinc oxide NPs may be an eco-friendly solution to mitigate Cr toxicity in agricultural soils and crop plants.

Hematite: A Good Catalyst for the Thermal Decomposition of Energetic Materials and the Application in Nano-Thermite

Metal oxides (MOs) are of great importance in catalysts, sensor, capacitor and water treatment. Nano-sized MOs have attracted much more attention because of the unique properties, such as surface effect, small size effect and quantum size effect, etc. Hematite, an especially important additive as combustion catalysts, can greatly speed up the thermal decomposition process of energetic materials (EMs) and enhance the combustion performance of propellants. This review concludes the catalytic effect of hematite with different morphology on some EMs such as ammonium perchlorate (AP), cyclotrimethylenetrinitramine (RDX), cyclotetramethylenete-tranitramine (HMX), etc. The method for enhancing the catalytic effect on EMs using hematite-based materials such as perovskite and spinel ferrite materials, making composites with different carbon materials and assembling super-thermite is concluded and their catalytic effects on EMs is also discussed. Therefore, the provided information is helpful for the design, preparation and application of catalysts for EMs.

Electrochemical corrosion resistance of aluminum alloy 6101 with cerium-based coatings in an alkaline environment

Chromium-free materials as eco-friendly coatings with higher corrosion resistance are crucial in various industrial processes. Herein, we report the deposition of cerium-based conversion, a chromium-free, eco-friendly chemical conversion coating for aluminum alloy 6101, by the dip coating method. Immersion in cerium salt precursors assisted with hydrogen peroxide was performed for the deposition of cerium-based conversion coatings on aluminum alloy 6101 at different bathing temperatures. The electrochemical corrosion behavior was assessed in an alkaline solution of sodium hydroxide (pH 11), including mass loss measurements, free corrosion risk, polarization, and electrochemical impedance spectroscopy. X-ray diffraction and photoelectron spectroscopy analysis showed that the coatings were composed of Ce (III) and Ce (IV) oxides. Surface modifications and surface degradation of the coating and substrate after immersion in corrosive media were analyzed by scanning electron microscopy. Additionally, energy dispersive scanning analysis demonstrated the elemental composition before and after corrosion of the cerium salt conversion-based coating. The results demonstrated that selectively deposited cerium-based conversion coatings improved the corrosion resistance by up to 96% in a strong corrosive alkaline media.