Characterization of pregnant women exposure to halogenated parabens and bisphenols through water consumption

Estrogenic compounds in drinking water: A systematic review and risk analysis

Estrogenic compounds are the endocrine disruptors that receive major attention because of their ability to imitate the natural female hormone, 17β-estradiol and cause adverse effects on the reproductive system of animals. The presence of estrogenic compounds in drinking water is a warning to assess the risks to which human beings are exposed. The present work has the objectives of carrying out a systematic review of studies that investigated estrogenic compounds in drinking water around the world and estimate the human health and estrogenic activity risks, based on the concentrations of each compound reported. The systematic review returned 505 scientific papers from the Web of Science®, SCOPUS® and PubMED® databases and after careful analysis, 45 papers were accepted. Sixteen estrogenic compounds were identified in drinking water, from the classes of hormones, pharmaceutical drugs and personal care products, plasticizers, corrosion inhibitors, pesticides and surfactants. Di-(2-ethylhexyl) phthalate (DEHP) was the compound found at the highest concentration, reaching a value of 1.43 mg/L. Non-carcinogenic human health risk was classified as high for 17α-ethynilestradiol and DEHP, medium for dibutyl phthalate, and low for bisphenol A. The estrogenic activity risks were negligible for all the compounds, except DEHP, with a low risk. None of the estrogenic compounds presented an unacceptable carcinogenic risk, due to estrogenic activity. However, the risk assessment did not evaluate the interactions between compounds, that occurs in drinking water and can increase the risks and adverse effects to human health. Nonetheless, this study demonstrates the need for improvement of drinking water treatment plants, with more efficient technologies for micropollutant removal.

β-cyclodextrin/spiropyran-functionalized optical-driven hydrogel film for bisphenol A detection in food packaging

Bisphenol A (BPA), an endocrine disruptor, is widely used in food packaging materials, including drink containers. Sensitive detection of BPA is crucial to food safety. Herein, we have developed a novel optical-driven hydrogel film sensor for sensitive BPA detection based on the displacement of spiropyran (SP) from β-cyclodextrin (β-CD) cavity by BPA followed by the photochromism of the released SP. The released SP converts to the ring-opened merocyanine form which shows an enhanced red fluorescence in the dark. The sensor demonstrates a linear detection range from 0.1 to 20 μg mL-1 with a limit of detection at 0.027 μg mL-1 and a limit of quantification at 0.089 μg mL-1. Notably, the proposed β-CD/SP hydrogel can be reused due to the reversible isomerization of SP and the reversible host-guest interaction. This sensor also shows good performance for BPA determination in real samples, indicating its great potential for food safety monitoring.

Analytical methods and biomonitoring results in hair for the assessment of exposure to endocrine-disrupting chemicals: A literature review

Endocrine-disrupting chemicals (EDC) are compounds that alter functions of the endocrine system due to their ability to mimic or antagonize endogenous hormones, or that alter their synthesis and metabolism, causing adverse health effects. Human biomonitoring (HBM) is a reliable method to assess human exposure to chemicals through measurement in human body fluids and tissues. It identifies new sources of exposure and determines their distribution, thereby enabling detection of the most exposed populations. Blood and urine are commonly used for HBM of EDC, but their interest is limited for compounds presenting short half-lives. Hair appears as an interesting alternative insofar as it provides a large exposure window. For the present study, we evaluated the relevance of hair in determining EDC exposure. With this in mind, we undertook a literature review focusing on the bioanalytical aspects and performances of methods developed to determine EDC in hair. The literature review was performed through methodical bibliographical research. Relevant articles were identified using two scientific databases: PubMed and Web of Science, with search equations built from a combination of keywords, MeSH terms and Boolean operators. The search strategy identified 2949 articles. After duplicates were removed, and following title, abstract, and full-text screenings, only 31 were included for qualitative synthesis. Hair collection was mainly performed in the back of the head and preparation involved two processes: cutting into small pieces or grounding to powder. The off-line LC-MS/MS method remains the main technique used to assess EDC through hair. Differences regarding the validation of analytical methods and interpretation of HBM results were highlighted, suggesting a need for international harmonisation to obtain reliable and comparable results. External contamination of hair was identified as a main limitation in the interpretation of results, highlighting the need to better understand EDC transfers through hair and to develop relevant hair decontamination processes.

Formation of halogenated forms of bisphenol A (BPA) in water: Resolving isomers with ion mobility - mass spectrometry and the role of halogenation position in cellular toxicity

Halogenated BPA (XBPA) forms resulting from water chlorination can lead to increased toxicity and different biological effects. While previous studies have reported the occurrence of different XBPAs, analytical limitation have hindered the analysis and differentiation of the many potential isomeric forms. Using online solid-phase extraction - liquid chromatography - ion-mobility - high-resolution mass spectrometry (OSPE-LC-IM-HRMS), we demonstrated a rapid analysis method for the analysis of XBPA forms after water chlorination, with a total analysis time of less than 10 min including extraction and concentration and low detection limits (∼5-80 ng/L range). A multi in-vitro bioassay testing approach for the identified products revealed that cytotoxicity and bioenergetics impacts were largely associated with the presence of halogen atoms at positions 2 or 2' and the overall number of halogens incorporated into the BPA molecule. Different XBPA also showed distinct impacts on oxidative stress, peroxisome proliferator-activated receptor gamma - PPARγ, and inflammatory response. While increased DNA damage was observed for chlorinated water samples (4.14 ± 1.21-fold change), the additive effect of the selected 20 XBPA studied could not explain the increased DNA damage observed, indicating that additional species or synergistic effects might be at play.

Comprehensive characterization and prioritization of halogenated organic compounds in fish and their implications for exposure

Fish are an important pollution indicator for biomonitoring of halogenated organic compounds (HOCs) in aquatic environments, and HOCs in fish may pose health threats to consumers. This study performed nontarget and comprehensive analyses of HOCs in fish from an e-waste recycling zone by gas chromatography-high-resolution mass spectrometry, and further prioritized their human exposure risks. A total of 1652 formulas of HOCs were found in the fish, of which 1222, 117, and 313 were organochlorines, organobromines, and organochlorine-bromines, respectively. The total concentrations of HOCs were 15.4-18.7 μg/g (wet weight), and organobromines were the predominant (14.1-16.8 μg/g). Of the HOCs, 41 % were elucidated with tentative structures and divided into 13 groups. The estimated total daily exposures of HOCs via dietary consumption of the fish for local adult residents were 3082-3744 ng/kg bw/day. The total exposures were dominated by several groups of HOCs with the following contribution order: polyhalogenated biphenyls and their derivatives > polyhalogenated diphenyl ethers > halo- (H-)alkanes/olefines > H-benzenes > H-dioxins > H-polycyclic aromatic hydrocarbons > H-phenols. The comprehensive characterization and prioritization results provide an overview of the species and distributions of HOCs in edible fish, and propose an inventory of crucial HOCs associated with high exposure risks.

A fluorescent method for bisphenol A detection based on enzymatic oxidation-mediated emission quenching of silicon nanoparticles

As a common raw material of industrial products, bisphenol A (BPA) is widely used in the production of food contact materials, and there is a high risk of exposure in food. However, BPA is a well-known endocrine disruptor and poses a serious threat to human health. Herein, a fluorescent sensing platform of BPA based on enzymatic oxidation-mediated fluorescence quenching of silicon nanoparticles (SiNPs) is established and used to the detection of BPA in food species. The SiNPs are prepared with a facile one-step synthesis and emit bright green fluorescence. BPA can be oxidized by horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) to form a product which can quench the fluorescence of SiNPs through electron transfer. There is a good linear relationship between the fluorescence intensity and BPA concentration in the range of 1-100 μM. Therefore, a fluorometry of BPA is established with a low limit of detection (LOD) of 0.69 μM. This method has been applied to the determination of BPA in mineral drinking water, orange juice, and milk with satisfactory results. The fluorescent sensor of BPA based on SiNPs has favorable application foreground in the field of food safety analysis.

Machine learning-driven 3D plasmonic cellulose sensor for in situ rapid SERS detection of bisphenol compounds in water sample

Rapid component separation and accurate identification of bisphenols compounds (BPs) in real water sample remain an attractive challenge due to the trace amounts and structural similarities of BPs, and complexity of real samples. Here, we designed and synthesized chemically modified cellulose p-toluenesulfonate (CTSA) to encapsulate octadecylamine-modified gold nanoparticles (Au-ODA), obtaining 3D plasmonic cellulose (Au@CTSA). Simultaneously, by virtue of the high surface area in the 3D network of CTSA and the solvent volatile deposition, BPs in water were in situ extracted and concentrated in Au@CTSA microspheres. Since the 3D network of Au@CTSA supports the formation of "hotspots", the number of "hotspots" available is greatly improved, enabling excellent SERS detection of BPs. Based on the collected SERS spectra, machine learning was utilized to analyze the overall profile of BPs, which eliminated the subjective judgment of the concentration by the Au@CTSA sensor using a single characteristic peak. In this way, the accuracy of identification of BPs was significantly improved. The machine learning-driven Au@CTSA sensor realized the detection of traces bisphenol A (BPA), bisphenol S (BPS), and bisphenol F (BPF) in water sample, pushing quantitative detection of different concentrations of BPs and contributing facile indicators for water quality monitoring.