'Putting flesh back onto the bones?' Can we predict soft tissue properties from skeletal and fossil remains?

Static versus dynamic muscle modelling in extinct species: a biomechanical case study of the Australopithecus afarensis pelvis and lower extremity

The force a muscle generates is dependent on muscle structure, in which fibre length, pennation angle and tendon slack length all influence force production. Muscles are not preserved in the fossil record and these parameters must be estimated when constructing a musculoskeletal model. Here, we test the capability of digitally reconstructed muscles of the Australopithecus afarensis model (specimen AL 288-1) to maintain an upright, single-support limb posture. Our aim was to ascertain the influence that different architectural estimation methods have on muscle specialisation and on the subsequent inferences that can be extrapolated about limb function. Parameters were estimated for 36 muscles in the pelvis and lower limb and seven different musculoskeletal models of AL 288-1 were produced. These parameters represented either a 'static' Hill-type muscle model (n = 4 variants) which only incorporated force, or instead a 'dynamic' Hill-type muscle model with an elastic tendon and fibres that could vary force-length-velocity properties (n = 3 variants). Each muscle's fibre length, pennation angle, tendon slack length and maximal isometric force were calculated based upon different input variables. Static (inverse) simulations were computed in which the vertical and mediolateral ground reaction forces (GRF) were incrementally increased until limb collapse (simulation failure). All AL 288-1 variants produced somewhat similar simulated muscle activation patterns, but the maximum vertical GRF that could be exerted on a single limb was not consistent between models. Three of the four static-muscle models were unable to support >1.8 times body weight and produced models that under-performed. The dynamic-muscle models were stronger. Comparative results with a human model imply that similar muscle group activations between species are needed to sustain single-limb support at maximally applied GRFs in terms of the simplified static simulations (e.g., same walking pose) used here. This approach demonstrated the range of outputs that can be generated for a model of an extinct individual. Despite mostly comparable outputs, the models diverged mostly in terms of strength.

Patterns of energy allocation during energetic scarcity; evolutionary insights from ultra-endurance events

Exercise physiologists and evolutionary biologists share a research interest in determining patterns of energy allocation during times of acute or chronic energetic scarcity.. Within sport and exercise science, this information has important implications for athlete health and performance. For evolutionary biologists, this would shed new light on our adaptive capabilities as a phenotypically plastic species. In recent years, evolutionary biologists have begun recruiting athletes as study participants and using contemporary sports as a model for studying evolution. This approach, known as human athletic palaeobiology, has identified ultra-endurance events as a valuable experimental model to investigate patterns of energy allocation during conditions of elevated energy demand, which are generally accompanied by an energy deficit. This energetic stress provokes detectable functional trade-offs in energy allocation between physiological processes. Early results from this modelsuggest thatlimited resources are preferentially allocated to processes which could be considered to confer the greatest immediate survival advantage (including immune and cognitive function). This aligns with evolutionary perspectives regarding energetic trade-offs during periods of acute and chronic energetic scarcity. Here, we discuss energy allocation patterns during periods of energetic stress as an area of shared interest between exercise physiology and evolutionary biology. We propose that, by addressing the ultimate "why" questions, namely why certain traits were selected for during the human evolutionary journey, an evolutionary perspective can complement the exercise physiology literature and provide a deeper insight of the reasons underpinning the body's physiological response to conditions of energetic stress.

Variability and the form-function framework in evolutionary biomechanics and human locomotion

The form-function conceptual framework, which assumes a strong relationship between the structure of a particular trait and its function, has been crucial for understanding morphological variation and locomotion among extant and fossil species across many disciplines. In biological anthropology, it is the lens through which many important questions and hypotheses have been tackled with respect to relationships between morphology and locomotor kinematics, energetics and performance. However, it is becoming increasingly evident that the morphologies of fossil hominins, apes and humans can confer considerable locomotor diversity and flexibility, and can do so with a range of kinematics depending on soft tissue plasticity and environmental and cultural factors. This complexity is not built into traditional biomechanical or mathematical models of relationships between structure and kinematics or energetics, limiting our interpretation of what bone structure is telling us about behaviour in the past. The nine papers presented in this Special Collection together address some of the challenges that variation in the relationship between form and function pose in evolutionary biomechanics, to better characterise the complexity linking structure and function and to provide tools through which we may begin to incorporate some of this complexity into our functional interpretations.

Bone density and frame size in adult women: Effects of body size, habitual use, and life history

OBJECTIVE

Bone mineral density (BMD) and frame size are important predictors of future bone health, with smaller frame size and lower BMD associated with higher risk of later fragility fractures. We test the effects of body size, habitual use, and life history on frame size and cortical BMD of the radius and tibia in sample of healthy adult premenopausal women.

METHODS

We used anthropometry and life history data from 123 women (age 18-46) from rural Poland. Standard techniques were used to measure height, weight, and body fat. Life history factors were recorded using surveys. Grip strength was measured as a proxy for habitual activity, wrist breadth for skeletal frame size. Cortical BMD was measured at the one-third distal point of the radius and mid-point of the tibia using quantitative ultrasound (reported as speed of sound, SoS).

RESULTS

Radial SoS was high (mean t-score 3.2 ± 1.6), but tibia SoS was average (mean t-score 0.35 ± 1.17). SoS was not associated with age, although wrist breadth was positively associated with age after adjusting for height. Radius SoS was not associated with measures of body size, habitual use, or life history factors. Wrist breadth was associated with body size (p < .05 for all), lean mass, and grip strength. Tibia SoS was associated with height. Life history factors were not associated with frame size or cortical SoS.

CONCLUSIONS

Habitual use and overall body size are more strongly associated with frame size and cortical SoS than life history factors in this sample of healthy adult women.

Muscle force interacts with stature to influence functionally related polar second moments of area in the lower limb among adult women

Objectives

We sought to determine the relationships between muscle size, function, and polar second moments of area (J) at the midshaft femur, proximal tibia, and midshaft tibia.

Materials and Methods

We used peripheral quantitative computed tomography to quantify right femoral and tibial J and soft tissue cross‐sectional areas, and force plate mechanography to quantify peak power output and maximum force of the right limb, among athletic women and control subjects.

Results

Lower limb bone J exhibited strong relationships with estimated force but not power between both groups. Among controls, the strongest relationships between force and J were found at the midshaft femur. Among athletes, these relationships shifted to the tibia, regardless of body size, likely reflecting functional strain related to the major knee extensors and ankle plantarflexors. Together, muscle force and stature explained as much as 82 and 48% of the variance in lower limb bone J among controls and athletes, respectively.

Discussion

Results highlight the importance of considering relevant muscle function variables (e.g., force and lever arm lengths) when interpreting behavioral signatures from skeletal remains. Future work to improve the estimation of muscle force from skeletal remains, and incorporate it with lever arm length into analyses, is warranted. Results also suggest that, in doing so, functional relationships between a given section location and musculature should be considered.

Human athletic paleobiology; using sport as a model to investigate human evolutionary adaptation

The use of sport as a conceptual framework offers unprecedented opportunities to improve our understanding of what the body does, shedding new light on our evolutionary trajectory, our capacity for adaptation, and the underlying biological mechanisms. This approach has gained traction over recent years. To date, sport has facilitated exploration not only of the evolutionary history of our species as a whole, but also of human variation and adaptation at the interindividual and intraindividual levels. At the species level, analysis of lower and upper limb biomechanics and energetics with respect to walking, running and throwing have led to significant advances in the understanding of human adaptations relative to other hominins. From an interindividual perspective, investigation of physical activity patterns and endurance running performance is affording greater understanding of evolved constraints of energy expenditure, thermoregulatory energetics, signaling theory, and morphological variation. Furthermore, ultra-endurance challenges provoke functional trade-offs, allowing new ground to be broken in the study of life history trade-offs and human adaptability. Human athletic paleobiology-the recruitment of athletes as study participants and the use of contemporary sports as a model for studying evolutionary theory-has great potential. Here, we draw from examples in the literature to provide a review of how the use of athletes as a model system is enhancing understanding of human evolutionary adaptation.

Do bone geometric properties of the proximal femoral diaphysis reflect loading history, muscle properties, or body dimensions?

OBJECTIVES

The aim of this study was to investigate activity-induced effects from bone geometric properties of the proximal femur in athletic vs nonathletic healthy females by statistically controlling for variation in body size, lower limb isometric, and dynamic muscle strength, and cross-sectional area of Musculus gluteus maximus.

METHODS

The material consists of hip and proximal thigh magnetic resonance images of Finnish female athletes (N = 91) engaged in either high jump, triple jump, soccer, squash, powerlifting, endurance running or swimming, and a group of physically active nonathletic women (N = 20). Cross-sectional bone geometric properties were calculated for the lesser trochanter, sub-trochanter, and mid-shaft of the femur regions. Bone geometric properties were analyzed using a general linear model that included body size, muscle size, and muscle strength as covariates.

RESULTS

Body size and isometric muscle strength were positively associated with bone geometric properties at all three cross-sectional levels of the femur, while muscle size was positively associated with bone properties only at the femur mid-shaft. When athletes were compared to nonathletic females, triple jump, soccer, and squash resulted in greater values in all studied cross-sections; high jump and endurance running resulted in greater values at the femoral mid-shaft cross-section; and swimming resulted in lower values at sub-trochanter and femur mid-shaft cross-sections.

CONCLUSIONS

Activity effects from ground impact loading were associated with higher bone geometric values, especially at the femur mid-shaft, but also at lesser and sub-trochanter cross-sections. Bone geometric properties along the femur can be used to assess the mechanical stimuli experienced, where ground impact loading seems to be more important than muscle loading.

Relationship between body mass, lean mass, fat mass, and limb bone cross-sectional geometry: Implications for estimating body mass and physique from the skeleton

OBJECTIVES

Estimating body mass from skeletal dimensions is widely practiced, but methods for estimating its components (lean and fat mass) are poorly developed. The ability to estimate these characteristics would offer new insights into the evolution of body composition and its variation relative to past and present health. This study investigates the potential of long bone cross-sectional properties as predictors of body, lean, and fat mass.

MATERIALS AND METHODS

Humerus, femur and tibia midshaft cross-sectional properties were measured by peripheral quantitative computed tomography in sample of young adult women (n = 105) characterized by a range of activity levels. Body composition was estimated from bioimpedance analysis.

RESULTS

Lean mass correlated most strongly with both upper and lower limb bone properties (r values up to 0.74), while fat mass showed weak correlations (r ≤ 0.29). Estimation equations generated from tibial midshaft properties indicated that lean mass could be estimated relatively reliably, with some improvement using logged data and including bone length in the models (minimum standard error of estimate = 8.9%). Body mass prediction was less reliable and fat mass only poorly predicted (standard errors of estimate ≥11.9% and >33%, respectively).

DISCUSSION

Lean mass can be predicted more reliably than body mass from limb bone cross-sectional properties. The results highlight the potential for studying evolutionary trends in lean mass from skeletal remains, and have implications for understanding the relationship between bone morphology and body mass or composition.

The cross-sectional area of the gluteus maximus muscle varies according to habitual exercise loading: Implications for activity-related and evolutionary studies

Greater size of the gluteus maximus muscle in humans compared to non-human primates has been considered an indication of its function in bipedal posture and gait, especially running capabilities. Our aim was to find out how the size of the gluteus maximus muscle varies according to sports while controlling for variation in muscle strength and body weight. Data on gluteus maximus muscle cross-sectional area (MCA) were acquired from magnetic resonance images of the hip region of female athletes (N=91), and physically active controls (N=20). Dynamic muscle force was measured as counter movement jump and isometric knee extension force as leg press. Five exercise loading groups were created: high impact (triple-jumpers and high-jumpers), odd impact (soccer and squash players), high magnitude (power-lifters), repetitive impact (endurance runners) and repetitive non-impact (swimmers) loadings. Individuals in high impact, odd impact or high-magnitude loading groups had greater MCA compared to those of controls, requiring powerful hip extension, trunk stabilization in rapid directional change and high explosive muscle force. Larger body size and greater muscle strength were associated with larger MCA. An increase in dynamic force was associated with larger MCA, but the strength of this relationship varied with body weight. Thus, gluteal adaptation in humans promotes powerful lower limb movements required in sprinting and rapid changes in direction, as well as maintenance and stabilization of an erect trunk which also provides a platform for powerful motions of the upper limbs. These movements have likely evolved to facilitate food acquisition, including hunting.

Muscle area estimation from cortical bone

This article investigates the relationship between the cortical bone of the radius and the muscle area of the forearm. The aim of this study was to develop a method for muscle area estimation from cortical bone area at 65% of radius length where the muscle area at the forearm is largest. Muscle area and cortical area were measured directly in vivo by peripheral Quantitative Computed Tomography (pQCT). We found significant correlations between muscle area and cortical area (r = 0.881) in the forearm that are in line with previous studies. We have set up a regression model by testing relevant parameters such as age, sex, forearm length, and stature that were all highly correlated to muscle area. The influence of age and sex on the proportion of muscle area to cortical area is strong and potentially related to the effects of testosterone and estrogen on the muscle-bone-unit. Muscle area estimation from cortical bone is possible with a Percent Standard Error of Estimate (%SEE) ranging from 12.03% to 14.83%, depending on the parameters available and the age and sex of the individual. Muscle area estimation from cortical bone can provide new information for the study of skeletal and/or fossil human remains.

Histological evidence for muscle insertion in extant amniote femora: implications for muscle reconstruction in fossils

Since the 19th century, identification of muscle attachment sites on bones has been important for muscle reconstructions, especially in fossil tetrapods, and therefore has been the subject of numerous biological and paleontological studies. At the microscopic level, in histological thin sections, the only features that can be used reliably for identifying tendon-bone or muscle-tendon-bone interactions are Sharpey's fibers. Muscles, however, do not only attach to the bone indirectly with tendons, but also directly. Previous studies failed to provide new indicators for muscle attachment, or to address the question of whether muscles with direct attachment can be identified histologically. However, histological identification of direct muscle attachments is important because these attachments do not leave visible marks (e.g. scars and rugosities) on the bone surface. We dissected the right hind limb and mapped the muscle attachment sites on the femur of one rabbit (Oryctolagus cuniculus), one Alligator mississippiensis, and one turkey (Meleagris cuniculus). We then extracted the femur and prepared four histological thin sections for the rabbit and the turkey and five histological thin sections for the alligator. Sharpey's fibers, vascular canal orientation, and a frayed periosteal margin can be indicators for indirect but also direct muscle attachment. Sharpey's fibers can be oriented to the cutting plane of the thin section at high angles, and two Sharpey's fibers orientations can occur in one area, possibly indicating a secondary force axis. However, only about 60% of mapped muscle attachment sites could be detected in thin sections, and frequently histological features suggestive of muscle attachment occurred outside mapped sites. While these insights should improve our ability to successfully identify and reconstruct muscles in extinct species, they also show the limitations of this approach.

Cross sectional properties of the human radial tuberosity

This study examines the cross sectional shape and biomechanical properties of the radial bone shaft at mid-radial tuberosity (RT) musculoskeletal marker (MSM). This information will provide insight into factors affecting bone modelling at muscle insertions. Radial shaft cross-sectional properties at radial tuberosity area (RTA) have not been previously studied. The material consists of 54 male skeletons derived from autopsies performed during the 1920s and 1930s and housed at the Central Natural History Museum, University of Helsinki. The age, sex and occupation of these individuals are known. We applied a pQCT (peripheral quantitative computed tomography) scan on the mid-site of the radial tuberosity to investigate the cross-sectional shape, the bone mineral density (BMD) and biomechanical properties. Our results indicate that bone modelling does not produce increased wall thickness or BMD at the RT site. Additionally we noticed that aging and physical activity affect the biomechanics of the RT and that the bone distribution at mid-RT is adapted to accommodate the biceps brachii muscle pull. We also found a clear association between RTA and biomechanical properties of mid-RT cross section.