How do we assess hospital cleaning? A proposal for microbiological standards for surface hygiene in hospitals

Clinical study of antibacterial medical textiles containing polyhydroxyalkanoate oligomers for reduction of hospital-acquired infections

INTRODUCTION

The prevention and control of hospital-acquired infections remain a significant challenge worldwide, as textiles used in hospital wards are highly involved in transmission processes. This paper reports a new antibacterial medical fabric used to prepare hospital pillowcases, bottom sheets and quilt covers for controlling and reducing hospital-acquired infections.

METHOD

The medical fabric was composed of blended yarns of staple polyester (PET) and degradable poly(3-hydroxybutyrate co-3-hydroxyvalerate) (PHBV)/polylactic acid (PLA) fibres, which were coated with polylactide oligomers (PLAO), which are environmentally friendly and safe antimicrobial agents with excellent thermal stability in high-temperature laundry. A clinical trial was conducted, with emphasis on the bacterial species that were closely related to the infection cases in the study hospital.

RESULT

After 7 days of use, 94% of PET/PHBV/PLA-PLAO fabric retained <20 colony-forming units/100 cm2 of the total bacterial amount, meeting hygiene and cleanliness standards.

CONCLUSION

This study demonstrates the potential of fabrics containing polyhydroxyalkanoate oligomers as highly effective, safe and long-lasting antimicrobial medical textiles that can effectively reduce the incidence of hospital-acquired infections.

Trends in viable microbial bioburden on surfaces within a paediatric bone marrow transplant unit

BACKGROUND

Despite their role being historically overlooked, environmental surfaces have been shown to play a key role in the transmission of pathogens causative of healthcare-associated infection. To guide infection prevention and control (IPC) interventions and inform clinical risk assessments, more needs to be known about microbial surface bioburdens.

AIM

To identify the trends in culturable bacterial contamination across communal touch sites over time in a hospital setting.

METHODS

Swab samples were collected over nine weeks from 22 communal touch sites in a paediatric bone marrow transplant unit. Samples were cultured on Columbia blood agar and aerobic colony counts (ACC) per 100 cm2 were established for each site. Individual colony morphologies were grouped and identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry or 16s rDNA sequencing.

FINDINGS

Highest mean counts were observed for sites associated with ward management activity and computer devices (3.29 and 2.97 ACC/100 cm2 respectively). A nurses' station keyboard had high mean ACC/100 cm2 counts (10.67) and diversity, while laundry controls had high mean ACC/100 cm2 counts (4.70) and low diversity. Micrococcus luteus was identified in all sampling groups. Clinical staff usage sites were contaminated with similar proportions of skin and environmental flora (52.19-46.59% respectively), but sites associated with parental activities were predominantly contaminated by environmental microflora (86.53%).

CONCLUSION

The trends observed suggest patterns in microbial loading based on site activities, surface types and user groups. Improved understanding of environmental surface contamination could help support results interpretation and IPC interventions, improving patient safety.

Assessing the impact of a cleaning programme on environmental hygiene in labour and neonatal wards: an exploratory study in The Gambia

BACKGROUND

Effective surface cleaning in hospitals is crucial to prevent the transmission of pathogens. However, hospitals in low- and middle-income countries face cleaning challenges due to limited resources and inadequate training.

METHODS

We assessed the effectiveness of a modified TEACH CLEAN programme for trainers in reducing surface microbiological contamination in the newborn unit of a tertiary referral hospital in The Gambia. We utilised a quasi-experimental design and compared data against those from the labour ward. Direct observations of cleaning practices and key informant interviews were also conducted to clarify the programme's impact.

RESULTS

Between July and September 2021 (pre-intervention) and October and December 2021 (post-intervention), weekly surface sampling was performed in the newborn unit and labour ward. The training package was delivered in October 2021, after which their surface microbiological contamination deteriorated in both clinical settings. While some cleaning standards improved, critical aspects such as using fresh cleaning cloths and the one-swipe method did not. Interviews with senior departmental and hospital management staff revealed ongoing challenges in the health system that hindered the ability to improve cleaning practices, including COVID-19, understaffing, disruptions to water supply and shortages of cleaning materials.

CONCLUSIONS

Keeping a hospital clean is fundamental to good care, but training hospital cleaning staff in this low-income country neonatal unit failed to reduce surface contamination levels. Further qualitative investigation revealed multiple external factors that challenged any possible impact of the cleaning programme. Further work is needed to address barriers to hospital cleaning in low-income hospitals.

Visible-light photoactivated proanthocyanidin and kappa-carrageenan coating with anti-adhesive properties against clinically relevant bacteria

The increase of bacterial resistance to antibiotics is a growing concern worldwide and the search for new therapies could cost billions of dollars and countless lives. Inert surfaces are major sources of contamination due to easier adhesion and formation of bacterial biofilms, hindering the disinfection process. Therefore, the objective of this study was to develop a photoactivatable and anti-adhesive kappa-carrageenan coating using proanthocyanidin as a photosensitizer. The complete reduction (>5-log10 CFU/cm3) of culturable cells of Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa pathogens was achieved after 30 min of exposure to visible light (420 nm; 30 mW/cm2) with 5 % (w/v) of the photosensitizer. Cell membrane damage was confirmed by measuring potassium leakage, epifluorescence microscopy and bacterial motility analysis. Overall, visible light irradiation on coated solid surfaces mediated by proanthocyanidin showed no cytotoxicity and inactivated clinically important pathogens through the generation of reactive oxygen species, inhibiting bacterial initial adhesion. The developed coating is a promising alternative for a wide range of applications related to surface disinfection and food biopreservation.

Dynamics of blaOXA-23 gene transmission in Acinetobacter spp. from contaminated veterinary environmental surfaces: an emerging One Health threat?

BACKGROUND

Carbapenem-resistant Acinetobacter baumannii is a common pathogen associated with healthcare-acquired infections, and robust infection prevention and control protocols exist in human healthcare settings. In contrast, infection prevention and control (IPC) standards are limited in veterinary medicine, necessitating further investigation.

AIM

Examine the possible transmission of carbapenem-resistant Acinetobacter spp. in a veterinary practice where a cat was diagnosed with an OXA-23-producing A. baumannii ST2 strain.

METHODS

Environmental samples together with nasal and hand swabs from the veterinary personnel were collected. All swabs were screened for the presence of extended-spectrum-β-lactamase- and carbapenemase-producing Enterobacterales, meticillin-resistant staphylococcus and multi-drug-resistant Acinetobacter spp. Whole-genome sequencing was performed for carbapenemase-producing strains.

RESULTS

Of the veterinary staff, 60% carried meticillin-resistant Staphylococcus epidermidis. Environmental evaluation showed that 40% (N=6/15) of the surfaces analysed by contact plates and 40% (N=8/20) by swabs failed the hygiene criteria. Assessment of the surfaces revealed contamination with five OXA-23-producing Acinetobacter spp. strains: an OXA-23-producing Acinetobacter schindleri on the weight scale in the waiting room; and four OXA-23-producing Acinetobacter lwoffii strains, on different surfaces of the treatment room. The blaOXA-23 gene was located on the same plasmid-carrying Tn2008 across the different Acinetobacter spp. strains. These plasmids closely resemble a previously described OXA-23-encoding plasmid from a human Portuguese nosocomial Acinetobacter pittii isolate. Distinctly, the OXA-23-producing A. baumannii ST2 clinical strain had the resistant gene located on Tn2006, possibly inserted on the chromosome.

CONCLUSION

The detection of an OXA-23-producing A. baumannii ST2 veterinary clinical strain is of concern for companion animal health and infection, prevention and control. This study established the dynamic of transmission of the plasmid-mediated blaOXA-23 gene on critical surfaces of a small animal veterinary practice. The genetic resemblance to a plasmid found in human nosocomial settings suggests a potential One Health link.

Applicability of the ATP assay in monitoring the cleanliness of hospital environments

BACKGROUND

The adenosine triphosphate (ATP) assay is widely used for simple and rapid evaluation of the cleanliness of environmental surfaces. However, there remain concerns regarding the reliability of the ATP assay in hospital settings. This study aimed to assess whether the ATP assay could detect inadequate cleaning within hospital environments as well as monitor the effectiveness of routine cleaning.

METHODS

The cleanliness of seven types of high-touch surfaces in operating rooms that were routinely cleaned was evaluated by testing the ATP assay and aerobic colony counts (ACC). For pressure redistribution mattresses (Soft-nurse®) that were found to be particularly at risk of infection, cleaning methods were improved, and the effectiveness of these improvements was monitored using the same two methods.

RESULTS

The ATP assay quantitatively detected contamination on seven high-touch surfaces but showed no correlation with ACC. However, a significant positive correlation between luminescence and ACC was found on one specific surface, allowing for determining a theoretical cutoff value. Additionally, the ATP assay effectively identified the risk of future infection, which the ACC test could not assess.

CONCLUSIONS

The ATP assay can monitor the effectiveness of routine cleaning by setting a theoretical cutoff value for each subject. The method provides quantitative and meaningful values when used with an understanding of its limitations.

Radiology Department: A Potential Source of Multidrug-Resistant Microorganisms: A Cross-Sectional Study at Tertiary Hospital, Palestine

Introduction

Globally, healthcare facilities face a great challenge in the form of hospital-acquired infections (HAIs). Aside from the morbidity and mortality they cause, these illnesses are also extremely costly. Research on infection transmission in the medical field has been considerable, but not so much in the radiology department.

Aim

This study aims to identify the presence of multidrug-resistant (MDR) microbes on surfaces that are frequently touched in computed tomography (CT), magnetic resonance imaging (MRI), ultrasound (US), plain X-ray examination rooms, and portable radiography that are susceptible to contamination as well as to investigate the potential dangers of contracting MDR organisms to patients and healthcare providers. Materials and Method. In this study, 160 swab samples were collected from the radiology department during May and June 2022. Samples were obtained from 80 predefined surfaces twice within and outside of CT and MRI examination rooms as well as from US and plain X-ray machines and portable X-ray machines. Samples were taken at 7:00 a.m. using cotton swabs following the regular cleaning procedure. Bacterial colony-forming units (CFUs) per square centimeter were calculated after swabbing a 100 cm2 surface.

Results

Nearly all of the surfaces tested had bacterial CFUs. The highest contamination rate was found on keyboards ranging from (1.2-8) CFU/cm2, the sides of patient tables (1.2-20) CFU/cm2, knee coil (2.4-3) CFU/cm2, and patient leg supports (1.2-8) CFU/cm2. A noticeable increase in the contamination was noticed in June compared to May, and this was consistent with the increase in the number of isolated patients in the hospital, the workload in the radiology department, and the number of patients referred to the hospital. In our study, none of the examined sites showed contamination with MDR Gram-negative bacteria such as extended-spectrum beta-lactamases producing Enterobacterales (ESPL) or Carbapenemase-producing Enterobacterales (CPE). On the other hand, methicillin-resistant Staphylococcus (MRS), vancomycin-resistant Staphylococcus (VRS), and vancomycin-resistant Enterococcus (VRE) were detected.

Conclusion

All of the radiology department equipment and sites could be a source of bacterial infection including MDR, so the obligatory and committed disinfection protocol must be revised and implemented in the morning and between patients.

Isolation of virulent phages against multidrug-resistant Acinetobacter baumannii recovered from inanimate objects of Jimma Medical Center, Southwest Ethiopia

BACKGROUND

Because of the multidrug resistance features of Acinetobacter baumannii, endurance to diverse conditions, and causing health fatalities in healthcare settings, the global health system is looking for the development of new antimicrobials for such bacteria. As the new antimicrobial drugs pipeline is running dry, it is imperative to look for eco-friendly bio-control strategies. In this regard, phages are one to combat the biofilm producer and MDR A. baumannii. Thus, the study aimed to isolate and examine the role of phages against biofilm producers and MDR A. baumannii from inanimate objects at Jimma Medical Center (JMC), Ethiopia.

METHOD

Institution-based cross-sectional study was conducted from June to November 2019. A total of 309 swab samples were collected from inanimate objects and the environment in JMC. Isolation of A. baumannii, antimicrobial susceptibility testing, and biofilm detection were carried out according to standard protocol. Kirby Bauer disk diffusion and microliter plate were methods for AST and biofilm detection, respectively. Specific phage was isolated and characterized from sewage at JMC compound. The data were analyzed by SPSS version 25.0, and chi-square (X2) cross-tabulation was used to determine the correlation of variables. A P-value of < 0.05 was considered a statistically significant association.

RESULT

A. baumannii from inanimate objects and surfaces of different environments at JMC was detected in 6.5% of the samples. From 20 of the isolates, 85% were biofilm producers, and 60% were MDR. The lytic phage isolated specifically against A. baumannii was found host specific, and thermally stable ranging from 10-50°C. The phage was active against 42% of MDR A. baumannii, 40% of both biofilm-producing and MDR A. baumannii (MDRAB), and 35.3% of the biofilm-producing isolates.

CONCLUSION

The good activity of phages towards MDRAB isolates, its biofilm degradation capability, thermal stability, and host specificity in our study encourages viewing the potential use of phages as a bio-control agent besides the routine cleansing agents. Therefore, we recommend isolation of specific phages in the eradication of MDRAB from health facilities with additional efforts to characterize in detail and assess their efficacy in animal models.

Non-touch treatment to solve the persistent contamination of culture plates with Aspergillus niger in a clinical microbiology laboratory of Spain

A pseudo-outbreak of Aspergillus caused by false positive cultures can have a high sanitary impact. We determined the effectiveness (fungal load elimination) of a non-touch disinfection system, vs conventional disinfection methods, to solve steady contamination of culture plates with Aspergillus niger at a clinical microbiology laboratory. Routine cleaning-disinfection (RCD), intensive cleaning-disinfection (ICD), and terminal airborne disinfection (TAD) were employed in stages. Air sampling was carried out before and after each procedure. The effectiveness of TAD on contact surfaces was tested by surface sampling. After RCD, ICD, and TAD, there was a mean decrease of 5.4 (95% CI = 1.8-9.0), 19.2 (95% CI = 12.4-26.0), and 4.4 (95% CI = 2.5-6.3) CFU per tested area, and 46.2%, 21.7%, and 95.5% of contaminated areas became sterile, respectively. There was a mean decrease of 30.6 CFU per tested surface (p < 0.0007) and 50% of tested surfaces became sterile. Global effectiveness of RCD, ICD, and TAD was 68.8% (95% CI = 68.5-69.1), 82.2% (95% CI = 82.1-82.3), and 99.0% (95% CI = 98.8-99.2), respectively. The effectiveness was higher with TAD (4.1 CFU/cm2 less than with ICD; p = 0.0290). No further contamination has occurred since then. When construction and renovation activities are discarded and RCD and ICD practices are insufficient, non-touch disinfection remove residual dust contamination and avoid recurrence.

Environmental approaches to controlling Clostridioides difficile infection in healthcare settings

As today's most prevalent and costly healthcare-associated infection, hospital-onset Clostridioides difficile infection (HO-CDI) represents a major threat to patient safety world-wide. This review will discuss how new insights into the epidemiology of CDI have quantified the prevalence of C. difficile (CD) spore contamination of the patient-zone as well as the role of asymptomatically colonized patients who unavoidable contaminate their near and distant environments with resilient spores. Clarification of the epidemiology of CD in parallel with the development of a new generation of sporicidal agents which can be used on a daily basis without damaging surfaces, equipment, or the environment, led to the research discussed in this review. These advances underscore the potential for significantly mitigating HO-CDI when combined with ongoing programs for optimizing the thoroughness of cleaning as well as disinfection. The consequence of this paradigm-shift in environmental hygiene practice, particularly when combined with advances in hand hygiene practice, has the potential for significantly improving patient safety in hospitals globally by mitigating the acquisition of CD spores and, quite plausibly, other environmentally transmitted healthcare-associated pathogens.

Hospital cleaning: past, present, and future

INTRODUCTION

The importance of hospital cleaning for controlling healthcare-associated infection (HAI) has taken years to acknowledge. This is mainly because the removal of dirt is inextricably entwined with gender and social status, along with lack of evidence and confusion over HAI definitions. Reducing so-called endogenous infection due to human carriage entails patient screening, decolonisation and/or prophylaxis, whereas adequate ventilation, plumbing and cleaning are needed to reduce exogenous infection. These infection types remain difficult to separate and quantitate. Patients themselves demonstrate wide-ranging vulnerability to infection, which further complicates attempted ranking of control interventions, including cleaning. There has been disproportionate attention towards endogenous infection with less interest in managing environmental reservoirs.

QUANTIFYING CLEANING AND CLEANLINESS

Finding evidence for cleaning is compromised by the fact that modelling HAI rates against arbitrary measurements of cleaning/cleanliness requires universal standards and these are not yet established. Furthermore, the distinction between cleaning (soil removal) and cleanliness (soil remaining) is usually overlooked. Tangible bench marking for both cleaning methods and all surface types within different units, with modification according to patient status, would be invaluable for domestic planning, monitoring and specification.

AIMS AND OBJECTIVES

This narrative review will focus on recent history and current status of cleaning in hospitals. While its importance is now generally accepted, cleaning practices still need attention in order to determine how, when and where to clean. Renewed interest in removal and monitoring of surface bioburden would help to embed risk-based practice in hospitals across the world.

Potential sources of contamination on textiles and hard surfaces identified as high-touch sites near the patient environment

The hospital environment represents an important mediator for the transmission of healthcare-associated infections through direct and indirect hand contact with hard surfaces and textiles. In this study, bacteria on high-touch sites, including textiles and hard surfaces in two care wards in Sweden, were identified using microbiological culture methods and 16S rDNA sequencing. During a cross-sectional study, 176 high-touch hard surfaces and textiles were identified and further analysed using microbiological culture for quantification of total aerobic bacteria, Staphylococcus aureus, Clostridium difficile and Enterobacteriacae. The bacterial population structures were further analysed in 26 samples using 16S rDNA sequencing. The study showed a higher frequency of unique direct hand-textile contacts (36 per hour), compared to hard surfaces (2.2 per hour). Hard surfaces met the recommended standard of ≤ 5 CFU/cm2 for aerobic bacteria and ≤ 1 CFU/cm2 for S. aureus (53% and 35%, respectively) to a higher extent compared to textiles (19% and 30%, respectively) (P = 0.0488). The number of bacterial genera was higher on textiles than on the hard surfaces. Staphylococcus (30.4%) and Corynebacterium (10.9%) were the most representative genera for textiles and Streptococcus (13.3%) for hard surfaces. The fact that a big percentage of the textiles did not fulfil the criteria for cleanliness, combined with the higher bacterial diversity, compared to hard surfaces, are indicators that textiles were bacterial reservoirs and potential risk vectors for bacterial transmission. However, since most of the bacteria found in the study belonged to the normal flora, it was not possible to draw conclusions of textiles and hard surfaces as sources of healthcare associated infections.

Long-read sequencing reveals genomic diversity and associated plasmid movement of carbapenemase-producing bacteria in a UK hospital over 6 years

Healthcare-associated infections (HCAIs) affect the most vulnerable people in society and are increasingly difficult to treat in the face of mounting antimicrobial resistance (AMR). Routine surveillance represents an effective way of understanding the circulation and burden of bacterial resistance and transmission in hospital settings. Here, we used whole-genome sequencing (WGS) to retrospectively analyse carbapenemase-producing Gram-negative bacteria from a single hospital in the UK over 6 years (n=165). We found that the vast majority of isolates were either hospital-onset (HAI) or HCAI. Most carbapenemase-producing organisms were carriage isolates, with 71 % isolated from screening (rectal) swabs. Using WGS, we identified 15 species, the most common being Escherichia coli and Klebsiella pneumoniae. Only one significant clonal outbreak occurred during the study period and involved a sequence type (ST)78 K. pneumoniae carrying bla NDM-1 on an IncFIB/IncHI1B plasmid. Contextualization with public data revealed little evidence of this ST outside of the study hospital, warranting ongoing surveillance. Carbapenemase genes were found on plasmids in 86 % of isolates, the most common types being bla NDM- and bla OXA-type alleles. Using long-read sequencing, we determined that approximately 30 % of isolates with carbapenemase genes on plasmids had acquired them via horizontal transmission. Overall, a national framework to collate more contextual genomic data, particularly for plasmids and resistant bacteria in the community, is needed to better understand how carbapenemase genes are transmitted in the UK.

Bacterial Contamination of Healthcare Students' Mobile Phones: Impact of Specific Absorption Rate (SAR), Users' Demographics and Device Characteristics on Bacterial Load

We quantitatively and qualitatively evaluated the bacterial contamination of mobile phones (MPs) in relation to users' demographics, habits, and device characteristics by administering questionnaires to 83 healthcare university students and sampling their MPs by following a cross-sectional design. The heterotrophic plate count (HPC) at 22 °C (HPC 22 °C) and 37 °C (HPC 37 °C), Enterococci, Gram-negative bacteria, and Staphylococci were evaluated. Higher bacterial loads were detected for HPC 37 °C and Staphylococci (416 and 442 CFU/dm², respectively), followed by HPC 22 °C, Enterococci, and Gram-negative bacteria; the vast majority of samples were positive for HPC 37 °C, HPC 22 °C, and Staphylococci (98%), while Enterococci (66%) and Gram-negative bacteria (17%) were detected less frequently. A statistically significant positive correlation (r = 0.262, p < 0.02) was found between the European head specific absorption rate (SAR) and both HPC 37 °C and Staphylococci; Enterococci showed a strong, significant correlation with HPC 37 °C, HPC 22 °C, and Gram-negative bacteria (r = 0.633, 0.684, 0.884) and a moderate significant correlation with Staphylococci (r = 0.390). Significant differences were found between HPC 22 °C and the type of internship attendance, with higher loads for Medicine. Students with a daily internship attendance had higher HPC 22 °C levels than those attending <6 days/week. Our study showed that bacteria can survive on surfaces for long periods, depending on the user's habits and the device's characteristics.

The effect of decontamination using quaternary ammonium chloride on the bacterial burden of hospital privacy curtains

This quasi-experimental study aimed to identify the effect of decontamination using quaternary ammonium chloride (QAC) on bacterial burden on hospital privacy curtains. The objects were the high-touch edges of 66 polyester curtains in inpatient wards. The decontamination was performed daily (n = 22), twice-weekly (n = 22), or not performed (n = 22) for 28 days. The bacterial burden on the curtains was measured based on the number of bacteria, the proportion of curtains with >2.5 colony-forming unit/cm² , and the proportion of curtains with multidrug-resistant organisms (MDROs). As a result, the daily or twice-weekly decontamination groups showed a significantly lower increase in bacterial burden than the no-decontamination group overall and at all four posttest times. On day 28, daily decontamination showed a lower increase in the number of bacteria (p < 0.001) and proportions of curtains with >2.5 colony form units/cm² (p < 0.001) than the no-decontamination condition, and in the number of curtains with MDROs than twice-weekly decontamination. In conclusion, decontamination of curtains using QAC helps reduce bacterial burden, and daily decontamination is recommended up to 28 days after installation.

Nanosilver/DCOIT-containing surface coating effectively and constantly reduces microbial load in emergency room surfaces

BACKGROUND

Colonization of near-patient surfaces in hospitals plays an important role as a source of healthcare-associated infections. Routine disinfection methods only result in short-term elimination of pathogens.

AIM

To investigate the efficiency of a newly developed antimicrobial coating containing nanosilver in long-term reduction of bacterial burden in hospital surfaces to close the gap between routine disinfection cycles.

METHODS

In this prospective, double-blinded trial, frequently touched surfaces of a routinely used treatment room in an emergency unit of a level-I hospital were treated with a surface coating (nanosilver/DCOIT-coated surface, NCS) containing nanosilver particles and another organic biocidal agent (4,5-dichloro-2-octyl-4-isothiazolin-3-one, DCOIT), whereas surfaces of another room were treated with a coating missing both the nanosilver- and DCOIT-containing ingredient and served as control. Bacterial contamination of the surfaces was examined using contact plates and liquid-based swabs daily for a total trial duration of 90 days. After incubation, total microbial counts and species were assessed.

FINDINGS

In a total of 2880 antimicrobial samples, a significant reduction of the overall bacterial load was observed in the NCS room (median: 0.31 cfu/cm²; interquartile range: 0.00-1.13) compared with the control coated surfaces (0.69 cfu/cm²; 0.06-2.00; P < 0.001). The nanosilver- and DCOIT-containing surface coating reduced the relative risk of a critical bacterial load (defined as >5 cfu/cm²) by 60% (odds ratio 0.38, P < 0.001). No significant difference in species distribution was detected between NCS and control group.

CONCLUSION

Nanosilver-/DCOIT-containing surface coating has shown efficiency for sustainable reduction of bacterial load of frequently touched surfaces in a clinical setting.

Environmental contamination with highly resistant microorganisms after relocating to a new hospital building with 100% single-occupancy rooms: A prospective observational before-and-after study with a three-year follow-up

INTRODUCTION

Inanimate surfaces within hospitals can be a source of transmission for highly resistant microorganisms (HRMO). While many hospitals are transitioning to single-occupancy rooms, the effect of single-occupancy rooms on environmental contamination is still unknown. We aimed to determine differences in environmental contamination with HRMO between an old hospital building with mainly multiple-occupancy rooms and a new hospital building with 100% single-occupancy rooms, and the environmental contamination in the new hospital building during three years after relocating.

METHODS

Environmental samples were taken twice in the old hospital, and fifteen times over a three-year period in the new hospital. Replicate Organism Direct Agar Contact-plates (RODACs) were used to determine colony forming units (CFU). Cotton swabs premoistened with PBS were used to determine presence of methicillin-resistant Staphylococcus aureus, carbapenemase-producing Pseudomonas aeruginosa, highly resistant Enterobacterales, carbapenem-resistant Acinetobacter baumannii, and vancomycin-resistant Enterococcus faecium. All identified isolates were subjected to whole genome sequencing (WGS) using Illumina technology.

RESULTS

In total, 4993 hospital sites were sampled, 724 in the old and 4269 in the new hospital. CFU counts fluctuated during the follow-up period in the new hospital building, with lower CFU counts observed two- and three years after relocating, which was during the COVID-19 pandemic. The CFU counts in the new building were equal to or surpassed the CFU counts in the old hospital building. In the old hospital building, 24 (3.3%) sample sites were positive for 49 HRMO isolates, compared to five (0.1%) sample sites for seven HRMO isolates in the new building (P < 0.001). In the old hospital, 89.8% of HRMO were identified from the sink plug. In the new hospital, 71.4% of HRMO were identified from the shower drain, and no HRMO were found in sinks.

DISCUSSION

Our results indicate that relocating to a new hospital building with 100% single-occupancy rooms significantly decreases HRMO in the environment. Given that environmental contamination is an important source for healthcare associated infections, this finding should be taken into account when considering hospital designs for renovations or the construction of hospitals.

Implementation of an Environmental Cleaning Protocol in Hospital Critical Areas Using a UV-C Disinfection Robot

Improving the cleaning and disinfection of high-touch surfaces is one of the core components of reducing healthcare-associated infections. The effectiveness of an enhanced protocol applying UV-C irradiation for terminal room disinfection between two successive patients was evaluated. Twenty high-touch surfaces in different critical areas were sampled according to ISO 14698-1, both immediately pre- and post-cleaning and disinfection standard operating protocol (SOP) and after UV-C disinfection (160 sampling sites in each condition, 480 in total). Dosimeters were applied at the sites to assess the dose emitted. A total of 64.3% (103/160) of the sampling sites tested after SOP were positive, whereas only 17.5% (28/160) were positive after UV-C. According to the national hygienic standards for health-care setting, 9.3% (15/160) resulted in being non-compliant after SOP and only 1.2% (2/160) were non-compliant after UV-C disinfection. Operation theaters was the setting that resulted in being less compliant with the standard limit (≤15 colony-forming unit/24 cm²) after SOP (12%, 14/120 sampling sites) and where the UV-C treatment showed the highest effectiveness (1.6%, 2/120). The addition of UV-C disinfection to the standard cleaning and disinfection procedure had effective results in reducing hygiene failures.

Surface Hygiene Evaluation Method in Food Trucks as an Important Factor in the Assessment of Microbiological Risks in Mobile Gastronomy

Street food outlets are characterised by poor microbiological quality of the food and poor hygiene practices that pose a risk to consumer health. The aim of the study was to evaluate the hygiene of surfaces in food trucks (FT) using the reference method together with alternatives such as Petrifilm^TM and the bioluminescence method. TVC, S. aureus, Enterobacteriaceae, E. coli, L. monocytogenes, and Salmonella spp. were assessed. The material for the study consisted of swabs and prints taken from five surfaces (refrigeration, knife, cutting board, serving board, and working board) in 20 food trucks in Poland. In 13 food trucks, the visual assessment of hygiene was very good or good, but in 6 FTs, TVC was found to exceed log 3 CFU/100 cm² on various surfaces. The assessment of surface hygiene using various methods in the food trucks did not demonstrate the substitutability of culture methods. Petrifilm^TM tests were shown to be a convenient and reliable tool for the monitoring of mobile catering hygiene. No correlation was found between the subjective visual method and the measurement of adenosine 5-triphosphate. In order to reduce the risk of food infections caused by bacteria in food trucks, it is important to introduce detailed requirements for the hygiene practices used in food trucks, including techniques for monitoring the cleanliness of surfaces coming into contact with food, in particular cutting boards and work surfaces. Efforts should be focused on introducing mandatory, certified training for food truck personnel in the field of microbiological hazards, appropriate methods of hygienisation, and hygiene monitoring.

Identifying and elucidating the resistance of Staphylococcus aureus isolated from hospital environment to conventional disinfectants

BACKGROUND

Staphylococcus aureus is a nosocomial pathogen, detection and elucidation of its resistance mechanisms to conventional disinfectants may aid in limiting its spread on environmental surfaces in health care settings. In the current study, disinfectant susceptibility of S. aureus strains isolated from the hospital environment as well as possible associations between the presence of disinfectant-resistance genes and reduced susceptibility to disinfectants was investigated.

METHODS

A total of 245 samples were collected from the hospital environmental surfaces. The minimum inhibitory (MIC) and bactericidal concentrations (MBC) of disinfectants against S. aureus isolates were determined using the micro-broth dilution method. The qac genes (qacA, qacE, and qacΔE1) were detected by PCR and confirmed by sanger sequencing.

RESULTS

A total of 47 S. aureus strains were isolated, with more than 85% of them showing methicillin resistance. The qacA, qacE, and qac∆E1 genes were found in 23.4%, 29.7%, and 4.2% isolates respectively. All the isolates with qac genes had higher MIC and MBC values to selected disinfectants.

CONCLUSIONS

Significant methicillin resistant S. aureus (MRSA) contamination in the hospital environment was detected. Furthermore, higher qac gene frequencies were found in MRSA isolates that also correlated with higher MIC/MBC values to different disinfectants. The study proposes that hospitals should develop policies to determine disinfectant MICs against the common environmental isolates to contain the spread of resistant strains.

Evaluating the environmental microbiota across four National Health Service hospitals within England

Hospital surfaces contaminated with microbial soiling, such as dry surface biofilms (DSBs), can act as a reservoir for pathogenic micro-organisms, and inhibit their detection and removal during routine cleaning. Studies have recognized that such increases in bioburden can hinder the impact of disinfectants and mask the detection of potential pathogens. Cleanliness within healthcare settings is often determined through routine culture-based analysis, whereby surfaces that exhibit >2.5 colony-forming units (CFU) per cm² pose a risk to patient health; therefore, any underestimation could have detrimental effects. This study quantified microbial growth on high-touch surfaces in four hospitals in England over 19 months. This was achieved using environmental swabs to sample a variety of surfaces within close proximity of the patient, and plating these on to non-specific low nutrient detection agar. The presence of DSBs on surfaces physically removed from the environment was confirmed using real-time imaging through episcopic differential interference contrast microscopy combined with epifluorescence. Approximately two-thirds of surfaces tested exceeded the limit for cleanliness (median 2230 CFU/cm²), whilst 83% of surfaces imaged with BacLight LIVE/DEAD staining confirmed traces of biofilm. Differences in infection control methods, such as choice of surface disinfectants and cleaning personnel, were not reflected in the microbial variation observed and resulting risk to patients. This highlights a potential limitation in the effectiveness of the current standards for all hospital cleaning, and further development using representative clinical data is required to overcome this limitation.

Hospital Reservoirs of Multidrug Resistant Acinetobacter Species-The Elephant in the Room!

Environmental contamination is estimated to contribute to up to 20% of all hospital acquired infections. Acinetobacter baumannii is an example of one the most prevalent opportunistic pathogens causing severe and persistent infections in immunocompromised patients. It has proven ability to form biofilms, has significant associated multi-drug resistance and is able to transfer mobile genetic elements to other clinically relevant pathogens. All of these factors point to a definite utility of A. baumannii as an indicator organism for effectiveness of decontamination regimens as well as environmental screening. There is an increased cost, both financial and clinical, associated with multi drug resistant organisms, carbapenem resistant A. baumannii. With a dearth of new antimicrobials in development, now is the time to radically transform and lead the introduction of scientifically based environmental screening and microbiological verified decontamination to control the dissemination of further resistance.

Environmental bacterial and fungal contamination in high touch surfaces and indoor air of a paediatric intensive care unit in Maputo Central Hospital, Mozambique in 2018

Background

The hospital environment serves as a reservoir of microorganisms which may be associated with healthcare-associated infections (HCAI). The study of environmental contamination with microorganisms is a method for the assessment of hospital environmental hygiene. We sought to evaluate the environmental colonisation of a national reference hospital unit, using the total aerobic colony count (ACC) and the isolated microorganisms, as assessment tools.

Methods

A cross-sectional study was conducted in the Paediatric Intensive Care Unit (PICU) of the Hospital Central de Maputo during a four-week period in 2018. Surfaces and air were sampled before and after room cleaning, using swabs and passive air method. Those samples were processed at the microbiology laboratory where total ACC levels were evaluated, and microorganisms were isolated, identified and assessed for antibiotic susceptibility.

Discussion

Comparison of the total median ACC of the indoor air (287 cfu/m³ before and 195 cfu/m³ after) and surfaces (0.38 cfu/cm² before and 0.33 cfu/cm² after) before and after room cleaning did not show significant differences (P>0.05). Microorganisms of epidemiological importance, including coagulase negative staphylococci (CoNS), Klebsiella pneumoniae and Serratia odorifera were isolated and all of these three were multi-drug resistant (MDR).

Conclusion

The results showed controlled contamination levels on high touch surfaces in the patient environment and a high level of contamination of the indoor air suggesting deficiencies in the PICU environmental decontamination process. There was evidence of the presence of fungi and MDR species of epidemiological importance in the context of HCAI.

The impact of ventilation rate on reducing the microorganisms load in the air and on surfaces in a room-sized chamber

Hospital-acquired infections (HAIs) are a global challenge incurring mortalities and high treatment costs. The environment plays an important role in transmission due to contaminated air and surfaces. This includes microorganisms' deposition from the air onto surfaces. Quantifying the deposition rate of microorganisms enables understanding surface contamination and can inform strategies to mitigate the infection risk. We developed and validated a novel Automated Multiplate Passive Air Sampling (AMPAS) device. This enables sequences of passive deposition samples to be collected over a controlled time period without human intervention. AMPAS was used with air sampling to measure the effect of ventilation rate and spatial location on the deposition rate of aerosolized Staphylococcus aureus in a 32 m³ chamber. Increasing the ventilation rate from 3 to 6 ACH results in a reduction of microbial load in the air and on surfaces by 45% ± 10% and 44% ± 32%, respectively. The deposition rate onto internal surfaces λ_d was calculated as 1.38 ± 0.48 h^-1 . Samples of airborne and surface microorganisms taken closer to the ventilation supply showed a lower concentration than close to the extract. The findings support the importance of controlling the ventilation and the environmental parameters to mitigate both air and surface infection risks in the hospital environment.

Zoonotic Risks of Sleeping with Pets

Background: Pets are increasingly becoming part of the family and interactions between pets and their owners is changing. This results in extended and more intimate contact between owners and their pets, which give rise to zoonotic risks. Objective: To establish the presence of potential zoonotic pathogens in pets that sleep with their owner. Methods: As a pilot study, a group of 28 healthy dogs and 22 healthy cats were monitored for the presence of the zoonotic parasites Cheyletiella, Ctenocephalides spp. and Toxocara spp., the dermatophyte Microsporum canis, and the bacteria Clostridium difficile, Salmonella spp., Campylobacter jejuni and Enterobacteriaceae. This was investigated by taking samples from the fur, the footpads and the animal bed. The owners filled in a questionnaire. Results: In total, 29 of the 50 pets (58%) slept on the bed, of which 15 pets (30%) slept in the bed (under the blankets). A total of 19/22 dogs (86%) and 7/22 cats (32%) tested positive for Enterobacteriaceae on the fur or footpads. Fleas were found in 5/22 of the cats’ (23%) and 2/28 of the dogs’ (7%) favourite sleeping spots. High levels of aerobic colonies were found, up to 216 colony forming units/cm². Other pathogens were not found in this study. Conclusions: The results of this preliminary study confirm literature reports that pets may constitute a potential risk in the transmission of zoonotic pathogens to their owner, especially during direct contact when sleeping in the same bed. Owners should therefore be informed about these risks and educated to interact with their pets in a more responsible way.

The antibacterial potency and antibacterial mechanism of a commercially available surface-anchoring quaternary ammonium salt (SAQAS)-based biocide in vitro

AIMS

To determine the antimicrobial potency of a surface-anchored quaternary ammonium salt (SAQAS)-based biocide during in vitro wet and dry fomite assays and to determine the mechanism of killing bacteria on the surface.

METHODS AND RESULTS

Wet and dry fomite assays were established in vitro for a commercially available biocide (SAQAS-A) applied to glass and low-density polyethylene (LDPE) surfaces. Both wet and dry fomite tests showed the active killing of Gram-positive and Gram-negative bacteria but not endospores. Assays measuring membrane permeability (ATP and DNA release), bacterial membrane potential and bacterial ROS production were correlated with the time-to-kill profiles to show SAQAS-A activity in suspension and applied to a surface.

CONCLUSIONS

SAQAS-A is an effective biocide against model strains of vegetative bacteria. The killing mechanism for SAQAS-A observed minimal membrane depolarization, a surge in ROS production and assessment of membrane permeability supported the puncture of cells in both suspension and surface attachment, leading to cell death.

SIGNIFICANCE AND IMPACT OF THE STUDY

SAQAS represents effective surface biocides against single challenges with bacteria through a mechanical killing ability that supports real-world application if their durability can be demonstrated to maintain residual activity.

Assessment of Microbial Load in Regional Hospitals in Albania

Background Contaminated hospital indoor environments can expose patients to microorganisms and different infections. The aimed study was to assess the microbial load in hospital facilities inside Albania Regional Hospitals during the period 2017-2019. Methods A cross-sectional study was conducted during the period 2017-2019 for the assessment of microbial contamination in operating rooms, resuscitation, and delivery rooms in 12 regional hospitals in Albania. One thousand and three hundred microbiological specimens were collected from air and surfaces using 5% sheep blood agar (Oxoid, UK) and processed at IPH microbiology laboratory following the standard bacteriological procedures Data were analyzed using Statistical Software Package for Social Sciences (SPSS) version 23. Results Out of the total number of samples, 1148 (88.3%) were collected from surfaces and 152 (11.7%) were from the air. Bacterial growth was identified in 314 (24.2%) out of 1300 samples (95% CI 21.89–26.62). From the total site samples processed during the study period, bacterial growth showed 282 (89.8%) samples from surfaces and 32 (10.2%) air samples. There was found a significant association p-value =0.035. Regarding the sampling place collection, the largest number were collected in operating rooms (60.3%) followed by emergency rooms (28.2%), ICUs (7.7%), and maternity units (3.8%). Gram-negative isolates were predominant at 235 (74.8%), while the Gram-positive were at 60 (19.1%). E. coli was the most frequent bacterial isolate (50%) followed by Pseudomonas aeruginosa (23.6%), Staphylococcus aureus (19.1%), and Klebsiella pneumoniae (1.3%). Also, we found a fungal agent such as Aspergillus in 19 (6.1%) samples. The isolated bacteria's overall drug resistance profile revealed that 66.8% of gram-positive bacteria were resistant to two or more antimicrobial drugs tested. Conclusion This study revealed that the surface and air and air within different wards of the hospitals studied were contaminated with different types of bacteria. Bacterial loads on the surface and air exceeded normal limits. Additionally, the study pointed out high levels of antimicrobial resistance to the drugs commonly prescribed for isolates. Therefore, intervention strategies need to be strengthened to expand infection prevention practices in hospitals. Continuous monitoring and monitoring of in-hospital pathogen types and susceptibility patterns should be performed on a very regular basis.

The Evaluation of Electrolyzed Water, Sodium Dichloroisocyanurate and Peracetic Acid with Hydrogen Peroxide for the Disinfection of Patient Room Surfaces

BACKGROUND

Sporicidal disinfectants are necessary to control Clostridioides difficile and Candida auris. Novel application methods such as electrostatic sprayers may increase disinfection effectiveness. We employed a standardized protocol to assess three sporicidal disinfectants: electrolyzed water (EW), sodium dichloroisocyanurate (NaDCC) and peracetic acid/hydrogen peroxide (PAA/H₂O₂).

METHODS

The study was conducted at two New York City hospitals (1,082 total beds) over an 18-month period. The three chemicals were applied by housekeeping personnel following the hospital protocol; the use of electrostatic sprayers was incorporated into EW and NaDCC. In randomly selected rooms, five surfaces were sampled for microbial colony counts after cleaning. Data analyses were performed using negative binomial logistic regression.

RESULTS

We collected 774 samples. NaDCC-disinfected surfaces had a lower mean colony count (14 CFU) compared to PAA/H₂O₂ (18 CFU, p=0.36) and EW (37 CFU, p<.001). PAA/H₂O₂ and EW had more samples with any growth (both p<.05) compared to NaDCC. NaDCC applied with wipes and an electrostatic sprayer had the lowest number of samples with no growth and <2.5 CFU/cm² (difference not significant).

CONCLUSIONS

The use of NaDCC for surface disinfection resulted in the lowest bacterial colony counts on patient room high touch surfaces in our study.

Bacterial contamination of neglected hospital surfaces and equipment in an Algerian hospital: an important source of potential infection

Hospital surfaces are heavily contaminated with bacteria, which are a potential source of nosocomial infections. This study was undertaken to identify bacterial communities isolated from neglected hospital surfaces after cleaning routine in a Algerian public hospital. Screening of bacterial contamination in patient bed (PB), reception land-line phones (TF), door handles (DH) and medical equipment (ME) during five months generated 108 inocula. Isolates obtained were identified based on biochemical characteristics and confirmed by analysis of 16S rRNA sequences. Statistical analysis was performed to reveal possible relationship between bacterial diversity and swabbed surfaces. Our findings showed a high prevalence of bacteria in various hospital surfaces, reaching (65.25%), where a highest contaminated surface was the PB (47.22%) and a lowest contaminated was TF (5.55%). Gram negative bacteria were the dominant group (62.03%) mainly represented by Entrobacteriaceae (42.59%), whereas Staphylococcus aureus belonging to Gram positive was the main expanded pathogen with (15.74%).

Antimicrobial resistance in Staphylococcus pseudintermedius on the environmental surfaces of a recently constructed veterinary hospital in Southern Thailand

Background and Aim:

Staphylococcus pseudintermedius is a zoonotic bacterium commonly found in animals, especially dogs. These bacteria can survive on environmental surfaces for several months. The infection of S. pseudintermedius from the environment is possible, but properly cleaning surface objects can prevent it. This study aimed to investigate the prevalence of methicillin-resistant S. pseudintermedius (MRSP) in the environment of a recently constructed veterinary hospital in Southern Thailand, where we hypothesized that the prevalence of MRSP might be very low.

Materials and Methods:

At three different time points, 150 samples were collected from different environmental surfaces and wastewater across the veterinary hospital. The collection was done after the hospital’s cleaning. Bacteria were purified in the culture before being identified as species by biochemical tests and polymerase chain reaction (PCR). Next, the antimicrobial-resistant profile was performed using an automated system (Vitek 2). Finally, the antimicrobial resistance genes were identified using PCR.

Results:

Fifteen colonies of S. pseudintermedius were isolated from the surfaces of eight floors, four tables, two chairs, and one rebreathing tube. Fourteen colonies (93.3%) were multidrug-resistant (MDR) and carried the blaZ gene (93.3%). The majority of colonies were resistant to benzylpenicillin (93.3%), cefovecin (93.3%), ceftiofur (93.3%), kanamycin (93.3%), and neomycin (93.3%). Notably, only four colonies (26.7%) were methicillin-susceptible S. pseudintermedius, whereas 11 colonies (73.3%) were MRSP and carried both the mecA and blaZ genes. Five MRSP (45.5%) were resistant to at least 14 antimicrobial drugs, represented as extensively drug-resistant (XDR) bacteria. Ten of eleven MRSP (90.9%) were Staphylococcal chromosomal mec type V, while another displayed untypeable. Despite the routine and extensive cleaning with detergent and disinfectant, MRSP isolates were still detectable.

Conclusion:

Many isolates of MRSP were found in this veterinary hospital. Almost all of them were MDR, and nearly half were XDR, posing a threat to animals and humans. In addition, the current hospital cleaning procedure proved ineffective. Future research should be conducted to determine the bacterial biofilm properties and bacterial sensitivity to certain detergents and disinfectants.

A Better Disinfectant for Low-Resourced Hospitals? A Multi-Period Cluster Randomised Trial Comparing Hypochlorous Acid with Sodium Hypochlorite in Nigerian Hospitals: The EWASH Trial

Environmental hygiene in hospitals is a major challenge worldwide. Low-resourced hospitals in African countries continue to rely on sodium hypochlorite (NaOCl) as major disinfectant. However, NaOCl has several limitations such as the need for daily dilution, irritation, and corrosion. Hypochlorous acid (HOCl) is an innovative surface disinfectant produced by saline electrolysis with a much higher safety profile. We assessed non-inferiority of HOCl against standard NaOCl for surface disinfection in two hospitals in Abuja, Nigeria using a double-blind multi-period randomised cross-over study. Microbiological cleanliness [Aerobic Colony Counts (ACC)] was measured using dipslides. We aggregated data at the cluster-period level and fitted a linear regression. Microbiological cleanliness was high for both disinfectant (84.8% HOCl; 87.3% NaOCl). No evidence of a significant difference between the two products was found (RD = 2%, 90%CI: -5.1%-+0.4%; p-value = 0.163). We cannot rule out the possibility of HOCl being inferior by up to 5.1 percentage points and hence we did not strictly meet the non-inferiority margin we set ourselves. However, even a maximum difference of 5.1% in favour of sodium hypochlorite would not suggest there is a clinically relevant difference between the two products. We demonstrated that HOCl and NaOCl have a similar efficacy in achieving microbiological cleanliness, with HOCl acting at a lower concentration. With a better safety profile, and potential applicability across many healthcare uses, HOCl provides an attractive and potentially cost-efficient alternative to sodium hypochlorite in low resource settings.

Comparative analysis of surface sanitization protocols on the bacterial community structures in the hospital environment

OBJECTIVES

In hospital hygiene it remains unclear to which extent surface contamination might represent a potential reservoir for nosocomial pathogens. This study investigates the effects of different sanitization strategies on the microbial structures and the ecological balance of the environmental microbiome in the clinical setting.

METHODS

Three cleaning regimes (disinfectants, detergents and probiotics) were applied subsequently in 9 independent patient rooms at a neurological ward (Charité, Berlin). Weekly sampling procedures included 3 different environmental sites: floor, doorhandle and sink. Characterization of the environmental microbiota and detection of antibiotic resistance genes (ARGs) were performed by 16S rRNA sequencing and multiplex Taq-Man qPCR assays, respectively.

RESULTS

Our results showed a displacement of the intrinsic environmental microbiota after probiotic sanitization, which reached statistical significance in the sink samples (Median 16S-rRNA copies = 138.3; IQR: 24.38-379.5) when compared to traditional disinfection measures (Median 16S-rRNA copies = 1343; IQR: 330.9-9479; p<0.05). This effect was concomitant with a significant increase of the alpha-diversity metrics in both the floor (p<0.001) and the sink samples (p<0.01) during the probiotic strategy. We did not observe a sanitization-dependent change of relative pathogen abundance at any tested site, but a significant reduction of the total ARGs counts in the sink samples during probiotic cleaning (mean ARGs/sample: 0.095 ± 0.067) when compared to the disinfection strategy (mean ARGs/sample: 0.386 ± 0.116; p<0.01).

CONCLUSIONS

The data presented in this study suggest the probiotic sanitization as interesting strategy in hospital hygiene management to be further analyzed and validated in randomized clinical studies.

Antimicrobial Photodynamic Coatings Reduce the Microbial Burden on Environmental Surfaces in Public Transportation—A Field Study in Buses

Millions of people use public transportation daily worldwide and frequently touch surfaces, thereby producing a reservoir of microorganisms on surfaces increasing the risk of transmission. Constant occupation makes sufficient cleaning difficult to achieve. Thus, an autonomous, permanent, antimicrobial coating (AMC) could keep down the microbial burden on such surfaces. A photodynamic AMC was applied to frequently touched surfaces in buses. The microbial burden (colony forming units, cfu) was determined weekly and compared to equivalent surfaces in buses without AMC (references). The microbial burden ranged from 0–209 cfu/cm² on references and from 0–54 cfu/cm² on AMC. The means were 13.4 ± 29.6 cfu/cm² on references and 4.5 ± 8.4 cfu/cm² on AMC (p < 0.001). The difference in microbial burden on AMC and references was almost constant throughout the study. Considering a hygiene benchmark of 5 cfu/cm², the data yield an absolute risk reduction of 22.6% and a relative risk reduction of 50.7%. In conclusion, photodynamic AMC kept down the microbial burden, reducing the risk of transmission of microorganisms. AMC permanently and autonomously contributes to hygienic conditions on surfaces in public transportation. Photodynamic AMC therefore are suitable for reducing the microbial load and closing hygiene gaps in public transportation.

Assessment of cleaning methods on bacterial burden of hospital privacy curtains: a pilot randomized controlled trial

Healthcare-associated infections (HAIs) are an important global issue, leading to poor patient outcomes. A potential route of transmission of HAIs is through contact with hospital privacy curtains. The aim of this study is to evaluate cleaning on reduction of curtain bacterial burden. In this pilot cluster randomized controlled trial we compared the bacterial burden between three groups of 24 curtains on a regional burn/plastic surgery ward. A control group was not cleaned. Two groups were cleaned at 3-4 day intervals with either disinfectant spray or wipe. The primary outcome was the difference in mean CFU/cm² between day 0 to day 21. The secondary outcome was the proportion of curtains contaminated with Methicillin-resistant Staphylococcus aureus (MRSA). By day 21, the control group was statistically higher (2.2 CFU/cm²) than spray (1.3 CFU/cm²) or wipe (1.5 CFU/cm²) (p < 0.05). After each cleaning at 3-4 day intervals, the bacterial burden on the curtains reduced to near day 0 levels; however, the level increased again over the intervening 3-4 days. By day 21, 64% of control curtains were contaminated with MRSA compared to 10% (spray) and 5% (wipe) (p < 0.05). This study show that curtains start clean and progressively become contaminated with bacteria. Regularly cleaning curtains with disinfectant spray or wipes reduces bacterial burden and MRSA contamination.

Bacterial profile of high-touch surfaces, leftover drugs and antiseptics together with their antimicrobial susceptibility patterns at University of Gondar Comprehensive Specialized Hospital, Northwest Ethiopia

Background

The hospital environment serves as a source of nosocomial infections, which pose a major therapeutic challenge. Although many bacteria species are common in hospital environments, their distribution, frequency, and antimicrobial susceptibility pattern from high-touch surfaces, leftover drugs, and antiseptics in different wards remain largely unknown. Hence, the aim of this study was to assess the magnitude and frequency of bacterial contaminants and their antimicrobial susceptibility patterns.

Methods

A total of 384 samples were collected from five selected wards and processed according to standard bacteriological procedures. Samples were collected from high-touch surface using swabs and inoculated on Blood agar, MacConkey agar, Chocolate agar and Mannitol salt agar plates, and incubated at 37 °C for 24 h. On the other hand, the leftover drugs and 80% ethanol samples were collected using sterile cotton swab immersed in sterile tryptone soy broth then inoculated on culture medias and incubated at 37 °C for 24 h. Identification of bacteria species was done using the morphological characteristics, Gram stain, and biochemical tests while antimicrobial susceptibility tests were done using modified Kirby-Bauer disk diffusion technique following the Clinical Laboratory Standards Institute 2021guidelines.

Results

Among the 384 samples processed, 102 (26.6%) were culture positive and a total of 114 bacterial isolates were identified. Gram-positive bacterial isolates were predominant, 64.9%, while Gram-negatives were 35.1%. The most frequently isolated bacteria were coagulase negative Staphylococci (38.6%) followed by S. aureus (13.2%) and P. aeruginosa (11.4%). On the other hand, the proportion of bacteria isolated from surgical ward, post-natal ward, orthopedic ward, trauma ward, and neonatal intensive care unit ward were 24.6, 21, 20.2, 18.4,15.8%, respectively. Sinks were mainly contaminated with Klebsiella species (81.8%) and A. baumannii (55.6%), while A. baumannii (22.2%) was the most contaminant for 80% ethanol. Gram-positive bacteria had significantly high resistance levels to penicillin (67.6%), cotrimoxazole (67.8%), and cefepime (80%). On the other hand, Gram-negative bacteria revealed the highest resistance levels to tetracycline (82.4%), amoxicillin-clavulanic acid (76.5%), cefepime (66.7%), ceftazidime (67.5%), and piperacillin (92.3%). Moreover, the proportion of multidrug resistant bacteria isolates was 44.7%.

Conclusions

Data of the present study showed that coagulase negative Staphylococci was the dominant bacterial isolates followed by S. aureus and P. aeruginosa. The proportion of multi-drug resistant bacteria isolates was relatively high. Therefore, appropriate infection prevention and control measures should be implemented.

Health Care Environmental Hygiene: New Insights and Centers for Disease Control and Prevention Guidance

Recent research has significantly clarified the impact of optimizing patient-zone environmental hygiene. New insights into the environmental microbial epidemiology of many hospital-associated pathogens, especially Clostridioides difficile, have clarified and quantified the role of ongoing occult pathogen transmission from the near-patient environment. The recent development of safe, broadly effective surface chemical disinfectants has led to new opportunities to broadly enhance environmental hygiene in all health care settings. The Centers for Disease Control and Prevention has recently developed a detailed guidance to assist all health care settings in implementing optimized programs to mitigate health care-associated pathogen transmission from the near-patient surfaces.

Effect of ultraviolet-C light on the environmental bacterial bioburden in various veterinary facilities

OBJECTIVE

To determine the effect of a mobile UV-C disinfection device on the environmental bacterial bioburden in veterinary facilities.

SAMPLES

40 swab samples of surfaces from the operating theaters of 3 veterinary hospitals and 1 necropsy laboratory.

PROCEDURES

Various surfaces were swabbed, and collected material was eluted from the swabs in PBSS. Then, an aliquot of the sample fluid was processed with a bacteria-specific rapid metabolic assay to quantify bacterial bioburden. Each site was then treated with UV-C light with an automated disinfection device for approximately 45 minutes. The same surfaces were swabbed following UV-C treatment, and bioburden was quantified. The bioburden at additional time points, including after a second UV-C treatment, was determined for the small animal operating theater.

RESULTS

All surfaces at all sites had a persistent viable bacterial population following manual cleaning. Disinfection with UV-C achieved a mean bioburden reduction of 94% (SD, 5.2%; range, 91% to 95%) for all surfaces, compared with manual disinfection alone. Repeated UV-C treatment of the small animal operating theater reduced mean bioburden by 99% (SD, 0.8%), including no detectable bacteria on 4 of 10 surfaces.

CONCLUSIONS AND CLINICAL RELEVANCE

Disinfection with UV-C light may be a beneficial adjunct method for terminal disinfection of veterinary operating theaters to reduce environmental bioburden. (Am J Vet Res 2021;82:582-588).

Ten Thousand-Fold Higher than Acceptable Bacterial Loads Detected in Kenyan Hospital Environments: Targeted Approaches to Reduce Contamination Levels

Microbial monitoring of hospital surfaces can help identify target areas for improved infection prevention and control (IPCs). This study aimed to determine the levels and variations in the bacterial contamination of high-touch surfaces in five Kenyan hospitals and identify the contributing modifiable risk factors. A total of 559 high-touch surfaces in four departments identified as high risk of hospital-acquired infections were sampled and examined for bacterial levels of contamination using standard bacteriological culture methods. Bacteria were detected in 536/559 (95.9%) surfaces. The median bacterial load on all sampled surfaces was 6.0 × 10⁴ CFU/cm² (interquartile range (IQR); 8.0 × 10³–1.0 × 10⁶). Only 55/559 (9.8%) of the sampled surfaces had acceptable bacterial loads, <5 CFU/cm². Cleaning practices, such as daily washing of patient sheets, incident rate ratio (IRR) = 0.10 [95% CI: 0.04–0.24], providing hand wash stations, IRR = 0.25 [95% CI: 0.02–0.30], having running water, IRR = 0.19 [95% CI: 0.08–0.47] and soap for handwashing IRR = 0.21 [95% CI: 0.12–0.39] each significantly lowered bacterial loads. Transporting dirty linen in a designated container, IRR = 72.11 [95% CI: 20.22–257.14], increased bacterial loads. The study hospitals can best reduce the bacterial loads by improving waste-handling protocols, cleaning high-touch surfaces five times a day and providing soap at the handwash stations.

Antimicrobial susceptibility of bacterial pathogens isolated from healthcare workers' cellphones

OBJECTIVE

To evaluate bacterial isolates, antibiotic susceptibility, and disease transmission risk in healthcare workers using cellphones.

METHODS

A total of 70 cellphones were received from the hospital staff. Samples were collected from the phones with a sterile cotton swab moistened with physiological saline solution. Samples were inoculated in a bacteriological culture medium and incubated at 37.5°C for 24-48hours. Identification of microorganisms was performed by traditional methods and VITEK 2 device. Kirby-Bauer disk diffusion method was used to determine antibiotic susceptibility.

RESULTS

A total of 26 species and 170 microorganisms were isolated from 66 cellphones from which bacterial growths were obtained: coagulase-negative staphylococci (n=63, 37%) (most commonly Staphylococcus epidermidis: 25/63), Micrococcus luteus (n=25, 14.7%), Tetracoccus (n=24, 14.1%), Kocuria spp. (n=24, 14.1%), Corynebacterium diphtheriae (n=7, 4.1%), Leuconostoc mesenteroides (n=5, 3.0%), S. aureus (n=4, 2.3%), Enterococcus spp. (n=5, 2.9%), Acinetobacter spp. (n=7, 4.1%), Klebsiella pneumoniae (n=2, 1.2%), Actinomyces spp. (n=1, 0.6%), Pseudomonas aeruginosa (n=1, 0.6%), Morganella morganii (n=1, 0.6%), and Alcaligenes faecalis (n=1, 0.6%). Gram-positive isolates were all susceptible to the antibiotics used, whereas Gram-negative isolates were all resistant to ceftazidime.

CONCLUSION

Hands and/or cellphones of healthcare staff can be contaminated with various types of microorganisms. We recommend proper hand washing and disinfection to prevent bacterial pathogens spread within the hospital.

Patient Safety Related to Microbiological Contamination of the Environment of a Multi-Profile Clinical Hospital

Nosocomial infections pose a serious burden for hospitals, patients, and the entire society. The aim of the study was to assess the microbiological cleanliness of the hospital environment through quantitative and qualitative analysis of microbiological contamination of air and surfaces in inpatient treatment facilities, based on the example of a large clinical hospital in Poland. Data were collected between 2012 and 2018 in premises of a large teaching hospital in Gdansk using the sedimentation method and the impact method using the Aerideal apparatus (Biomerieux). In the analyzed clinical center, the microbiological cleanliness tests in most of the hospital rooms in the analyzed period showed an acceptable number of saprophytic microorganisms. Of all the tested samples, 1159 (21.8%) were positive, indicating the presence of microorganisms in the tested sample. Species potentially pathogenic for hospital patients were identified, constituting 20.8% of all positive samples (4.6% of all samples). Significantly higher proportion of microorganisms potentially dangerous to patients were isolated from sanitary facilities. Due to the potentially pathogenic microorganisms detected in the tested samples, the authors suggest that in the analyzed hospital, the areas requiring a specific level of microbiological purity should be designated and described, with [specifically] defined cleaning and disinfection protocols.

The spatial distribution of aerosols in high-speed bone burring with external irrigation

It is well-known that the use of high-speed burring devices with irrigation used in bone surgery produces aerosols, and can toss tissue particles into space. The aim of this study was to assess the spatial vertical contamination in the sterile operation field while using a high-speed cutting device at various locations. A fresh porcine knee was resected for 10 min with a high-speed burring device. To determine the spatial contamination distribution bacteria were used as a tracer. In this novel method for detecting environmental contamination droplets of the contaminated irrigation solution were collected on vertically mounted Petri dishes and the number of colony-forming units was counted. Contamination of varying intensity was observed throughout the room. The highest contamination was found perpendicular to the bur rotation axis in a distance 0.5 m from the bur, at a height of 1.4 m. Around this spot, colony-forming units count isotropically drops to less than 100 CFUs at an area of 0.5 m in diameter. The contamination decreases with increasing distance to the bur head and a main direction of contamination was identified. Placing critical sterile objects in the highly contaminated space during and after bone resection procedures should be avoided whenever possible.

Aptasensor for the detection of Methicillin resistant Staphylococcus aureus on contaminated surfaces

There is mounting evidence that contaminated hospital environment plays a crucial role in the transmission of nosocomial pathogens such as MRSA. The institution of infection control protocols is predicated on the early laboratory detection of the pathogen from relevant samples. Processing of environmental samples for the presence of bacterial contaminants in the clinical environment is poorly standardized when compared with analysis of clinical samples. The various laboratory methods available for processing environmental samples are difficult to standardized and most require a long turnaround time before results are available. In this study, we present a report of the performance of a novel pathogen aptasensor swab designed to qualitatively and quantitatively detect MRSA, on contaminated non-absorbable surfaces. The visual detection limit of the MRSA aptasensor swab was less than 100 CFU/ml and theoretically using a standard curve, was 2 CFU/ml. A relatively short turnaround time of 5 min was established for the assay while the linear range of quantitation was 10²-10⁵ CFU/ml. Engineered aptasensor targets MRSA selectively and binds to none of the other tested bacterial pathogen, on a multi-contaminated surface. This novel detection tool was easy to use and relatively cheap to produce.

Antimicrobial efficacy and durability of copper formulations over one year of hospital use

OBJECTIVE

To evaluate 3 formulations of copper (Cu)-based self-sanitizing surfaces for antimicrobial efficacy and durability over 1 year in inpatient clinical areas and laboratories.

DESIGN

Randomized control trial.

SETTING

We assessed 3 copper formulations: (1) solid alloy 80% Cu-20% Ni (integral copper), (2) spray-on 80% Cu-20% Ni (spray-on) and (3) 16% composite copper-impregnated surface (CIS). In total, 480 coupons (1 cm2) of the 3 products and control surgical grade (AISI 316) stainless steel were inserted into gaskets and affixed to clinical carts used in patient care areas (including emergency and maternity units) and on microbiology laboratory bench work spaces (n = 240). The microbial burden and assessment of resistance to wear, corrosion, and material compatibility were determined every 3 months. Participants included 3 tertiary-care Canadian adult hospital and 1 pediatric-maternity hospital.

RESULTS

Copper formulations used on inpatient units statistically significantly reduced bacterial bioburden compared to stainless steel at months 3 and 6. Only the integral copper product had significantly less bacteria than stainless steel at month 12. No statistically significant differences were detected in microbial burden between copper formulations and stainless-steel coupons on microbiology laboratory benches where bacterial counts were low overall. All mass changes and corrosion rates of the formulations were acceptable by engineering standards.

CONCLUSIONS

Copper surfaces vary in their antimicrobial efficacy after 1 year of hospital use. Frequency of cleaning and disinfection influence the impact of copper; the greatest reduction in microbial bioburden occurred in clinical areas compared to the microbiology laboratory where cleaning and disinfection were performed multiple times daily.

Staphylococcus aureus biofilm eradication by the synergistic effect exerted by PEG-coated silicon dots immobilized in silica films and light irradiation

Immobilization of PEG-covered silicon dots, PEGSiDs, on glass substrates was performed following a simple strategy involving particle embedding by a sol-gel process forming a silica film on glass slides. The obtained films, denoted as fSiO _x -PEGSiD, constitute a water-wettable, strongly supported, photoluminescent glass coating. The films showed high capacity for photosensitizing singlet oxygen (¹O₂) in the UVA when immersed in water. Staphylococcus aureus colonies formed on fSiO _x -PEGSiDs modified glasses revealed the inhibition of bacterial adhesion and bacterial growth leading to the formation of loosely-packed and smaller S. aureus colonies. Upon 350 nm light irradiation of the biofilmed fSiO _x -PEGSiDs -modified glasses, S. aureus growth was inhibited and bacteria killed reducing the number of living bacteria by three orders of magnitude. Eradication of attached bacteria was achieved by the synergistic effect exerted by a less adherent fSiO _x -PEGSiDs surface that inhibits biofilm formation and the ability of the surface to photosensitize ¹O₂ to kill bacteria.

Polymeric approach to combat drug-resistant methicillin-resistant Staphylococcus aureus

ABSTRACT

The current global death rate has threatened humans due to increase in deadly unknown infections caused by pathogenic microorganisms. On the contrary, the emergence of multidrug-resistant bacteria is also increasing which is leading to elevated lethality rate worldwide. Development of drug-resistant bacteria has become one of the daunting global challenges due to failure in approaching to combat against them. Methicillin-resistant Staphylococcus aureus (MRSA) is one of those drug-resistant bacteria which has led to increase in global mortality rate causing various lethal infections. Polymer synthesis can be one of the significant approaches to combat MRSA by fabricating polymeric coatings to prevent the spread of infections. This review provides last decade information in the development of various polymers against MRSA.

GRAPHICAL ABSTRACT

The Clean pilot study: evaluation of an environmental hygiene intervention bundle in three Tanzanian hospitals

BACKGROUND

Healthcare associated infections (HAI) are estimated to affect up to 15% of hospital inpatients in low-income countries (LICs). A critical but often neglected aspect of HAI prevention is basic environmental hygiene, particularly surface cleaning and linen management. TEACH CLEAN is an educational intervention aimed at improving environmental hygiene. We evaluated the effectiveness of this intervention in a pilot study in three high-volume maternity and newborn units in Dar es Salaam, Tanzania.

METHODS

This study design prospectively evaluated the intervention as a whole, and offered a before-and-after comparison of the impact of the main training. We measured changes in microbiological cleanliness [Aerobic Colony Counts (ACC) and presence of Staphylococcus aureus] using dipslides, and physical cleaning action using gel dots. These were analysed with descriptive statistics and logistic regression models. We used qualitative (focus group discussions, in-depth interviews, and semi-structured observation) and quantitative (observation checklist) tools to measure why and how the intervention worked. We describe these findings across the themes of adaptation, fidelity, dose, reach and context.

RESULTS

Microbiological cleanliness improved during the study period (ACC pre-training: 19%; post-training: 41%). The odds of cleanliness increased on average by 1.33 weekly during the pre-training period (CI = 1.11-1.60), and by 1.08 (CI = 1.03-1.13) during the post-training period. Cleaning action improved only in the pre-training period. Detection of S. aureus on hospital surfaces did not change substantially. The intervention was well received and considered feasible in this context. The major pitfalls in the implementation were the limited number of training sessions at the hospital level and the lack of supportive supervision. A systems barrier to implementation was lack of regular cleaning supplies.

CONCLUSIONS

The evaluation suggests that improvements in microbiological cleanliness are possible using this intervention and can be sustained. Improved microbiological cleanliness is a key step on the pathway to infection prevention in hospitals. Future research should assess whether this bundle is cost-effective in reducing bacterial and viral transmission and infection using a rigorous study design.

Development of Antimicrobial Multifunctional Textiles to Avoid from Hospital-Acquired Infections

The objectives of the present study were to develop the environmental friendly, low price, easy and fast method for developing the antibacterial cuprous oxide coated multifunctional fabrics. At first, fabrics were sensitized with citric acid then the formation of Cu₂O particles was done by Fehling solution method. In second step, the cuprous oxide particles were deposited on cotton fabrics. Three different types of reducing agents with different concentrations were selected to make the Cu₂O particles. Surface morphology and presence of metals were analysed by scanning electron microscopy, dynamic light scattering, FTIR, EDS and XRD. The antibacterial activity of cuprous oxide coated fabrics was tested against qualitative and quantitative measurements. The strongest antibacterial effect was found for the fabrics coated with cuprous oxide particles reduced with sodium hydrosulphite at 1 g/l. Furthermore, the utility of hygienic antimicrobial developed fabrics were analysed for the comfort properties regarding air permeability and stiffness. At the end, durability of coating was confirmed by measuring the antibacterial properties and SEM analysis after washing.

Antimicrobial coating is associated with significantly lower aerobic colony counts in high-touch areas in an orthopedic ward environment

BACKGROUND

Hospital acquired infections (HAI) are the most common complication found in the hospital environment. The aim of the study was to examine whether the use of an antimicrobial coating in high-touch areas in an orthopedic ward could reduce bacterial growth and HAI.

METHODS

From December 2017 to February 2018, HAI were registered on two orthopedic wards. A second registration was performed from December 2018 to February 2019. On the second occasion, an antimicrobial organosilane coating was applied just before the study period and thereafter weekly on one ward, while the other ward served as a control. Twenty defined high-touch areas on each ward were cultured before treatment and after 1, 2, 4, 8, 12, 14 and 16 weeks. Samples were cultured for aerobic colony counts, Staphylococcus aureus and E. coli.

RESULTS

The total aerobic colony counts were 47% lower on the treated ward compared with the non-treated ward over the study period (p = 0.02). The colony counts for Staphylococcus aureus and E. coli were low on both wards. During the first registration period, the incidence of HAI was 22.7% and 20.0% on the non-treated and subsequently treated ward respectively. On the second occasion, after treatment, the incidence was 25.0% and 12.5% (treated ward) respectively (p = 0.0001).

CONCLUSIONS

The use of a long-lasting antimicrobial organosilane coating appears to reduce the bioburden and reduce HAI. Since the incidence of HAI varies substantially over time, longer observation times are needed.