Hospital-based allogenic bone bank--10-year experience

Platelets: A Potential Factor that Offers Strategies for Promoting Bone Regeneration

Bone defects represent a prevalent category of clinical injuries, causing significant pain and escalating health care burdens. Effectively addressing bone defects is thus of paramount importance. Platelets, formed from megakaryocyte lysis, have emerged as pivotal players in bone tissue repair, inflammatory responses, and angiogenesis. Their intracellular storage of various growth factors, cytokines, and membrane protein receptors contributes to these crucial functions. This article provides a comprehensive overview of platelets' roles in hematoma structure, inflammatory responses, and angiogenesis throughout the process of fracture healing. Beyond their application in conjunction with artificial bone substitute materials for treating bone defects, we propose the potential future use of anticoagulants such as heparin in combination with these materials to regulate platelet number and function, thereby promoting bone healing. Ultimately, we contemplate whether manipulating platelet function to modulate bone healing could offer innovative ideas and directions for the clinical treatment of bone defects.

The effect of polyethylene glycol on printability, physical and mechanical properties and osteogenic potential of 3D-printed poly (l-lactic acid)/polyethylene glycol scaffold for bone tissue engineering

One of the challenges in critical size bone defect repairing is the use of a porous degradable scaffold with appropriate properties to the host tissue. Nowadays, the three-dimensional (3D) printing method can produce custom and personalized scaffolds and overcome the problems of traditional methods by controlling the porosity and dimensions of biomaterial scaffolds. In this study, polylactic acid/polyethylene glycol (PLA/PEG) scaffolds were prepared with different PEG percentages (0, 5, 10, 15 and 20 wt%) by fused deposition modeling (FDM) to optimize printability and achieve suitable physico-mechanical properties and also enhance cellular behavior for bone tissue engineering and actually, this study complements previous studies. Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) were employed for chemical, morphological and thermal evaluations, respectively. It was shown that the adding of 20 wt% PEG to PLA 3D printed scaffolds reduced water contact angle (from 78.16 ± 3.27 to 60.00 ± 2.16), and increased surface wettability. The results also showed that the mechanical properties of the printed scaffolds were not significantly reduced by adding 5 and 10 wt% of PEG. The addition of PEG increased the degradability of scaffolds during immersion in phosphate buffer saline (PBS) solution for 8 weeks and PLA/PEG20 scaffold with 50.96 % had the highest rate of degradation. MTT assay showed that none of the studied scaffolds had cytotoxicity against MG-63 cells and increasing the PEG levels to 20 wt%, increased cell viability and adhesion and osteogenic differentiation. According to the obtained physical, mechanical and biological results, PLA/PEG scaffold printed by the FDM method can be an appropriate candidate for use in bone repair applications.

First Reported Case of Reverse Pott’s Disease

Tuberculosis, while rare, is a disease that can have several extrapulmonary manifestations. One such known extrapulmonary manifestation of disseminated TB is vertebral osteomyelitis, often referred to as “Pott’s Disease.” We present the case of a patient who underwent back surgery with allogenic bone graft who developed vertebral osteomyelitis and subsequently had disseminated tuberculosis, from an infected bone graft. We review current guidelines for allograft tissue screening and discuss the possible need for standardizing tuberculosis screening for bone allografts.

Infection and utilization rates of bone allografts in a hospital-based musculoskeletal tissue bank in north India

BACKGROUND

The bone bank unit of interest in this article was established in January 2018, in a tertiary care teaching institute of north India. Aim of this article is to describe the sources of allografts obtained, discard rates of allografts and infection rates in the recipients after use.

MATERIAL AND METHODS

All the relevant details of donors and recipients were maintained, and donors were screened for standard inclusion and exclusion criteria before obtaining the grafts. Aerobic culture was performed before storage and just prior to use. Samples with incomplete documentation, incomplete donor screening or positive cultures were discarded. Data on surgical site infection in recipients was collected from hospital records retrospectively. Initially ELISA based serological tests were used for screening. Donor has to undergo these tests again after 6 months to account for the window period of proliferation of viruses. Nucleic acid amplification tests (NAAT) for these viral agents were introduced in the hospital in May 2018.

RESULTS

Allografts from a total of 196 donors were obtained in the bone bank over 2 years. Major source of bone was femoral heads harvested during total hip arthroplasty or hemi-arthroplasty. 44(22.4%) grafts had to be discarded. 95 allografts were used in 88 patients during this time. Most common indication for use was surgery for bone tumors (40%), followed by complex primary or revision arthroplasty (30.5%). Three (3.4%) recipients developed deep infection postoperatively.

CONCLUSION

Frozen allograft bone from hospital based bone banks is a reliable source of allografts. When meticulous precautions for sterility are followed, risk of infection is low. Monitoring of such bone banks should fall within a framework of the local legislature. Incomplete documentation is the major reason for wastage of the samples obtained. NAAT may be useful in screening of donors, as it reduces the wastage and the holding time of the allografts.

Intra-Operative Bioprinting of Hard, Soft, and Hard/Soft Composite Tissues for Craniomaxillofacial Reconstruction

Reconstruction of complex craniomaxillofacial (CMF) defects is challenging due to the highly organized layering of multiple tissue types. Such compartmentalization necessitates the precise and effective use of cells and other biologics to recapitulate the native tissue anatomy. In this study, intra-operative bioprinting (IOB) of different CMF tissues, including bone, skin, and composite (hard/soft) tissues, is demonstrated directly on rats in a surgical setting. A novel extrudable osteogenic hard tissue ink is introduced, which induced substantial bone regeneration, with ≈80% bone coverage area of calvarial defects in 6 weeks. Using droplet-based bioprinting, the soft tissue ink accelerated the reconstruction of full-thickness skin defects and facilitated up to 60% wound closure in 6 days. Most importantly, the use of a hybrid IOB approach is unveiled to reconstitute hard/soft composite tissues in a stratified arrangement with controlled spatial bioink deposition conforming the shape of a new composite defect model, which resulted in ≈80% skin wound closure in 10 days and 50% bone coverage area at Week 6. The presented approach will be absolutely unique in the clinical realm of CMF defects and will have a significant impact on translating bioprinting technologies into the clinic in the future.

The quality assessment of the University hospital bone bank in Central Serbia: the second audit after fourteen years

We analyzed the prevalence and predisposing factors for the overall rejection rate after retrieval of 267 fresh femoral head allografts over the past 7 years. The present study aimed to assess the quality system of institutional bone banking that can provide high-standard allografts with a low infection rate. Retrospective analysis of bone banking from June 2013 to December 2019 was conducted on 267 donors and 153 recipients. Of the 267 donated femoral heads, 74 were rejected, giving an overall rejection rate of 27.71%. The leading cause of allograft rejection was the inability to perform serology tests due to donor death; the absence of serological tests itself, and the donor refusal to perform the serology 6-month retest in 42 donors (15.72%). At retrieval, 12 allografts were positive, giving an overall contamination rate of 4.49%. Seven (2.62%) of the 267 allografts failed the blood screening tests. Thirteen allografts (4.86%) were discarded because of suspected damage to the packaging or disuse during surgery. An infection rate of 1.30% was found following transplantation. Over the past 7 years of bone banking, our results show that the overall rejection rate and the allograft-related infection rate correlate with international standards. The leading cause of allograft rejection was the inability to perform serology tests due to donor death and their refusal to perform the serology retests. Besides stringent aseptic allograft handling, donor motivation to participate in bone banking is extremely important for its efficient functioning.

Improved osteogenesis and angiogenesis of a novel copper ions doped calcium phosphate cement

Improving the angio1genesis potential of bone-repairing materials is vital for the repair of cancerous bone defects. It can further facilitate the delivery of active substances with osteogenesis and anti-tumor functions, ultimately promoting the formation of new bone tissues. Copper ions (Cu²⁺) have been proved to be beneficial to angiogenesis. This study developed a new type of Cu-containing calcium phosphate cement (Cu-CPC) by incorporating with copper phosphate (CuP) nanoparticles with a photothermal anti-tumor effect. The results revealed that the main phases of all hydrated CPCs were hydroxyapatite, unreacted tricalcium phosphate and calcium carbonate. But the hydration products of CPC became thinner after the incorporation of Cu²⁺. With the increase of CuP concentration, the setting time of CPC was prolonged while the injectability and the compressive strength were increased. The release concentration of Cu²⁺in vitro was among 0.01 to 0.74 mg/mL, which showed a positive relation with CuP content. Mouse bone marrow stromal cells (mBMSCs) displayed higher adhesion activity, proliferation performance and expression of osteogenic genes and proteins on CPC with 0.01 wt% CuP (0.01Cu-CPC) and 0.05 wt% CuP (0.05Cu-CPC). When human umbilical vein endothelial cells were co-cultured with 0.01Cu-CPC and 0.05Cu-CPC extracts, the proliferation and angiogenesis-related gene and protein expression were significantly increased, and the in vitro tube formation capacity was promoted. However, higher CuP content inhibited the proliferation of mBMSCs. In conclusion, CPC with 0.01 wt% and 0.05 wt% CuP nanoparticles has the potential to promote bone formation around cancerous bone defects, which would be promising for bone regeneration and treatment of bone tumors.

Application of a novel porous tantalum implant in rabbit anterior lumbar spine fusion model: in vitro and in vivo experiments

BACKGROUND

Some porous materials have been developed to enhance biologic fusion of the implants to bone in spine fusion surgeries. However, there are several inherent limitations. In this study, a novel biomedical porous tantalum was applied to in vitro and in vivo experiments to test its biocompatibility and osteocompatibility.

METHODS

Bone marrow-derived mesenchymal stem cells (BMSCs) were cultured on porous tantalum implant. Scanning electron microscope (SEM) and Cell Counting Kit-8 assay were used to evaluate the cell toxicity and biocompatibility. Twenty-four rabbits were performed discectomy only (control group), discectomy with autologous bone implanted (autograft group), and discectomy with porous tantalum implanted (tantalum group) at 3 levels: L3-L4, L4-L5, and L5-L6 in random order. All the 24 rabbits were randomly sacrificed at the different post-operative times (2, 4, 6, and 12 months; n = 6 at each time point). Histologic examination and micro-computed tomography scans were done to evaluate the fusion process. Comparison of fusion index scores between groups was analyzed using one-way analysis of variance. Other comparisons of numerical variables between groups were made by Student t test.

RESULTS

All rabbits survived and recovered without any symptoms of nerve injury. Radiographic fusion index scores at 12 months post-operatively between autograft and tantalum groups showed no significant difference (2.89 ± 0.32 vs. 2.83 ± 0.38, F = 244.60, P = 0.709). Cell Counting Kit-8 assay showed no significant difference of absorbance values between the leaching liquor group and control group (1.25 ± 0.06 vs. 1.23 ± 0.04, t = -0.644, P = 0.545), which indicated the BMSC proliferation without toxicity. SEM images showed that these cells had irregular shapes with long spindles adhered to the surface of tantalum implant. No implant degradation, wear debris, or osteolysis was observed. Histologic results showed solid fusion in the porous tantalum and autologous bone implanted intervertebral spaces.

CONCLUSION

This novel porous tantalum implant showed a good biocompatibility and osteocompatibility, which could be a valid biomaterial for interbody fusion cages.

Quality control processes in allografting: A twenty-year retrospective review of a hospital-based bone bank in Taiwan

Musculoskeletal allografts are now commonly used. To decrease the potential risks of transmission of pathogenic bacteria, fungi, or viruses to the transplant recipients, certain issues regarding the management of patients who receive contaminated allografts need to be addressed. We aimed to clarify the incidence and extent of disease transmission from allografts by analyzing the allografting procedures performed in the bone bank of our hospital over the past 20 years. We retrospectively reviewed the data from our allograft registry center on 3979 allografts that were implanted in 3193 recipients throughout a period of two decades, from July 1991 to June 2011. The source of the allografts, results of all screening tests, dates of harvesting and implantation, and recipients of all allografts were checked. With the help of the Center for Infection Control of our hospital, a strict prospective, hospital-wide, on-site surveillance was conducted, and every patient with healthcare-associated infection was identified. Fisher’s exact test was used to compare the infection rate between recipients with sterile allografts and those with contaminated allografts. The overall discard and infection rates were, respectively, 23% and 1.3% in the first decade (1991–2001); and 18.4% and 1.25% in the second decade (2001–2011). The infection rate of contaminated allograft recipients was significantly higher than that of sterile allograft recipients (10% vs. 1.15%, P < 0.01) in the second decade. Both infection and discard rates of our bone bank are comparable with those of international bone banks. Strict allograft processing and adequate prophylactic use of antibiotics are critical to prevent infection and disease transmission in such cases.

Intraoperative culture positive allograft bone and subsequent postoperative infections: a retrospective review

BACKGROUND

Obtaining intraoperative cultures of allograft bone just before use in orthopedic procedures is standard practice in many centres; however, the association between positive cultures and subsequent surgical infections is unknown. Our study had 3 goals: to determine the prevalence of positive intraoperative allograft culture and subsequent infection; to determine if, in cases of subsequent infection, organisms isolated at reoperation were the same as those cultured from the allograft at the time of the index procedure; and to assess the costs associated with performing intraoperative allograft cultures.

METHODS

In this retrospective case series, we obtained data on patients receiving allograft bone between 2009 and 2012. Patients receiving allograft with positive cultures were reviewed to identify cases of significant infection. Organisms isolated at reoperation were compared with the allograft culture taken at the time of implantation, and we performed a cost assessment.

RESULTS

Of the 996 allograft bone grafts used, 43 (4.3%) had positive intraoperative cultures and significant postoperative infections developed in 2, requiring reoperation. Antibiotics based on culture results were prescribed in 24% of cases. Organisms cultured at the time of reoperation differed from those isolated initially. The cost of performing 996 allograft cultures was $169 320.

CONCLUSION

This series suggests that rates of positive intraoperative bone allograft culture are low, and subsequent infection is rare. In cases of postoperative infection, primary allograft culture and secondary tissue cultures isolated different organisms. Costs associated with performing cultures are high. Eliminating initial culture testing could save $42 500 per year in our health region.

Post-operative infection with fresh frozen allograft: reported outcomes of a hospital-based bone bank over 14 years

Femoral head bone allografts have traditionally been used to provide mechanical stability to areas of bony deficiency, or for its osteoinductive and osteoconductive properties. Concerns have been raised over increased infection rates following the use of fresh-frozen graft tissue. This retrospective study aims to investigate the outcomes of fresh frozen femoral heads kept in a regulated, non-commercial bone bank at a university teaching hospital.The local bone bank database was used to identify released femoral heads during a 14 year study period (September 1999-December 2013) whereby a retrospective review of patient records was undertaken to determine clinical outcome. During the observed study period, 427 femoral heads were released from cold storage. Of these, 270 femoral heads had a mean follow-up of 347 days. 157 femoral heads were excluded due to insufficient follow-up data (n = 132) or discarded due to breaks in the cold chain prior to use (n = 25). Of the 270 included femoral heads, 231 (85.6 %) had no reported complications with good graft incorporation. In the remaining 39 with reported complications, only 5 (2.6 %) developed a postoperative infection. Our findings suggest that the use of fresh frozen allograft does not materially increase the risk of post-operative bacterial infection. Our reported post-operative infection rates are comparable with infection rates of other similar studies on fresh frozen allograft use.

Fast degradable citrate-based bone scaffold promotes spinal fusion

It is well known that high rates of fusion failure and pseudoarthrosis development (5~35%) are concomitant in spinal fusion surgery, which was ascribed to the shortage of suitable materials for bone regeneration. Citrate was recently recognized to play an indispensable role in enhancing osteconductivity and osteoinductivity, and promoting bone formation. To address the material challenges in spinal fusion surgery, we have synthesized mechanically robust and fast degrading citrate-based polymers by incorporating N-methyldiethanolamine (MDEA) into clickable poly(1, 8-octanediol citrates) (POC-click), referred to as POC-M-click. The obtained POC-M-click were fabricated into POC-M-click-HA matchstick scaffolds by compositing with hydroxyapatite (HA) for interbody spinal fusion in a rabbit model. Spinal fusion was analyzed by radiography, manual palpation, biomechanical testing, and histological evaluation. At 4 and 8 weeks post surgery, POC-M-click-HA scaffolds presented optimal degradation rates that facilitated faster new bone formation and higher spinal fusion rates (11.2±3.7, 80±4.5 at week 4 and 8, respectively) than the poly(L-lactic acid)-HA (PLLA-HA) control group (9.3±2.4 and 71.1±4.4) (p<0.05). The POC-M-click-HA scaffold-fused vertebrates possessed a maximum load and stiffness of 880.8±14.5 N and 843.2±22.4 N/mm, respectively, which were also much higher than those of the PLLA-HA group (maximum: 712.0±37.5 N, stiffness: 622.5±28.4 N/mm, p<0.05). Overall, the results suggest that POC-M-click-HA scaffolds could potentially serve as promising bone grafts for spinal fusion applications.

A positive bacterial culture from allograft bone at implantation does not correlate with subsequent surgical site infection

Fresh-frozen allograft bone is frequently used in orthopaedic surgery. We investigated the incidence of allograft-related infection and analysed the outcomes of recipients of bacterial culture-positive allografts from our single-institute bone bank during bone transplantation. The fresh-frozen allografts were harvested in a strict sterile environment during total joint arthroplasty surgery and immediately stored in a freezer at -78º to -68º C after packing. Between January 2007 and December 2012, 2024 patients received 2083 allografts with a minimum of 12 months of follow-up. The overall allograft-associated infection rate was 1.2% (24/2024). Swab cultures of 2083 allografts taken before implantation revealed 21 (1.0%) positive findings. The 21 recipients were given various antibiotics at the individual orthopaedic surgeon’s discretion. At the latest follow-up, none of these 21 recipients displayed clinical signs of infection following treatment. Based on these findings, we conclude that an incidental positive culture finding for allografts does not correlate with subsequent surgical site infection. Additional prolonged post-operative antibiotic therapy may not be necessary for recipients of fresh-frozen bone allograft with positive culture findings.

Cite this article: Bone Joint J 2015;97-B:427–31.

Solvent-free polymer/bioceramic scaffolds for bone tissue engineering: fabrication, analysis, and cell growth

This study examines the potential use of porous polycaprolactone (PCL) and polycaprolocatone/hydroxyapatite (PCL/HA) scaffolds fabricated through melt molding and porogen leaching for bone tissue engineering. While eliminating organic solvents is desirable, the process steps proposed in this study for uniformly dispersing HA particles (~5 μm in size) within the scaffold can also contribute to homogeneous properties for these porous composites. Poly(ethylene oxide) (PEO) was chosen as a porogen due to its similar density and melting point as PCL. Pore size of the scaffold was controlled by limiting the size of PCL and PEO particles used in fabrication. The percent of HA in the fabricated scaffolds was quantified by thermogravimetric analysis (TGA). Mechanical testing was used to compare the modulus of the scaffolds to that of bone, and the pore size distribution was examined with microcomputed tomography (μCT). Scanning electron microscopy (SEM) was used to examine the effect on scaffold morphology caused by the addition of HA particles. Both μCT and SEM results showed that HA could be incorporated into PCL scaffolds without negatively affecting scaffold morphology or pore formation. Energy-dispersive X-ray spectroscopy (EDS) and elemental mapping demonstrated a uniform distribution of HA within PCL/HA scaffolds. Murine calvaria-derived MC3T3-E1 cells were used to determine whether cells could attach on scaffolds and grow for up to 21 days. SEM images revealed an increase in cell attachment with the incorporation of HA into the scaffolds. Similarly, DNA content analysis showed a higher cell adhesion to PCL/HA scaffolds.

Preparation and evaluation of collagen-silk fibroin/hydroxyapatite nanocomposites for bone tissue engineering

A new in situ precipitation technique was developed to synthesize collagen-silk fibroin/hydroxyapatite nanocomposites. The componential properties and morphological of nanocomposites were investigated. It was revealed that the inorganic phase in the nanocomposite was carbonate-substituted hydroxyapatite with low crystallinity. Morphology studies showed that hydroxyapatite particles with size ranging from 30 to 100 nm were distributed uniformly in the polymer matrix. According to the TEM micrographs, inorganic particles were composed of more fine sub-particles whose diameters were between 2 and 5 nm in size without regular crystallographic orientation. The mechanical properties of the composites were evaluated by measuring their elastic modulus. The data indicated that the elastic modulus of nanocomposites was improved by the addition of silk fibroin. Finally, the cell biocompatibility of the composites was tested in vitro, which showed that they have good biocompatibility. These results suggest that the collagen-silk fibroin/hydroxyapatite nanocomposites are promising biomaterials for bone tissue engineering.

Angiogenesis and osteogenesis at incorporation process of onlay bone graft

PURPOSE

The roles of angiogenesis and osteogenesis in autologous and allogenic bone grafts and the use of platelet-rich plasma (PRP) as a modifier were investigated.

MATERIALS AND METHODS

Forty rabbit mandibles received onlay grafts of fresh autologous and frozen allogeneic bone. PRP was added on the right side. After intervals of 3, 7, 14, 28, and 56 days, the animals were euthanized. Hematoxylin and eosin staining was used to measure the quantity and area of osteoblasts. Sections stained with toluidine blue showed newly formed bone area. In sections with Weigert-van Gieson staining, the number of vessels and their lumens was quantified. The quantity and area of cellular arrangements expressing CD31 and the area of vessels were obtained.

RESULTS

Quantities of osteoblasts and their areas, newly formed matrices, and vessels and their lumen areas were obtained and identified by immunomarking with CD31. In general, values for these were higher in rabbits with allogeneic bone grafts and on the sides where PRP had been added. There was a variable significance between categories and days. It was confirmed that osteogenesis was intensified when angiogenesis was consolidated.

CONCLUSIONS

Angiogenesis was important for greater osteoblast differentiation and bone matrix synthesis, ensuring consolidation of onlay grafts with the receptor bed. Allogeneic grafts and PRP intensified these processes.

Synthesis and characterization of chitosan-multiwalled carbon nanotubes/hydroxyapatite nanocomposites for bone tissue engineering

Chitosan-multiwalled carbon nanotubes/hydroxyapatite nanocomposites were synthesized by a novel in situ precipitation method. The electrostatic adsorption between multiwalled carbon nanotubes and chitosan was investigated and explained by Fourier transform infrared spectroscopy analysis. Morphology studies showed that uniform distribution of hydroxyapatite particles and multiwalled carbon nanotubes in the polymer matrix was observed. In chitosan-multiwalled carbon nanotubes/hydroxyapatite nanocomposites, the diameters of multiwalled carbon nanotubes were about 10 nm. The mechanical properties of the composites were evaluated by measuring their compressive strength and elastic modulus. The elastic modulus and compressive strength increased sharply from 509.9 to 1089.1 MPa and from 33.2 to 105.5 MPa with an increase of multiwalled carbon/chitosan weight ratios from 0 to 5 %, respectively. Finally, the cell biocompatibility of the composites was tested in vitro, which showed that they have good biocompatibility. These results suggest that the chitosan-multiwalled carbon nanotubes/hydroxyapatite nanocomposites are promising biomaterials for bone tissue engineering.

Culture methods of allograft musculoskeletal tissue samples in Australian bacteriology laboratories

Samples of allograft musculoskeletal tissue are cultured by bacteriology laboratories to determine the presence of bacteria and fungi. In Australia, this testing is performed by 6 TGA-licensed clinical bacteriology laboratories with samples received from 10 tissue banks. Culture methods of swab and tissue samples employ a combination of solid agar and/or broth media to enhance micro-organism growth and maximise recovery. All six Australian laboratories receive Amies transport swabs and, except for one laboratory, a corresponding biopsy sample for testing. Three of the 6 laboratories culture at least one allograft sample directly onto solid agar. Only one laboratory did not use a broth culture for any sample received. An international literature review found that a similar combination of musculoskeletal tissue samples were cultured onto solid agar and/or broth media. Although variations of allograft musculoskeletal tissue samples, culture media and methods are used in Australian and international bacteriology laboratories, validation studies and method evaluations have challenged and supported their use in recovering fungi and aerobic and anaerobic bacteria.

The effect of purmorphamine and sirolimus on osteogenic differentiation of human bone marrow-derived mesenchymal stem cells

Small molecules have been introduced as less expensive biologically active compounds that can regulate different developmental phenomena. Purmorphamine and sirolimus are two small molecules that, according to some studies, possess certain osteomodulatory effects. This study was set out to highlight the appropriate dose and response time of these small molecules on enhancement of osteogenesis in human bone marrow-derived mesenchymal stem cells from early to mid and late stages of differentiation. Alkaline phosphatase activity, matrix mineralization and expression of osteoblast genes were quantitatively assessed in vitro. For the in vivo study, we transplanted stem cell-based constructs subcutaneously into rats, and treated them daily with the most promising doses of the small molecule. The constructs were analyzed by real-time PCR and histological staining. Our results showed that Sirolimus reduced osteogenic differentiation of mesenchymal stem cells by decreasing alkaline phosphatase activity at dose of 100nM after 14 days and mineralization of the matrix at 14 and 21 days post-induction. Purmorphamine induced up-regulation of alkaline phosphatase activity and expression of RUNX-2 at day 14. Up-regulation of osteocalcin was detected at the 3 and 5μM doses of purmorphamine on day 14 post-induction. Matrix mineralization remained unchanged in the presence or absence of purmorphamine. This dose of small molecule also accelerated expression of Alkaline phosphatase transcripts in vivo. In conclusion, sirolimus had an inhibitory effect on osteogenic differentiation of human bone marrow-derived mesenchymal stem cells; while purmorphamine, particularly at a dose of 3μM, showed a promotive effect in vitro and in vivo.

Direct scaffolding of biomimetic hydroxyapatite-gelatin nanocomposites using aminosilane cross-linker for bone regeneration

Hydroxyapatite-gelatin modified siloxane (GEMOSIL) nanocomposite was developed by coating, kneading and hardening processes to provide formable scaffolding for alloplastic graft applications. The present study aims to characterize scaffolding formability and mechanical properties of GEMOSIL, and to test the in vitro and in vivo biocompatibility of GEMOSIL. Buffer Solution initiated formable paste followed by the sol-gel reaction led to a final hardened composite. Results showed the adequate coating of aminosilane, 11-19 wt%, affected the cohesiveness of the powders and the final compressive strength (69 MPa) of the composite. TGA and TEM results showed the effective aminosilane coating that preserves hydroxyapatite-gelatin nanocrystals from damage. Both GEMOSIL with and without titania increased the mineralization of preosteoblasts in vitro. Only did titania additives revealed good in vivo bone formation in rat calvarium defects. The scaffolding formability, due to cohesive bonding among GEMOSIL particles, could be further refined to fulfill the complicated scaffold processes.

Fungal culture of musculoskeletal tissue: what's the point?

There have not been any studies that review the prevalence of fungal isolates using selective media from samples of banked musculoskeletal tissue retrieved from living and cadaveric donors. A total of 2,036 swab and 2,621 biopsy samples of musculoskeletal tissue from tissue banks were received from the 1st August 2008 till 31st December 2010. Routine culture for fungi using selective media with a prolonged incubation period failed to demonstrate a greater prevalence of fungal isolates than by using non-selective culture media alone. Using selective culture fungi were recovered from only two Sabouraud agar plates (0.1%) but not from non-selective media. During the same period fungi were isolated from three graft samples cultured in non-selective broth media only (0.1%). There was no correlation of fungal isolates from selective or non-selective media inoculated at the same time nor from multiple graft samples collected from the same donor supporting the possibility of an exogenous source for fungal isolates rather than an endogenous source.

Osteogenic activity of bone marrow-derived mesenchymal stem cells (BMSCs) seeded on irradiated allogenic bone

Allogenic bone grafting, a technique used in orthopaedic surgery, has several problems, including low osteogenic activity. To overcome the problem, this study aimed to determine whether in vivo osteogenesis could be enhanced using allogenic irradiated bone grafts after seeding with autologous bone marrow-derived mesenchymal stem cells (BMSCs). The allogenic bone cylinders were extracted from ACI rats and sterilized by irradiation. Donor BMSCs were obtained from fresh Fischer 344 (F344) rat bone marrow by cell culture. The allogenic bone with or without BMSCs were transplanted subcutaneously into syngeneic F344 rats. At 4 weeks after transplantation, high alkaline phosphatase (ALP) activity, bone-specific osteocalcin mRNA expression and newly formed bone were detected in the allogenic bone with BMSCs. The origin of the newly formed bone was derived from cultured donor BMSCs. However, none of these identifiers of osteogenesis were detected in either the fresh or the irradiated allogenic bone without BMSCs. These results indicate the availability of autologous BMSCs to heighten the osteogenic response of allogenic bone. Our present tissue-engineering method might contribute to a wide variety of allogenic bone grafting techniques in clinical settings.

Infection not associated with use of human musculoskeletal tissue allografts

The deaths of otherwise healthy patients that are attributable to contaminated allografts have heightened concerns about the screening, processing, and use of such tissues. We present one tertiary care institution's experience with musculoskeletal allografts and determine the frequency of postoperative Clostridium infection. We used an institutional microbiology database to identify all records of culture-confirmed Clostridium infection from January 1990 through July 2006. A comprehensive musculoskeletal database was cross-referenced to include all possible allograft samples surgically collected or implanted from January 1990 through July 2004 to determine the frequency of Clostridium infection associated with use of allograft musculoskeletal tissue. Musculoskeletal allografts were implanted in 16,314 patients during the study period. After a minimum follow-up of 2 years, no patient had development of a definite Clostridium infection that was attributable to the use of musculoskeletal allograft tissue. These outcomes can be achieved with established screening and processing techniques for donor tissue.

Accelerated angiogenic host tissue response to poly(L-lactide-co-glycolide) scaffolds by vitalization with osteoblast-like cells

BACKGROUND

Bone substitutes should ideally promote rapid vascularization, which could be accelerated if these substitutes were vitalized by autologous cells. Although adequate engraftment of porous poly(L-lactide-co-glycolide) (PLGA) scaffolds has been demonstrated in the past, it has not yet been investigated how vascularization is influenced by vitalization or, more precisely, by seeding PLGA scaffolds with osteoblast-like cells (OLCs). For this reason, we conducted an in vivo study to assess host angiogenic and inflammatory responses after the implantation of PLGA scaffolds vitalized with isogeneic OLCs.

MATERIALS AND METHODS

OLCs were seeded on collagen-coated PLGA scaffolds that were implanted into dorsal skinfold chambers in BALB/c mice (n = 8). Two further groups of animals received either collagen-coated (n = 8) or uncoated PLGA scaffolds (n = 8). Animals that received chambers without implants served as controls (n = 8). Angiogenesis, neovascularization, and leukocyte-endothelial cell interaction were analyzed for 14 days using intravital fluorescence microscopy.

RESULTS

PLGA scaffolds with and without OLCs showed a temporary increase in leukocyte recruitment. At day 3 after implantation, a marked angiogenic host tissue response was observed in close vicinity of all scaffolds studied. At days 6 and 10, the angiogenic response was significantly higher (p < 0.05) in PLGA scaffolds vitalized with OLCs than in uncoated or collagen-coated PLGA scaffolds. The majority of OLCs, however, died within 14 days after implantation.

CONCLUSION

Our study demonstrates that PLGA scaffold vitalization with OLCs accelerates the angiogenic response in the surrounding host tissue. Bone substitutes created by tissue engineering may thus be superior to nonvitalized substitutes although the seeded cells do not survive for long periods.

Bone tissue engineering: a review in bone biomimetics and drug delivery strategies

Critical-sized defects in bone, whether induced by primary tumor resection, trauma, or selective surgery have in many cases presented insurmountable challenges to the current gold standard treatment for bone repair. The primary purpose of a tissue-engineered scaffold is to use engineering principles to incite and promote the natural healing process of bone which does not occur in critical-sized defects. A synthetic bone scaffold must be biocompatible, biodegradable to allow native tissue integration, and mimic the multidimensional hierarchical structure of native bone. In addition to being physically and chemically biomimetic, an ideal scaffold is capable of eluting bioactive molecules (e.g., BMPs, TGF-betas, etc., to accelerate extracellular matrix production and tissue integration) or drugs (e.g., antibiotics, cisplatin, etc., to prevent undesired biological response such as sepsis or cancer recurrence) in a temporally and spatially controlled manner. Various biomaterials including ceramics, metals, polymers, and composites have been investigated for their potential as bone scaffold materials. However, due to their tunable physiochemical properties, biocompatibility, and controllable biodegradability, polymers have emerged as the principal material in bone tissue engineering. This article briefly reviews the physiological and anatomical characteristics of native bone, describes key technologies in mimicking the physical and chemical environment of bone using synthetic materials, and provides an overview of local drug delivery as it pertains to bone tissue engineering is included.

Traumatic Allogenic Bone Implantation

Traumatic allogenic bone implantation is becoming increasingly common in the setting of road trauma and suicide bombings. We present a unique case where a large bony fragment from one individual became embedded in the arm of another person following a "head-on" collision involving two motorbikes. Several management issues are outlined.

Arthroscopic grafting of greater tuberosity cyst and rotator cuff repair

Cysts of the greater tuberosity can be a normal finding independent of age and concurrent rotator cuff tear. The presence of a large greater tuberosity cyst can present a challenge at the time of rotator cuff repair. We present a 1-step arthroscopic technique to address these defects at the time of rotator cuff repair using a synthetic graft (OsteoBiologics, San Antonio, TX) originally designed to address osteoarticular defects. With the viewing portal established laterally, a portal allowing perpendicular access to the cyst is established. The cyst is thoroughly debrided, and a drill sleeve is then introduced perpendicular to the surrounding bone, serving as a guide for the matching drill to create a circular socket. A correspondingly sized TruFit BGS cylindrical implant (OsteoBiologics) is then implanted by use of the included instrumentation. The scaffold is placed flush with the surrounding bone. Because our arthroscopic rotator cuff protocol uses a tension-band technique with placement of suture anchors distal and lateral to the rotator cuff footprint, we are subsequently able to proceed with routine rotator cuff repair.

Effektivitätsanalyse einer klinikinternen allogenen Knochenbank

BACKGROUND

The EU guidelines 2004/23/EG and 2006/17/EG and their national implementation redefine the framework for allogenic bone banking and transplantation. Against this background an established internal hospital bone bank was analysed concerning threshold of allogenic bone and cost effectiveness in comparison to alternative methods.

METHOD

Over a 30-month period we registered all arrivals and outgoings of our bone bank and their destination. We further noted all declined donations. We analysed all costs incurred and calculated costs for alternative methods.

RESULTS

By means of our bone bank we are currently able to meet our own demand for bone substitutes. The maintenance costs are below the prices of alternative methods. Some donations (8%) have to be discarded due to procedural errors.

CONCLUSION

Maintaining an internal hospital bone bank utilizing fresh-frozen allogenic bone is an efficient and cost-effective method of supplying bone substitutes even under the new EU guidelines if the existing process covers most conditions of the producer authorisation according to section sign 13 AMG. By harmonizing the organizational process it is possible to further improve its effectiveness.

Sterilization of allograft bone: is 25 kGy the gold standard for gamma irradiation?

For several decades, a dose of 25 kGy of gamma irradiation has been recommended for terminal sterilization of medical products, including bone allografts. Practically, the application of a given gamma dose varies from tissue bank to tissue bank. While many banks use 25 kGy, some have adopted a higher dose, while some choose lower doses, and others do not use irradiation for terminal sterilization. A revolution in quality control in the tissue banking industry has occurred in line with development of quality assurance standards. These have resulted in significant reductions in the risk of contamination by microorganisms of final graft products. In light of these developments, there is sufficient rationale to re-establish a new standard dose, sufficient enough to sterilize allograft bone, while minimizing the adverse effects of gamma radiation on tissue properties. Using valid modifications, several authors have applied ISO standards to establish a radiation dose for bone allografts that is specific to systems employed in bone banking. These standards, and their verification, suggest that the actual dose could be significantly reduced from 25 kGy, while maintaining a valid sterility assurance level (SAL) of 10(-6). The current paper reviews the methods that have been used to develop radiation doses for terminal sterilization of medical products, and the current trend for selection of a specific dose for tissue banks.