Pre–post evaluation of effects of a titanium dioxide coating on environmental contamination of an intensive care unit: the TITANIC study

Synthesis of Chitosan-Silver Nanocomposite and Its Evaluation as an Antibacterial Coating for Mobile Phone Glass Protectors

An easy and environment-friendly route for antibacterial coating suited for mobile phone glass protectors was successfully demonstrated. In this route, freshly prepared chitosan solution in 1% v/v acetic acid was added with 0.1 M silver nitrate solution and 0.1 M sodium hydroxide solution and incubated with agitation at 70 °C to form chitosan-silver nanoparticles (ChAgNPs). Varied concentrations of chitosan solution (i.e., 0.1, 0.2, 0.4, 0.6, and 0.8% w/v) were used to investigate its particle size, size distribution, and later on, its antibacterial activity. Transmission electron microscope (TEM) imaging revealed that the smallest average diameter of silver nanoparticles (AgNPs) was 13.04 nm from 0.8% w/v chitosan solution. Further characterizations of the optimal nanocomposite formulation using UV-vis spectroscopy and Fourier transfer infrared spectroscopy were also performed. Using a dynamic light scattering zetasizer, the average ζ-potential of the optimal ChAgNP formulation was at +56.07 mV, showing high aggregative stability and an average ChAgNP size of 182.37 nm. The ChAgNP nanocoating on glass protectors shows antibacterial activity against Escherichia coli (E. coli) at 24 and 48 h of contact. However, the antibacterial activity decreased from 49.80% (24 h) to 32.60% (48 h).

Nanosilver/DCOIT-containing surface coating effectively and constantly reduces microbial load in emergency room surfaces

BACKGROUND

Colonization of near-patient surfaces in hospitals plays an important role as a source of healthcare-associated infections. Routine disinfection methods only result in short-term elimination of pathogens.

AIM

To investigate the efficiency of a newly developed antimicrobial coating containing nanosilver in long-term reduction of bacterial burden in hospital surfaces to close the gap between routine disinfection cycles.

METHODS

In this prospective, double-blinded trial, frequently touched surfaces of a routinely used treatment room in an emergency unit of a level-I hospital were treated with a surface coating (nanosilver/DCOIT-coated surface, NCS) containing nanosilver particles and another organic biocidal agent (4,5-dichloro-2-octyl-4-isothiazolin-3-one, DCOIT), whereas surfaces of another room were treated with a coating missing both the nanosilver- and DCOIT-containing ingredient and served as control. Bacterial contamination of the surfaces was examined using contact plates and liquid-based swabs daily for a total trial duration of 90 days. After incubation, total microbial counts and species were assessed.

FINDINGS

In a total of 2880 antimicrobial samples, a significant reduction of the overall bacterial load was observed in the NCS room (median: 0.31 cfu/cm²; interquartile range: 0.00-1.13) compared with the control coated surfaces (0.69 cfu/cm²; 0.06-2.00; P < 0.001). The nanosilver- and DCOIT-containing surface coating reduced the relative risk of a critical bacterial load (defined as >5 cfu/cm²) by 60% (odds ratio 0.38, P < 0.001). No significant difference in species distribution was detected between NCS and control group.

CONCLUSION

Nanosilver-/DCOIT-containing surface coating has shown efficiency for sustainable reduction of bacterial load of frequently touched surfaces in a clinical setting.

Antimicrobial Activity of a Titanium Dioxide Additivated Thermoset

The transmission of pathogens via surfaces poses a major health problem, particularly in hospital environments. Antimicrobial surfaces can interrupt the path of spread, while photocatalytically active titanium dioxide (TiO2) nanoparticles have emerged as an additive for creating antimicrobial materials. Irradiation of such particles with ultraviolet (UV) light leads to the formation of reactive oxygen species that can inactivate bacteria. The aim of this research was to incorporate TiO2 nanoparticles into a cellulose-reinforced melamine-formaldehyde resin (MF) to obtain a photocatalytic antimicrobial thermoset, to be used, for example, for device enclosures or tableware. To this end, composites of MF with 5, 10, 15, and 20 wt% TiO2 were produced by ultrasonication and hot pressing. The incorporation of TiO2 resulted in a small decrease in tensile strength and little to no decrease in Shore D hardness, but a statistically significant decrease in the water contact angle. After 48 h of UV irradiation, a statistically significant decrease in tensile strength for samples with 0 and 10 wt% TiO2 was measured but with no statistically significant differences in Shore D hardness, although a statistically significant increase in surface hydrophilicity was measured. Accelerated methylene blue (MB) degradation was measured during a further 2.5 h of UV irradiation and MB concentrations of 12% or less could be achieved. Samples containing 0, 10, and 20 wt% TiO2 were investigated for long-term UV stability and antimicrobial activity. Fourier-transform infrared spectroscopy revealed no changes in the chemical structure of the polymer, due to the incorporation of TiO2, but changes were detected after 500 h of irradiation, indicating material degradation. Specimens pre-irradiated with UV for 48 h showed a total reduction in Escherichia coli when exposed to UV irradiation.

Nanoprotection from SARS-COV-2: would nanotechnology help in Personal Protection Equipment (PPE) to control the transmission of COVID-19?

The coronavirus disease 2019 (COVID-19) has caused a worldwide outbreak. The severe acute respiratory syndrome coronavirus 2 virus can be transmitted human-to-human through droplets and close contact where personal protective equipment (PPE) is imperative to protect the individuals. The advancement of nanotechnology with significant nanosized properties can confer a higher form of protection. Incorporation of nanotechnology into facemasks can exhibit antiviral properties. Nanocoating on surfaces can achieve self-disinfecting purposes and be applied in highly populated places. Moreover, nano-based hand sanitizers can confer better sterilizing efficacies with low skin irritation as compared to alcohol-based hand sanitizers. The present review discusses the incorporation of nanotechnology into nano-based materials and coatings in facemasks, self-surface disinfectants and hand sanitizers, in the hope to contribute to the current understanding of PPE to combat COVID-19.

Antimicrobial coatings for environmental surfaces in hospitals: a potential new pillar for prevention strategies in hygiene

Recent reports provide evidence that contaminated healthcare environments represent major sources for the acquisition and transmission of pathogens. Antimicrobial coatings (AMC) may permanently and autonomously reduce the contamination of such environmental surfaces complementing standard hygiene procedures. This review provides an overview of the current status of AMC and the demands to enable a rational application of AMC in health care settings. Firstly, a suitable laboratory test norm is required that adequately quantifies the efficacy of AMC. In particular, the frequently used wet testing (e.g. ISO 22196) must be replaced by testing under realistic, dry surface conditions. Secondly, field studies should be mandatory to provide evidence for antimicrobial efficacy under real-life conditions. The antimicrobial efficacy should be correlated to the rate of nosocomial transmission at least. Thirdly, the respective AMC technology should not add additional bacterial resistance development induced by the biocidal agents and co- or cross-resistance with antibiotic substances. Lastly, the biocidal substances used in AMC should be safe for humans and the environment. These measures should help to achieve a broader acceptance for AMC in healthcare settings and beyond. Technologies like the photodynamic approach already fulfil most of these AMC requirements.

Evidence Map and Systematic Review of Disinfection Efficacy on Environmental Surfaces in Healthcare Facilities

Healthcare-associated infections (HAIs) contribute to patient morbidity and mortality with an estimated 1.7 million infections and 99,000 deaths costing USD $28-34 billion annually in the United States alone. There is little understanding as to if current environmental surface disinfection practices reduce pathogen load, and subsequently HAIs, in critical care settings. This evidence map includes a systematic review on the efficacy of disinfecting environmental surfaces in healthcare facilities. We screened 17,064 abstracts, 635 full texts, and included 181 articles for data extraction and study quality assessment. We reviewed ten disinfectant types and compared disinfectants with respect to study design, outcome organism, and fourteen indictors of study quality. We found important areas for improvement and gaps in the research related to study design, implementation, and analysis. Implementation of disinfection, a determinant of disinfection outcomes, was not measured in most studies and few studies assessed fungi or viruses. Assessing and comparing disinfection efficacy was impeded by study heterogeneity; however, we catalogued the outcomes and results for each disinfection type. We concluded that guidelines for disinfectant use are primarily based on laboratory data rather than a systematic review of in situ disinfection efficacy. It is critically important for practitioners and researchers to consider system-level efficacy and not just the efficacy of the disinfectant.

Highlights Regarding the Use of Metallic Nanoparticles against Pathogens Considered a Priority by the World Health Organization

The indiscriminate use of antibiotics has facilitated the growing resistance of bacteria, and this has become a serious public health problem worldwide. Several microorganisms are still resistant to multiple antibiotics and are particularly dangerous in the hospital and nursing home environment, and to patients whose care requires devices, such as ventilators and intravenous catheters. A list of twelve pathogenic genera, which especially included bacteria that were not affected by different antibiotics, was released by the World Health Organization (WHO) in 2017, and the research and development of new antibiotics against these genera has been considered a priority. The nanotechnology is a tool that offers an effective platform for altering the physicalchemical properties of different materials, thereby enabling the development of several biomedical applications. Owing to their large surface area and high reactivity, metallic particles on the nanometric scale have remarkable physical, chemical, and biological properties. Nanoparticles with sizes between 1 and 100 nm have several applications, mainly as new antimicrobial agents for the control of microorganisms. In the present review, more than 200 reports of various metallic nanoparticles, especially those containing copper, gold, platinum, silver, titanium, and zinc were analyzed with regard to their anti-bacterial activity. However, of these 200 studies, only 42 reported about trials conducted against the resistant bacteria considered a priority by the WHO. All studies are in the initial stage, and none are in the clinical phase of research.

Inactivation of Human Coronavirus by Titania Nanoparticle Coatings and UVC Radiation: Throwing Light on SARS-CoV-2

The newly identified pathogenic human coronavirus, SARS-CoV-2, led to an atypical pneumonia-like severe acute respiratory syndrome (SARS) outbreak called coronavirus disease 2019 (abbreviated as COVID-19). Currently, nearly 77 million cases have been confirmed worldwide with the highest numbers of COVID-19 cases in the United States. Individuals are getting vaccinated with recently approved vaccines, which are highly protective in suppressing COVID-19 symptoms but there will be a long way before the majority of individuals get vaccinated. In the meantime, safety precautions and effective disease control strategies appear to be vital for preventing the virus spread in public places. Due to the longevity of the virus on smooth surfaces, photocatalytic properties of "self-disinfecting/cleaning" surfaces appear to be a promising tool to help guide disinfection policies for controlling SARS-CoV-2 spread in high-traffic areas such as hospitals, grocery stores, airports, schools, and stadiums. Here, we explored the photocatalytic properties of nanosized TiO₂ (TNPs) as induced by the UV radiation, towards virus deactivation. Our preliminary results using a close genetic relative of SAR-CoV-2, HCoV-NL63, showed the virucidal efficacy of photoactive TNPs deposited on glass coverslips, as examined by quantitative RT-qPCR and virus infectivity assays. Efforts to extrapolate the underlying concepts described in this study to SARS-CoV-2 are currently underway.

Inactivation of Human Coronavirus by Titania Nanoparticle Coatings and UVC Radiation: Throwing Light on SARS-CoV-2

The newly identified pathogenic human coronavirus, SARS-CoV-2, led to an atypical pneumonia-like severe acute respiratory syndrome (SARS) outbreak called coronavirus disease 2019 (abbreviated as COVID-19). Currently, nearly 77 million cases have been confirmed worldwide with the highest numbers of COVID-19 cases in the United States. Individuals are getting vaccinated with recently approved vaccines, which are highly protective in suppressing COVID-19 symptoms but there will be a long way before the majority of individuals get vaccinated. In the meantime, safety precautions and effective disease control strategies appear to be vital for preventing the virus spread in public places. Due to the longevity of the virus on smooth surfaces, photocatalytic properties of "self-disinfecting/cleaning" surfaces appear to be a promising tool to help guide disinfection policies for controlling SARS-CoV-2 spread in high-traffic areas such as hospitals, grocery stores, airports, schools, and stadiums. Here, we explored the photocatalytic properties of nanosized TiO2 (TNPs) as induced by the UV radiation, towards virus deactivation. Our preliminary results using a close genetic relative of SAR-CoV-2, HCoV-NL63, showed the virucidal efficacy of photoactive TNPs deposited on glass coverslips, as examined by quantitative RT-qPCR and virus infectivity assays. Efforts to extrapolate the underlying concepts described in this study to SARS-CoV-2 are currently underway.

Surface Disinfection to Protect against Microorganisms: Overview of Traditional Methods and Issues of Emergent Nanotechnologies

Sterilization methods for individuals and facilities are extremely important to enable human beings to continue the basic tasks of life and to enable safe and continuous interaction of citizens in society when outbreaks of viral pandemics such as the coronavirus. Sterilization methods, their availability in gatherings, and the efficiency of their work are among the important means to contain the spread of viruses and epidemics and enable societies to practice their activities almost naturally. Despite the effective solutions given by traditional methods of surface disinfection, modern nanotechnology has proven to be an emergent innovation to protect against viruses. On this note, recent scientific breakthroughs have highlighted the ability of nanospray technology to attach to air atoms in terms of size and time-period of existence as a sterilizer for renewed air in large areas for human gatherings. Despite the ability of this method to control the outbreak of infections, the mutation of bactericidal mechanisms presents a great issue for scientists. In recent years, science has explored a more performant approach and techniques based on a surface-resistance concept. The most emergent is the self-defensive antimicrobial known as the self-disinfection surface. It consists of the creation of a bacteria cell wall to resist the adhesion of bacteria or to kill bacteria by chemical or physical changes. Besides, plasma-mediated virus inactivation was shown as a clean, effective, and human healthy solution for surface disinfection. The purpose of this article is to deepen the discussion on the threat of traditional methods of surface disinfection and to assess the state of the art and potential solutions using emergent nanotechnology.

Novel photodynamic coating reduces the bioburden on near-patient surfaces thereby reducing the risk for onward pathogen transmission: a field study in two hospitals

BACKGROUND

Near-patient surfaces are recognized as a source for hospital-acquired infections. Such surfaces act as reservoirs for microbial contamination by which pathogens can be transmitted from colonized or infected patients to susceptible patients. Routine disinfection of surfaces only results in a temporal elimination of pathogens, and recontamination inevitably occurs shortly between disinfections.

AIM

A novel antimicrobial coating based on photodynamics was tested under laboratory conditions and subsequently in a field study in two hospitals under real-life conditions.

METHODS

Identical surfaces received a photodynamic or control coating. Bacterial counts [colony-forming units (cfu)/cm²) were assessed regularly for up to 6 months.

FINDINGS

The laboratory study revealed a mean reduction of several human pathogens of up to 4.0 ± 0.3 log₁₀. The field study in near-patient environments demonstrated mean bacterial values of 6.1 ± 24.7 cfu/cm² on all control coatings. Photodynamic coatings showed a significantly lower mean value of 1.9 ± 2.8 cfu/cm² (P<0.001). When considering benchmarks of 2.5 cfu/cm² or 5 cfu/cm², the relative risk for high bacterial counts on surfaces was reduced by 48% (odds ratio 0.38, P<0.001) or 67% (odds ratio 0.27, P<0.001), respectively.

CONCLUSION

Photodynamic coatings provide a significant and lasting reduction of bacterial counts on near-patient surfaces, particularly for high bacterial loads, in addition to routine hygiene. The promising results of this proof-of-concept study highlight the need for further studies to determine how this novel technology is correlated with the frequency of hospital-acquired infections.

Continuous room decontamination technologies

The contaminated surface environment in the rooms of hospitalized patients is an important risk factor for the colonization and infection of patients with multidrug-resistant pathogens. Improved terminal cleaning and disinfection have been demonstrated to reduce the incidence of health care-associated infections. In the United States, hospitals generally perform daily cleaning and disinfection of patient rooms. However, cleaning and disinfection are limited by the presence of the patient in room (eg, current ultraviolet devices and hydrogen peroxide systems cannot be used) and the fact that after disinfection pathogenic bacteria rapidly recolonize surfaces and medical devices/equipment. For this reason, there has been great interest in developing methods of continuous room disinfection and/or "self-disinfecting" surfaces. This study will review the research on self-disinfecting surfaces (eg, copper-coated surfaces and persistent chemical disinfectants) and potential new room disinfection methods (eg, "blue light" and diluted hydrogen peroxide systems).

Environmental disinfection with photocatalyst as an adjunctive measure to control transmission of methicillin-resistant Staphylococcus aureus: a prospective cohort study in a high-incidence setting

Background

Environmental disinfection with continuously antimicrobial surfaces could offer superior control of surface bioburden. We sought to decide the efficacy of photocatalyst antimicrobial coating in reducing methicillin-resistant Staphylococcus aureus (MRSA) acquisition in high incidence setting.

Methods

We performed prospective cohort study involving patients hospitalized in medical intensive care unit. A titanium dioxide-based photocatalyst was coated on high touch surfaces and walls. Five months of pre-intervention data were compared with five months of post-intervention data. The incidence rates of multidrug-resistant organism acquisition and the rates of hospital-acquired blood stream infection, pneumonia, urinary tract infection, and Clostridium difficile–associated diseases were compared using Cox proportional hazards regression analysis.

Results

In total, 621 patients were included. There was significant decrease in MRSA acquisition rate after photocatalyst coating (hazard ratio, 0.37; 95% confidence interval, 0.14–0.99; p = 0.04). However, clinical identification of vancomycin-resistant Enterococcus spp. and multidrug-resistant Acinetobacter baumannii did not decrease significantly. The hazard of contracting hospital-acquired pneumonia during the intervention period compared to baseline period was 0.46 (95% confidence interval, 0.23–0.94; p = 0.03).

Conclusions

In conclusion, MRSA rate was significantly reduced after photocatalyst coating. We provide evidence that photocatalyst disinfection can be an adjunctive measure to control MRSA acquisition in high-incidence settings.

Trial registration

ISRCTN Registry (ISRCTN31972004). Registered retrospectively on November 19, 2018.

Electronic supplementary material

The online version of this article (10.1186/s12879-018-3555-1) contains supplementary material, which is available to authorized users.