Synergistic separation of yttrium ions in lanthanide series from rare earths mixture via hollow fiber supported liquid membrane

Effect of solution chemistry on filtration performances and fouling potential of membrane processes for rare earth element recovery from red mud

Rare earth elements or REEs are a vital and irreplaceable part of our modern technological and digital industries. Among the REEs that are the most critical to be recovered are Ce, La, and particularly, Nd, and Y, due to high demand and at a potential future supply risk. Innovative techniques must be considered to recover REEs from secondary resources. In this study, REEs are extracted from iron mining sludge from Central Anatolia in Turkey. Two different acid solutions were compared, one with a higher acid content (120 ml HCl and 80 ml HNO₃ per liter) and one with lower acid content (20 ml HNO₃ per liter). Nanofiltration, as a process to concentrate the acidic leachate and increase the REE concentration, was carried out at pH levels of 1.5, 2.5, and 3.5 and under 12, 18, and 24 bar operating pressures. SLM studies had been carried out using a PVDF membrane with a pore diameter of 0.45 μm, with three different carriers to separate the REEs from other major elements in the concentrated leachate. Through this analysis, the optimum operating conditions for nanofiltration are at pH 3.5 at 12 bar, using the leach with low acidity, achieving about 90% recovery efficiency of the REEs. SLM studies using 0.3M D2EHPA, with a 3-h reaction time, showed the highest mass flux values for the REEs. Nanofiltration and SLM represent novel methods of REE concentration and extraction from iron mining sludge.

Yttrium (III) Recovery with D2EHPA in Pseudo-Emulsion Hollow Fiber Strip Dispersion System

Yttrium (Y) is an essential lanthanide rare earth element and can be effectively extracted and purified using a hollow fiber supported liquid membrane (HFSLM) system. However, the stability of HFSLM system is a significant challenge. Pseudoemulsion-hollow fiber strip dispersion (PEHFSD) system, providing excellent stability, is attracting research attention. In this work, the recovery of Y(III) by PEHFSD system using di(2-ethylhexyl)phosphoric acid (D2EHPA) as a carrier was investigated. The effects of several operating parameters, including the initial concentration of Y(III) in the feed phase, the flow rate of feed, the stirring speed and the volumetric ratio of feed to strip on Y(III) separation were studied. The Y(III) transport was analyzed on the concentration ratio of Y(III) ions, percent extraction, percent stripping and overall mass transfer coefficient (K_p). The PEHFSD system outperformed HFSLM system regarding separation performance and stability. K_p of HFSLM system decreased after the second run, but K_p of PEHFSD system remained constant even at the fifth run. The dispersed droplets in the strip dispersion phase in the PEHFSD system enhanced separation performance and stability of the membrane module.

The influence of yttrium dopant on the properties of anatase nanoparticles and the performance of dye-sensitized solar cells

TiO₂ mesoporous nanoparticles (NPs) doped with yttrium (Y) ions are fabricated via an environmentally friendly and facile solvothermal method to serve as a photoanode for dye sensitized solar cells (DSSCs).