Elaboration of Impregnated Composite for Sorption of Europium and Neodymium Ions from Aqueous Solutions

Extension of a biotic ligand model for predicting the toxicity of neodymium to wheat: The effects of pH, Ca2+ and Mg2

The damage excessive neodymium (Nd) causes to animals and plants should not be underestimated. However, there is little research on the impact of pH and associated ions on the toxicity of Nd. Here, a biotic ligand model (BLM) was expanded to predict the effects of pH and chief anions on the toxic impact of Nd on wheat root elongation in a simulated soil solution. The results suggested that Nd3+ and NdOH2+ were the major ions causing phytotoxicity to wheat roots at pH values of 4.5-7.0. The Nd toxicity decreased as the activities of H+, Ca2+, and Mg2+ increased but not when the activities of K+ and Na+ increased. The results indicated that H+, Ca2+, and Mg2+ competed with Nd for binding sites. An extended BLM was developed to consider the effects of pH, H+, Ca2+, and Mg2+, and the following stability constants were obtained: logKNdBL = 2.51, logKNdOHBL = 3.90, logKHBL = 4.01, logKCaBL = 2.43, and logKMgBL = 2.70. The results demonstrated that the BLM could predict the Nd toxicity well while considering the competition of H+, Ca2+, Mg2+ and the toxic species Nd3+ and NdOH2+ for binding sites.

α-Aminobisphosphonate Copolymers Based on Poly(ε-caprolactone)s and Poly(ethylene glycol): A New Opportunity for Actinide Complexation

Original α-aminobisphosphonate-based copolymers were synthesized and successfully used for actinide complexation. For this purpose, poly(α-chloro-ε-caprolactone-co-ε-caprolactone)-b-poly(ethylene glycol)-b-poly(α-chloro-ε-caprolactone-co-ε-caprolactone) copolymers were first prepared by ring-opening copolymerization of ε-caprolactone (εCL) and α-chloro-ε-caprolactone using poly(ethylene glycol) (PEG) as a macro-initiator and tin(II) octanoate as a catalyst. The chloride functions were then converted to azide moieties by chemical modification, and finally α-aminobisphosphonate alkyne ligand (TzBP) was grafted using click chemistry, to afford well-defined poly(αTzBPεCL-co-εCL)-b-PEG-b-poly(αTzBPεCL-co-εCL) copolymers. Three copolymers, showing different α-aminobisphosphonate group ratios, were prepared (7, 18, and 38%), namely, CP8, CP9, and CP10, respectively. They were characterized by 1H and 31P NMR and size exclusion chromatography. Sorption properties of these copolymers were evaluated by isothermal titration calorimetry (ITC) with neodymium [Nd(III)] and cerium [Ce(III)] cations, used as surrogates of actinides, especially uranium and plutonium, respectively. ITC enabled the determination of the full thermodynamic profile and the calculation of the complete set of thermodynamic parameter (ΔH, TΔS, and ΔG), with the Ka constant and the n stoichiometry. The results showed that the number of cations sorbed by the functional copolymers logically increased with the number of bisphosphonate functions borne by the macromolecular chain, independently of the complexed cation. Additionally, CP9 and CP10 copolymers showed higher sorption capacities [21.4 and 34.0 mg·g-1 for Nd(III) and 9.6 and 14.3 mg·g-1 for Ce(III), respectively] than most of the systems previously described in the literature. CP9 also showed a highest binding constant (7000 M-1). These copolymers, based on non-toxic and biocompatible poly(ε-caprolactone) and PEG, are of great interest for external body decontamination of actinides as they combine high number of complexing groups, thus leading to great decontamination efficiency, and limited diffusion through the skin due to their high-molecular weight, thus avoiding additional possible internal contamination.

Post-irradiation physicochemical features of polymer composite for the removal of Co(II) and Nd(III) from aqueous solutions

The scientific impact of this work is the protection of the environment from hazardous pollutants. Gamma irradiation was employed for the preparation of a new composite polymer by irradiating a mixture containing polyvinyl pyrrolidone (PVP), hydroxyethyl methacrylate (HEMA), and tannic acid (TA) to produce PVP-HEMA-TA. The sorption efficiency and capacity of PVP-HEMA-TA were evaluated by studying some factors affecting the sorption of Nd(III) and Co(II) from aqueous solutions. The results demonstrated that the maximum uptake was 92.4 and 75.3% for Nd(III) and Co(II), respectively. From the kinetic studies, the pseudo-second-order equation could better fit the data than the pseudo-first-order for the sorption of both ions. The sorption isotherm investigations illustrated that the Langmuir equation fits the gained data better than Freundlich equation. The Langmuir capacity was 64.5 and 60.8 mg/g for neodymium and cobalt ions, respectively. The applicability of Langmuir equation is strong evidence that the process is limited by a chemisorption mechanism. Findings of the work highlight the potential utilization of PVP-HEMA-TA as an effective and recyclable material for the elimination of Nd(III) and Co(II) from the aqueous phase.

Graphene oxide modified with carboxymethyl cellulose for high adsorption capacities towards Nd(III) and Ce(III) from aqueous solutions

This work addresses a simple method to functionalize graphene oxide with sodium carboxymethyl cellulose using tetraethyl orthosilicate as a linker for rapid and significant removal of Nd(III) and Ce(III) from aqueous solutions. The prepared composite (GO–CMC) was characterized by different techniques to confirm the modification and adsorption process. The sorption performance of the GO–CMC was evaluated using Nd(III) and Ce(III) as absorbent materials. The experimental results demonstrated that the sorption process was excellently fitted by the pseudo-second-order kinetic model. The adsorption results were also analyzed by different isotherm models. According to the Langmuir isotherm model, the experimental sorption capacities at pH 3.0 was 661.21 and 436.55 mg/g for Nd(III) and Ce(III), respectively. The thermodynamic results indicated that the sorption process of the two examined metal ions was endothermic and spontaneous. The regenerated GO–CMC composite has a similar removal percentage to the original composite. These results confirmed that the prepared composite (GO–CMC) could be used as an effective adsorbent for Nd(III) and Ce(III) from certain multielement solutions.

Lanthanide recovery by silica-Cyanex 272 material immobilized in alginate matrix

Mesoporous silica impregnate with Cyanex 272 (bis/2,4,4-trimethylpentyl/phosphinic acid) extractant was immobilized into an alginate matrix to obtain a composite sorbent easy to use and applicable in fixed-bed column continuous systems. The sorption efficiency of this material was tested for the recovery of Eu(III) ions from aqueous solutions in batch and continuous mode. The competition among rare earths ions (europium, lanthanum, and lutetium) and among rare earths and calcium or sodium ions was investigated. High calcium concentrations strongly reduce the sorption capacity of the alginate matrix that composes the hybrid material and the Cyanex 272 impregnated into silica powder improves the rare earths' sorption performance in this calcium charged media. The experimental breakthrough curves obtained were satisfactory fitted by Thomas model.

Comparison of Jordanian and standard diatomaceous earth as an adsorbent for removal of Sm(III) and Nd(III) from aqueous solution

In this study, Jordanian diatomaceous earth (JDA) and commercial diatomaceous earth (standard diatomaceous earth, SDA) were used for adsorption of samarium (Sm)(III) and neodymium (Nd)(III) ions from aqueous solutions using batch technique as a function of initial concentration of metal ions, adsorbent dosage, ionic strength, initial pH solution, contact time, and temperature. Both adsorbents were characterized by Fourier transform infrared (FTIR), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller surface area, and cation exchange capacity (CEC). Maximum metal ion uptake was observed after 100 min of agitation, and the uptake has decreased with increasing temperature and reached a maximum at pH ≈ 5. Different types of adsorption isotherms and kinetic models were used to describe the Nd(III) and Sm(III) ion adsorption. The experimental data fitted within the following isotherms in the order Langmuir > Dubinin-Radushkevich (DR) > Freundlich and the pseudo-second-order kinetic model based on their coefficient of determination (R²), chi-square (χ²), and error function (F_error%) values. Maximum adsorption uptakes, according to the Langmuir model, were obtained as 188.679 mg/g and 185.185 mg/g for Sm(III) and 169.492 mg/g and 149.254 mg/g for Nd(III) by JDA and SDA, respectively. The results of thermodynamic parameters showed that the adsorption of Sm(III) and Nd(III) ions onto JDA and SDA is a feasible, spontaneous, exothermic, and entropy driven. The best recovery for Sm(III) and Nd(III) was obtained when the 0.05 M EDTA + 0.05 M H₃PO₄ mixture was used as an eluent.