Agar based bimetallic nanoparticles as high-performance renewable adsorbent for removal and degradation of cationic organic dyes

Advances in agar-based composites: A comprehensive review

This review article explores the developments and applications in agar-based composites (ABCs), emphasizing various constituents such as metals, clay/ceramic, graphene, and polymers across diversified fields like wastewater treatment, drug delivery, food packaging, the energy sector, biomedical engineering, bioplastics, agriculture, and cosmetics. The focus is on agar as a sustainable and versatile biodegradable polysaccharide, highlighting research that has advanced the technology of ABCs. A bibliometric analysis is conducted using the Web of Science database, covering publications from January 2020 to March 2024, processed through VOSviewer Software Version 1.6.2. This analysis assesses evolving trends and scopes in the literature, visualizing co-words and themes that underscore the growing importance and potential of ABCs in various applications. This review paper contributes by showcasing the existing state-of-the-art knowledge and motivating further development in this promising field.

Fabrication of glutathione functionalized self-assembled magnetite nanochains for effective removal of crystal violet and phenol red dye from aqueous matrix

A novel fabrication of magnetite (Fe₃O₄) nanochains, surface functionalized with glutathione (GSH), has been attempted through a basic wet reduction method, coalesced with oxidative etching for the removal of crystal violet (CV) and phenol red (PR) from an aqueous solution. The structural and functional characterizations of GSH@Fe₃O₄ MNPs were performed using SEM-EDX, DLS, XRD, and FTIR. The nanochain-structured adsorbent was found to have an average size of 24 ± 1.29 nm and a zeta potential value of - 6.44 mV. The batch experiments showed that GSH@Fe₃O₄ MNPs have a brilliant removal efficiency of 97% and 79% for CV and PR dyes, respectively, within a period of 60 min. The influence of different operational parameters like adsorbent dosage, pH, temperature, reaction time, and initial dye concentration on the removal behaviour of the adsorbent was studied in detail. The adsorbate-adsorbent reaction was tested over isotherm models, and the reaction fitted well for Langmuir isotherm with an excellent q_max value of 1619.5 mg/g and 1316.16 mg/g for CV and PR dye, respectively. The experimental results were also validated using different reaction kinetics, and it was found that the pseudo-first-order model fits well for PR dye adsorption (R² = 0.91), while adsorption of CV dye was in best agreement with the pseudo-second-order kinetic model (R² = 0.98). Thermodynamic studies revealed that the adsorption reaction was spontaneous and endothermic in nature. Furthermore, GSH@Fe₃O₄ MNPs can be reused effectively up to 5 cycles of dye removal. Major mechanisms involved in the adsorption reaction were expected to be electrostatic attraction, hydrogen bonding, and π-interactions. The efficiency of GSH@Fe₃O₄ MNPs in real water samples suggested that it has a high potential for dye removal from complex aqueous systems and could be used as an effective alternative for remediation of dyes contaminated water.

Fabrication of activated carbon supported modified with bimetallic-platin ruthenium nano sorbent for removal of azo dye from aqueous media using enhanced ultrasonic wave

Herein, activated carbon supported modified with bimetallic-platin ruthenium nano sorbent (PtRu@AC) was synthesized by a thermal decomposition process and used in the removal of methylene blue (MB) from aqueous solutions. The synthesized nano sorbents were characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and X-ray Photoelectron Spectroscopy (XPS) spectroscopic techniques. The data obtained from characterization studies showed that PtRu@AC nano sorbent was highly crystalline and in a form of PtRu alloy with a monodispersed composition. The results indicated that the maximum adsorption capacity (qemax) for the removal of MB with PtRu@AC under optimum conditions was detected to be 1.788 mmol/g (569.4 mg/g). The experimental kinetic results of the study revealed that the adsorption of methylene blue was found to be more compatible with the false second-order model compared to some tested models. Calculations for thermodynamic functions including enthalpy change (ΔHo), entropy change (ΔSo), and Gibbs free energy change (ΔGo) values were performed to get an idea about the adsorption mechanism. As a result, the synthesized PtRu@AC nano adsorbent was detected as a highly effective adsorbent material in the removal of MB from aquatic mediums.

Nanostructured Materials for Water Purification: Adsorption of Heavy Metal Ions and Organic Dyes

Chemical water pollution poses a threat to human beings and ecological systems. The purification of water to remove toxic organic and inorganic pollutants is essential for a safe society and a clean environment. Adsorption-based water treatment is considered one of the most effective and economic technologies designed to remove toxic substances. In this article, we review the recent progress in the field of nanostructured materials used for water purification, particularly those used for the adsorption of heavy metal ions and organic dyes. This review includes a range of nanostructured materials such as metal-based nanoparticles, polymer-based nanomaterials, carbon nanomaterials, bio-mass materials, and other types of nanostructured materials. Finally, the current challenges in the fields of adsorption of toxic materials using nanostructured materials are briefly discussed.

Green Synthesis of Mn + Cu Bimetallic Nanoparticles Using Vinca rosea Extract and Their Antioxidant, Antibacterial, and Catalytic Activities

This article outlines the preparation of manganese-doped copper nanoparticles (Mn + Cu NPs) using Vinca rosea (L.) leaf extract as a convenient and environmentally friendly substance. UV–vis, FT–IR, XRD, SEM–EDAX, and DLS instrumental techniques were employed to describe the physical and chemical properties of synthesized V. rosea extract-mediated Vr-Mn + Cu NPs. The synthesized Vr-Mn + Cu NPs were observed to be monodispersed and spherical, with an average size of 412 nm. The plant extract includes a variety of phytochemical components. The Vr-Mn + Cu NPs also have potential antioxidant and antibacterial properties against selected pathogens. The green synthesized Vr-Mn + Cu NPs showed a maximum inhibition zone of 16.33 ± 0.57 mm against E. coli. For dye degradation, MR, EBT, and MO showed the highest degradation percentage capabilities with Vr-Mn + Cu NP-based adsorbents, which were determined to be 78.54 ± 0.16, 87.67 ± 0.06, and 69.79 ± 0.36. The results clearly show that biosynthesized Vr-Mn + Cu NPs may be employed as an antioxidant, antibacterial, photocatalytic dye degradation, and catalytic agent, as well as being ecologically benign.

High selectivity and adsorption proficiency of surfactant-coated selenium nanoparticles for dye removal application

The rate of environmental pollution augmenting at an alarming rate due to the continuous disposal of toxic dyes directly into the environment and water streams. The direct contact of dyes with water resources directly affects the living beings. The identification of superior methods for the treatment of water pollution caused due to effluent dyes needs higher consideration among researchers for the well-being of living flora and fauna. The available methods for controlling the decontamination of water through toxic dyes have various drawbacks. So, it is highly significant to develop such materials which can easily adsorb the dyes without causing any toxic effect on the environment and living beings. While keeping all the facts in mind, the current work highlights the comparative enhancement in adsorption capacity and selectivity of Brij-58-coated selenium nanoparticles (Brij-58@Se NPs) towards the removal of bromophenol blue (BB) dye from series of chosen dyes in aqueous media. The fabricated Se NPs were methodically characterized and the adsorption behaviour displayed fast adsorption efficiency (98% within 6 min) for BB dye out of series of chosen dyes. The optimization studies were carried out to verify the influence of working variables such as pH (2.0-12.0), response time (1-10 min), dosage amount (0.1-80 mg/l) and concentration of BB dye (1-70 ppm). The adsorption process found to be best fitted for Freundlich adsorption isotherm and pseudo first-order kinetic model. The interference studies of different cationic, anionic species including dyes or metal ions suggested the higher efficiency of Brij-58@Se NPs for adsorptive removal of BB dye from aqueous media. The efficacy of the adsorbent was further tested in six different water resources and displayed 95% adsorption efficiency for BB dye in different wastewater samples. Therefore, Brij-58@Se NP is expected as a potential adsorbent for the adsorption of organic dyes from wastewater samples.

Catalytic degradation of TCE by a PVDF membrane with Pd-coated nanoscale zero-valent iron reductant

Trichloroethylene (TCE) has serious threat to ecosystem. Fe-Pd nanoparticles (NPs) are good materials for catalytic degradation of TCE but still face severe challenges including easy fouling, agglomeration, deactivation and difficult separation and reuse etc. To overcome these drawbacks, we have constructed a novel structured PVDF/Fe-Pd NPs composite membrane with nanosized surface pores to execute the TCE degradation. Results indicate the degradation shows pseudo first-order reaction kinetics and high degradation rate in the static state degradation. Furthermore, the degradation ability can be enhanced by increasing Fe and Pd contents, the degradation temperature or decreasing the degradation pH value. However, the degradation is essentially limited by the diffusion. Thus, the cross-flow degradation is further applied to promote the diffusion. By this operating model, the degradation ability of the composite membrane can be greatly improved. More importantly, the reactants always keep the purity in the membrane surface side and can be controlled to enter the membrane pore for catalytic degradation. Thus, products can be timely discharged via the membrane pores and the side reactions between reactants and products can be largely reduced. In addition, the nanosized surface pores can also prevent the Fe-Pd NPs from being fouled. In a word, the novel composite membrane shows strong degradation ability, good stability and convenient operating ability for the TEC catalytic degradation.

Comparative study of calcium alginate, ball-milled biochar, and their composites on aqueous methylene blue adsorption

In this work, a novel composite, ball-milled biochar (BMB) encapsulated in calcium-alginate (CA) beads (CA-BMB), was synthesized as an alternative adsorbent for the removal of methylene blue (MB) from an aqueous solution. Sorption performance was compared among CA, BMB, and CA-BMB composite with batch adsorption experiments. With 25% BMB and 75% alginate, the new composite resembled CA in MB adsorption. With an initial MB concentration of 50 mg L^-1, kinetics studies showed that 74% MB removal by CA-BMB was achieved within 8 h, followed by slow kinetics reaching 91% removal in 16 h. The adsorption kinetics was well explained by the Ritchie's kinetic model, indicative of energetically heterogeneous solid surface of the composite. Adsorption isotherms of BMB, CA, and CA-BMB can all be fitted with the Langmuir models; the adsorption capacity of CA-BMB (1210.7 mg g^-1) was close to that of CA (1282.2 mg g^-1) and much higher than that of BMB alone (184.1 mg g^-1). The outstanding adsorption performance suggested that CA-BMB can serve as a low-cost and eco-friendly adsorbent for MB removal from an aqueous solution.

Optimization and Evaluation of Alkali-Pretreated Paeonia Ostii Seed Coats as Adsorbent for the Removal of Mb From Aqueous Solution

A novel effi cient adsorbent, alkali-pretreated Paeonia ostii seed coats (AP-PSC), was investigated for the removal of methylene blue (MB) dye from solution. Orthogonal array design was applied to optimize the process parameters viz. alkali concentration, liquid-solid ratio (LSR) and pretreatment time. The results revealed that the optimal pretreatment conditions were at 0.8% (w/w) NaOH with LSR of 0.35 L g-1 treating for 50 min. Equilibrium and kinetic studies indicated that Langmuir isotherm and Pseudo-second-order models described the experimental data well. The maximum adsorption capability was of 368.2 mg g-1 for MB at 25oC. Thermodynamic parameters suggested that the AP-PSC adsorption process was physical, endothermic and spontaneous. Furthermore, the adsorption process was infl uenced by several interactive mechanisms, including ion-exchange, as well as Van der Waals forces and hydrogen bonds that occur concomitantly. It was concluded that AP-PSC may be potential as an effi cient adsorbent to remove MB from solution.

Synthesis of biosurfactant‐coated magnesium oxide nanoparticles for methylene blue removal and selective Pb2+ sensing

Dyes and lead (Pb2+) are toxic compounds that can contaminant water. In this study, magnesium oxide (MgO) nanoparticles (NPs) prepared using clove, i.e. Syzygium aromaticum extract [clove extract (CE)] were used for methylene blue (MB) removal and Pb2+ ion sensing in aqueous solution. Maximum 90% MB removal was achieved using MgO NPs. The MB adsorption on MgO NPs surface followed second‐order kinetics and Langmuir isotherm. MB dye was adsorbed as a monolayer on the surface of MgO NPs with maximum adsorption capacity, 5555 mg g−1. MgO NPs were also able to selectively detect lead (Pb2+) in 1 nM–200 µM range with 24 µM (3σ) limit of detection. So, CE prepared MgO NPs are useful for MB dye adsorption and metal ion sensing applications.

An overview of nanomaterials applied for removing dyes from wastewater

Organic dyes are one of the most commonly discharged pollutants in wastewaters; however, many conventional treatment methods cannot treat them effectively. Over the past few decades, we have witnessed rapid development of nanotechnologies, which offered new opportunities for developing innovative methods to treat dye-contaminated wastewater with low price and high efficiency. The large surface area, modified surface properties, unique electron conduction properties, etc. offer nanomaterials with excellent performances in dye-contaminated wastewater treatment. For examples, the agar-modified monometallic/bimetallic nanoparticles have the maximum methylene blue adsorption capacity of 875.0 mg/g, which are several times higher than conventional adsorbents. Among various nanomaterials, the carbonaceous nanomaterials, nano-sized TiO₂, and graphitic carbon nitride (g-C₃N₄) are considered as the most promising nanomaterials for removing dyes from water phase. However, some challenges, such as high cost and poor separation performance, still limit their engineering application. This article reviewed the recent advances in the nanomaterials used for dye removal via adsorption, photocatalytic degradation, and biological treatment. The modification methods for improving the effectiveness of nanomaterials are highlighted. Finally, the current knowledge gaps of developing nanomaterials on the environmental application were discussed, and the possible further research direction is proposed.

Advanced Nanomaterials for the Removal of Chemical Substances and Microbes From Contaminated and Waste Water

The development of cost-effective, efficient and stable materials helps to provide the affordable solutions to get safe and fresh water to increasing population with health guidelines of emerging contaminants. Nanomaterials (NMs)-based techniques involve the design, synthesis, manipulation, characterization and exploitation of materials for adsorption and separation of target species from the contaminated and waste water. NMs show better adsorption capacity and catalytic for number chemical species and microbes because of their small size and large surface area that favors the purification and treatment of waste or contaminated environmental water. Here, we present the chemical properties, adsorption/removal mechanism and applications of advanced NMs such as magnetic nanoparticles (MNPs), carbon nanotubes (CNTs), graphene and graphene oxide (GO), titanium oxide (TiO2), silica (SiO2), silver (Ag), gold (Au) NPs and zeolites in effective and efficient removal of toxic metal ions, organic and inorganic chemical substances and disease-causing microbes from contaminated and wastewater.

2-Dimensional graphene as a route for emergence of additional dimension nanomaterials

Dimension has a different and impactful significance in the field of innovation, research and technologies. Starting from one-dimension, now, we all are moving towards 3-D visuals and try to do the things in this dimension. However, we still have some very innovative and widely applicable nanomaterials, which have tremendous potential in the form of 2-D only i.e. graphene. In this review, we have tried to incorporate the reported pathways used so far for modification of 2-D graphene sheets to make is three-dimensional. The modified graphene been applied in many fields like supercapacitors, sensors, catalysis, energy storage devices and many more. In addition, we have also incorporated the conversion of 2-D graphene to their various other dimensions like zero-, one- or three-dimensional nanostructures.

Fe3O4@P(DVB/MAA)/Pd composite microspheres: preparation and catalytic degradation performance

Fe₃O₄@P(DVB/MAA)/Pd composite microspheres were synthesized with a combination of coating and loading processes using Fe₃O₄ nanoparticles as a core.