A facile, green synthesis of biomass carbon dots coupled with molecularly imprinted polymers for highly selective detection of oxytetracycline

Fast detection of tryptamine in meat products with azide-functionalized covalent organic frameworks confined in molecularly imprinted polymers

Tryptamine is a biogenic amine that affects organoleptic quality through the generation of off-odours in foods. Herein, imine-based covalent organic frameworks (COFs) were synthesized via Schiff base reactions and postmodified with click chemistry to generate azide-functionalized COFs with tunable azide units on the walls. The combination of molecular imprinting with COFs enabled the specific recognition of the targets. The resulting optosensing system (azide-functionalized COFs@MIPs) was used as a sample-to-answer analyser for detecting tryptamine (detection time within 10 min). A linear relationship was observed for the fluorescence response to tryptamine concentrations in the range of 3-120 μg L-1, with a limit of detection of 1.74 μg L-1. The recoveries for spiked samples were satisfactory, with relative standard deviations <9.90%. The optosensing system is a potential tool for the quantitative detection of tryptamine in meat products because of its lower cost, shorter processing time, and simpler processing steps compared to conventional chromatographic techniques.

Recent advances in molecularly imprinted polymers (MIPs) for visual recognition and inhibition of α-dicarbonyl compound-mediated Maillard reaction products

α-Dicarbonyl compounds (α-DCs) are important intermediates and precursors of harmful Maillard reaction products (e.g., acrylamide and late glycosylation end-products), and they exist widely in thermoprocessed sugar- or fat-rich foods. α-DCs and their end-products are prone to accumulation in the human body and lead to the development of various chronic diseases. Therefore, detection of α-DCs and their associated hazards in food samples is crucial. This paper reviews the preparation of molecularly imprinted polymers (MIPs) enabling visual intelligent responses and the strategies for recognition and capture of α-DCs and their associated hazards, and provides a comprehensive summary of the development of visual MIPs, including integration strategies and applications with real food samples. The visual signal responses as well as the mechanisms for hazard recognition and capture are highlighted. Current challenges and prospects for visual MIPs with advanced applications in food, agricultural and environmental samples are also discussed. This review will open new horizons regarding visual MIPs for recognition and inhibition of hazards in food safety.

Advances in valorization of sweet potato peels: A comprehensive review on the nutritional compositions, phytochemical profiles, nutraceutical properties, and potential industrial applications

During food production, food processing, and supply chain, large amounts of food byproducts are generated and thrown away as waste, which to a great extent brings about adverse consequences on the environment and economic development. The sweet potato (Ipomoea batatas L.) is cultivated and consumed in many countries. Sweet potato peels (SPPs) are the main byproducts generated by the tuber processing. These residues contain abundant nutrition elements, bioactive compounds, and other high value-added substances; therefore, the reutilization of SPP holds significance in improving their overall added value. SPPs contain abundant phenolic compounds and carotenoids, which might contribute significantly to their nutraceutical properties, including antioxidant, antimicrobial, anticancer, prebiotic, anti-inflammatory, wound-healing, and lipid-lowering effects. It has been demonstrated that SPP could be promisingly revalorized into food industry, including: (1) applications in diverse food products; (2) applications in food packaging; and (3) applications in the recovery of pectin and cellulose nanocrystals. Furthermore, SPP could be used as promising feedstocks for the bioconversion of diverse value-added bioproducts through biological processing.

Carrageenan-based active and intelligent packaging films integrated with anthocyanin and TiO2-doped carbon dots derived from sweet potato peels

Carrageenan-based sustainable active and pH-dependent color-changing composite films were fabricated by blending anthocyanin extracted from sweet potato peel (SPA) with TiO2-doped carbon dots (Ti-CDs) prepared using the biowaste of SPA extraction. The SPA and Ti-CDs were compatible with the carrageenan matrix and were uniformly dispersed in the used polymer to form a homogeneous film with increased mechanical properties. The composite film added with SPA and 3 wt% Ti-CD showed 100 % UV protection, superb antioxidant (100 % DPPH and ABTS scavenging assay), and potent antibacterial activity (complete eradication of foodborne L.monocytogenes and E. coli strains after 3 h incubation). Additionally, the composite films showed distinguishable colorimetric responses to pH 7-12 buffers and volatile ammonia. The intelligent sensing ability of the composite film was assessed through shrimp freshness monitoring, and the film's hue shifted from pink (fresh shrimp) to yellow/brown (inedible shrimp) during storage. Shrimp packaging studies have shown that composite films retard the rate of food quality change during storage and are a good indicator of shrimp spoilage. Therefore, the designed film is expected to have high applicability as a chip, and quick on-site sensor that detects seafood quality in real-time, and a highly effective multifunctional film for better product quality preservation.

Pharmaceutical pollution fingerprinting and waterbodies remediation using waste-derived carbon dots as sustainable advanced nanomaterials

The conversion of biomass waste into high-value nanomaterials such as carbon dots might represent a great advancement towards a circular economy system. Biomass wastes are an excellent choice as carbon precursors because of their wide availability, abundance, chemical composition, and eco-friendly nature. Moreover, their use as a raw material might decrease the total cost of the synthesis processes and reduce the environmental impacts. In addition, the complex composition of biomass leads to carbon dots with abundant functional groups, which in turn enhances water dispersibility and photoluminescence properties. In this manner, the effective transformation of biomass wastes into carbon dots reduces environmental pollution through the inadequate management of waste while producing carbon dots with enhanced performances. Therefore, this review describes biomass wastes as potential candidates for the synthesis of carbon dots through different synthesis methods. In addition, we have analyzed the great potential of biomass-derived carbon dots (CDs) for the degradation and detection of emerging pharmaceutical pollutants by promoting a circular economy approach. Finally, we identified current challenges to propose possible research directions for the large-scale and sustainable synthesis of high-quality biomass-derived CDs.

Self-checking dual-modal aptasensor based on hybrid Z-scheme heterostructure of Zn-defective CdS/ZnS for oxytetracycline detection

Electrochemical detection methods have been widely used for trace target detection with satisfactory results. However, most of the existing electrochemical sensors rely only on single signal output, which inevitably suffer from the interference of the complex matrix of real samples. Herein, we proposed a dual-modal aptasensor for oxytetracycline assay with self-checking function by integrating photoelectrochemical (PEC) and electrochemical (EC) signal outputs in one analysis system. Zn-defective CdS/ZnS heterostructure was synthesized and served as the photo-electroactive substrate for constructing the biorecognition process, while methylene blue (MB) was used as a dual-functional probe to enhance both PEC and EC signals. Due to the high activity of Zn-defective CdS/ZnS heterojunction and the unique dual-modal signal readout strategy, the biosensing platform exhibits superior analytical performance with the relatively wide linear range (0.01-50 ng mL^-1), lower detection limits of 1.86 pg mL^-1 (PEC mode) and 3.08 pg mL^-1 (EC mode), as well as good selectivity, stability and reproducibility. The proposed dual-model analytical system with self-checking function is envisioned to provide a new approach for sensitive and reliable biosensing.

Organic waste peel-assisted synthesis of ZnSe nanoparticles for solar-driven photocatalytic degradation of cationic and anionic dye

The environment and public health are currently being threatened by the water pollution caused by dyes. Finding eco-friendly and economically viable photocatalysts has been a hot issue in recent years, as photocatalytic dye degradation is essential for eliminating dye from contaminated water as compared to other methods because of the cost factor and efficiency in removing organic contaminants. Using un-doped ZnSe for degrading activity has very seldom been attempted up to this point. Therefore, the current research focuses on the use of zinc selenide nanomaterials, which are produced via a green synthesis process from the organic waste peels of orange and potato using the hydrothermal method, and utilizes them as photocatalysts for the degradation of dyes using sunlight as a natural source of light. The crystal structure, bandgap, and surface morphology and analysis of the synthesized materials serve as indicators of their characteristics. Citrate in orange peel-mediated synthesis assists in forming a particle size of 1.85 nm and a large surface area of 17.078 m2/g enabling more surface-active sites resulting in degradation efficiency of 97.16% and 93.61% for methylene blue and Congo red dye, respectively, which outperforms commercial ZnSe in the dye degradation. The presented work maintains overall sustainability in real-practical applications by utilizing sunlight in photocatalytic degradation activity instead of sophisticated equipment and using waste peels as a capping and stabilizing agent in the green synthesis method for the preparation of photocatalysts.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

Excitation-depended fluorescence emission of boron-doped graphene quantum dot as an optical probe for detection of oxytetracycline in food and information encryption patterns

The boron-doped graphene quantum dot (HSE-GQD-B) was prepared by thermal pyrolysis of the mixture of citric acid, histidine, serine and ethylenediamine and boric acid. The resulting HSE-GQD-B is composed of tiny graphene sheets with an average sheet size of 4.2 ± 0.16 nm and exhibits an excitation-depended fluorescence emission behavior. The HSE-GQD-B produces the strongest blue fluorescence of 450 nm wavelength under the excitation of 365-nm ultraviolet light and the strongest yellow fluorescence of 550-nm wavelength under the excitation of 470-nm visible light. The interaction of HSE-GQD-B with oxytetracycline molecule induces a sensitive blue fluorescence quenching process. Based on this characteristic, a fluorescence method was established for optical detection of oxytetracycline. The analytical method offers a better sensitivity, selectivity, and repeatability compared with previously reported methods. The detection of oxytetracycline attains a wide linear range of 0.02-50 μM and a detection limit of 0.0067 μM. It has been successfully applied to fluorescence detection of oxytetracycline in food samples. In addition, the HSE-GQD-B was also used as a multicolor fluorescence probe for information encryption patterns.

Progress on the luminescence mechanism and application of carbon quantum dots based on biomass synthesis

With the continuous development of carbon-based materials, a variety of new materials have emerged one after another. Carbon Quantum Dots (CQDs) have succeeded in standing out from the crowd of new materials due to their better optical properties in biomedicine, ion detection, anti-counterfeiting materials and photocatalysis. In recent years, through the continuous exploration of CQDs, research scholars have found that the organic substances or heavy metals contained in traditional ones can cause irreversible harm to people and the environment. Therefore, the application of traditional CQDs in future studies will be gradually limited. Among various new materials, biomass raw materials have the merits of good biocompatibility, lower toxicity and green and environmental protection, which largely overcome the defects of traditional materials and have attracted many scholars to focus on the research and development of various biomass CQDs. This paper summarises the optical properties, fluorescence mechanisms, synthetic methods, functionalisation modulation of biomass CQDs and their relevant research progress in the fields of ion detection, bioimaging, biomedicine, biosensing, solar cells, anti-counterfeit materials, photocatalysis and capacitors. Finally, the paper concludes with some discussion of the challenges and prospects of this exciting and promising field of application.

Smart green CQD@SiO2 hybrid coated optical fiber manifesting dual versatile absorptive and MIP features towards epinephrine detection

For the first time, in this study, a novel optical fiber biosensor is proposed and developed via coating only one smart functional layer of silica-supported carbon dots realizing the concepts of both lossy mode resonance (LMR) and molecularly imprinted polymer (MIP) for epinephrine detection. The carbon quantum dots (CQDs) are prepared using a green synthesis method and then treated with a molecularly imprinted polymer (MIP) strategy. Under ultrasonic irradiation, a SiO₂ shell was stabilized on the surface of the CQDs to graft and to provide the LMR/MIP functional layer onto the curved optical fiber surface. Accurate structural and morphological characterization confirmed the carbon quantum dot agents and also the SiO₂ supporting shells on the optical fiber, while spectroscopic analysis confirms the formation of the imprinted polymer and desirable absorbance characteristics. The experimental and numerical sensing studies revealed that the proposed sensing probe allows the rapid adsorption/desorption of epinephrine to the sensing films and highly permeable coating for studying the influence of effective parameters. Under the optimal experimental conditions, the sensitivity of the proposed LMR-based optical fiber sensor is reported to be 0.37 nm μM^-1 with a correlation coefficient of 0.99. So, sensitive detection of epinephrine at a low concentration can be guaranteed with a 0.72 mM LOD.

Green Synthesis of Carbon Nanoparticles (CNPs) from Biomass for Biomedical Applications

In this review, we summarize recent work on the "green synthesis" of carbon nanoparticles (CNPs) and their application with a focus on biomedical applications. Recent developments in the green synthesis of carbon nanoparticles, from renewable precursors and their application for environmental, energy-storage and medicinal applications are discussed. CNPs, especially carbon nanotubes (CNTs), carbon quantum dots (CQDs) and graphene, have demonstrated utility as high-density energy storage media, environmental remediation materials and in biomedical applications. Conventional fabrication of CNPs can entail the use of toxic catalysts; therefore, we discuss low-toxicity manufacturing as well as sustainable and environmentally friendly methodology with a focus on utilizing readily available biomass as the precursor for generating CNPs.

Green Carbon Dots: Synthesis, Characterization, Properties and Biomedical Applications

Carbon dots (CDs) are a new category of crystalline, quasi-spherical fluorescence, "zero-dimensional" carbon nanomaterials with a spatial size between 1 nm to 10 nm and have gained widespread attention in recent years. Green CDs are carbon dots synthesised from renewable biomass such as agro-waste, plants or medicinal plants and other organic biomaterials. Plant-mediated synthesis of CDs is a green chemistry approach that connects nanotechnology with the green synthesis of CDs. Notably, CDs made with green technology are economical and far superior to those manufactured with physicochemical methods due to their exclusive benefits, such as being affordable, having high stability, having a simple protocol, and being safer and eco-benign. Green CDs can be synthesized by using ultrasonic strategy, chemical oxidation, carbonization, solvothermal and hydrothermal processes, and microwave irradiation using various plant-based organic resources. CDs made by green technology have diverse applications in biomedical fields such as bioimaging, biosensing and nanomedicine, which are ascribed to their unique properties, including excellent luminescence effect, strong stability and good biocompatibility. This review mainly focuses on green CDs synthesis, characterization techniques, beneficial properties of plant resource-based green CDs and their biomedical applications. This review article also looks at the research gaps and future research directions for the continuous deepening of the exploration of green CDs.

Biomass-Derived Carbon Dots and Their Sensing Applications

Carbon dots (CDs) can be widely used in the field of sensing because of its good water solubility, low toxicity, high fluorescence stability and excellent biocompatibility. It has become a popular trend to prepare high-value, inexpensive, renewable and environmentally friendly CDs sensors from biomass resources. This article reviewed the research progress of biomass-derived CDs as chemical, physical and biological sensors in recent years and studied their preparation processes and sensing abilities. Furthermore, the prospects and challenges of biomass-CDs sensors were discussed. This article is expected to provide inspirations for the design, preparation and application of biomass-CDs sensors in the future.

Molecularly imprinted probe based on CdTe QDs and magnetic nanoparticles for selective recognition of malachite green in seawater and its sensing mechanisms

A magnetic molecularly imprinted probe (MMIP@QD) was synthesized by reverse microemulsion method using CdTe QDs, Fe₃O₄, and molecularly imprinted polymer as the fluorophore, magnetic carrier, and recognition sites, respectively. The nanoparticle was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, and vibrating sample magnetometry (VSM). In the optimal experimental condition, fluorescent emission intensity (measured at excitation wavelengths of 350 nm) was quenched linearly with increasing malachite green (MG) concentration from 0.8 to 28.0 μM with LOD of 0.67 μM. Simultaneously, it was observed that the maximum absorption wavelength was blue shifted gradually with the increase of MG concentration. The inner filter effect, static quenching, and band gap transition were interpreted as the mechanisms of fluorescence quenching and wavelength shift. Thermodynamic studies indicated that the quenching reaction proceeded spontaneously. The developed sensor was applied to detect MG in seawater samples. Satisfactory recoveries of MG in spiked seawater ranged from 83.6 to 122.1% with RSD < 1.8%.

Substituent derivatives of benzothiazole-based fluorescence probes for hydrazine with conspicuous luminescence properties: A theoretical study

In the present work, four probe molecules for detecting hydrazine have been designed based on the 2-(4-Acetoxy-3-benzothiazole-2-yl-phenyl)-4-methyl-thiazole- 5-carboxylic acid ethyl ester (HP1) to investigate the influence of the amino and cyano groups on the excited-state intramolecular proton transfer (ESIPT) behavior and photophysical properties. The changes in hydrogen bond strength indicate that the intramolecular hydrogen bond of all probe products is enhanced upon photoexcitation. Frontier molecular orbitals (FMOs) and natural bond orbital (NBO) reveal the driving force of ESIPT. In addition, the potential energy curves and transition state theory explain the reason for the single fluorescence phenomenon in the experiment. The simulated absorption and fluorescence spectra of HP1 and its product (HPP1) are completely consistent with the experimental results, which also verify the viewpoint. Meanwhile the cyano derivative HPP4 exhibits a larger Stokes-shift (201 nm) than that of HPP1 (145 nm) and has the same low energy barrier as HPP1. These excellent properties allow HPP4 to be a fluorescent probe with superior performance than the original molecule. In conclusion, this work can provide a theoretical basis for the design and synthesis of more sensitive fluorescent probes for the detection of hydrazine.

Novel fluorescence sensor for the selective recognition of tetracycline based on molecularly imprinted polymer-capped N-doped carbon dots

A novel fluorescent probe based on molecularly imprinted polymers (MIPs) coupled with N-doped carbon dots (CDs) was prepared and used for specific recognition and sensitive determination of tetracycline (TC). N-doped CDs were synthesized using citric acid as a carbon source and ethylenediamine as a nitrogen source by a microwave assisted pyrolysis method. The determination conditions such as the solvents, material amount, pH value, and temperature were optimized. The CDs-MIPs have the best quenching on TC in water. The proposed method used for TC determination in milk powder samples had a detection limit of 0.054 μg mL-1 and a wide range of 0.5-30 μg mL-1. Meanwhile, satisfactory recoveries were obtained ranging from 95 to 108%. Oxytetracycline, chlorotetracycline and most of the coexisting substances showed no obvious interference indicating that the CDs-MIP probe exhibited high selectivity due to the presence of imprinted sites. Charge transfer from CDs-MIPs to TC may be through the mechanism of fluorescence quenching. This work gives a feasible strategy for the synthesis of N-doped carbon dot based molecularly imprinted polymers used as a fluorescent sensor in the food analysis field.

Molecularly imprinted bulk and solgel optosensing based on biomass carbon dots derived from watermelon peel for detection of ethyl carbamate in alcoholic beverages

Biomass carbon dots synthesized by biological waste conform to the trend of ecological environmental protection and the requirements of green chemistry, which show great application potential in practice. In the study, we used watermelon peels as the raw materials to synthesize a novel blue biomass carbon dots (CDs) by a hydrothermal process with high fluorescence quantum yield of 22.8%. Through bulk polymerization and solgel method, two kinds of core-shell nanospheres were developed as fluorescent probes to recognize and detect ethyl carbamate (EC) rapidly without complex samples pretreatment. The obtained CDs@MIPs integrated the high-performance optical characteristics of CDs with excellent selectivity and adsorption of MIPs, which showed ideal linear relationships in the EC concentration range 1-120 μg L^-1 and low LOD of 0.57 μg L^-1 and 0.94 μg L^-1, respectively. Both CDs@MIPs have a short equilibration time which was around 20 min, and the imprinting factors (IF) are 4.04 and 2.62. The recoveries of the six spiked samples were satisfying, and the RSD precisions were lower than 5.57%. Gas chromatography-mass spectrometry was seen as a parallel analysis to validate the correctness of the results, which indicated the practicability and reliability of the developed method. This proposal strategy of optical sensors provided an effective channel for trace EC recognition, with numerous advantages, involving eco-friendly, low cost, high sensitivity, separation effect, and good selectivity.

Detection of tetracycline antibiotics using fluorescent "Turn-off" sensor based on S, N-doped carbon quantum dots

In recent years, antibiotic residues in food have been of great concern to regulators and consumers. In this study, a novel fluorescent sensor based on S, N-doped carbon quantum dots (S, N-CQDs) was established for rapid detection of tetracycline antibiotics (TCs). Through the internal filter effect (IFE), QDs fluorescence can be effectively quenched by TCs, endowing it an "off" condition. Under the optimal conditions, the TC concentration in the range of 1.88-60 μmol/L had a good linear relationship with the change of QDs fluorescence intensity, and the limit of detection (LOD) was calculated as 0.56 μmol/L (S/N = 3). Furthermore, the proposed "Turn-off" sensor could be employed to quickly and accurately quantify TCs residues even in milk, honey and tap water. The recovery rate was as high as between 93.61% and 102.31%. The established sensor has great application value in the fields of food safety and drug analysis, and provides broad prospects for the future food industry.

A molecularly imprinted antibiotic receptor on magnetic nanotubes for the detection and removal of environmental oxytetracycline

The detection and elimination of antibiotic contaminants, such as oxytetracycline (OTC), a broad-spectrum tetracycline antibiotic, would be of help in efficient environmental monitoring, agriculture and food safety tests. Nevertheless, currently available methodologies, which mostly rely on the chromatographic separation of OTC, suffer from low sensitivity and complicated processes. Thus, we report here on the design and synthesis of a fluorescent sensor based on molecularly imprinted magnetic halloysite nanotubes (referred to as MHNTs@FMIPs) for the effective detection and purification of OTC in actual environmental samples. The fluorescence of the MHNTs@FMIPs was quenched obviously upon loading with OTC, covering a linear concentration range of 10-300 nM with a limit of detection (LOD) as low as 8.1 nM. The imprinting factor is 4.47, indicating an excellent specificity. Furthermore, the MHNTs@FMIPs can be applied to the quantitative detection of OTC (5 cycles of 300 nM) in aquaculture wastewater and Yangtze River water, demonstrating their immense application potential.

A Review on the Use of Biochar Derived Carbon Quantum Dots Production for Sensing Applications

Since their discovery, carbon dots have attracted a great deal of interest for their perspective biological applications. Nevertheless, the quenching of carbon dots photoluminescence represents an interesting feature for quantitative analysis in very low concentration of many species. A particular approach for the production of carbon dots is the use of biochar, a carbonized biomass, as a precursor. In this work, we overview the main achievements accomplished by using biochar-derived carbon dots for detecting and quantifying inorganic and organic species. We also provide background knowledge of the main properties, production and purification routes of carbon dots.

Heavy metal ion detection using green precursor derived carbon dots

The discovery of carbon dots (CDs) for environmental remediation has gained awareness because of the diverse economically viable and environmental friendly green precursors generated from biowastes and biomass compared to the toxic inorganic quantum dots and CDs prepared from chemical precursors. This review presents the recent progress in green CDs, including their synthesis methods and sensing applications for the detection of heavy metal ions such as Iron (III), Mercury (II), Copper (II), Chromium (VI), Lead (II), Arsenic (III), Cobalt (II), Aluminum (III), Silver (I), and Gold (III) which are prominent environmental pollutants. The comparison based on selectivity, sensitivity, quantum yield, detection limit, linear concentration range, and sensing mechanisms are also reported. This review also covers the performance of doped green CDs using heteroatoms, toward the detection of heavy metal ions. Apart from the future perspectives, this review provides a general guide to use such environmental friendly CDs to detect harmful pollutants.

N-Doped Carbon Dot Hydrogels from Brewing Waste for Photocatalytic Wastewater Treatment

The brewery industry annually produces huge amounts of byproducts that represent an underutilized, yet valuable, source of biobased compounds. In this contribution, the two major beer wastes, that is, spent grains and spent yeasts, have been transformed into carbon dots (CDs) by a simple, scalable, and ecofriendly hydrothermal approach. The prepared CDs have been characterized from the chemical, morphological, and optical points of view, highlighting a high level of N-doping, because of the chemical composition of the starting material rich in proteins, photoluminescence emission centered at 420 nm, and lifetime in the range of 5.5-7.5 ns. With the aim of producing a reusable catalytic system for wastewater treatment, CDs have been entrapped into a polyvinyl alcohol matrix and tested for their dye removal ability. The results demonstrate that methylene blue can be efficiently adsorbed from water solutions into the composite hydrogel and subsequently fully degraded by UV irradiation.

Novel Metal-Free Fluorescent Sensor Based on Molecularly Imprinted Polymer N-CDs@MIP for Highly Selective Detection of TNP

In this article, we designed a fluorometric sensor based on nitrogen-passivated carbon dots infused with a molecularly imprinted polymer (N-CDs@MIP) via a reverse microemulsion technique using 3-aminopropyltriethoxysilane as a functional monomer, tetraethoxysilane as a cross-linker, and 2,4,6-trinitrophenol (TNP) as a template. The synthesized probe was used for selective and sensitive detection of trace amounts of TNP. The infusion of N-CDs (QY-21.6 percent) with a molecularly imprinted polymer can increase the fluorescent sensor sensitivity to detect TNP. Removal of template molecules leads to the formation of a molecularly imprinted layer, and N-CDs@MIP fluorescence response was quenched by TNP. The developed fluorescence probe shows a fine linear range from 0.5 to 2.5 nM with a detection limit of 0.15 nM. The synthesized fluorescent probe was used to analyze TNP in regular tap and lake water samples.

Nitrogen-doped graphene quantum dots coated with molecularly imprinted polymers as a fluorescent sensor for selective determination of warfarin

The strong photoluminescence of NGQDs and the selectivity of MIPs were combined to construct a fluorescent sensor for rapid determination of warfarin.

Dual-Channel Probe of Carbon Dots Cooperating with Lanthanide Complex Employed for Simultaneously Distinguishing and Sequentially Detecting Tetracycline and Oxytetracycline

Tetracycline (TC) and oxytetracycline (OTC) are the most widely used broad-spectrum antimicrobial agents in tetracycline drugs, and their structures and properties are very similar, so it is a great challenge to distinguish and detect these two antibiotics with a single probe at the same time. Herein, a dual-channel fluorescence probe (SiCDs@mMIPs-cit-Eu) was developed by integrating two independent reaction sites with SiCDs-doped mesoporous silica molecular imprinting group and europium complex group into a nanomaterial. The synergistic influence of inner filter effect and "antenna effect" can be guaranteed to solve the distinction between TC and OTC. Moreover, this novel strategy can also sequentially detect TC and OTC in buffer solution and real samples with high sensitivity and selectivity. This method revealed good responses to TC and OTC ranging from 0 to 5.5 μM with a detection limit of 5 and 16 nM, respectively. Combined with the smartphone color-scanning application, the portable and cheap paper-based sensor was designed to realize the multi-color visual on-site detection of TC and OTC. In addition, the logic gate device was constructed according to the fluorescence color change of the probe for TC and OTC, which provided the application possibility for the intelligent detection of the probe.

Sulfur-doped carbon dots@polydopamine-functionalized magnetic silver nanocubes for dual-modality detection of norovirus

Synergistic dual-mode optical platforms are up-and-coming detection tools in the diagnosis and management of infectious diseases. Here, novel dual-modality fluorescence (FL) and surface-enhanced Raman scattering (SERS) techniques have been integrated into a single probe for the rapid and ultrasensitive detection of norovirus (NoV). The developed FL-SER-based biosensor relies on the dual-signal enhancements of newly synthesized sulfur-doped agar-derived carbon dots (S-agCDs). The antigen-antibody immunoreaction results in forming a core-satellite immunocomplex between anti-NoV antibody-conjugated S-agCDs and polydopamine-functionalized magnetic silver nanocubes [poly (dop)-MNPs-Ag NCs]. By deploying an immunomagnetic enrichment protocol and performing the SERS modality on a single-layer graphene substrate, norovirus-like particles (NoV-LPs) were detected across a wide range of 1 fg mL^-1 - 10 ng mL^-1 with an excellent limit of detection of 0.1 fg mL^-1. The combined advantage of the dual-signaling properties of the biosensor was demonstrated using FL confocal imaging for "hotspots" tracking prior to SERS detection of clinical NoV in fecal specimen down to ⁓10 RNA copies mL^-1. The proposed dual-modality biosensor's performance increases the prospect of a rapid and low-cost sensitive NoV detection and surveillance option for public health.

Rapid Detection of Dimethoate in Soybean Samples by Microfluidic Paper Chips Based on Oil-Soluble CdSe Quantum Dots

Given the imperative of monitoring organophosphorus pesticides (OPs) residues in the ecosystem, here a novel, facile and sensitive fluorescence sensor is presented for the rapid detection of dimethoate. In this work, surface molecularly imprinted polymer (SMIP) and microfluidic technology had been introduced to enhance the selectivity and portability of the described methodology. Oil-soluble CdSe quantum dots (QDs) synthesized in a green way were used as fluorescent material for the selective detection of dimethoate on the basis of static quenching and photoinduced electron transfer mechanism. Among many kinds of paper materials, glass fiber paper was used as the novel substrate of paper chip due to low pristine fluorescence and better performance when combining CdSe QDs. In the process of molecular imprinting, the interaction between several functional monomers and dimethoate molecule was investigated and simulated theoretically by software to improve the selectivity of the sensor. Consequently, the fabricated novel detection platform could effectively respond to dimethoate in 10 min with the concentration range of 0.45–80 μmol/L and detection limit of 0.13 μmol/L. The recovery in the spiked experiment soybean sample was in an acceptable range (97.6–104.1%) and the accuracy was verified by gas chromatography-mass spectrometry, which signified the feasibility and potential in food sampling.

Structure and Interface Modification of Carbon Dots for Electrochemical Energy Application

Carbon dots (CDs) as new nanomaterials have attracted much attention in recent years due to their unique characteristics. Notably, structure and interface modification (carbon core, edge, defects, and functional groups) of CDs have been considered as valid methods to regulate their properties, which contain electron transfer effect, electrochemical activity, fluorescence luminescent, and so on. Additionally, CDs with ultrasmall size, excellent dispersibility, high specific surface area, and abundant functional groups can guarantee positive and extraordinary effects in electrical energy storage and conversion. Therefore, CDs are used to couple with other materials by constructing a special interface structure to enhance their properties. Here, diverse structural and interfacial modifications of CDs with various heteroatoms and synergy effects are systematically analyzed. And not only several main syntheses of CDs-based composites (CDs/X) are summarized but also the merit and demerit of CDs/X in electrical energy storage are discussed. Finally, the applications of CDs/X in energy storage devices (supercapacitors, batteries) and electrocatalysts for practical applications are discussed. This review mainly provides a comprehensive summary and future prospect for synthesis, modification, and electrochemical applications of CDs.

Synthesis, characterization, and evaluation of selective molecularly imprinted polymers for the fast determination of synthetic cathinones

As a kind of new psychoactive substance (NPS), synthetic cathinones have drawn great worldwide attention. In this study, molecularly imprinted polymers (MIPs), as adsorbents for the extraction and determination of 4-methyldimethcathinone (4-MDMC), were first synthesized by coprecipitation polymerization. The physicochemical analyses of MIPs were successfully performed by XRD, FTIR, FESEM and TGA techniques. Furthermore, rebinding properties of temperature and pH dependence, and selectivity and reusability tests for MIPs and non-imprinted polymers (NIPs) were performed using an ultraviolet-visible spectrometer (UV-vis). The obtained results indicate that the imprinting efficiency has strong dependence on temperature and pH, and the optimal adsorption for targets is achieved under the condition of 318 K and pH = 6.0. This means that the combination between the polymers and 4-MDMC is a strong spontaneous and endothermic process. Compared with NIPs, MIPs exhibit prominent adsorption capacity (Q_e = 9.77 mg g⁻¹, 318 K). The selectivity coefficients (k) of MIPs for 4-MDMC, methylenedioxypentedrone (βk-MBDP), 4-ethylmethcathinone (4-EMC), methoxetamine (MXE) and tetrahydrofuranylfentanyl (THF-F) were found to be 1.70, 3.49, 7.14 and 5.82, respectively. Moreover, it was found that the adsorption equilibrium was achieved within 30 min. The aim of this work is the simple synthesis of MIPs and the optimal performance of the molecular recognition of 4-MDMC. Moreover, the synthesized MIPs can be easily regenerated and repeatedly used with negligible loss of efficiency (only 9.94% loss after six times adsorption–desorption tests). Satisfying recoveries in the range of 69.3–78.9% indicate that MIPs have good applicability for analyte removal from urine samples. Ultimately, this material shows great promise for the rapid extraction and separation of synthetic cathinones, which are dissolved in the liquid for the field of criminal sciences.

Molecularly imprinted polymers, as an adsorbent for extraction and selective recognition of 4-methyldimethcathinone, were firstly synthesized through coprecipitation polymerization.

[Application of carbon dots in analysis and detection of antibiotics]

Antibiotics have been overused in recent years because of their remarkable curative effect, but this has led to considerable environmental pollution. Therefore, the development of approaches aimed at the effective detection and control of the antibiotics is vital for protecting the environment and human health. Many conventional strategies (such as high-performance liquid chromatography (HPLC), gas chromatography (GC), high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS)) are currently in use for the detection of antibiotics. These strategies have aroused a great deal of interest because of their outstanding features of high efficiency and speed, good reproducibility, automation, etc. However, various problems such as tedious sample pretreatment, low detection sensitivity, and high cost must be overcome for the effective detection of antibiotics in environmental samples. Consequently, it is of great significance to improve the detection sensitivity of antibiotics. The development of new materials combined with the existing detection technology has great potential to improve the detection results for antibiotics. Carbon dots (CDs) are a new class of nanomaterials with particle sizes in the range of 0-10 nm. In addition, CDs have desirable properties such as small particle effect, excellent electrical properties, unique optical properties, and good biocompatibility. Hence, they have been widely utilized for the detection of antibiotics in environmental samples. In this review, the application of CDs combined with sensors and chromatographic technology for the detection of antibiotics in the last five years are summarized. The development prospects of CD-based materials and their application to the analysis and detection of antibiotics are presented. In this review, many new sensors (CDs combined with molecularly imprinted polymer sensors, aptamer sensors, electrochemiluminescence sensors, fluorescence sensors, and electrochemical sensors) combined with CD-based materials and their use in the detection of antibiotics are summarized. Furthermore, advanced analysis methods such as ratiometric sensor and array sensor methods are reviewed. The novel analysis methods provide a new direction toward the detection of antibiotics by CDs combined with a sensor. Moreover, CD-based chromatographic stationary phases for the separation of antibiotics are also summarized in this manuscript. It is reported that the detection sensitivity for antibiotics can be greatly improved by the combination of CDs and a sensor. Nevertheless, a literature survey reveals that the detection of antibiotics in complex environmental samples is confronted with numerous challenges, including the fabrication of highly sensitive sensors in combination with CDs. Furthermore, the development of novel high-performance materials is of imperative. In addition, it is important to develop new methods for effective data processing. The separation of antibiotics with CDs as the chromatographic stationary phases is in the preliminary stage, and the separation mechanism remains to be clarified. In conclusion, there are still many problems to be overcome when using CDs as novel materials for the detection of antibiotics in environmental samples. Nowadays, CD-based materials are being intensively studied, and various analytical detection technologies are being rapidly developed. In the future, CD-based materials are expected to play an important role in the detection of antibiotics and other environmental pollutants.

Green Aspects in Molecularly Imprinted Polymers by Biomass Waste Utilization

Molecular Imprinting Polymer (MIP) technology is a technique to design artificial receptors with a predetermined selectivity and specificity for a given analyte, which can be used as ideal materials in various application fields. In the last decades, MIP technology has gained much attention from the scientific world as summarized in several reviews with this topic. Furthermore, green synthesis in chemistry is nowadays one of the essential aspects to be taken into consideration in the development of novel products. In accordance with this feature, the MIP community more recently devoted considerable research and development efforts on eco-friendly processes. Among other materials, biomass waste, which is a big environmental problem because most of it is discarded, can represent a potential sustainable alternative source in green synthesis, which can be addressed to the production of high-value carbon-based materials with different applications. This review aims to focus and explore in detail the recent progress in the use of biomass waste for imprinted polymers preparation. Specifically, different types of biomass waste in MIP preparation will be exploited: chitosan, cellulose, activated carbon, carbon dots, cyclodextrins, and waste extracts, describing the approaches used in the synthesis of MIPs combined with biomass waste derivatives.

A novel small molecular liquid crystal catalytic amplification-nanogold SPR aptamer absorption assay for trace oxytetracycline

Liquid crystals (LCs) have been applied for a long time in the field of analytical chemistry. To date, there are no reports about utilization of LCs as the catalyst to amplification analytical signal. In this article, three small molecules LCs in water aqueous solutions were characterized using molecular spectra and particle size analysis. The characterization indicated that there are nanoparticles in the system. Among the them, 4-heptylbenzoic acid (HPB) exhibits the most sensitive performance in the analytical system based on the reduction of HAuCl₄ to gold nanoparticles (AuNPs) by NaH₂PO₂ by the spectrophotometric slope evaluation procedure. As the concentration of LCs catalyst increases, the AuNPs surface plasmon resonance (SPR) absorption peak at 550 nm increases linearly, that can be utilized to amply the absorption signal. Based on the LCs catalytic amplification reaction and immunoreaction, a new SPR spectrophotometric analysis method was developed for the label-free detection of oxytetracycline, with a detection limit of 0.50 ng/mL. The method was also successfully applied for the detection of oxytetracycline-spiked environmental water samples to demonstrate its practical usefulness.

A carbon dot-based fluorometric probe for oxytetracycline detection utilizing a Förster resonance energy transfer mechanism

A carbon dot (CD)-based fluorometric probe for oxytetracycline (OTC) detection utilizing a Förster resonance energy transfer (FRET) mechanism was firstly developed. Upon addition of OTC, the blue fluorescence of the CDs peaked at 405 nm was quickly quenched, with a new fluorescence peaked at 505 nm attributed to OTC was observed within 30 s. A visual fluorescent color change of the CDs solution from blue to green was discerned under a 365 nm UV light irradiation. The CDs displayed a high sensitivity and selectivity toward OTC with a low detection limit of 0.41 μM. Furthermore, the probe was applied to detect OTC in water, milk, and pork samples with a satisfied recovery.

Recent advances in the construction and analytical applications of carbon dots-based optical nanoassembly

Recently, more and more attention has been focused on the construction and analytical applications of optical nanoassembly through combining carbon dots (CDs) with various other functional nanomaterials. The rational design and manufacture of CDs-based optical nanoassembly will be critical to meeting the needs of analytical science. The last decade has witnessed the immense potential of CDs-based optical nanoassembly in multiple sensing applications owing to their controlled optical properties, adjustable surface chemistry and microscopic morphology. This feature article collects the recent advances in the research and development of CDs-based optical nanoassembly and their applications in analytical sensors, aiming to provide vital insights and suggestions to inspire their broad sensing applications.

Novel methods for the rapid detection of trace tetracyclines based on the fluorescence behaviours of Maillard reaction fluorescent nanoparticles

The Maillard reaction and its fluorescent products have attracted widespread attention in the field of food safety and biology. Herein, the novel Maillard reaction fluorescent nanoparticles (MRFNs) as a fluorescent probe were synthesized via a “green” method with simple technical processes. In addition, the effects of tetracycline (TC) and chlorotetracycline (CTC) representing certain properties of tetracyclines (TCs) on the fluorescence behaviour of MRFNs were studied, respectively. The present study showed that the fluorescence intensity of MRFNs greatly enhanced with a linear increase in the CTC concentration. However, with the gradual increase in the TC concentration, the intensity of MRFNs tended to significantly decrease linearly. Based on this, novel fluorescence analysis methods for the simple and rapid detection of TC and CTC in water bodies were established, respectively. Significantly, the proposed detection methods were successfully adopted for detecting TC and CTC in some environmental water samples. Besides, the possible mechanisms for TC-induced fluorescence quenching and CTC-induced fluorescence enhancement of MRFNs were also discussed, respectively.

The Maillard reaction and its fluorescent products have attracted widespread attention in the field of food safety and biology.

Green synthesis of water-soluble fluorescent carbon dots from rosemary leaves: Applications in food storage capacity, fingerprint detection, and antibacterial activity

Blue fluorescent carbon dots are synthesized via a one-step hydrothermal method using rosemary leaves as a carbon source. The obtained carbon dots are characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-Vis, FTIR, and fluorescence spectrometry. The results show that carbon dots gave a maximum emission peak at 422 nm when excited at 332 nm. The average particle diameter of the synthesized spherical carbon dots is found to be 16.13 nm with a 4.6-nm standard deviation. The diameters of the produced carbon dots vary, as is evident from standard deviation heights, resulting in multicolor emission spectra. The fruit storage experiment is carried out by investigating the qualitative antioxidant ability of the produced carbon dots. The results obtained for polyvinyl alcohol–carbon dot–coated samples differ remarkably compared to polyvinyl alcohol–coated samples only. The polyvinyl alcohol–carbon dot composition is used in latent fingerprint detection applications. In analyses made on a glass surface, fingerprints cannot be monitored on the glass surface with the polyvinyl alcohol layer under ultraviolet light, while they are observed on the surface covered with the polyvinyl alcohol–carbon dot composition. Moreover, biological activity against Gram-positive, Gram-negative, and yeast strains are investigated.