Effect of medium viscosity on rheological characteristics of magnetite-based magnetorheological fluids

Mechanism analysis of the carrier viscosity effect on shear stress of magnetorheological fluids

Shear stress is an important index to evaluate the rheological behavior of magnetorheological fluids (MRFs), which is not only related to the properties of ferromagnetic particles, but also the viscosity of the carrier. However, the research related to the carrier viscosity is quite lacking, and the mechanism of its effect on shear stress is still unclear. In this work, the carrier viscosity effect on the microstructure of MRFs under shearing was investigated via numerical simulations, and the relationship between chain inclination and carrier viscosity was presented for the first time. It was found that the deflection angle of the chain increases with the increase of carrier viscosity. Based on the simulation results, the relationship between the shear resistance induced by the magnetic field and the deflection angle of the chain was studied. Finally, a constitutive model incorporating the mechanism of the viscosity effect on shear stress was proposed, and the calculated results agreed well with the experimental data. This work provides new insights into the effect of carrier viscosity and can help us to better understand the corresponding microscopic mechanism.

Dual Electrorheological and Magnetorheological Behaviors of Poly(N-methyl aniline) Coated ZnFe2O4 Composite Particles

Magnetic/conducting polymeric hybrid core-shell typed zinc ferrite (ZnFe₂O₄)/poly(N-methyl aniline) (PMA) particles were fabricated and adopted as electrorheological (ER) and magnetorheological (MR) fluids, and their rheological properties were examined. Solvo-thermally synthesized ZnFe₂O₄ was coated with a conducting PMA through chemical oxidation polymerization. The size, shape, and chemical composition of the final core-shell shaped particles were scrutinized by scanning electron microscopy, transmission electron microscopy, and Fourier transform-infrared spectroscopy. The crystal faces of the particles before and after coating with PMA were analyzed by X-ray diffraction. The ZnFe₂O₄/PMA products were suspended in silicone oil to investigate the rheological response to electro- or magnetic stimuli using a rotating rheometer. The shear stresses were analyzed using the CCJ equation. The dynamic yield stress curve was suitable for the conductivity mechanism with a slope of 1.5. When magnetic fields of various intensities were applied, the flow curve was analyzed using the Hershel–Bulkley equation, and the yield stresses had a slope of 1.5. Optical microscopy further showed that the particles dispersed in insulating medium form chain structures under electric and magnetic fields. Via this core-shell fabrication process, not only spherical conducting particles were obtained but also their dual ER and MR responses were demonstrated for their wide potential applications.

Molecular Dynamics Simulations and Experimental Studies of the Microstructure and Mechanical Properties of a Silicone Oil/Functionalized Ionic Liquid-Based Magnetorheological Fluid

Magnetorheological (MR) fluids are smart materials that show enormous potential in vibration control, mechanical engineering, etc. However, the effects of the solid-liquid interface strength and the interaction strength between carrier liquid molecules on the mechanical properties and sedimentation stability of MR fluids have always been unresolved issues. This work presents a new type of MR fluid that has a novel carrier liquid, i.e., silicone oil (SO) mixed with a hydroxyl-functionalized ionic liquid (IL-OH). An all-atomic Fe/SO/IL-OH interface model for studying the relationship between mechanical properties and interface strength and intermolecular interactions is established. On the basis of simulation results and theoretical analyses, the mechanical properties and sedimentation stability of the SO/IL-OH-based MR fluids are thoroughly investigated by experiments. The results show that functional ionic liquids significantly improve the mechanical properties and sedimentation stability of MR fluids. These results are essentially attributed to the stronger solid-liquid interface strength, van der Waals forces, and hydrogen bonds between the silicone oil and the functional ionic liquid. The explicit results not only help elucidate the numerous phenomena involved in the research process for MR fluids at the atomic scale but also provide insightful information on the fabrication of high-performance MR fluids.

Core-Shell Structured Magnetite-Poly(diphenylamine) Microspheres and Their Tunable Dual Response under Magnetic and Electric Fields

Core-shell type poly(diphenylamine)-coated magnetite (Fe₃O₄-PDPA) microspheres were designed and adopted as a novel actively tunable smart material which is responsive under both electric and magnetic fields. Their morphology, chemical structure, crystalline structure, and thermal properties were characterized using scanning electron microscopy, transmission electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction, and a thermal gravimetric analyzer. Their magnetic and dielectric properties were determined using vibrating-sample magnetometer and an LCR meter, respectively. They were dispersed in silicone oil and their electrorheological (ER) and magnetorheological (MR) responses under the electric and magnetic fields, respectively, were examined. The formation of chain structure of Fe₃O₄-PDPA based E/MR fluid under the application of electric field or magnetic field was observed by an optical microscopy and the sedimentation stability was observed by a Turbiscan optical analyzer system. It was observed that the yield stress, ER efficiency, and leakage current density increased with an increase in the particle concentration, while the slope of the electric field-dependent yield stress decreased. Several models such as the Bingham model, Herschel-Bulkley model, and Cho-Choi-Jhon equations were used to describe the shear stress curves of the ER fluid; the curves fitted well. For the dielectric properties, the two types of ER fluids tested displayed the same relaxation time and distribution; however, the one with the higher concentration had a higher dielectric constant and polarizability. The Fe₃O₄-PDPA based MR fluid (10 vol %) exhibited typical MR properties. In addition, the Herschel-Bulkley model matched well with the shear stress curves under a magnetic field.