Ag-doped graphitic carbon nitride photocatalyst with remarkably enhanced photocatalytic activity towards antibiotic in hospital wastewater under solar light

Integrating K and P co-doped g-C3N4 with ZnFe2O4 and graphene oxide for S-scheme-based enhanced absorption coupled photocatalytic real wastewater treatment

Recently, there has been a significant increase in the interest of using photocatalysis for environmental clean-up applications. In this research, potassium, and phosphorus co-doped graphitic carbon nitride (KPCN) photocatalyst modified with graphene oxide (GO) and heterostructured with ZnFe₂O₄ was synthesized via the hydrothermal method (KPCN/GO/ZnFe₂O₄). The photoactivity of KPCN/GO/ZnFe₂O₄ photocatalyst was examined for the photocatalytic degradation of target pollutants such as methylene blue (MB) dye, rhodamine B (RhB) dye, and tetracycline (TC) antibiotic. Furthermore, the chemical oxygen demand (COD) removal efficiency for real wastewater was determined to explore the practical application of KPCN/GO/ZnFe₂O₄ photocatalyst. The degradation efficiencies of bare graphitic carbon nitride, KPCN, KPCN/GO, and KPCN/GO/ZnFe₂O₄ photocatalysts for tetracycline antibiotics were 30%, 42%, 57%, and 87% within 60 min, respectively. Moreover, KPCN/GO/ZnFe₂O₄ photocatalyst showed 71% COD removal efficiency within 240 min. The ^•OH and ^•O₂^- were the major reactive species in the photocatalytic process. Results showed that the degradation efficiencies of graphitic carbon nitride were greatly enhanced upon doping and further improved with the addition of GO and ZnFe₂O₄. Doping improved light harvesting, GO enhanced the adsorption ability and heterojunction with ZnFe₂O₄ enhanced the charge separation as well as the reusability of synthesized KPCN/GO/ZnFe₂O₄ photocatalyst.

Doped graphitic carbon nitride (g-C3N4) catalysts for efficient photodegradation of tetracycline antibiotics in aquatic environments

Tetracyclines (TCs) antibiotics are very common and often used in both human and veterinary medicines. More than 75% of TCs are excreted in an active condition and released into the environment, posing a risk to the ecosystem and human health. Residual antibiotics are in global water bodies, causing antibiotic resistance and genotoxicity in humans and aquatic organisms. The ever-increasing number of multi-resistant bacteria caused by the widespread use of antibiotics in the environment has sparked a renewed interest in developing more sustainable antibiotic degradation processes. In this regard, photodegradation technique provides a promising solution to resolve this growing issue, paving the way for complete antibiotic degradation with the generation of non-toxic by-products. As a fascinating activity towards visible light range shown by semiconductor, graphitic carbon nitride (g-C₃N₄) has a medium bandgap, non-toxicity, chemically stable complex, and thermally great strength. Recent studies have concentrated on the performance of g-C₃N₄ as a photocatalyst for treating wastewater. Pure g-C₃N₄ exhibits limited photocatalytic activity due to insufficient sunlight usage, small surface area, and a high rate of recombination of electron and hole ([Formula: see text] & [Formula: see text]) pairs created in photocatalytic activity. Doping of g-C₃N₄ is a very effective method for improving the activity as element doped g-C₃N₄ shows excellent bandgap and electronic structure. Doping significantly broadens the light-responsive range and reduces recombination of e^- & h⁺ pairs. Under above context, this review provides a systematic and comprehensive outlook of designing doped g-C₃N₄ as well as efficiency for TCs degradation in aquatic environment.

Noble metal-free doped graphitic carbon nitride (g-C3N4) for efficient photodegradation of antibiotics: progress, limitations, and future directions

Graphitic carbon nitride (g-C₃N₄) is well recognised as one of the most promising materials for photocatalytic activities such as environmental remediation via organic pollution elimination. New methods of nanoscale structure design introduce tunable electrical characteristics and broaden their use as visible light-induced photocatalysts. This paper summarises the most recent developments in the design of g-C₃N₄ with element doping. Various methods of introducing metal and nonmetal elements into g-C₃N₄ have been investigated in order to simultaneously tune the material's textural and electronic properties to improve its response to the entire visible light range, facilitate charge separation, and extend charge carrier lifetime. The degradation of antibiotics is one of the application domains of such doped g-C₃N₄. We expect that this research will provide fresh insights into clear design methods for efficient photocatalysts that will solve environmental challenges in a sustainable manner. Finally, the problems and potential associated with g-C₃N₄-based nanomaterials are discussed. This review is expected to encourage the ongoing development of g-C₃N₄-based materials for greater efficiency in photocatalytic antibiotic degradation.

Emerging and Promising Multifunctional Nanomaterial for Textile Application Based on Graphitic Carbon Nitride Heterostructure Nanocomposites

Nanocomposites constructed with heterostructures of graphitic carbon nitride (g-C₃N₄), silver (Ag), and titanium dioxide (TiO₂) have emerged as promising nanomaterials for various environmental, energy, and clinical applications. In the field of textiles, Ag and TiO₂ are already recognized as essential nanomaterials for the chemical surface and bulk modification of various textile materials, but the application of composites with g-C₃N₄ as a green and visible-light-active photocatalyst has not yet been fully established. This review provides an overview of the construction of Ag/g-C₃N₄, TiO₂/g-C₃N₄, and Ag/TiO₂/g-C₃N₄ heterostructures; the mechanisms of their photocatalytic activity; and the application of photocatalytic textile platforms in the photochemical activation of organic synthesis, energy generation, and the removal of various organic pollutants from water. Future prospects for the functionalization of textiles using g-C₃N₄-containing heterostructures with Ag and TiO₂ are highlighted.

Semiconductors Application Forms and Doping Benefits to Wastewater Treatment: A Comparison of TiO2, WO3, and g-C3N4

Photocatalysis has been vastly applied for the removal of contaminants of emerging concern (CECs) and other micropollutants, with the aim of future water reclamation. As a process based upon photon irradiation, materials that may be activated through natural light sources are highly pursued, to facilitate their application and reduce costs. TiO2 is a reference material, and it has been greatly optimized. However, in its typical configuration, it is known to be mainly active under ultraviolet radiation. Thus, multiple alternative visible light driven (VLD) materials have been intensively studied recently. WO3 and g-C3N4 are currently attractive VLD catalysts, with WO3 possessing similarities with TiO2 as a metal oxide, allowing correlations between the knowledge regarding the reference catalyst, and g-C3N4 having an interesting and distinct non-metallic polymeric structure with the benefit of easy production. In this review, recent developments towards CECs degradation in TiO2 based photocatalysis are discussed, as reference catalyst, alongside the selected alternative materials, WO3 and g-C3N4. The aim here is to evaluate the different techniques more commonly explored to enhance catalyst photo-activity, specifically doping with multiple elements and the formation of composite materials. Moreover, the possible combination of photocatalysis and ozonation is also explored, as a promising route to potentialize their individual efficiencies and overcome typical drawbacks.

Improved photodegradation of antibiotics pollutants in wastewaters by advanced oxidation process based on Ni-doped TiO2

The number of antibiotic compounds in wastewaters has been growing globally due to the covid-19 problem. Using antibiotics to treat the patients would produce larger amounts of these compounds into the environment with negative impacts. Hence, finding out the method for the elimination of toxic organic pollutants as well as antibiotics in water is urgent (In this study, the treatment of antibiotic pollutants including cefalexin (CF) and tetracycline (TC) was investigated by applying the advanced oxidation process based on Ni-doped TiO₂ (Ni-TiO₂). The characterizations technologies such as XRD, XPS, UV-vis, PL, and PC indicated that Ni doping would improve the photocatalytic performance of TiO₂. In the photodegradation experiments, the Ni-TiO₂ possessed high photocatalytic degradation efficiencies with 93.6% for CF and 82.5% for TC. Besides, the removal rates of antibiotics after five cycles are higher than 75%, implying excellent stability of Ni-TiO₂ photocatalyst. The result from the treatment of wastewater samples revealed that the Ni-TiO₂ photocatalytic had good performance for removal of CF and TC at a high level of 88.6 and 80.2%, respectively.

Visible-light photocatalysis of Ag-doped graphitic carbon nitride for photodegradation of micropollutants in wastewater

This work reports on graphitic carbon nitride (C₃N₄) modified with silver to investigate its visible-light-driven photocatalysis for decomposition of micropollutants in wastewater. Various characterization methods were conducted to examine the physico-chemical properties of Ag-doped C₃N₄ (Ag-C₃N₄) photocatalyst. The results from structural, morphological, and surface chemical analysis indicated that C₃N₄ was successfully doped with Ag. Photoluminescence and transient photocurrent density studies revealed that the recombination rate of electron-hole pairs was reduced, leading to the enhancement of photocatalytic activities of the photocatalyst. Ag-C₃N₄ showed high photocatalytic performance for photodegradation of our target micropollutant, bisphenol A (BA). It could completely remove BA in 1 h with kinetic constant 6.2 times higher than that of the undoped C₃N₄ photocatalyst. Recycling test and the assessment of the photocatalyst in wastewater further confirmed the excellent stability and applicability of the Ag-C₃N₄ photocatalyst. This work could provide a new solution to the practical application of photocatalyts for the degradation of micropollutants in wastewater.

Ultrasound-Assisted Hydrothermal Synthesis of SrSnO3/g-C3N4 Heterojunction with Enhanced Photocatalytic Performance for Ciprofloxacin under Visible Light

In this work, an SrSnO3/g-C3N4 heterojunction with different dosage of SrSnO3 was fabricated by an ultrasound-assisted hydrothermal approach and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectra (UV-Vis DRS), and photoluminescence spectroscopy (PL). Ciprofloxacin was adopted to assess the degradation performance, and the sample combined with 40% SrSnO3 eliminated 93% of ciprofloxacin (20 mg/L) within 3 h under visible light, which is 6.6 and 1.7 times greater than for SrSnO3 and g-C3N4, respectively. Furthermore, 85% CIP was extinguished after five cycles of a photocatalytic process. Ultimately, a possible photocatalytic mechanism was dissected.

Hospital Wastewater-Source of Specific Micropollutants, Antibiotic-Resistant Microorganisms, Viruses, and Their Elimination

Municipal wastewaters can generally provide real-time information on drug consumption, the incidence of specific diseases, or establish exposure to certain agents and determine some lifestyle consequences. From this point of view, wastewater-based epidemiology represents a modern diagnostic tool for describing the health status of a certain part of the population in a specific region. Hospital wastewater is a complex mixture of pharmaceuticals, illegal drugs, and their metabolites as well as different susceptible and antibiotic-resistant microorganisms, including viruses. Many studies pointed out that wastewater from healthcare facilities (including hospital wastewater), significantly contributes to higher loads of micropollutants, including bacteria and viruses, in municipal wastewater. In addition, such a mixture can increase the selective pressure on bacteria, thus contributing to the development and dissemination of antimicrobial resistance. Because many pharmaceuticals, drugs, and microorganisms can pass through wastewater treatment plants without any significant change in their structure and toxicity and enter surface waters, treatment technologies need to be improved. This short review summarizes the recent knowledge from studies on micropollutants, pathogens, antibiotic-resistant bacteria, and viruses (including SARS-CoV-2) in wastewater from healthcare facilities. It also proposes several possibilities for improving the wastewater treatment process in terms of efficiency as well as economy.

Carbon nitride-based photocatalysts for the mitigation of water pollution engendered by pharmaceutical compounds

In recent decades, the destructive impact of active pharmaceutical ingredients (API) present in surface and drinking water on aquatic and terrestrial life forms becomes a major concern of researchers. API like diclofenac (DCF), carbamazepine (CBZ), tetracycline (TC), and sulfamethoxazole (SME) found in water bodies cause antimicrobial resistance and are potent carcinogens and endocrine disruptors. Conventional wastewater treatment methods possess some drawbacks and were found to be insufficient for the effective removal of APIs. Visible light-assisted semiconductor photocatalysis has become an alternative choice for tackling this worse scenario. Graphitic carbon nitride, a metal-free visible light active semiconductor photocatalyst is an emerging hotspot nanomaterial whose practical utility in water purification is widely recognized. This review comes up with an insightful outlook on the panorama of recent progress in the field of g-C₃N₄-assisted photocatalytic systems for the eradication of APIs. In addition, the review summarizes various strategies adopted for the broad-spectrum utilization of visible light and the enhancement of charge separation of pristine g-C₃N₄. The mechanistic pathways followed by different pharmaceuticals during their photocatalytic degradation process were also briefly discussed.

An overview of homogeneous and heterogeneous photocatalysis applications for the removal of pharmaceutical compounds from real or synthetic hospital wastewaters under lab or pilot scale

The last few decades, Pharmaceutical Active Compounds (PhACs) have been considered as emerging contaminants due to their continuous release and persistence to aquatic environment even at low concentrations. A growing number of research articles have shown the occurrence of numerous PhACs in various wastewater treatment plant influents, hospital effluents, and surface waters all over the world. The rising concern regarding PhACs, which present high recalcitrance towards conventional treatment methods, has provoked extensive research in the field of their effective remediation. This review provides a comprehensive assessment of homogeneous and heterogeneous photocatalytic applications for the removal of PhACs, from real or artificial hospital wastewater effluents. These two representative advanced oxidation processes (AOPs) are assessed in terms of their efficiency to remove PhACs, reduce the COD and toxicity as well as increase the biodegradability of the effluent. Simultaneously with their efficiency the operational costs of the processes are considered. Their potential combination with other processes is critically discussed, as this option seems to enhance the treatment efficiency and simultaneously overcome the limitations of each individual process. Moreover, the type of reactors as well as the main parameters that should be considered for the design and the development of photoreactors for wastewater treatment are reviewed. Finally, based on the literature survey, indications for future work are provided.

Review on the Visible Light Photocatalysis for the Decomposition of Ciprofloxacin, Norfloxacin, Tetracyclines, and Sulfonamides Antibiotics in Wastewater

Antibiotics are chemical compounds that are used to kill or prevent bacterial growth. They are used in different fields, such as the medical field, agriculture, and veterinary. Antibiotics end up in wastewater, which causes the threat of developing antibacterial resistance; therefore, antibiotics must be eliminated from wastewater. Different conventional elimination methods are limited due to their high cost and effort, or incomplete elimination. Semiconductor-assisted photocatalysis arises as an effective elimination method for different organic wastes including antibiotics. A variety of semiconducting materials were tested to eliminate antibiotics from wastewater; nevertheless, research is still ongoing due to some limitations. This review summarizes the recent studies regarding semiconducting material modifications for antibiotic degradation using visible light irradiation.

Emerging pollutants-Part II: Treatment

Emerging pollutants (EPs) refer to a class of pollutants, which are emerging in the environment or recently attracted attention. EPs mainly include pharmaceutical and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and antibiotic resistance genes (ARGs). EPs have potential threats to human health and ecological environment. In recent years, the continuous detections of EPs in surface and ground water have brought huge challenges to water treatment and also made the treatment of EPs become an international research hotspot. This paper summarizes some research results on EPs treatment published in 2019. This paper may be helpful to understand the current situations and development trends of EP treatment technologies.

Potential Application of Gold Nanospheres as a Surface Plasmon Resonance Based Sensor for In-Situ Detection of Residual Fungicides

It is essential to develop a simple and sensitive method to rapidly detect residual fungicides in agricultural products to protect human health. So far, little studies have been reported on potential application of gold nanospheres (AuNSps) as a surface plasmon resonance based sensor for in-situ detection of residual fungicides. Therefore, in this study, we investigated the potential application of AuNSps as a surface plasmon resonance based sensor for in-situ detection of fungicides. AuNSps were successfully synthesized via a seed-mediated method with some modifications. Firstly, gold nanoseeds were made during the reduction of chloroauric acid by trisodium citrate dihydrate (TSC). Then, AuNSps were grown from the seeds by using HAuCl₄, TSC and EDTA. AuNSps were subsequently dropped on a glass substrate before covered by thiophanate methyl, a broad-spectrum systemic fungicide. The AuNSps coated glass substrate was subsequently dried in the air for further surface-enhanced Raman spectroscopy (SERS) measurements. Optical properties, shape and size of AuNSps were confirmed by UV-vis spectroscopy, XRD, SEM-EDX and TEM. The results showed that AuNSps were successfully synthesized with the size of 53 nm, and their resonance peak was located at 560 nm. The Raman signal intensity of thiophanate methyl covered on AuNSps is higher than that without AuNSps, indicating SERS effects of AuNSps deposited glass substrate.