A novel high-performance electrocatalytic determination platform for voltammetric sensing of eugenol in acidic media using pyrochlore structured lanthanum stannate nanoparticles

An innovative experimental and mathematical approach in electrochemical sensing for mapping a drug sensor landscape

Our study delves into the examination of an electrochemical sensor through both experimentation and mathematical analysis. The sensor demonstrates the ability to identify a specific antipsychotic medication, namely Chlorpromazine Hydrochloride (CPH), even at incredibly low concentrations, reaching the picomolar level. The identification process relies on the utilization of a Glassy Carbon Electrode (GCE) that has been modified with a ceria-doped zirconia (CeO2/ZrO2) nanocomposite. The nanocomposite was synthesized using the co-precipitation technique and extensively characterized through various analytical methods. It is crucial to detect the presence of CPH as an overdose can result in hyperactivity and severe bipolar disorders among both children and adults. The average size of the nanocomposite was estimated to be 10 nm. The electrode surface area after CeO2/ZrO2 modification of the GCE was found to be 0.059 cm2, which was significantly higher than the electrode surface area of the bare GCE (0.0307 cm2). The limit of detection and limit of quantification for CPH were calculated to be 99.3 pM and 3.010 nM, respectively, with the linear dynamic range of CPH detection found to be between 0.10 and 1.90 μM. The modified sensor electrode was tested on human urine samples with good recoveries and exhibited high selectivity, repeatability, reproducibility, and long-term stability. The experimental voltammograms and the simulated stochastic voltammograms exhibited a fair amount of agreement. Examination of the experimental findings alongside analytical and numerical solutions enables a comprehensive analysis of the factors influencing the outcome of electrochemical measurements. The precise findings can be leveraged for the development of efficient sensing devices for medical diagnostics and environmental monitoring.

A DNA biosensor strategy in monitoring of Vinorelbine breast cancer drug using catalytic effect of Pt-Pd-ZnO/SWCNTs

The present research work introduced a new electrocatalyst (Pt-Pd-ZnO/SWCNTs in this case) to the fabrication of a powerful DNA biosensor in the monitoring of Vinorelbine anticancer drug. The characterization information confirms the high purity of Pt-Pd-ZnO/SWCNTs nanocomposite and an intercalation reaction between Vinorelbine anticancer drug and the guanine base of DNA in an aqueous solution. The reducing signal of DNA after interaction with Vinorelbine drug showed a linear analytical range of 0.1-120 μM with a detection limit of 0.05 μM. The biosensor was fabricated by layer-by-layer modification of glassy carbon electrode with ds-DNA and Pt-Pd-ZnO/SWCNTs nanocomposite and used as the working electrode to sensing of vinorelbine drug in pharmaceutical and other real samples with acceptable recovery data. The preferential intercalation mode for the binding of vinorelbine anticancer drug into the ds-DNA receptor is clarified using the molecular docking study.

Developing an exclusive sensor based on molecularly imprinted polymer/Multi-walled carbon nanotubes/Fe3O4@Au nanocomposite for the selective determination of an anti-cancer drug imatinib

Determination of pharmaceuticals especially anticancer drugs is one of the important issues in environmental and medical investigation and creating good information about human health. The presence sturdy introducing an electroanalytical sensor based on molecularly imprinted polymer (MIP)/Multi-walled carbon nanotubes (MWCNTs)/Au@Fe3O4 nanoparticles modified carbon paste electrode (PE) to determine imatinib (IMA). The MIP/MWCNTs/Au@Fe3O4/PE showed catalytic activity and also a sensitive strategy to sensing IMA in the concentration range 1-1000 μM with a limit of detection of 0.013 μM. The MIP/MWCNTs/Au@Fe3O4/PE has shown interesting results in the analysis of IMA in real samples, and the interference investigations results show the high selectivity of the MIP/MWCNTs/Au@Fe3O4/PE in the monitoring of IMA in complex fluids such as tablet and blood serum and results approved by F-test and t-test as statistical methods.

Smart and sensitive nanomaterial-based electrochemical sensor for the determination of a poly (ADP-ribose) polymerase (PARP) inhibitor anticancer agent

In this research, we propose a novel approach for constructing a sensitive and selective electrochemical sensor utilizing high-quality multi-walled carbon nanotubes functionalized with amino groups (MWCNT-NH2) for the detection of Talazoparib (TLZ), a poly (ADP-ribose) polymerase (PARP) enzyme inhibitor, in real samples. The MWCNT-NH2-based sensor exhibited remarkable performance characteristics, including excellent repeatability, reproducibility, and high selectivity against various interferences. Under optimized conditions, the sensor demonstrated a wide linear concentration range of 1.0-5.0 μM, with a low limit of detection (LOD) of 0.201 μM. Substantiated by rigorous analysis of pharmaceutical and biological matrices, our methodology emerges as a paragon of reliability, boasting recovery rates within the satisfactory bracket of 96.38-105.25%. The successful application of the MWCNT-NH2-based sensor in practical sample analysis highlights its potential for implementation in clinical and pharmaceutical settings. This research not only advances the application of MWCNT-NH2 in electrochemical sensing but also opens new avenues for the development and monitoring of innovative anticancer treatments. The insights gained from our study have far-reaching implications, pointing toward a future where precision and innovation converge to improve patient care and treatment outcomes.

Cu-BTC MOF/ionic liquid nanocomposite as novel catalyst to electrochemical monitoring of digoxin in pharmaceutical and environmental samples

There is no effective environmental treatment strategy that does not include monitoring for pharmaceutical compounds in environmental and biological fluids. The widespread presence of pharmaceutical-based pollutants in water sources is a significant public health concern. The treatment process relies heavily on maintaining a stable digoxin concentration in bodily fluids. Finding the correct dose for this medication appears to be crucial. In this research, an easy and high sensibility electrochemical sensor was developed to determine digoxin based on a paste electrode (CPE) that was modified with Cu-BTC MOF and ion liquid ((IL); 1-Methyl-3-Butyl-imidazolinium bromide in this case) using voltammetric methods in 0.1 M phosphate buffer solution (PBS) at pH 5.0. The sensor's selectivity was significantly increased by using Cu-BTC MOF and IL to detect digoxin. The characteristics of the electrode modifiers were evaluated by SEM, XRD and EDS techniques. The LDR was found to be 0.1-40 μM and the LOD of 0.08 μM, respectively.

The Fabrication of a La2Sn2O7/f-HNT Composite for Non-Enzymatic Electrochemical Detection of 3-Nitro-l-tyrosine in Biological Samples

Reactive oxygen and nitrogen species (RONS), including 3-nitro-l-tyrosine, play a dual role in human health, inducing oxidative damage and regulating cellular functions. Early and accurate detection of such molecules, such as L-tyrosine in urine, can serve as critical biomarkers for various cancers. In this study, we aimed to enhance the electrochemical detection of these molecules through the synthesis of La₂Sn₂O₇/f-HNT nanocomposites via a simple hydrothermal method. Detailed structural and morphological characterizations confirmed successful synthesis, consistent with our expected outcomes. The synthesized nanocomposites were utilized as nanocatalysts in electrochemical sensors, showing a notable limit of the detection of 0.012 µM for the real-time detection of 3-nitro-l-tyrosine. These findings underscore the potential of nanomaterial-based sensors in advancing early disease detection with high sensitivity, furthering our understanding of cellular oxidative processes.

Rapid detection of eugenol in perch utilizing electrochemical method by transition metal substituted polyoxometalates

Food safety concerns caused by the application of spice allergens to fish anaesthesia. In this paper, a chitosan-reduced graphene oxide/polyoxometalates/poly-l-lysine (CS-rGO/P₂Mo₁₇Cu/PLL) modified electrode was constructed by electrodeposition and successfully applied to the quantitative analysis of eugenol (EU). The detection limit was 0.4490 μM in the linear range of 2x10^-6 M to 1.4x10^-5 M. It was applied to the determination of EU residues in kidney, liver and meat tissues of perch with recoveries ranging from 85.43 to 93.60%. Besides, the electrodes demonstrate high stability (2.56% drop in current value after 70 days at room temperature), high reproducibility (RSD of 4.87% for 6 parallel electrodes) and extremely fast response time. This study provided a new material for the electrochemical detection of EU.

Lanthanum tin oxide-modified sensor electrode for the rapid detection of environmentally hazardous insecticide carbaryl in soil, water, and vegetable samples

The growing population and global food demands have encouraged the use of pesticides to increase agricultural yields; however, the irrational use of pesticides threatens human health and the environment. Carbaryl (CRBL) is the most widespread insecticide and severely affects soil, water systems, and human health. Thus, it is crucial to monitor CRBL residues in the environment and vegetable samples. This study reports the rapid and sensitive electrochemical detection of CRBL based on a pyrochlore-type lanthanum tin oxide (LSO) nanoparticles (NPs)-modified screen-printed carbon electrode (SPCE). A low-temperature hydrothermal method was employed to prepare the LSO NPs. The structural properties of the LSO NPs were characterized by X-ray diffraction, Raman, and X-ray photoelectron spectroscopy analyses. The LSO NPs/SPCE demonstrated good electroanalytical performance for CRBL detection, with a low detection limit of 0.4 nM (0.08 µg/L) and a sensitivity of 1.05 µA/(µM cm²). Furthermore, the LSO NPs/SPCE exhibited high selectivity among highly interfering carbamate and organophosphorus pesticides, which share similar mechanisms of action. Additionally, the LSO NPs/SPCE sensor achieved > 90% recovery for the detection of CRBL in soil, water, and vegetable samples, thus verifying its suitability for the rapid detection of CRBL.