Environmental fate of aquatic pollutants and their mitigation by phycoremediation for the clean and sustainable environment: A review

Emerging pollutants such as natural and manufactured chemicals, insecticides, pesticides, surfactants, and other biological agents such as personal care products, cosmetics, pharmaceuticals, and many industrial discharges hamper the aquatic environment. Nanomaterials and microplastics, among the categories of pollutants, can directly interfere with the marine ecosystem and translate into deleterious effects for humans and animals. They are either uncontrolled or poorly governed. Due to their known or suspected effects on human and environmental health, some chemicals are currently causing concern. The aquatic ecology is at risk from these toxins, which have spread worldwide. This review assesses the prevalence of emerging and hazardous pollutants that have effects on aquatic ecosystems and contaminated water bodies and their toxicity to non-target organisms. Microalgae are found to be a suitable source to remediate the above-mentioned risks. Microalgae based mitigation techniques are currently emerging approaches for all such contaminants, including the other categories that are discussed above. These studies describe the mechanism of phycoremediation, provide outrage factors that may significantly affect the efficiency of contaminants removal, and discuss the future directions and challenges of microalgal mediated remediations.

Multifunctional natural derived carbon quantum dots from Withania somnifera (L.) - Antiviral activities against SARS-CoV-2 pseudoviron

Natural carbon dots (NCQDs) are expediently significant in the photo-, nano- and biomedical spheres owing to their facile synthesis, optical and physicochemical attributes. In the present study, three NCQDs are prepared and optimized from Withania somnifera (ASH) by one-step hydrothermal (bottom-up) method: HASHP (without dopant), nitrogen doped HASHNH3 (surface passivation using ammonia) and HASHEDA (surface passivation with ethylenediamine). The HR-TEM images reveal that HASHP, HASNH3, HASHEDA are spherically shaped with 2.5 ± 0.5 nm, 4 ± 1 nm and 5 ± 2 nm particle size, respectively, whereas FTIR confirms the aqueous solubility and nitrogen doping. The XRD patterns ensure that the NCQDs are amorphous and graphitic in nature. Comparatively, HASHNH3 (32.5%) and HASHEDA (27.6%) portray better fluorescence quantum yield than HASHP (5.6%). The increase in quantum yield for the doped NCQDs can be attributed to the surface passivation using ammonia and ethylenediamine. Surface passivation plays a crucial role in enhancing the fluorescence properties of quantum dots. The introduction of nitrogen through ammonia and ethylenediamine provides additional electronic states, possibly reducing non-radiative recombination sites and hence boosting the QY. In addition, an antiviral study unveils the striking potential of surface passivated NCQDs to curb Covid-19 crises with around 85% inhibition of SARS-CoV pseudoviron cells, which is better in comparison to the non-doped NCQDs. Hence, to understand the paramount efficacy of these NCQDs, a hypothesis on their possible mechanism of action against Covid-19 is discussed.

Bioengineering strategies of microalgae biomass for biofuel production: recent advancement and insight

Algae-based biofuel developed over the past decade has become a viable substitute for petroleum-based energy sources. Due to their high lipid accumulation rates and low carbon dioxide emissions, microalgal species are considered highly valuable feedstock for biofuel generation. This review article presented the importance of biofuel and the flaws that need to be overcome to ensure algae-based biofuels are effective for future-ready bioenergy sources. Besides, several issues related to the optimization and engineering strategies to be implemented for microalgae-based biofuel derivatives and their production were evaluated. In addition, the fundamental studies on the microalgae technology, experimental cultivation, and engineering processes involved in the development are all measures that are commendably used in the pre-treatment processes. The review article also provides a comprehensive overview of the latest findings about various algae species cultivation and biomass production. It concludes with the most recent data on environmental consequences, their relevance to global efforts to create microalgae-based biomass as effective biofuels, and the most significant threats and future possibilities.

Nanosized core-shell (NiFe2O4/TiO2) heterostructure for enhanced photodegradation against polycyclic aromatic hydrocarbons

The global level of attention has been raised for photocatalytic pollutant removal technologies for degrading organic pollutants because of rising concerns about their toxicity. In this study, NiFe2O4/TiO2 core shells and pure samples of NiFe2O4 and TiO2 were synthesized using the sol-gel process and used to degrade naphthalene which is one among the polycyclic aromatic hydrocarbons (PAHs) pollutant. The synthesized materials were evaluated using a variety of analytical techniques, and the typical NiFe2O4/TiO2 core-shell results showed good purity and a lack of other impurity structures. Through morphological characterization, the core-shell structure of NiFe2O4/TiO2 has been established. However, the activity of visible light degradation was boosted by the generation of hydroxyl radicals after the electron-hole pair was delayed. Additionally, a lower band gap in NiFe2O4/TiO2 than in pure materials promotes photocatalytic activity. Similarly, photocatalytic naphthalene elimination by the core-shell achieved 67% efficiency after 150 min of visible light exposure. Furthermore, the produced core-shell has a high magnetic property, making separation from the photo-irradiated solutions easier; as a result, recycling was likely successful up to three cycles. The photocatalytic mechanism of the NiFe2O4/TiO2 composite was proposed. This research could also be applied to the degradation of other polycyclic aromatic hydrocarbon contaminants.

Biomass waste as an alternative source of carbon and silicon-based absorbents for CO2 capturing application

The production of low-cost solid adsorbents for carbon dioxide (CO2) capture has gained massive consideration. Biomass wastes are preferred as precursors for synthesis of CO2 solid adsorbents, due to their high CO2 adsorption efficiency, and ease of scalable low-cost production. This review particularly focuses on waste biomass-derived adsorbents with their CO2 adsorption performances. Specifically, studies related to carbon (biochar and activated carbon) and silicon (silicates and geopolymers)-based adsorbents were summarized. The impact of experimental parameters including nature of biomass, synthesis route, carbonization temperature and type of activation methods on the CO2 adsorption capacities of biomass-derived pure carbon and silicon-based adsorbents were evaluated. The development of various enhancement strategies on biomass-derived adsorbents for CO2 capture and their responsible factors that impact adsorbent's CO2 capture proficiency were also reviewed. The possible CO2 adsorption mechanisms on the adsorbent's surface were highlighted. The challenges and research gaps identified in this research area have also been emphasized, which will help as further research prospects.

Smart and sensitive nanomaterial-based electrochemical sensor for the determination of a poly (ADP-ribose) polymerase (PARP) inhibitor anticancer agent

In this research, we propose a novel approach for constructing a sensitive and selective electrochemical sensor utilizing high-quality multi-walled carbon nanotubes functionalized with amino groups (MWCNT-NH2) for the detection of Talazoparib (TLZ), a poly (ADP-ribose) polymerase (PARP) enzyme inhibitor, in real samples. The MWCNT-NH2-based sensor exhibited remarkable performance characteristics, including excellent repeatability, reproducibility, and high selectivity against various interferences. Under optimized conditions, the sensor demonstrated a wide linear concentration range of 1.0-5.0 μM, with a low limit of detection (LOD) of 0.201 μM. Substantiated by rigorous analysis of pharmaceutical and biological matrices, our methodology emerges as a paragon of reliability, boasting recovery rates within the satisfactory bracket of 96.38-105.25%. The successful application of the MWCNT-NH2-based sensor in practical sample analysis highlights its potential for implementation in clinical and pharmaceutical settings. This research not only advances the application of MWCNT-NH2 in electrochemical sensing but also opens new avenues for the development and monitoring of innovative anticancer treatments. The insights gained from our study have far-reaching implications, pointing toward a future where precision and innovation converge to improve patient care and treatment outcomes.

Biochar supported nano core-shell (TiO2/CoFe2O4) for wastewater treatment

The porous structure of biochar, its large surface area, and its anti-oxidant properties are extensively used for pollutant removal strategies. The literature to date has reported that the biochar assisted metal-oxide core-shells have a dominating degradation ability under solar irradiation. Therefore, this study is significantly focused on cinnamon biochar as an active anti-oxidant agent incorporated in titania-cobalt ferrite nanocore-shell (Biochar/TiO2/CoFe2O4) structures for the first time in wastewater treatment against chlorophenol pollutants. Pure materials, core-shells, and biochar aided composites were synthesized by chemical methods, and their characteristics were analyzed using various instrumentation techniques. The diffraction outcomes of Biochar/TiO2/CoFe2O4 showed the mixed phases containing biochar, TiO2, and CoFe2O4. The morphological characteristics revealed that the biochar creates porosity and a peripheral layer covering the core-shell. Meanwhile, absorption studies of TiO2/CoFe2O4 core-shell and Biochar/TiO2/CoFe2O4 samples achieved 65% and 92% degradation efficiencies when exposed to visible light against chlorophenol pollutants, respectively. All these results confirm the presence of distinct functional groups as well as the combined synergistic effects that activated the charge separation, resulting in the successful destruction of water pollutants. In addition, the highly efficient Biochar/TiO2/CoFe2O4 sample was recycled, and the efficiency was maintained stable for five repeated degradation processes. Thus, Biochar/TiO2/CoFe2O4 will be utilized to expand the possibilities for biofuel generation and energy storage devices.

Harvesting visible light for enhanced catalytic degradation of wastewater using TiO2@Fe3O4 embedded on two dimensional reduced graphene oxide nanosheets

Carbon-integrated binary metal oxide semiconductors have gained prominence in the last decade as a better material for photocatalytic wastewater treatment technology. In this regard, this research describes the investigation of the binary metal oxide TiO2@Fe3O4 embedded on reduced graphene oxide (rGO) nanosheets synthesized through a combination of sol-gel, chemical precipitation, and Hummer's processes. Besides, the catalyst is applied for the photocatalytic degradation of organic chlorophenol pollutants. The characterized diffraction results showed the peak broadening of the rGO-TiO2@Fe3O4 composite formed with tetragonal and cubic structures having small crystallite sizes. The TEM observation shows an enormous miniature of TiO2@Fe3O4 nanospheres spread on the folded 2D-rGO nanosheets with a large BET surface area. The XPS result holds the mixed phases of Fe3O4 and Fe2O3. Finally, the catalyst demonstrated a low band gap with extended light absorption towards visible light irradiation. The synergistic interactions between Fe3+ and Fe2+ improved the visible light activity due to the incorporation of rGO, and also possessed good recycling capacity. The increased mobility of electrons at the interfaces of TiO2 and Fe3O4 due to the mixing of rGO results in the separation of charge carriers by elevating the photocatalytic degradation efficiency of chlorophenol.

The degradation of bisphenol-A organic pollutant using the dispersal of TiO2 nanorods onto the partial reduction of graphene oxide nanosheets

The notion of innovative combinations of semiconducting metal oxides for photocatalytic destruction is a key factor in the removal of environmental contaminants. However, for the first time, the combination was made possible for the aforementioned reason by embedding one-dimensional titanium dioxide (TiO2) semiconductor nanorods on two-dimensional rGO (reduced graphene oxide) nanosheets utilizing hydrothermal and a modified Hummers' method. By applying several sophisticated procedures, the properties of these catalysts were found, and then the degradation of BPA (bisphenol-A) was examined with UV and visible light sources. Further, all the analyses were performed on pure TiO2 material. As a result of the synergistic interaction between TiO2 and rGO, the rGO-TiO2 catalyst produced a favorable photocatalytic outcome. The structural investigation of rGO-TiO2 has confirmed that the TiO2 was in anatase phase along with GO and rGO peaks, and the morphological characterization showed that the TiO2 nanorods were integrated randomly into the rGO nanosheets along with defective sites. Also, adding rGO to TiO2 causes charge separation, and π-π interactions to improve the visible light absorption range. In this study, the main model organic component in the photocatalytic degradation is bisphenol-A (BPA). During visible light irradiation, the OH radicals were finally produced by the redox reactions. Furthermore, the rGO surface adsorbs the phenol molecules due to graphene π-π interactions, thus narrowing the band gap and increasing the efficiency of BPA degradation.

Mesoporous NiO/Ni2O3 nanoflowers for favorable visible light photocatalytic degradation of 4-chlorophenol

The present study highlights the treatment of industrial effluent, which is one of the most life-threatening factors. Herein, for the first time, two types of NiO (green and black) photocatalysts were prepared by facile chemical precipitation and thermal decomposition methods separately. The synthesized NiO materials were demonstrated with various instrumental techniques for finding their characteristics. The X-ray diffraction studies (XRD) and X-ray photoelectron spectroscopy (XPS) revealed the presence of Ni2O3 in black NiO material. The transmission electron microscopic (TEM) images engrained the nanospherical shaped green NiO and nanoflower shaped black NiO/Ni2O3 materials. Further, the band gap of black NiO nanoflower was 2.9 eV compared to green NiO having 3.8 eV obtained from UV-vis spectroscopy. Meanwhile, both NiO catalysts were employed for visible light degradation, which yields a 60.3% efficiency of black NiO comparable to a 4.3% efficiency of green NiO within 180 min of exposure. The higher degrading efficiency of black NiO was due to the presence of Ni2O3 and the development of pores, which was evident from the Barrett-Joyner-Halenda (BJH) method. Type IV hysteresis was observed in black NiO nanoflowers with high surface area and pore size measurements. This black NiO/Ni2O3 synthesized from the thermal decomposition method has promoted better photocatalytic degradation of 4-chlorophenol upon exposure to visible light and is applicable for other industrial pollutants.

L-lysine Functionalized Mesoporous Silica Hybrid Nanoparticles for pH-Responsive Delivery of Curcumin

Stimuli-responsive controlled drug delivery systems have attracted the attention of researchers in recent decades due to their potential application in developing efficient drug carriers that are responsive to applied stimuli triggers. In this work, we present the synthesis of L-lysine (an amino acid that combines both amine and carboxylic acid groups in a single unit) modified mesoporous silica nanoparticles (MS@Lys NPs) for the delivery of the anticancer bioactive agent (curcumin, Cur) to cancer cells. To begin, mesoporous silica hybrid nanoparticles (MS@GPTS NPs) with 3-glycidoxypropyl trimethoxy silane (GPTS) were synthesized. The L-lysine groups were then functionalized onto the mesopore channel surfaces of the MS@GPTS NPs through a ring-opening reaction between the epoxy groups of the GPTS and the amine groups of the L-lysine units. Several instrumental techniques were used to examine the structural properties of the prepared L-lysine-modified mesoporous silica nanoparticles (MS@Lys NPs). The drug loading and pH-responsive drug delivery behavior of MS@Lys NPs were studied at different pH levels (pH 7.4, 6.5, and 4.0) using curcumin (Cur) as a model anticancer bioactive agent. The MS@Lys NPs' in vitro cytocompatibility and cell uptake behavior were also examined using MDA-MB-231 cells. The experimental results imply that MS@Lys NPs might be used in cancer therapy as pH-responsive drug delivery applications.

Selective removal of copper (II) ions from aqueous solution using pyridyl-bridged mesoporous organosilica hybrid adsorbent

The incorporation of active functional groups into the mesoporous organosilica hybrid materials is efficient for various applications. A newly designed mesoporous organosilica adsorbent was prepared using diaminopyridyl groups bridged-(bis-trimethoxy)organosilane (DAPy) precursor by using Pluronic P123 as structure directing template via sol-gel co-condensation method. The hydrolysis reaction of DAPy precursor and tetraethyl orthosilacate (TEOS) with a DAPy content of about 20 mol% to TEOS were incorporated into the mesopore walls of the mesoporous organosilica hybrid nanoparticles (DAPy@MSA NPs). Low-angle XRD and FT-IR, N₂ adsorption-desorption analysis, SEM, TEM, and TG analysis were used to characterize the synthesized DAPy@MSA NPs. The DAPy@MSA NPs exhibit an order mesoporous structure with a high surface area, mesopore size and pore volume of approximately ∼465 m²/g, 4.4 nm and 0.48 cm³/g, respectively. The pyridyl groups integrated DAPy@MSA NPs showed the selective adsorption of Cu²⁺ ions from the aqueous medium by metal-ligand complex coordination of Cu²⁺ ions with the integrated pyridyl groups and the pendant hydroxyl (-OH) functional groups present into the mesopore walls of the DAPy@MSA NPs. In the presence of other competitive metal ions (Cr²⁺, Cd²⁺, Ni²⁺, Zn²⁺, and Fe²⁺), the DAPy@MSA NPs showed relatively high adsorption of Cu²⁺ ions (276 mg/g) from aqueous solution as compared to the other competitive metal ions at the same concentration (100 mg/L) of initial metal ion solution.

Modified poly(vinylidene fluoride) nanomembranes for dye removal from water - A review

Water contamination due to soluble synthetic dyes has serious concerns. Membrane-based wastewater treatments are emerging as a preferred choice for removing dyes from water. Poly(vinylidene fluoride) (PVDF)-based nanomembranes have gained much popularity due to their favorable features. This review explores the application of PVDF-based nanomembranes in synthetic dye removal through various treatments. Different fabrication methods to obtain high performance PVDF-based nanomembranes were discussed under surface coating and blending methods. Studies related to use of PVDF-based nanomembranes in adsorption, filtration, catalysis (oxidant activation, ozonation, Fenton process and photocatalysis) and membrane distillation have been elaborately discussed. Nanomaterials including metal compounds, metals, (synthetic/bio)polymers, metal organic frameworks, carbon materials and their composites were incorporated in PVDF membrane to enhance its performance. The advantages and limitations of incorporating nanomaterials in PVDF-based membranes have been highlighted. The influence of nanomaterials on the surface features, mechanical strength, hydrophilicity, crystallinity and catalytic ability of PVDF membrane was discussed. The conclusion of this literature review was given along with future research.

A mechanothermal approach for the synthesis of Fe3O4 nanoparticles as dopant on mesoporous TiO2 for electrochemical determination of catechol

The subject of water contamination and how it gets defiled to the society and humans is confabulating from the past decades. Phenolic compounds widely exist in the water sources and it is emergent to determine the toxicity in natural and drinking water, because it is hazardous to the humans. Among these compounds, catechol has sought a strong concern because of its rapid occurrence in nature and its potential toxicity to humans. The present work aims to develop an effective electrochemical sensing of catechol using mesoporous structure of Fe₃O₄-TiO₂ decorated on glassy carbon (GC) electrode. The creation of pure TiO₂ using the sol-gel technique was the first step in the synthesis protocol for binary nanocomposite, which was then followed by the loading of Fe₃O₄ nanoparticles on the surface of TiO₂ using the thermal decomposition method. The resultant Fe₃O₄-TiO₂ based nanocomposite exhibited mesoporous structure and the cavities were occupied with highly active magnetite nanoparticles (Fe₃O₄) with high specific surface area (90.63 m²/g). When compared to pure TiO₂, catechol showed a more prominent electrochemical response for Fe₃O₄-TiO₂, with a significant increase in anodic peak current at a lower oxidation potential (0.387 V) with a detection limit of 45 μM. Therefore, the prepared magnetite binary nanocomposite can serve as an efficient electroactive material for sensing of catechol, which could also act as a promising electrocatalyst for various electrocatalytic applications.

Progressive yield of nickel cobaltite nanocubes for visible light utilization and degrading activities of methyl orange dye pollutant

In this study, pure cobalt oxide (Co₃O₄) as well as nickel cobaltite (NiCo₂O₄) were investigated with their capacity of degradation efficiency for textile dyes like methyl orange (MO) employing visible light irradiation. Two variable concentrations of nickel cobaltite (NiCo₂O₄) with 75:25 and 50:50 wt ratios along with the pure metal oxides were synthesized by thermal decomposition method and analyzed by various sophisticated instruments. Initially, the structural characteristics described the fine crystalline nature of NiCo₂O₄ and also exhibits reduced size than the pure component material (Co₃O₄). Besides, NiCo₂O₄ catalysts represented nano cubic shaped particles, and also their coordinating functional groups were evaluated. Further, the absorption wavelength confirms the two band positions of NiCo₂O₄ which leads to promote visible light absorption, and degrading efficiency of about 47.5% for NiCo₂O₄ (75:25) sample compared with NiCo₂O₄ (50:50) which produced only 26.3% degradation. This higher efficiency of the former was due to high crystallinity and interfacial charge transfer of combined Ni²⁺, Ni³⁺, Co²⁺ and Co³⁺ redox couples. This consecutively produces effective OH radicals that brought the degradation effectively under visible light. The recycling capacity up to 5 repeated cycles has been studied with the NiCo₂O₄ (75:25) and therefore the catalyst can further be used in other dye degradation.

Facile synthesis of CuO/g-C3N4 nanolayer composites with superior catalytic reductive degradation behavior

The cupric oxide (CuO) loaded graphitic carbon nitride (g-C₃N₄) nanocomposites (CuO/g-C₃N₄) were prepared by a facile calcination method. The formation of monoclinic CuO nanocrystals along with g-C₃N₄ was confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopic analysis. X-ray photoelectron spectral (XPS) analysis further confirms the formation of CuO/g-C₃N₄. Distribution of CuO stone-like crystalline nanoparticles on g-C₃N₄ nanosheets was observed by transmission electron microscopic images. The influence of CuO loading on the optical property of g-C₃N₄ was determined by ultraviolet (UV)-visible absorption and photoluminescence (PL) spectral analysis. Band gap was decreased from 2.7 to 2.3 eV by the addition of CuO nanoparticles. The catalytic performance of the synthesized samples in 4-nitrophenol (4-NP) and methyl orange (MO) reduction was evaluated. The 5 wt% CuO/g-C₃N₄ showed 99.5% (7 min) and 99.7% (4 min) reduction efficiency for 4-NP and MO respectively. The 5 wt% CuO/g-C₃N₄ could become a potential catalyst in the chemical treatment of organic pollutants.

Nanocubic copper cobaltite for methyl orange degradation through photocatalytic process

In this study, cubic spinel structured CuCo₂O₄ (Copper cobaltite) nanospheres were fabricated by thermal decomposition method. The visible light degradation of organic contaminant methyl orange (MO) was focused in this study using the synthesized pure CuO, Co₃O₄ and CuCo₂O₄ with different weight ratios of raw materials (90:10, 75:25 and 50:50). It could be well realized that after the characterization techniques, the synthesized CuCo₂O₄ materials resembled cubic spinel structure as confirmed by X-ray diffraction (XRD) investigation. Meanwhile, all the synthesized materials through transmission electron microscopy (TEM) have showed cubic shaped particles and among the CuCo₂O₄ materials, CuCo₂O₄ (50:50) expressed not as much of crystallinity due to the agglomerated nanospheres. On the other hand, well crystalline CuCo₂O₄ (75:25) displayed higher surface area than the other materials when analysed through Brunauer-Emmett-Teller (BET) method. The Fourier transform infra-red (FTIR) spectrum has evinced the formation of CuCo₂O₄ nanostructures. In addition, the cubic spinel structured CuCo₂O₄ provided positive results over visible light irradiation. Finally, the CuCo₂O₄ (75:25) sample has scored high as much of 85% MO degradation compared with others. This sample was progressed with repetitive recycling tests and presented the best photocatalytic degradation efficiency. The upgraded results of CuCo₂O₄ sample have been linked with the developed synergistic effects during the formation of binary metal oxides. Also, the interfacial electron-hole formation leads to the migration and hindering of charge carriers for visible light activity.

The influence of heterostructured TiO2/ZnO nanomaterials for the removal of azo dye pollutant

In recent times, there has been an inspired research on combining semiconducting metal oxides for improved industrial applications. Significantly, wastewater removal is concerned and the researchers are finding new methodologies for removing azo dyes that possess a high level of carcinogenic effects. In this connection, this work investigates the photocatalytic activity of synthesized TiO2/ZnO nanocomposite irradiated under UV and visible light. The application of the work involves the removal of methylene blue (MB) dye solution. Initial work begins with the novel synthesis of TiO2/ZnO coupled system by integrated sol-gel and thermal decomposition methods. Then, various characterization techniques brought out the existing properties of the prepared TiO2/ZnO catalyst. The X-ray diffraction measurements showed the assorted tetragonal and hexagonal structures. The spherical shape mixed with hexagonal shaped particles were perceived via transmission electron microscopy (TEM). Besides, from photoluminescence spectrum (PL) results, the TiO2/ZnO coupled system displayed slowing down of charge recombination, because of the intermediate states that helps in intensifying the photocatalytic activity. The dual absorption bands corresponding to UV region were deep-rooted from UV-vis spectroscopy. Further, the valuable application of the catalyst in removing methylene blue (MB) dye under both UV and visible light was carried out. The catalyst had displayed 90% of degradation within 40 min under UV light conditions. The other hand, visible light illumination of the catalyst provides divergent results as it possess lesser light absorption. Therefore, this catalyst was unable to yield visible light photocatalytic activity. Hence, this captivating research would bring the wastewater treatment progression using UV light.

Highly operative NiO/ZnO nanocomposites for photocatalytic removal of azo dye

The far-reaching technology of semiconductors in treating water pollutants reduces serious health hazards to humans and other eco-systems. With this interpretation, this work is attempted for the first time to synthesize nanosized pristine NiO and ZnO materials, and NiO/ZnO (70:30, 50:50) composites by co-precipitation method. The synthesized materials were then portrayed for their properties using various instrumental techniques such as X-ray diffraction (XRD), Transmission electron microscope (TEM), Energy dispersive X-ray spectrum (EDXS), Fourier transform Infrared spectrum (FT-IR). The main approach of this work is connected with the ultra violet (UV) photocatalytic degradation of MO (methyl orange) by employing the synthesized nanomaterials as catalysts. In view of results, the photocatalytic degradation of NiO/ZnO (70:30) has reported the greatest efficiency than the other catalysts. This outcome lies with the consideration of higher content of NiO present in the composite than ZnO. Further, there was the existence of higher surface area analysed from the BET result. Also, the NiO/ZnO (50:50) sample showed lower degradation efficiency in terms of formed agglomeration when surveyed through TEM. Besides, the positive mechanism of photocatalysis reaction forms the essential hydroxyl radicals which correspond to MO degradation. Moreover, the highly efficient NiO/ZnO (70:30) sample has been trialled for photocatalytic repetition process to observe the stability of degradation. It has accounted with good efficiency for 5 repeated cycles. Finally for UV degradation, the recognized photocatalytic aspect was due to the surface morphology enhanced surface area, synergistic effects of metal oxides and electron-hole charge separation.

Biosorption of heavy metals by microorganisms: Evaluation of different underlying mechanisms

Globally, ecotoxicologists, environmental biologists, biochemists, pathologists, and other experts are concerned about environmental contamination. Numerous pollutants, such as harmful heavy metals and emerging hazardous chemicals, are pervasive sources of water pollution. Water pollution and sustainable development have several eradication strategies proposed and used. Biosorption is a low-cost, easy-to-use, profitable, and efficient method of removing pollutants from water resources. Microorganisms are effective biosorbents, and their biosorption efficacy varies based on several aspects, such as ambient factors, sorbing materials, and metals to be removed. Microbial culture survival is also important. Biofilm agglomerates play an important function in metal uptake by extracellular polymeric molecules from water resources. This study investigates the occurrence of heavy metals, their removal by biosorption techniques, and the influence of variables such as those indicated above on biosorption performance. Ion exchange, complexation, precipitation, and physical adsorption are all components of biosorption. Between 20 and 35 °C is the optimal temperature range for biosorption efficiency from water resources. Utilizing living microorganisms that interact with the active functional groups found in the water contaminants might increase biosorption efficiency. This article discusses the negative impacts of microorganisms on living things and provides an outline of how they affect the elimination of heavy metals.

Existence of Ti3+ and dislocation on nanoporous CdO-TiO2 heterostructure applicable for degrading chlorophenol pollutant

This study addresses the significance of wastewater recuperation by a simple and facile treatment process known as photocatalyst technology using visible light. Titanium di-oxide (TiO₂) is the most promising photocatalyst ever since longing decades, has good activity under UV light, owing to its small band gap. Hence, TiO₂ has been modified with metal oxides for the positive response against visible light. Since this is an efficient process, the novelty has been made on nanometal oxide CdO (cadmium oxide) combined with TiO₂ to acquire the best efficiency of degrading organic chlorophenol contaminant. Initially, the composites were synthesized by sol-gel and thermal decomposition methods and investigated for their various outstanding properties. The characterized outcomes have exhibited heterostructures with reduced crystallite size from the X-ray diffraction studies. Then, the determination of nanoporous feature was recognized through HR-TEM analysis which was also detected with some dislocations. The EDX spectrum was identified the perfect elemental composition. The nitrogen adsorption-desorption equilibrium was attained that offers many pores measured with high surface area. The XPS result convinced that Ti³⁺ was accessible along with TIO₂/CdO composite. Further the absorption towards higher wavelength was obtained from UV-vis spectra. Finally, for the photocatalytic application of chlorophenol, the composite shows higher percentage of degrading efficiencies than the pristine TiO₂. The photocatalytic mechanism was discussed in detail.

Recent trends and advancements in nanoporous membranes for water purification

When it comes to electrocatalysis, the creation of nanodevices, the research of energy and the environment, and diagnostics, nanoporous materials are an asset. Nanoporous membranes, which can be used to filter water, have recently been the subject of new research and are summarized in this review. These membranes are used to remove salts and metallic ions from the water following an analysis of several nanoporous membrane types and production procedures. Demonstrations and discussions of these membrane systems are then conducted. Nanoporous membranes can be used to filter water, according to the conclusions of this study, which will help readers better grasp how they work. As a result, novel water purification nanoporous compounds that are easy to manufacture, inexpensive, and effective will be developed. Merits and demerits of nanoporous membrane for water treatment and its advancements in purification were discussed.

Occurrences and removal of pharmaceutical and personal care products from aquatic systems using advanced treatment- A review

Pharmaceuticals, personal care items, steroid hormones, and agrochemicals are among the synthetic and indigenous products that make up micropollutants, also known as emerging contaminants. Pharmaceutical and personal care products (PPPs) are a class of developing micropollutants that can harm living organisms even at low concentrations. Many are detected in surface water and wastewater from the treatment process, with quantities ranging from ng L-1 to gL-1; however, residual PPPs at dangerously high levels have indeed recently been recognized in the ecosystem. Residential sewage treatment plant (STP) dump the largest majority of these pollutants into the environment on a regular basis. As a result of its robust structure, it has a longer lifespan in the environment. This review article discusses how surface water pollutants such pesticides, petroleum hydrocarbons, and perfluorinated compounds affect water quality, as well as the most cost-effective adsorbents for removing these PPPs. The goal of this study is to provide information about the origins of PPP, as well as diagnostic procedures and treatment options. Research on developing contaminants is also aimed at evaluating the efficacy and affordability of adsorption.

Orange peel extract influenced partial transformation of SnO2 to SnO in green 3D-ZnO/SnO2 system for chlorophenol degradation

In recent times, visible light enhancement has become much more considered due to the enlightening properties of nanocomposite systems. This has potential applications for wastewater treatment due to the blemish of toxic organic chemicals from industrial sectors. Therefore, this work is focused on novel 3D ZnO/SnO₂ nanocomposites synthesized by the green method (orange peel extracts supported combined chemical processes) utilized for the removal of chlorophenol effluent. The orange peel extract has been incorporated as one of the major components to synthesize an effective nanocomposite. Also, the pure materials were synthesized along with these nanocomposites and tested under various instrumental techniques. The characterized results showed that the composites prepared with orange peel extract exhibited hexagonal 3D ZnO nanospheres with 3D tetragonal structured SnO₂ nanocubes. Elemental analysis showed that the partial amount of SnO₂ has transformed to SnO due to the reducing ability of orange peel extract. Also, the existing different (Zn²⁺, Sn⁴⁺, and Sn²⁺) states helped in delaying the transfer of electron-hole recombination to obtain photocatalytic chlorophenol degradation. Further, the prevailing line dislocation can compromise more vacancy and interact with more electrons. The high surface area, least crystallite size, and lower bandgap inspired to enhance the visible light activity. Simultaneously, the pure form of nanomaterial has poor light absorption under visible light. This study achieves the photocatalytic degradation of 77.5% against chlorophenol using a green 3D composite system.

Visible light driven exotic p (CuO) - n (TiO2) heterojunction for the photodegradation of 4-chlorophenol and antibacterial activity

The treatment of industrial waste and harmful bacteria is an important topic due to the release of toxins from the industrial pollutants that damage the water resources. These harmful sources frighten the life of every organism which was later developed as the carcinogenic and mutagenic agents. Therefore, the current study focuses on the breakdown or degradation of 4-chlorophenol and the antibacterial activity against Escherichia coli (E. coli). As a well-known catalyst, pure titanium-di-oxide (TiO₂) had not shown the photocatalytic activity in the visible light region. Hence, band position of TiO₂ need to be shifted to bring out the absorption in the visible light region. For this purpose, the n-type TiO₂ nanocrystalline material's band gap got varied by adding different ratios of p-type CuO. The result had appeared in the formation of p (CuO) - n (TiO₂) junction synthesized from sol-gel followed by chemical precipitation methods. The optical band gap value was determined by Kubelka-Munk (K-M) plot through UV-Vis diffusive reflectance spectroscopy (DRS). Further, the comprehensive mechanism and the results of photocatalytic and antibacterial activities were discussed in detail. These investigations are made for tuning the TiO₂ catalyst towards improving or eliminating the existing various environmental damages.

CuO-ZnO-PANI a lethal p-n-p combination in degradation of 4-chlorophenol under visible light

Recent interest and responsibility to retain the water resources rose among people. Scientists have been engaged to develop the mechanism that involves the freely available sunlight - a sustainable resource - to remove the pollutants from water to make it again suitable for life. Ample research was reported in the removal of dye pollutants present in water. For this they have utilized p type and n type semiconductors or combination of both (p-n type) under the excitation of a wide range of electromagnetic band energy. Most of the interest lies in emerging out of the mechanism with hybrid semiconductors to remove the previously reported flaws. Toward this regard, this manuscript aims to develop unique material using the underlying p-n-p model for harnessing visible light in catalysis. Initially, p-n structure was developed with copper oxide (p-type) and zinc oxide (n-type), then polyaniline (p-type) conjugated at different concentrations (0.5 M, 0.7 M & 1.0 M), to yield p-n-p models, using precipitation followed by sonication techniques. Detailed physicochemical investigations were conducted on the resultant p-n-p material to elucidate its characteristics. Furthermore, the mechanism was advocated for the best photocatalytic activity under visible light excitation for the degradation of 4-chlorophenol and compared with the performance of a standard p-n (CuO/ZnO) combination.

Photocatalytic degradation of 2,4-dichlorophenol using bio-green assisted TiO2-CeO2 nanocomposite system

In recent times, cost effective synthesis of semiconductor materials has been a subject of concern for the day to today applications. In this work, novelty has been made on the facile synthesis of metal oxides (TiO₂ and CeO₂) and nanocomposites (TiO₂-CeO₂) through sol-gel and precipitation methods of imparting lemon extract. The synthesized materials behave as the functional catalysts which has been further carried out for the photocatalytic degradation against 2,4-Dichlorophenol (2,4-DCP). The materials are then valued for the structural and optical properties. The lemon extract used in synthesis has played a premier role in upgrading the charge carrier separation, bandgap, and size reduction of the composite system. Further, the CeO₂ supported TiO₂ sample acts as the better visible light catalyst, due to the prevention of aggregation and existence of line dislocation that supported to access the additional electron trap sites.