Rubredoxin as a paramagnetic relaxation-inducing probe

Unusual Reduction Mechanism of Copper in Cysteine-Rich Environment

Copper-cysteine interactions play an important role in Biology and herein we used the copper-substituted rubredoxin (Cu-Rd) from Desulfovibrio gigas to gain further insights into the copper-cysteine redox chemistry. EPR spectroscopy results are consistent with Cu-Rd harboring a Cu^II center in a sulfur-rich coordination, in a distorted tetrahedral structure ( g_∥,⊥ = 2.183 and 2.032 and A_∥,⊥ = 76.4 × 10^-4 and 12 × 10^-4 cm^-1). In Cu-Rd, two oxidation states at Cu-center (Cu^II and Cu^I) are associated with Cys oxidation-reduction, alternating in the redox cycle, as pointed by electrochemical studies that suggest internal geometry rearrangements associated with the electron transfer processes. The midpoint potential of [Cu^I(S-Cys)₂(Cys-S-S-Cys)]/[Cu^II(S-Cys)₄] redox couple was found to be -0.15 V vs NHE showing a large separation of cathodic and anodic peaks potential (Δ E_p = 0.575 V). Interestingly, sulfur-rich Cu^II-Rd is highly stable under argon in dark conditions, which is thermodynamically unfavorable to Cu-thiol autoreduction. The reduction of copper and concomitant oxidation of Cys can both undergo two possible pathways: oxidative as well as photochemical. Under O₂, Cu^II plays the role of the electron carrier from one Cys to O₂ followed by internal geometry rearrangement at the Cu site, which facilitates reduction at Cu-center to yield Cu^I(S-Cys)₂(Cys-S-S-Cys). Photoinduced (irradiated at λ_ex = 280 nm) reduction of the Cu^II center is observed by UV-visible photolysis (above 300 nm all bands disappeared) and tryptophan fluorescence (∼335 nm peak enhanced) experiments. In both pathways, geometry reorganization plays an important role in copper reduction yielding an energetically compatible donor-acceptor system. This model system provides unusual stability and redox chemistry rather than the universal Cu-thiol auto redox chemistry in cysteine-rich copper complexes.

Predicting Protein-Protein Interactions Using BiGGER: Case Studies

The importance of understanding interactomes makes preeminent the study of protein interactions and protein complexes. Traditionally, protein interactions have been elucidated by experimental methods or, with lower impact, by simulation with protein docking algorithms. This article describes features and applications of the BiGGER docking algorithm, which stands at the interface of these two approaches. BiGGER is a user-friendly docking algorithm that was specifically designed to incorporate experimental data at different stages of the simulation, to either guide the search for correct structures or help evaluate the results, in order to combine the reliability of hard data with the convenience of simulations. Herein, the applications of BiGGER are described by illustrative applications divided in three Case Studies: (Case Study A) in which no specific contact data is available; (Case Study B) when different experimental data (e.g., site-directed mutagenesis, properties of the complex, NMR chemical shift perturbation mapping, electron tunneling) on one of the partners is available; and (Case Study C) when experimental data are available for both interacting surfaces, which are used during the search and/or evaluation stage of the docking. This algorithm has been extensively used, evidencing its usefulness in a wide range of different biological research fields.

Incorporation of molybdenum in rubredoxin: models for mononuclear molybdenum enzymes

Molybdenum is found in the active site of enzymes usually coordinated by one or two pyranopterin molecules. Here, we mimic an enzyme with a mononuclear molybdenum-bis pyranopterin center by incorporating molybdenum in rubredoxin. In the molybdenum-substituted rubredoxin, the metal ion is coordinated by four sulfurs from conserved cysteine residues of the apo-rubredoxin and two other exogenous ligands, oxygen and thiol, forming a Mo((VI))-(S-Cys)4(O)(X) complex, where X represents -OH or -SR. The rubredoxin molybdenum center is stabilized in a Mo(VI) oxidation state, but can be reduced to Mo(IV) via Mo(V) by dithionite, being a suitable model for the spectroscopic properties of resting and reduced forms of molybdenum-bis pyranopterin-containing enzymes. Preliminary experiments indicate that the molybdenum site built in rubredoxin can promote oxo transfer reactions, as exemplified with the oxidation of arsenite to arsenate.

Jahn-Teller dynamics in a series of high-symmetry Co(II) chelates determine paramagnetic relaxation enhancements

NMR paramagnetic relaxation enhancements (PREs) of a series of structurally characterized, trigonal bis-trispyrazolylborate (Tp) chelates of high-spin Co(II), spanning 100-850 MHz in field, are reported. Prior knowledge of the metal-nucleus distances allows numerical extraction of position-dependent electron spin relaxation rates (τ(c)(-1)) from direct measurement of the individual PREs of the four symmetry distinct protons in Co(Tp)(2), using available closed-form expressions. The data for this electronically complex system where spin-orbit coupling defines the ground state electronic structure are analyzed in terms of the Solomon-Bloembergen-Morgan (SBM) relations, as well as available zero-field splitting limit theories. A simple angular correction is shown to be sufficient to reconcile the individual τ(c)(T) data for the four classes of protons. The data identify a previously unrecognized dynamic Jahn-Teller effect in these historically important complexes, with a barrier of ~230 cm(-1), pointing to a level of dynamics in trispyrazolylborate chemistry that has not been described before, and further show that it is the Jahn-Teller that is responsible for the PREs in fluid solution. A field-dependent component is also identified for the two protons nearest g(//), which is suggested to arise due to Zeeman mixing of excited state character into the ground level.

Multifrequency EPR study of Fe3+ and Co2+ in the active site of desulforedoxin

The understanding of the electronic structure of S > 1/2 transition-metal sites that show a large zero-field splitting (ZFS) of the magnetic sublevels benefits greatly from study by electron-paramagnetic-resonance (EPR) spectroscopy at frequencies above the standard 9.5 GHz. However, high-frequency EPR spectroscopy is technically challenging and still developing. Particularly the sensitivity of high-frequency EPR spectrometers is often too low to apply the technique in the study of transition-metal sites in proteins and enzymes. Here we report a multifrequency EPR study (at 9.5, 94.9, and 275.7 GHz) of the active site of the protein desulforedoxin, both in its natural Fe(3+) form and substituted with Co(2+). The 275.7 GHz EPR spectra made it possible to determine the ZFS parameters of the Fe(3+) site with high precision. No 275.7 GHz spectrum could be observed of the Co(2+) site, but based on 9.5 GHz spectra, its ZFS parameters could be estimated. We find that the typical variation in the geometry of the active site of a protein or enzyme, referred to as conformational strain, does not only make the detection of EPR spectra challenging, but also their analysis. Comparison of the EPR results on the active site of desulforedoxin to those of the closely related active site of rubredoxin illustrates the necessity of explicit quantum-chemical calculations in order to interrelate the electronic and geometric structure of biological transition-metal sites.

The electron transfer complex between nitrous oxide reductase and its electron donors

Identifying redox partners and the interaction surfaces is crucial for fully understanding electron flow in a respiratory chain. In this study, we focused on the interaction of nitrous oxide reductase (N(2)OR), which catalyzes the final step in bacterial denitrification, with its physiological electron donor, either a c-type cytochrome or a type 1 copper protein. The comparison between the interaction of N(2)OR from three different microorganisms, Pseudomonas nautica, Paracoccus denitrificans, and Achromobacter cycloclastes, with their physiological electron donors was performed through the analysis of the primary sequence alignment, electrostatic surface, and molecular docking simulations, using the bimolecular complex generation with global evaluation and ranking algorithm. The docking results were analyzed taking into account the experimental data, since the interaction is suggested to have either a hydrophobic nature, in the case of P. nautica N(2)OR, or an electrostatic nature, in the case of P. denitrificans N(2)OR and A. cycloclastes N(2)OR. A set of well-conserved residues on the N(2)OR surface were identified as being part of the electron transfer pathway from the redox partner to N(2)OR (Ala495, Asp519, Val524, His566 and Leu568 numbered according to the P. nautica N(2)OR sequence). Moreover, we built a model for Wolinella succinogenes N(2)OR, an enzyme that has an additional c-type-heme-containing domain. The structures of the N(2)OR domain and the c-type-heme-containing domain were modeled and the full-length structure was obtained by molecular docking simulation of these two domains. The orientation of the c-type-heme-containing domain relative to the N(2)OR domain is similar to that found in the other electron transfer complexes.

Continuous-wave EPR at 275GHz: application to high-spin Fe(3+) systems

The 275GHz electron-paramagnetic-resonance spectrometer we reported on in 2004 has been equipped with a new probe head, which contains a cavity especially designed for operation in continuous-wave mode. The sensitivity and signal stability that is achieved with this new probe head is illustrated with 275GHz continuous-wave spectra of a 1mM frozen solution of the complex Fe(III)-ethylenediamine tetra-acetic acid and of 10mM frozen solutions of the protein rubredoxin, which contains Fe(3+) in its active site, from three different organisms. The high quality of the spectra of the rubredoxins allows the determination of the zero-field-splitting parameters with an accuracy of 0.5GHz. The success of our approach results partially from the enhanced absolute sensitivity, which can be reached using a single-mode cavity. At least as important is the signal stability that we were able to achieve with the new probe head.