Fabrication of PNIPAM-chitosan/decatungstoeuropate/silica nanocomposite for thermo/pH dual-stimuli-responsive and luminescent drug delivery system

Co-delivery of carboplatin and doxorubicin using ZIF-8 coated chitosan-poly(N-isopropyl acrylamide) nanoparticles through a dual pH/thermo responsive strategy to breast cancer cells

A dual pH/temperature sensitive core-shell nanoformulation has been developed based on ZIF-8 coated with chitosan-poly(N-isopropyl acrylamide) (CS-PNIPAAm) for co-delivery of doxorubicin (DOX) and carboplatin (CBP) in breast cancer cells. The resulting nanoparticles (NPs) had particle sizes around 200 nm and a zeta potential of about +30 mV. The CBP and DOX loading contents in the final NPs were 11.6 % and 55.54 %, respectively. NPs showed a pH and thermoresponsive drug release profile with a sustained prolonged release under physiological conditions. The in vitro cytotoxicity experiments showed a significant synergism of CBP and DOX to induce the IC50 of 1.96 μg/mL in MCF-7 cells and 4.54 μg/mL in MDA-MB-231 cells. Also, the final NPs were safer than free DOX and CBP on normal cells. The in vitro study confirmed the higher potency of the designed NPs in combination therapy against breast cancer cells with lower side effects than free drugs.

Environmental stimulus-responsive mesoporous silica nanoparticles as anticancer drug delivery platforms

Currently, cancer poses a significant health challenge in the medical community. Traditional chemotherapeutic agents are often accompanied by toxic side effects and limited therapeutic efficacy, restricting their application and advancement in cancer treatment. Therefore, there is an urgent need for developing intelligent drug release systems. Mesoporous silica nanoparticles (MSNs) have many advantages, such as a large specific surface area, substantial pore volume and size, adjustable mesoporous material pore size, excellent biocompatibility, and thermodynamic stability, making them ideal carriers for drug delivery and release. Additionally, they have been widely used to develop novel anticancer drug carriers. Recently, MSNs have been employed to design responsive systems that react to the tumor microenvironment and external stimuli for controlled release of anticancer drugs. This includes factors within the intratumor environment, such as pH, temperature, enzymes, and glutathione as well as external tumor stimuli, such as light, magnetic field, and ultrasound, among others. In this review, we discuss the research progress on environmental stimulus-responsive MSNs in anticancer drug delivery systems, including internal and external environment single stimulus-responsive release and combined stimulus-responsive release. We also summarize the current challenges associated with environmental stimulus-responsive MSNs and elucidate future directions, providing a reference for the functionalization modification and practical application of these MSNs.

Thermo- and pH-responsive targeted lipid-coated mesoporous nano silica platform for dual delivery of paclitaxel and gemcitabine to overcome HER2-positive breast cancer

In the current study, a new monoclonal antibody conjugated dual stimuli lipid-coated mesoporous silica nanoparticles (L-MSNs) platform was developed and investigated for specific co-delivery of the paclitaxel (PTX) and gemcitabine (Gem) to cancer cells and preventing their side effects during the treatment process. First, MSNs were synthesized and then coated with as-prepared pH-, and thermo-sensitive niosomes to produce L-MSNs. For this aim, Dipalmitoylphosphatidylcholine (DPPC) was used to create thermo-sensitivity, and 1, 2-Distearoyl-sn-glycerol-3-phosphoethanolamine -Citraconic Anhydride-Polyethylene Glycol (DSPE-CA-PEG) polymers were prepared and incorporated to the lipid layer for creation of pH-sensitivity. In the next step, trastuzumab as a monoclonal antibody (mAb) was conjugated to the maleimide groups of the 1, 2-Distearoyl-sn-glycerol-3-phosphoethanolamine DSPE-polyethylene glycol (PEG)-maleimide agents in the lipid bilayer via a disulfide bond. Dynamic light scattering (DLS) and zeta potential measurements, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM) analyses were utilized to characterize the synthesized particles before and after surface modification. The encapsulation efficiency (EE%) and loading efficiency (LE%) of the particles were also evaluated. Additionally, the drug release study and MTT assay were done to evaluate the bioactivity potential of the fabricated platforms. The results of DLS and zeta potential measurements revealed an average size of 200 nm and a neutral zeta potential of about -1 mV for mAb-L-MSNs. Also, the FTIR spectra confirmed the formation of mAb-L-MSNs. Moreover, SEM analysis showed spherical-shaped MSNs with amorphous structure confirmed by XRD analysis, and BET test revealed ∼ 820 m2/g specific surface area and pore about 5 nm in size. The values of EE% and LE% of PTX were 90.3 % and 26.7 %, while these values for GEM were 89.5 % and 38.8 % in the co-loaded form, respectively. The thermo-pH-sensitivity examination showed approximately 500 nm of size increase after the change of pH and temperature from 7.4 and 37˚C to 5 and 42˚C. The release profile showed a pH-, and thermo-dependence manner, which led to about 89 % and 95 % of PTX and GEM released from the co-loaded platform at a pH of 5 and 42 °C while these values were 31.1 % and 32.2 % at pH of 7.4 and 37˚C, respectively. MTT assay data presented that when the mAb-L-co-loaded-MSNs platform containing 250 µg/mL drug was used, about 92 % of cells died in human epidermal receptors (HER2)-positive breast cancer cells (SKBR3), while just about 4 % of HER2-negative normal cells were killed. However, the growth inhibition rate of SKBR3 cells was caused by empty-mAb-L-MSNs, pure PTX and GEM combination were 9 % and 87 %, respectively. Moreover, the half inhibitory concentration (IC50) of the pure PTX, pure GEM, and mAb-coloaded-L-MSNs were 33, 17.6, and 6.5 µg/mL. The synergic effect of co-encapsulation of PTX and GEM in addition to trastuzumab conjugated L-MSNs was confirmed by a combinational index (CI) of 0.34. Therefore, this strategy leads to specific targeted drug delivery to cancer cells using a key-lock interaction between the trastuzumab and HER-2 receptors on the cancer cell membrane which stimuli the endocytosis of the particles to the cells followed by the destruction of the lipid layer in the acidic pH and the temperature of the lysosome, leading to enhanced release of PTX and GEM (pH of 5 and 42˚C). So, this platform can be considered a suitable carrier for cancer treatment.

Temperature-responsive and biocompatible nanocarriers based on clay nanotubes for controlled anti-cancer drug release

Administration of temperature-responsive drug carriers that release anticancer drugs at high temperatures can benefit hyperthermia therapies because of the synergistic effect of anticancer drug molecules and high temperature on killing the cancer cells. In this study, we design and characterize a new temperature-responsive nanocarrier based on a naturally occurring and biocompatible clay mineral, halloysite nanotubes. Poly(N-isopropylacrylamide) brushes were grown on the surface of halloysite nanotubes using a combination of mussel-inspired dopamine polymerization and surface-initiated atom transfer radical polymerization. The chemical structure of the hybrid materials was investigated using X-ray photoelectron spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The hybrid material was shown to have a phase transition temperature of about 32 °C, corresponding to a 40 nm thick polymer layer surrounding the nanotubes. Cell studies suggested that grafting of poly(N-isopropylacrylamide) brushes on the polydopamine-modified halloysite nanotubes suppresses the cytotoxicity caused by the polydopamine interlayer and drug release studies on nanotubes loaded with doxorubicin showed that thanks to the poly(N-isopropylacrylamide) brushes a temperature-dependent drug release is observed. Finally, a fluorescent dye molecule was covalently attached to the polymer-grafted nanotubes and stimulated emission depletion nanoscopy was used to confirm the internalization of the nanotubes in HeLa cells.

Chitosan-based nanoscale systems for doxorubicin delivery: Exploring biomedical application in cancer therapy

Green chemistry has been a growing multidisciplinary field in recent years showing great promise in biomedical applications, especially for cancer therapy. Chitosan (CS) is an abundant biopolymer derived from chitin and is present in insects and fungi. This polysaccharide has favorable characteristics, including biocompatibility, biodegradability, and ease of modification by enzymes and chemicals. CS-based nanoparticles (CS-NPs) have shown potential in the treatment of cancer and other diseases, affording targeted delivery and overcoming drug resistance. The current review emphasizes on the application of CS-NPs for the delivery of a chemotherapeutic agent, doxorubicin (DOX), in cancer therapy as they promote internalization of DOX in cancer cells and prevent the activity of P-glycoprotein (P-gp) to reverse drug resistance. These nanoarchitectures can provide co-delivery of DOX with antitumor agents such as curcumin and cisplatin to induce synergistic cancer therapy. Furthermore, co-loading of DOX with siRNA, shRNA, and miRNA can suppress tumor progression and provide chemosensitivity. Various nanostructures, including lipid-, carbon-, polymeric- and metal-based nanoparticles, are modifiable with CS for DOX delivery, while functionalization of CS-NPs with ligands such as hyaluronic acid promotes selectivity toward tumor cells and prevents DOX resistance. The CS-NPs demonstrate high encapsulation efficiency and due to protonation of amine groups of CS, pH-sensitive release of DOX can occur. Furthermore, redox- and light-responsive CS-NPs have been prepared for DOX delivery in cancer treatment. Leveraging these characteristics and in view of the biocompatibility of CS-NPs, we expect to soon see significant progress towards clinical translation.

An injectable thermosensitive hydrogel with self-assembled peptide coupled with antimicrobial peptide for enhanced wound healing

Wound dressing based on thermosensitive hydrogel shows advantages over performed traditional dressings such as rapid reversible sol-gel-sol transition property and the capacity of filling the irregular wound area. Herein, RA-Amps...

Recent Applications of Dual-Stimuli Responsive Chitosan Hydrogel Nanocomposites as Drug Delivery Tools

Polysaccharides are a versatile class of macromolecules that are involved in many biological interactions critical to life. They can be further modified for added functionality. Once derivatized, these polymers can exhibit new chemical properties that can be further optimized for applications in drug delivery, wound healing, sensor development and others. Chitosan, derived from the N-deacetylation of chitin, is one example of a polysaccharide that has been functionalized and used as a major component of polysaccharide biomaterials. In this brief review, we focus on one aspect of chitosan's utility, namely we discuss recent advances in dual-responsive chitosan hydrogel nanomaterials.