Application and prospect of antimonene: A new two-dimensional nanomaterial in cancer theranostics

2D Materials in Flexible Electronics: Recent Advances and Future Prospectives

Flexible electronics have recently gained considerable attention due to their potential to provide new and innovative solutions to a wide range of challenges in various electronic fields. These electronics require specific material properties and performance because they need to be integrated into a variety of surfaces or folded and rolled for newly formatted electronics. Two-dimensional (2D) materials have emerged as promising candidates for flexible electronics due to their unique mechanical, electrical, and optical properties, as well as their compatibility with other materials, enabling the creation of various flexible electronic devices. This article provides a comprehensive review of the progress made in developing flexible electronic devices using 2D materials. In addition, it highlights the key aspects of materials, scalable material production, and device fabrication processes for flexible applications, along with important examples of demonstrations that achieved breakthroughs in various flexible and wearable electronic applications. Finally, we discuss the opportunities, current challenges, potential solutions, and future investigative directions about this field.

Mechanical characteristics and failure behavior of puckered and buckled allotropes of antimonene nanotubes: a molecular dynamics study

In recent years, antimonene nanotubes have attracted considerable interest for diverse applications owing to their promising physical properties. In this study, classical molecular dynamics simulations with Stillinger-Weber potential were carried out to explore the fundamental mechanical characteristics of two stable allotropes of antimonene nanotubes (SbNTs), namely puckered (α-) and buckled (β-) nanotubes. Mechanical properties and deformation mechanisms of antimonene nanotubes, including ultimate tensile strength, fracture strain, and Young's modulus, were thoroughly examined by considering chirality, diameter, temperature, and strain rate variables. Numerical simulations revealed that all SbNT specimens examined in this study exhibit brittle failures with a complete loss of load-bearing capability following the ultimate stress level. The brittle nature of the SbNTs with varied diameters remained unchanged under different temperatures and loading-rate conditions. Owing to their distinct crystal structure in the armchair and zigzag directions, α-SbNTs present a distinctive anisotropic behavior compared to β-SbNTs. While the variation of the elastic modulus with temperature is not notable, the tensile strength and fracture strain of SbNTs deteriorated considerably at high temperatures. Furthermore, it was observed that the effects of diameter and temperature on zigzag α-SbNT are more pronounced due to its lower stability. Altogether, this study presents a comprehensive examination of the mechanical characteristics of the two stable antimonene allotropes and provides useful information for their potential utilizations in a wide range of applications.

Crafting two-dimensional materials for contrast agents, drug, and heat delivery applications through green technologies

The development of two-dimensional (2D) materials for biomedical applications has accelerated exponentially. Contrary to their bulk counterparts, the exceptional properties of 2D materials make them highly prospective for contrast agents for bioimage, drug, and heat delivery in biomedical treatment. Nevertheless, empty space in the integration and utilisation of 2D materials in living biological systems, potential toxicity, as well as required complicated synthesis and high-cost production limit the real application of 2D materials in those advance medical treatments. On the other hand, green technology appears to be one of strategy to shed a light on the blurred employment of 2D in medical applications, thus, with the increasing reports of green technology that promote advanced technologies, here, we compile, summarise, and synthesise information on the biomedical technology of 2D materials through green technology point of view. Beginning with a fundamental understanding, of crystal structures, the working mechanism, and novel properties, this article examines the recent development of 2D materials. As well as 2D materials made from natural and biogenic resources, a recent development in green-related synthesis was also discussed. The biotechnology and biomedical-related application constraints are also discussed. The challenges, solutions, and prospects of the so-called green 2D materials are outlined.

Inorganic Nanomaterials Used in Anti-Cancer Therapies:Further Developments

In this article, we provide an overview of the progress of scientists working to improve the quality of life of cancer patients. Among the known methods, cancer treatment methods focusing on the synergistic action of nanoparticles and nanocomposites have been proposed and described. The application of composite systems will allow precise delivery of therapeutic agents to cancer cells without systemic toxicity. The nanosystems described could be used as a high-efficiency photothermal therapy system by exploiting the properties of the individual nanoparticle components, including their magnetic, photothermal, complex, and bioactive properties. By combining the advantages of the individual components, it is possible to obtain a product that would be effective in cancer treatment. The use of nanomaterials to produce both drug carriers and those active substances with a direct anti-cancer effect has been extensively discussed. In this section, attention is paid to metallic nanoparticles, metal oxides, magnetic nanoparticles, and others. The use of complex compounds in biomedicine is also described. A group of compounds showing significant potential in anti-cancer therapies are natural compounds, which have also been discussed.

Selenide Heterostructure Nanosheets with Efficient Near-Infrared Photothermal Conversion for Therapy

Photothermal therapy has been regarded as one of promising ways for tumor treatment. However, nanoagents with highly efficient thermal conversion and good bio-compatibility are still needed to be developed in biomedicine. In this work, we prepared two-dimensional heterostructures with bismuth selenide and tungsten selenide nanosheets as photothermal nanoagents. Near-infrared photothermal conversion of selenide heterostructure nanosheets can reach up to 40.75% under 808 nm excitation. It is known that selenium is a critical element to human health. More importantly, our experiments with mice show that the heterostructure nanosheets have low toxicity and high biocompatibility both in vitro and in vivo. The nanoagents based on heterostructures can effectively realize photothermal tumor ablation. It is suggested that the developed selenide nanosheets have great potential application in cancer therapy.

A New, Thorough Look on Unusual and Neglected Group III-VI Compounds Toward Novel Perusals

The attention on group III-VI compounds in the last decades has been centered on the optoelectronic properties of indium and gallium chalcogenides. These outstanding properties are leading to novel advancements in terms of fundamental and applied science. One of the advantages of these compounds is to present laminated structures, which can be exfoliated down to monolayers. Despite the large knowledge gathered toward indium and gallium chalcogenides, the family of the group III-VI compounds embraces several other noncommon compounds formed by the other group III elements. These compounds present various crystal lattices, among which a great deal is offered from layered structures. Studies on aluminium chalcogenides show interesting potential as anodes in batteries and as semiconductors. Thallium (Tl), which is commonly present in the +1 oxidation state, is one of the key components in ternary chalcogenides. However, binary Tl-Q (Q = S, Se, Te) systems and derived films are still studied for their semiconducting and thermoelectric properties. This review aims to summarize the biggest features of these unusual materials and to shed some new light on them with the perspective that in the future, novel studies can revive these compounds in order to give rise to a new generation of technology.

Antimonene: a tuneable post-graphene material for advanced applications in optoelectronics, catalysis, energy and biomedicine

The post-graphene era is undoubtedly marked by two-dimensional (2D) materials such as quasi-van der Waals antimonene. This emerging material has a fascinating structure, exhibits a pronounced chemical reactivity (in contrast to graphene), possesses outstanding electronic properties and has been postulated for a plethora of applications. However, chemistry and physics of antimonene remain in their infancy, but fortunately recent discoveries have shed light on its unmatched allotropy and rich chemical reactivity offering a myriad of unprecedented possibilities in terms of fundamental studies and applications. Indeed, antimonene can be considered as one of the most appealing post-graphene 2D materials reported to date, since its structure, properties and applications can be chemically engineered from the ground up (both using top-down and bottom-up approaches), offering an unprecedented level of control in the realm of 2D materials. In this review, we provide an in-depth analysis of the recent advances in the synthesis, characterization and applications of antimonene. First, we start with a general introduction to antimonene, and then we focus on its general chemistry, physical properties, characterization and synthetic strategies. We then perform a comprehensive study on the allotropy, the phase transition mechanisms, the oxidation behaviour and chemical functionalization. From a technological point of view, we further discuss the applications recently reported for antimonene in the fields of optoelectronics, catalysis, energy storage, cancer therapy and sensing. Finally, important aspects such as new scalable methodologies or the promising perspectives in biomedicine are discussed, pinpointing antimonene as a cutting-edge material of broad interest for researchers working in chemistry, physics, materials science and biomedicine.

Functional two-dimensional MXenes as cancer theranostic agents

Recently, MXenes, as a kind of two-dimensional (2D) layered materials with exceptional performance, have become the research hotspots owing to their unique structural, electronic, and chemical properties. They have potential applications in electrochemical storage, photocatalysis, and biosensors. Furthermore, they have certain characteristics such as large surface area, favorable biocompatibility, and ideal mechanical properties, which can expand their applications in biomedical fields, especially in cancer therapy. To date, several researchers have explored the applications of MXenes in tumor elimination, which exhibited other fantastic properties of those 2D MXenes, such as efficient in vivo photothermal ablation, low phototoxicity, high biocompatibility, etc. In this review, the structures, properties, modifications, and preparation methods are introduced respectively. More importantly, the multifunctional platforms for cancer therapy based on MXenes nanosheets (NSs) are reviewed in detail, including single-modality and combined-modality cancer therapy. Finally, the prospects and challenges of MXenes are prospected and discussed. STATEMENT OF SIGNIFICANCE: In this review, the structures, properties, modifications, and preparation methods of MXenes nanomaterials are introduced, respectively. In addition, the preparation conditions and morphological characterizations of some common MXenes for therapeutic platforms are also summarized. More importantly, the practical applications of MXenes-based nanosheets are reviewed in detail, including drug delivery, biosensing, bioimaging, and multifunctional tumor therapy platforms. Finally, the future prospects and challenges of MXenes are prospected and discussed.

2D Heterostructures for Ubiquitous Electronics and Optoelectronics: Principles, Opportunities, and Challenges

A grand family of two-dimensional (2D) materials and their heterostructures have been discovered through the extensive experimental and theoretical efforts of chemists, material scientists, physicists, and technologists. These pioneering works contribute to realizing the fundamental platforms to explore and analyze new physical/chemical properties and technological phenomena at the micro-nano-pico scales. Engineering 2D van der Waals (vdW) materials and their heterostructures via chemical and physical methods with a suitable choice of stacking order, thickness, and interlayer interactions enable exotic carrier dynamics, showing potential in high-frequency electronics, broadband optoelectronics, low-power neuromorphic computing, and ubiquitous electronics. This comprehensive review addresses recent advances in terms of representative 2D materials, the general fabrication methods, and characterization techniques and the vital role of the physical parameters affecting the quality of 2D heterostructures. The main emphasis is on 2D heterostructures and 3D-bulk (3D) hybrid systems exhibiting intrinsic quantum mechanical responses in the optical, valley, and topological states. Finally, we discuss the universality of 2D heterostructures with representative applications and trends for future electronics and optoelectronics (FEO) under the challenges and opportunities from physical, nanotechnological, and material synthesis perspectives.

ICG-Loaded PEG-Modified Black Phosphorus Nanosheets for Fluorescence Imaging-Guided Breast Cancer Therapy

Indocyanine green (ICG) has been used in various surgical navigation systems and plays an important role in intraoperative imaging diagnosis. However, the poor photostability and unsatisfactory tumor-targeting ability have limited its broad application prospects. In the decades, the construction of a nanodrug delivery system for tumor-targeting diagnosis and therapy has become a research hotspot. Black phosphorus nanosheets (BPNS), as a new kind of biodegradable nanomaterials, have the advantages of high loading capacity, good biocompatibility, tumor targeting, and photothermal effect over other two-dimensional (2D) reported nanomaterials. Herein, ICG-loaded poly(ethylene glycol) (PEG)-modified BPNS (ICG@BPNS-PEG) nanocomposites are constructed to improve the tumor-targeting capacity and guide photothermal therapy through real-time fluorescence imaging. In this study, ICG@BPNS-PEG nanocomposites with a suitable size (240 ± 28 nm) have been successfully constructed. The photostability of ICG@BPNS-PEG nanocomposites surpassed that of free ICG after four on-off cycles of near laser irradiation (NIR). Moreover, ICG@BPNS-PEG nanocomposites have enhanced photothermal conversion ability. The cellular uptake result through flow cytometry showed that ICG@BPNS-PEG nanocomposites could be swallowed easily owing to the suitable size and passive cellular uptake. In addition, the cytotoxicity evaluation of MCF-7, 4T1 breast cancer cells, and healthy RPE cells through the MTT assay demonstrated that ICG@BPNS-PEG nanocomposites have lower cytotoxicity and good cellular compatibility without irradiation. However, the cytotoxicity and live/dead staining proved that ICG@BPNS-PEG nanocomposites have satisfactory photothermal therapeutic effects when irradiated. In the 4T1-bearing mice model, the fluorescence imaging after intravenous injection of nanocomposites showed that ICG@BPNS-PEG nanocomposites have superior passive tumor targeting accumulation through the enhanced permeability and retention (EPR) effect compared with that of free ICG. Also, changes in tumor volume showed a remarkable tumor growth inhibition effect compared with other groups. Moreover, the results of hematoxylin-eosin (H&E) staining of major organs in 4T1-bearing mice also demonstrated that the nanocomposites have good biocompatibility. Therefore, the constructed ICG@BPNS-PEG nanocomposites have substantial potential in breast cancer therapy.

Infrared Polaritonic Biosensors Based on Two-Dimensional Materials

In recent years, polaritons in two-dimensional (2D) materials have gained intensive research interests and significant progress due to their extraordinary properties of light-confinement, tunable carrier concentrations by gating and low loss absorption that leads to long polariton lifetimes. With additional advantages of biocompatibility, label-free, chemical identification of biomolecules through their vibrational fingerprints, graphene and related 2D materials can be adapted as excellent platforms for future polaritonic biosensor applications. Extreme spatial light confinement in 2D materials based polaritons supports atto-molar concentration or single molecule detection. In this article, we will review the state-of-the-art infrared polaritonic-based biosensors. We first discuss the concept of polaritons, then the biosensing properties of polaritons on various 2D materials, then lastly the impending applications and future opportunities of infrared polaritonic biosensors for medical and healthcare applications.