Perturbation of the hierarchical folding of a large RNA by the destabilization of its Scaffold's tertiary structure

General Strategies for RNA X-ray Crystallography

An extremely small proportion of the X-ray crystal structures deposited in the Protein Data Bank are of RNA or RNA-protein complexes. This is due to three main obstacles to the successful determination of RNA structure: (1) low yields of pure, properly folded RNA; (2) difficulty creating crystal contacts due to low sequence diversity; and (3) limited methods for phasing. Various approaches have been developed to address these obstacles, such as native RNA purification, engineered crystallization modules, and incorporation of proteins to assist in phasing. In this review, we will discuss these strategies and provide examples of how they are used in practice.

Nucleobases Undergo Dynamic Rearrangements during RNA Tertiary Folding

The tertiary structure of the GTPase center (GAC) of 23S ribosomal RNA (rRNA) as seen in cocrystals is extremely compact. It is stabilized by long-range hydrogen bonds and nucleobase stacking and by a triloop that forms within its three-way junction. Its folding pathway from secondary structure to tertiary structure has not been previously observed, but it was shown to require Mg²⁺ ions in equilibrium experiments. The fluorescent nucleotide 2-aminopurine was substituted at selected sites within the 60-nt GAC. Fluorescence intensity changes upon addition of MgCl₂ were monitored over a time-course from 1ms to 100s as the RNA folds. The folding pathway is revealed here to be hierarchical through several intermediates. Observation of the nucleobases during folding provides a new perspective on the process and the pathway, revealing the dynamics of nucleobase conformational exchange during the folding transitions.

DEAD-box protein CYT-19 is activated by exposed helices in a group I intron RNA

DEAD-box proteins are nonprocessive RNA helicases and can function as RNA chaperones, but the mechanisms of their chaperone activity remain incompletely understood. The Neurospora crassa DEAD-box protein CYT-19 is a mitochondrial RNA chaperone that promotes group I intron splicing and has been shown to resolve misfolded group I intron structures, allowing them to refold. Building on previous results, here we use a series of tertiary contact mutants of the Tetrahymena group I intron ribozyme to demonstrate that the efficiency of CYT-19-mediated unfolding of the ribozyme is tightly linked to global RNA tertiary stability. Efficient unfolding of destabilized ribozyme variants is accompanied by increased ATPase activity of CYT-19, suggesting that destabilized ribozymes provide more productive interaction opportunities. The strongest ATPase stimulation occurs with a ribozyme that lacks all five tertiary contacts and does not form a compact structure, and small-angle X-ray scattering indicates that ATPase activity tracks with ribozyme compactness. Further, deletion of three helices that are prominently exposed in the folded structure decreases the ATPase stimulation by the folded ribozyme. Together, these results lead to a model in which CYT-19, and likely related DEAD-box proteins, rearranges complex RNA structures by preferentially interacting with and unwinding exposed RNA secondary structure. Importantly, this mechanism could bias DEAD-box proteins to act on misfolded RNAs and ribonucleoproteins, which are likely to be less compact and more dynamic than their native counterparts.

Folding pathways of the Tetrahymena ribozyme

Like many structured RNAs, the Tetrahymena group I intron ribozyme folds through multiple pathways and intermediates. Under standard conditions in vitro, a small fraction reaches the native state (N) with kobs ≈ 0.6 min(-1), while the remainder forms a long-lived misfolded conformation (M) thought to differ in topology. These alternative outcomes reflect a pathway that branches late in folding, after disruption of a trapped intermediate (Itrap). Here we use catalytic activity to probe the folding transitions from Itrap to the native and misfolded states. We show that mutations predicted to weaken the core helix P3 do not increase the rate of folding from Itrap but they increase the fraction that reaches the native state rather than forming the misfolded state. Thus, P3 is disrupted during folding to the native state but not to the misfolded state, and P3 disruption occurs after the rate-limiting step. Interestingly, P3-strengthening mutants also increase native folding. Additional experiments show that these mutants are rapidly committed to folding to the native state, although they reach the native state with approximately the same rate constant as the wild-type ribozyme (~1 min(-1)). Thus, the P3-strengthening mutants populate a distinct pathway that includes at least one intermediate but avoids the M state, most likely because P3 and the correct topology are formed early. Our results highlight multiple pathways in RNA folding and illustrate how kinetic competitions between rapid events can have long-lasting effects because the "choice" is enforced by energy barriers that grow larger as folding progresses.

An RNA folding motif: GNRA tetraloop-receptor interactions

Nearly two decades after Westhof and Michel first proposed that RNA tetraloops may interact with distal helices, tetraloop–receptor interactions have been recognized as ubiquitous elements of RNA tertiary structure. The unique architecture of GNRA tetraloops (N=any nucleotide, R=purine) enables interaction with a variety of receptors, e.g., helical minor grooves and asymmetric internal loops. The most common example of the latter is the GAAA tetraloop–11 nt tetraloop receptor motif. Biophysical characterization of this motif provided evidence for the modularity of RNA structure, with applications spanning improved crystallization methods to RNA tectonics. In this review, we identify and compare types of GNRA tetraloop–receptor interactions. Then we explore the abundance of structural, kinetic, and thermodynamic information on the frequently occurring and most widely studied GAAA tetraloop–11 nt receptor motif. Studies of this interaction have revealed powerful paradigms for structural assembly of RNA, as well as providing new insights into the roles of cations, transition states and protein chaperones in RNA folding pathways. However, further research will clearly be necessary to characterize other tetraloop–receptor and long-range tertiary binding interactions in detail – an important milestone in the quantitative prediction of free energy landscapes for RNA folding.

Evolutionary evidence for alternative structure in RNA sequence co-variation

Sequence conservation and co-variation of base pairs are hallmarks of structured RNAs. For certain RNAs (e.g. riboswitches), a single sequence must adopt at least two alternative secondary structures to effectively regulate the message. If alternative secondary structures are important to the function of an RNA, we expect to observe evolutionary co-variation supporting multiple conformations. We set out to characterize the evolutionary co-variation supporting alternative conformations in riboswitches to determine the extent to which alternative secondary structures are conserved. We found strong co-variation support for the terminator, P1, and anti-terminator stems in the purine riboswitch by extending alignments to include terminator sequences. When we performed Boltzmann suboptimal sampling on purine riboswitch sequences with terminators we found that these sequences appear to have evolved to favor specific alternative conformations. We extended our analysis of co-variation to classic alignments of group I/II introns, tRNA, and other classes of riboswitches. In a majority of these RNAs, we found evolutionary evidence for alternative conformations that are compatible with the Boltzmann suboptimal ensemble. Our analyses suggest that alternative conformations are selected for and thus likely play functional roles in even the most structured of RNAs.

RNA (Ribonucleic Acid) is a messenger of genetic information, master regulator, and catalyst in the cell. To carry out its function, RNA can fold into complex three-dimensional structures. Certain classes of RNAs, called riboswitches, adopt at least two alternative structures to act as a switch. We set out to detect the evolutionary signal for alternative structures in riboswitches as we hypothesize that these RNA sequences must have evolved to allow both conformations. We find that indeed such signals exist when we compare the sequences of riboswitches from multiple species. When we extend this analysis to other RNA regulators in the cell that are not thought of as switches, we detect equivalent evolutionary support for alternative structures. Viewed through the lens of evolutionary structure conservation RNA sequences appear to have adapted to adopt multiple conformations.

The long-range P3 helix of the Tetrahymena ribozyme is disrupted during folding between the native and misfolded conformations

RNAs are prone to misfolding, but how misfolded structures are formed and resolved remains incompletely understood. The Tetrahymena group I intron ribozyme folds in vitro to a long-lived misfolded conformation (M) that includes extensive native structure but is proposed to differ in topology from the native state (N). A leading model predicts that exchange of the topologies requires unwinding of the long-range, core helix P3, despite the presence of P3 in both conformations. To test this model, we constructed 16 mutations to strengthen or weaken P3. Catalytic activity and in-line probing showed that nearly all of the mutants form the M state before folding to N. The P3-weakening mutations accelerated refolding from M (3- to 30-fold) and the P3-strengthening mutations slowed refolding (6- to 1400-fold), suggesting that P3 indeed unwinds transiently. Upon depletion of Mg(2+), the mutations had analogous effects on unfolding from N to intermediates that subsequently fold to M. The magnitudes for the P3-weakening mutations were larger than in refolding from M, and small-angle X-ray scattering showed that the ribozyme expands rapidly to intermediates from which P3 is disrupted subsequently. These results are consistent with previous results indicating unfolding of native peripheral structure during refolding from M, which probably permits rearrangement of the core. Together, our results demonstrate that exchange of the native and misfolded conformations requires loss of a core helix in addition to peripheral structure. Further, the results strongly suggest that misfolding arises from a topological error within the ribozyme core, and a specific topology is proposed.

Impact of urea on the three-dimensional structure, viscoelastic and thermal behavior of iota-carrageenan

Urea breaks hydrogen bonds among biopolymers leading to structural destabilization. In the case of hydrocolloids urea addition is thought to impact gelation. Detailed information about its pertinent role on influencing the structure-function relationships of hydrocolloids is still elusive, however. The present investigation is aimed at delineating hydrocolloids structural behavior in the presence of urea employing iota-carrageenan as a model system. X-ray fiber diffraction, rheological and thermal properties of two iota-carrageenan solutions with weight concentrations 4.5 and 6.0% (w/w) at two urea molar concentrations (0.5 and 2.0 M) with and without heat treatments have been analyzed. X-ray results suggest that the canonical double helical structural arrangement of iota-carrageenan is maintained even after urea addition. However, improved crystallinity, ordering and altered unit cell dimensions especially with heat treatments of the binary mixtures indicate the promotion of favorable interactions among carrageenan helices in the presence of urea. Increased elastic modulus and onset temperature of melting endotherm with the heat treatment compared to cold addition further attests the X-ray observations of enhanced structural ordering. Overall, results suggest that urea molecules synergistically aid iota-carrageenan interactions and stabilize structure of junction zones. Our findings are deemed to be helpful in the design and development of novel non-food applications of hydrocolloids.

RNA molecules with conserved catalytic cores but variable peripheries fold along unique energetically optimized pathways

Functional and kinetic constraints must be efficiently balanced during the folding process of all biopolymers. To understand how homologous RNA molecules with different global architectures fold into a common core structure we determined, under identical conditions, the folding mechanisms of three phylogenetically divergent group I intron ribozymes. These ribozymes share a conserved functional core defined by topologically equivalent tertiary motifs but differ in their primary sequence, size, and structural complexity. Time-resolved hydroxyl radical probing of the backbone solvent accessible surface and catalytic activity measurements integrated with structural-kinetic modeling reveal that each ribozyme adopts a unique strategy to attain the conserved functional fold. The folding rates are not dictated by the size or the overall structural complexity, but rather by the strength of the constituent tertiary motifs which, in turn, govern the structure, stability, and lifetime of the folding intermediates. A fundamental general principle of RNA folding emerges from this study: The dominant folding flux always proceeds through an optimally structured kinetic intermediate that has sufficient stability to act as a nucleating scaffold while retaining enough conformational freedom to avoid kinetic trapping. Our results also suggest a potential role of naturally selected peripheral A-minor interactions in balancing RNA structural stability with folding efficiency.

Probing mechanism and transition state of RNA refolding

Kinetics and the atomic detail of RNA refolding are only poorly understood. It has been proposed that conformations with transient base pairing interaction are populated during RNA refolding, but a detailed description of those states is lacking. By NMR and CD spectroscopy, we examined the refolding of a bistable RNA and the influence of urea, Mg(2+), and spermidine on its refolding kinetics. The bistable RNA serves as a model system and exhibits two almost equally stable ground-state conformations. We designed a photolabile caged RNA to selectively stabilize one of the two ground-state conformations and trigger RNA refolding by in situ light irradiation in the NMR spectrometer. We can show that the refolding kinetics of the bistable RNA is modulated by urea, Mg(2+), and spermidine by different mechanisms. From a statistical analysis based on elementary rate constants, we deduce the required number of base pairs that need to be destabilized during the refolding transition and propose a model for the transition state of the folding reaction.

Multiple unfolding events during native folding of the Tetrahymena group I ribozyme

Despite the ubiquitous nature of misfolded intermediates in RNA folding, little is known about their physical properties or the folding transitions that allow them to continue folding productively. Folding of the Tetrahymena group I ribozyme includes sequential accumulation of two intermediates, termed I(trap) and misfolded (M). Here, we probe the structure and folding transition of I(trap) and compare them to those of M. Hydroxyl radical and dimethyl sulfate footprinting show that both I(trap) and M are extensively structured and crudely resemble the native RNA. However, regions of the core P3-P8 domain are more exposed to solvent in I(trap) than in M. I(trap) rearranges to continue folding nearly 1000-fold faster than M, and urea accelerates folding of I(trap) much less than M. Thus, the rate-limiting transition from I(trap) requires a smaller increase in exposed surface. Mutations that disrupt peripheral tertiary contacts give large and nearly uniform increases in re-folding of M, whereas the same mutations give at most modest increases in folding from I(trap). Intriguingly, mutations within the peripheral element P5abc give 5- to 10-fold accelerations in escape from I(trap), whereas ablation of P13, which lies on the opposite surface in the native structure, near the P3-P8 domain, has no effect. Thus, the unfolding required from I(trap) appears to be local, whereas the unfolding of M appears to be global. Further, the modest effects from several mutations suggest that there are multiple pathways for escape from I(trap) and that escape is aided by loosening nearby native structural constraints, presumably to facilitate local movements of nucleotides or segments that have not formed native contacts. Overall, these and prior results suggest a model in which the global architecture and peripheral interactions of the RNA are achieved relatively early in folding. Multiple folding and re-folding events occur on the predominant pathway to the native state, with increasing native core interactions and cooperativity as folding progresses.

Evaluation of the information content of RNA structure mapping data for secondary structure prediction

Structure mapping experiments (using probes such as dimethyl sulfate [DMS], kethoxal, and T1 and V1 RNases) are used to determine the secondary structures of RNA molecules. The process is iterative, combining the results of several probes with constrained minimum free-energy calculations to produce a model of the structure. We aim to evaluate whether particular probes provide more structural information, and specifically, how noise in the data affects the predictions. Our approach involves generating "decoy" RNA structures (using the sFold Boltzmann sampling procedure) and evaluating whether we are able to identify the correct structure from this ensemble of structures. We show that with perfect information, we are always able to identify the optimal structure for five RNAs of known structure. We then collected orthogonal structure mapping data (DMS and RNase T1 digest) under several solution conditions using our high-throughput capillary automated footprinting analysis (CAFA) technique on two group I introns of known structure. Analysis of these data reveals the error rates in the data under optimal (low salt) and suboptimal solution conditions (high MgCl(2)). We show that despite these errors, our computational approach is less sensitive to experimental noise than traditional constraint-based structure prediction algorithms. Finally, we propose a novel approach for visualizing the interaction of chemical and enzymatic mapping data with RNA structure. We project the data onto the first two dimensions of a multidimensional scaling of the sFold-generated decoy structures. We are able to directly visualize the structural information content of structure mapping data and reconcile multiple data sets.

Rapid quantification and analysis of kinetic •OH radical footprinting data using SAFA

The use of highly reactive chemical species to probe the structure and dynamics of nucleic acids is greatly simplified by software that enables rapid quantification of the gel images that result from these experiments. Semiautomated footprinting analysis (SAFA) allows a user to quickly and reproducibly quantify a chemical footprinting gel image through a series of steps that rectify, assign, and integrate the relative band intensities. The output of this procedure is raw band intensities that report on the relative reactivity of each nucleotide with the chemical probe. We describe here how to obtain these raw band intensities using SAFA and the subsequent normalization and analysis procedures required to process these data. In particular, we focus on analyzing time-resolved hydroxyl radical ((•)OH) data, which we use to monitor the kinetics of folding of a large RNA (the L-21 T. thermophila group I intron). Exposing the RNA to bursts of (•)OH radicals at specific time points during the folding process monitors the time progress of the reaction. Specifically, we identify protected (nucleotides that become inaccessible to the (•)OH radical probe when folded) and invariant (nucleotides with constant accessibility to the (•)OH probe) residues that we use for monitoring and normalization of the data. With this analysis, we obtain time-progress curves from which we determine kinetic rates of folding. We also report on a data visualization tool implemented in SAFA that allows users to map data onto a secondary structure diagram.

Hydroxyl-radical footprinting to probe equilibrium changes in RNA tertiary structure

Hydroxyl-radical footprinting utilizes the ability of a highly reactive species to nonspecifically cleave the solvent accessible regions of a nucleic acid backbone. Thus, changes in a nucleic acids structure can be probed either as a function of time or of a reagent's concentration. When combined with techniques that allow single nucleotide resolution of the resulting fragments, footprinting experiments provide richly detailed information about local changes in tertiary structure of a nucleic acid accompanying its folding or ligand binding. In this chapter, we present two protocols of equilibrium hydroxyl-radical footprinting based on peroxidative and oxidative Fenton chemistry and discuss how to adjust the Fenton reagent concentrations for a specific experimental condition. We also discuss the choice of the techniques to separate the reaction products and specifics of the data analysis for equilibrium footprinting experiments. Protocols addressing the use of peroxidative Fenton chemistry for time-resolved studies have been published [Schlatterer and Brenowitz, 2009. Methods; Shcherbakova and Brenowitz, 2008. Nat. Protoc.3(2), 288-302; Shcherbakova et al., 2006. Nucleic Acids Res.34(6), e48; Shcherbakova et al., 2007. Methods Cell Biol.84, 589-615].

Hierarchical self-assembly of complex polyhedral microcontainers

The concept of self-assembly of a two-dimensional (2D) template to a three-dimensional (3D) structure has been suggested as a strategy to enable highly parallel fabrication of complex, patterned microstructures. We have previously studied the surface tension based self-assembly of patterned, microscale polyhedral containers (cubes, square pyramids and tetrahedral frusta). In this paper, we describe the observed hierarchical self-assembly of more complex, patterned polyhedral containers in the form of regular dodecahedra and octahedra. The hierarchical design methodology, combined with the use of self-correction mechanisms, was found to greatly reduce the propagation of self-assembly error that occurs in these more complex systems. It is a highly effective way to mass-produce patterned, complex 3D structures on the microscale and could also facilitate encapsulation of cargo in a parallel and cost-effective manner. Furthermore, the behavior that we have observed may be useful in the assembly of complex systems with large numbers of components.

Semiautomated and rapid quantification of nucleic acid footprinting and structure mapping experiments

We have developed protocols for rapidly quantifying the band intensities from nucleic acid chemical mapping gels at single-nucleotide resolution. These protocols are implemented in the software SAFA (semi-automated footprinting analysis) that can be downloaded without charge from http://safa.stanford.edu. The protocols implemented in SAFA have five steps: (i) lane identification, (ii) gel rectification, (iii) band assignment, (iv) model fitting and (v) band-intensity normalization. SAFA enables the rapid quantitation of gel images containing thousands of discrete bands, thereby eliminating a bottleneck to the analysis of chemical mapping experiments. An experienced user of the software can quantify a gel image in approximately 20 min. Although SAFA was developed to analyze hydroxyl radical (*OH) footprints, it effectively quantifies the gel images obtained with other types of chemical mapping probes. We also present a series of tutorial movies that illustrate the best practices and different steps in the SAFA analysis as a supplement to this protocol.

Energy barriers, pathways, and dynamics during folding of large, multidomain RNAs

Large, multidomain RNA molecules are generally thought to fold following multiple pathways down rugged landscapes populated with intermediates and traps. A challenge to understanding RNA folding reactions is the complex relationships that exist between the structure of the RNA and its folding landscape. The identification of intermediate species that populate folding landscapes and characterization of elements of their structures are the key components to solving the RNA folding problem. This review explores recent studies that characterize the dominant pathways by which RNA folds, structural and dynamic features of intermediates that populate the folding landscape, and the energy barriers that separate the distinct steps of the folding process.

Thermodynamics and folding pathway of tetraloop receptor-mediated RNA helical packing

Little is known about the thermodynamic forces that drive the folding pathways of higher-order RNA structure. In this study, we employ calorimetric [isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC)] and spectroscopic (NMR and UV) methods to characterize the thermodynamics of the GAAA tetraloop-receptor interaction, utilizing a previously described bivalent construct. ITC studies indicate that the bivalent interaction is enthalpy driven and highly stable, with a binding constant (K(obs)) of 5.5x10(6) M(-1) and enthalpy (DeltaH(obs)(o)) of -33.8 kcal/mol at 45 degrees C in 20 mM KCl and 2 mM MgCl(2). Thus, we derive the DeltaH(obs)(o) for a single tetraloop-receptor interaction to be -16.9 kcal/mol at these conditions. UV absorbance data indicate that an increase in base stacking quality contributes to the enthalpy of complex formation. These highly favorable thermodynamics are consistent with the known critical role for the tetraloop-receptor motif in the folding of large RNAs. Additionally, a significant heat capacity change (DeltaC(p,obs)(o)) of -0.24 kcal mol(-1) K(-1) was determined by ITC. DSC and UV-monitored thermal denaturation experiments indicate that the bivalent tetraloop-receptor construct follows a minimally five-state unfolding pathway and suggest the observed DeltaC(p,obs)(o) for the interaction results from a temperature-dependent unbound receptor RNA structure.

Direct measurement of tertiary contact cooperativity in RNA folding

All structured biological macromolecules must overcome the thermodynamic folding problem to populate a unique functional state among a vast ensemble of unfolded and alternate conformations. The exploration of cooperativity in protein folding has helped reveal and distinguish the underlying mechanistic solutions to this folding problem. Analogous dissections of RNA tertiary stability remain elusive, however, despite the central biological importance of folded RNA molecules and the potential to reveal fundamental properties of structured macromolecules via comparisons of protein and RNA folding. We report a direct quantitative measure of tertiary contact cooperativity in a folded RNA. We precisely measured the stability of an independently folding P4-P6 domain from the Tetrahymena thermophila group I intron by single molecule fluorescence resonance energy transfer (smFRET). Using wild-type and mutant RNAs, we found that cooperativity between the two tertiary contacts enhances P4-P6 stability by 3.2 +/- 0.2 kcal/mol.

Dissecting RNA folding by nucleotide analog interference mapping (NAIM)

Nucleotide analog interference mapping (NAIM) is a powerful chemogenetic approach that allows RNA structure and function to be characterized at the atomic level. Random modifications of base or backbone moieties are incorporated into the RNA transcript as nucleotide analog phosphorothioates. The resulting RNA pool is then subjected to a stringent selection step, in which the RNA has to accomplish a specific task, for example, folding. RNA functional groups important for this process can be identified by physical isolation of the functional and the nonfunctional RNA molecules and subsequent mapping of the modified nucleotide positions in both RNA populations by iodine cleavage of the susceptible phosphorothioate linkage. This approach has been used to analyze a variety of aspects of RNA biochemistry, including RNA structure, catalysis and ligand interaction. Here, I describe how to set up a NAIM assay for studying RNA folding. This protocol can be readily adapted to study any RNAs and their properties. The time required to complete the experiment is dependent on the length of the RNA and the number of atomic modifications tested. In general, a single NAIM experiment can be completed in 1-2 weeks, but expect a time frame of several weeks to obtain reliable and statistically meaningful results.

Distinct contribution of electrostatics, initial conformational ensemble, and macromolecular stability in RNA folding

We distinguish the contribution of the electrostatic environment, initial conformational ensemble, and macromolecular stability on the folding mechanism of a large RNA using a combination of time-resolved "Fast Fenton" hydroxyl radical footprinting and exhaustive kinetic modeling. This integrated approach allows us to define the folding landscape of the L-21 Tetrahymena thermophila group I intron structurally and kinetically from its earliest steps with unprecedented accuracy. Distinct parallel pathways leading the RNA to its native form upon its Mg(2+)-induced folding are observed. The structures of the intermediates populating the pathways are not affected by variation of the concentration and type of background monovalent ions (electrostatic environment) but are altered by a mutation that destabilizes one domain of the ribozyme. Experiments starting from different conformational ensembles but folding under identical conditions show that whereas the electrostatic environment modulates molecular flux through different pathways, the initial conformational ensemble determines the partitioning of the flux. This study showcases a robust approach for the development of kinetic models from collections of local structural probes.

Deletion of the P5abc peripheral element accelerates early and late folding steps of the Tetrahymena group I ribozyme

The P5abc peripheral element stabilizes the Tetrahymena group I ribozyme and enhances its catalytic activity. Despite its beneficial effects on the native structure, prior studies have shown that early formation of P5abc structure during folding can slow later folding steps. Here we use a P5abc deletion variant E(deltaP5abc) to systematically probe the role of P5abc throughout tertiary folding. Time-resolved hydroxyl radical footprinting shows that E(deltaP5abc) forms its earliest stable tertiary structure on the millisecond time scale, approximately 5-fold faster than the wild-type ribozyme, and stable structure spreads throughout E(deltaP5abc) in seconds. Nevertheless, activity measurements show that the earliest detectable formation of native E(deltaP5abc) ribozyme is much slower (approximately 0.6 min(-1)), in a manner similar to that of the wild type. Also similar, only a small fraction of E(deltaP5abc) attains the native state on this time scale under standard conditions at 25 degrees C, whereas the remainder misfolds; footprinting experiments show that the misfolded conformer shares structural features with the long-lived misfolded conformer of the wild-type ribozyme. Thus, P5abc does not have a large overall effect on the rate-limiting step(s) along this pathway. However, once misfolded, E(deltaP5abc) refolds to the native state 80-fold faster than the wild-type ribozyme and is less accelerated by urea, indicating that P5abc stabilizes the misfolded structure relative to the less-ordered transition state for refolding. Together, the results suggest that, under these conditions, even the earliest tertiary folding intermediates of the wild-type ribozyme represent misfolded species and that P5abc is principally a liability during the tertiary folding process.