ClusPro FMFT-SAXS: Ultra-fast Filtering Using Small-Angle X-ray Scattering Data in Protein Docking

Is the BNT162b2 vaccine still effective against the latest variant: XBB.1.5?

Background

The XBB.1.5 sub-variant of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) Omicron now continues to spread rapidly due to the increased transmission rate as a result of increased affinity of the virus binding over the ACE-2 receptor - a gained property due to the mutation that occurred in spike protein.

Aim

The protectivity of BNT162b2 antibodies produced in the serum of patients is an important parameter for preventing transmission. However, the affinity of the antibodies of patients vaccinated with BNT162b2 over the latest SARS-CoV-2 variant, XBB.1.5, is not well established. This study aimed to evaluate the efficacy of the BNT162b2 vaccine-induced antibody on XBB.1.5 by comparing the X-ray crystallographic structures and spike protein mutations of BA.5 and XBB.1.5 using in silico methods.

Materials and Methods

Binding points and binding affinity values of the BNT162b2 antibody with BA.5 and XBB.1.5 spike protein were calculated using ClusPro 2.0 protein-protein docking and Discovery Studio 2021 Client software. Mutations in the genetic code of the spike protein for SARS-CoV-2 BA.5 and XBB.1.5 sub-variants were screened using the GISAID database.

Results

Binding affinity values showed that BNT162b2 had higher negative values in the XBB.1.5 sub-variant than BA.5 at the mutation sites at the binding region. The results suggested that BNT162b2 may retain its activity despite mutations and conformational changes in the binding site of the XBB.1.5.

Conclusion

The findings of this study shed light on the importance and usability of the current BNT162b2 vaccine for XBB.1.5 and future variants of concern.

Recent advances in structural characterization of biomacromolecules in foods via small-angle X-ray scattering

Small-angle X-ray scattering (SAXS) is a method for examining the solution structure, oligomeric state, conformational changes, and flexibility of biomacromolecules at a scale ranging from a few Angstroms to hundreds of nanometers. Wide time scales ranging from real time (milliseconds) to minutes can be also covered by SAXS. With many advantages, SAXS has been extensively used, it is widely used in the structural characterization of biomacromolecules in food science and technology. However, the application of SAXS in charactering the structure of food biomacromolecules has not been reviewed so far. In the current review, the principle, theoretical calculations and modeling programs are summarized, technical advances in the experimental setups and corresponding applications of in situ capabilities: combination of chromatography, time-resolved, temperature, pressure, flow-through are elaborated. Recent applications of SAXS for monitoring structural properties of biomacromolecules in food including protein, carbohydrate and lipid are also highlighted, and limitations and prospects for developing SAXS based on facility upgraded and artificial intelligence to study the structural properties of biomacromolecules are finally discussed. Future research should focus on extending machine time, simplifying SAXS data treatment, optimizing modeling methods in order to achieve an integrated structural biology based on SAXS as a practical tool for investigating the structure-function relationship of biomacromolecules in food industry.

Purification and characterization of inorganic pyrophosphatase for in vitro RNA transcription

Inorganic pyrophosphatase (iPPase) is an enzyme that cleaves pyrophosphate into two phosphate molecules. This enzyme is an essential component of in vitro transcription (IVT) reactions for RNA preparation as it prevents pyrophosphate from precipitating with magnesium, ultimately increasing the rate of the IVT reaction. Large-scale RNA production is often required for biochemical and biophysical characterization studies of RNA, therefore requiring large amounts of IVT reagents. Commercially purchased iPPase is often the most expensive component of any IVT reaction. In this paper, we demonstrate that iPPase can be produced in large quantities and high quality using a reasonably generic laboratory facility and that laboratory-purified iPPase is as effective as commercially available iPPase. Furthermore, using size exclusion chromatography coupled with multi-angle light scattering and dynamic light scattering, analytical ultracentrifugation, and small-angle X-ray scattering, we demonstrate that yeast iPPase can form tetramers and hexamers in solution as well as the enzymatically active dimer. Our work provides a robust protocol for laboratories involved with RNA in vitro transcription to efficiently produce active iPPase, significantly reducing the financial strain of large-scale RNA production.

Modeling and Structure Determination of Homo-Oligomeric Proteins: An Overview of Challenges and Current Approaches

Protein homo-oligomerization is a very common phenomenon, and approximately half of proteins form homo-oligomeric assemblies composed of identical subunits. The vast majority of such assemblies possess internal symmetry which can be either exploited to help or poses challenges during structure determination. Moreover, aspects of symmetry are critical in the modeling of protein homo-oligomers either by docking or by homology-based approaches. Here, we first provide a brief overview of the nature of protein homo-oligomerization. Next, we describe how the symmetry of homo-oligomers is addressed by crystallographic and non-crystallographic symmetry operations, and how biologically relevant intermolecular interactions can be deciphered from the ordered array of molecules within protein crystals. Additionally, we describe the most important aspects of protein homo-oligomerization in structure determination by NMR. Finally, we give an overview of approaches aimed at modeling homo-oligomers using computational methods that specifically address their internal symmetry and allow the incorporation of other experimental data as spatial restraints to achieve higher model reliability.

Prediction of Protein Complex Structure Using Surface-Induced Dissociation and Cryo-Electron Microscopy

A variety of techniques involving the use of mass spectrometry (MS) have been developed to obtain structural information on proteins and protein complexes. One example of these techniques, surface-induced dissociation (SID), has been used to study the oligomeric state and connectivity of protein complexes. Recently, we demonstrated that appearance energies (AE) could be extracted from SID experiments and that they correlate with structural features of specific protein-protein interfaces. While SID AE provides some structural information, the AE data alone are not sufficient to determine the structures of the complexes. For this reason, we sought to supplement the data with computational modeling, through protein-protein docking. In a previous study, we demonstrated that the scoring of structures generated from protein-protein docking could be improved with the inclusion of SID data; however, this work relied on knowledge of the correct tertiary structure and only built full complexes for a few cases. Here, we performed docking using input structures that require less prior knowledge, using homology models, unbound crystal structures, and bound+perturbed crystal structures. Using flexible ensemble docking (to build primarily subcomplexes from an ensemble of backbone structures), the RMSD₁₀₀ of all (15/15) predicted structures using the combined Rosetta, cryo-electron microscopy (cryo-EM), and SID score was less than 4 Å, compared to only 7/15 without SID and cryo-EM. Symmetric docking (which used symmetry to build full complexes) resulted in predicted structures with RMSD₁₀₀ less than 4 Å for 14/15 cases with experimental data, compared to only 5/15 without SID and cryo-EM. Finally, we also developed a confidence metric for which all (26/26) proteins flagged as high confidence were accurately predicted.

Hybrid methods for combined experimental and computational determination of protein structure

Knowledge of protein structure is paramount to the understanding of biological function, developing new therapeutics, and making detailed mechanistic hypotheses. Therefore, methods to accurately elucidate three-dimensional structures of proteins are in high demand. While there are a few experimental techniques that can routinely provide high-resolution structures, such as x-ray crystallography, nuclear magnetic resonance (NMR), and cryo-EM, which have been developed to determine the structures of proteins, these techniques each have shortcomings and thus cannot be used in all cases. However, additionally, a large number of experimental techniques that provide some structural information, but not enough to assign atomic positions with high certainty have been developed. These methods offer sparse experimental data, which can also be noisy and inaccurate in some instances. In cases where it is not possible to determine the structure of a protein experimentally, computational structure prediction methods can be used as an alternative. Although computational methods can be performed without any experimental data in a large number of studies, inclusion of sparse experimental data into these prediction methods has yielded significant improvement. In this Perspective, we cover many of the successes of integrative modeling, computational modeling with experimental data, specifically for protein folding, protein-protein docking, and molecular dynamics simulations. We describe methods that incorporate sparse data from cryo-EM, NMR, mass spectrometry, electron paramagnetic resonance, small-angle x-ray scattering, Förster resonance energy transfer, and genetic sequence covariation. Finally, we highlight some of the major challenges in the field as well as possible future directions.

Advances to tackle backbone flexibility in protein docking

Computational docking methods can provide structural models of protein-protein complexes, but protein backbone flexibility upon association often thwarts accurate predictions. In recent blind challenges, medium or high accuracy models were submitted in less than 20% of the 'difficult' targets (with significant backbone change or uncertainty). Here, we describe recent developments in protein-protein docking and highlight advances that tackle backbone flexibility. In molecular dynamics and Monte Carlo approaches, enhanced sampling techniques have reduced time-scale limitations. Internal coordinate formulations can now capture realistic motions of monomers and complexes using harmonic dynamics. And machine learning approaches adaptively guide docking trajectories or generate novel binding site predictions from deep neural networks trained on protein interfaces. These tools poise the field to break through the longstanding challenge of correctly predicting complex structures with significant conformational change.

Computational structure modeling for diverse categories of macromolecular interactions

Computational protein-protein docking is one of the most intensively studied topics in structural bioinformatics. The field has made substantial progress through over three decades of development. The development began with methods for rigid-body docking of two proteins, which have now been extended in different directions to cover the various macromolecular interactions observed in a cell. Here, we overview the recent developments of the variations of docking methods, including multiple protein docking, peptide-protein docking, and disordered protein docking methods.

Docking approaches for modeling multi-molecular assemblies

Computational docking approaches aim to overcome the limited availability of experimental structural data on protein-protein interactions, which are key in biology. The field is rapidly moving from the traditional docking methodologies for modeling of binary complexes to more integrative approaches using template-based, data-driven modeling of multi-molecular assemblies. We will review here the predictive capabilities of current docking methods in blind conditions, based on the results from the most recent community-wide blind experiments. Integration of template-based and ab initio docking approaches is emerging as the optimal strategy for modeling protein complexes and multimolecular assemblies. We will also review the new methodological advances on ab initio docking and integrative modeling.

Protein-Protein and Protein-Peptide Docking with ClusPro Server

The process of creating a model of the structure formed by a pair of interacting molecules is commonly referred to as docking. Protein docking is one of the most studied topics in computational and structural biology with applications to drug design and beyond. In this chapter, we describe ClusPro, a web server for protein-protein and protein-peptide docking. As an input, the server requires two Protein Data Bank (PDB) files (protein-protein mode) or a PDB file for the protein and a sequence for the ligand (protein-peptide mode). Its output consists of ten models of the resulting structure formed by the two objects upon interaction. The server typically produces results in less than 4 h. The server also provides tools (via "Advanced Options" list) for a user to fine-tune the results using any additional knowledge about the interaction process, e.g., small-angle X-ray scattering (SAXS) profile or distance restraints.

Template-based modeling by ClusPro in CASP13 and the potential for using co-evolutionary information in docking

As a participant in the joint CASP13-CAPRI46 assessment, the ClusPro server debuted its new template-based modeling functionality. The addition of this feature, called ClusPro TBM, was motivated by the previous CASP-CAPRI assessments and by the proven ability of template-based methods to produce higher-quality models, provided templates are available. In prior assessments, ClusPro submissions consisted of models that were produced via free docking of pre-generated homology models. This method was successful in terms of the number of acceptable predictions across targets; however, analysis of results showed that purely template-based methods produced a substantially higher number of medium-quality models for targets for which there were good templates available. The addition of template-based modeling has expanded ClusPro's ability to produce higher accuracy predictions, primarily for homomeric but also for some heteromeric targets. Here we review the newest additions to the ClusPro web server and discuss examples of CASP-CAPRI targets that continue to drive further development. We also describe ongoing work not yet implemented in the server. This includes the development of methods to improve template-based models and the use of co-evolutionary information for data-assisted free docking.

Protein ensembles link genotype to phenotype

Classically, phenotype is what is observed, and genotype is the genetic makeup. Statistical studies aim to project phenotypic likelihoods of genotypic patterns. The traditional genotype-to-phenotype theory embraces the view that the encoded protein shape together with gene expression level largely determines the resulting phenotypic trait. Here, we point out that the molecular biology revolution at the turn of the century explained that the gene encodes not one but ensembles of conformations, which in turn spell all possible gene-associated phenotypes. The significance of a dynamic ensemble view is in understanding the linkage between genetic change and the gained observable physical or biochemical characteristics. Thus, despite the transformative shift in our understanding of the basis of protein structure and function, the literature still commonly relates to the classical genotype-phenotype paradigm. This is important because an ensemble view clarifies how even seemingly small genetic alterations can lead to pleiotropic traits in adaptive evolution and in disease, why cellular pathways can be modified in monogenic and polygenic traits, and how the environment may tweak protein function.

What method to use for protein-protein docking?

A number of well-established servers perform 'free' docking of proteins of known structures. In contrast, template-based docking can start from sequences if structures are available for complexes that are homologous to the target. On the basis of the results of the CAPRI-CASP structure prediction experiments, template-based methods yield more accurate predictions if good templates can be found, but generally fail without such templates. However, free global docking, or focused docking around even poor quality template-based models, can still generate acceptable docked structures in these cases. In accordance with the analysis of a benchmark set, free docking of heterodimers yields acceptable or better predictions in the top 10 models for around 40% of structures. However, it is likely that a combination of template-based and free docking methods can perform better for targets that have template structures available. Another way of improving the reliability of predictions is adding experimental information as restraints, an option built into several docking servers.