Mechanics of the pulmonary valve in the aortic position

Tergitol Based Decellularization Protocol Improves the Prerequisites for Pulmonary Xenografts: Characterization and Biocompatibility Assessment

Right ventricle outflow tract obstruction (RVOTO) is a congenital pathological condition that contributes to about 15% of congenital heart diseases. In most cases, the replacement of the right ventricle outflow in pediatric age requires subsequent pulmonary valve replacement in adulthood. The aim of this study was to investigate the extracellular matrix scaffold obtained by decellularization of the porcine pulmonary valve using a new detergent (Tergitol) instead of Triton X-100. The decellularized scaffold was evaluated for the integrity of its extracellular matrix (ECM) structure by testing for its biochemical and mechanical properties, and the cytotoxicity/cytocompatibility of decellularized tissue was assessed using bone marrow-derived mesenchymal stem cells. We concluded that Tergitol could remove the nuclear material efficiently while preserving the structural proteins of the matrix, but without an efficient removal of the alpha-gal antigenic epitope. Therefore, Tergitol can be used as an alternative detergent to replace the Triton X-100.

Biomechanical Analysis of the Ross Procedure in an Ex Vivo Left Heart Simulator

BACKGROUND

Neo-aortic pulmonary autografts often experience root dilation and valve regurgitation over time. This study seeks to understand the biomechanical differences between aortic and neo-aortic pulmonary roots using a heart simulator.

METHODS

Porcine aortic, neo-aortic pulmonary, and pulmonary roots (n  =  6) were mounted in a heart simulator (parameters: 100 mm Hg, 37 °C, 70 cycles per minute, 5.0 L/min cardiac output). Echocardiography was used to study root distensibility (percentage change in luminal diameter between systole and diastole) and valve function. Leaflet motion was tracked with high-speed videography. After 30 min in the simulator, leaflet thickness (via cryosectioning), and multiaxial modulus (via lenticular hydrostatic deformation testing) were obtained.

RESULTS

There were no significant differences between aortic and neo-aortic pulmonary leaflet motion, including mean opening velocity (218 vs 248 mm/s, P  =  .27) or mean closing velocity (116 vs 157 mm/s, P  =  .12). Distensibility was similar between aortic (8.5%, 1.56 mm) and neo-aortic pulmonary (7.8%, 1.12 mm) roots (P  =  .59). Compared to virgin controls, native pulmonic roots exposed to systemic pressure for 30 min had reduced leaflet thickness (630 vs 385 µm, P  =  .049) and a reduced Young's modulus (3,125 vs 1,089 kPa, P  =  .077). In contrast, the aortic roots exposed to pressure displayed no significant difference in aortic leaflet thickness (1,317 vs 1,256 µm, P  =  .27) or modulus (5,931 vs 3,631 kPa, P  =  .56).

CONCLUSIONS

Neo-aortic pulmonary roots demonstrated equivalence in valve function and distensibility but did experience changes in biomechanical properties and morphology. These changes may contribute to long-term complications associated with the Ross procedure.

Understanding Pulmonary Autograft Remodeling After the Ross Procedure: Stick to the Facts

The Ross, or pulmonary autograft, procedure presents a fascinating mechanobiological scenario. Due to the common embryological origin of the aortic and pulmonary root, the conotruncus, several authors have hypothesized that a pulmonary autograft has the innate potential to remodel into an aortic phenotype once exposed to systemic conditions. Most of our understanding of pulmonary autograft mechanobiology stems from the remodeling observed in the arterial wall, rather than the valve, simply because there have been many opportunities to study the walls of dilated autografts explanted at reoperation. While previous histological studies provided important clues on autograft adaptation, a comprehensive understanding of its determinants and underlying mechanisms is needed so that the Ross procedure can become a widely accepted aortic valve substitute in select patients. It is clear that protecting the autograft during the early adaptation phase is crucial to avoid initiating a sequence of pathological remodeling. External support in the freestanding Ross procedure should aim to prevent dilatation while simultaneously promoting remodeling, rather than preventing dilatation at the cost of vascular atrophy. To define the optimal mechanical properties and geometry for external support, the ideal conditions for autograft remodeling and the timeline of mechanical adaptation must be determined. We aimed to rigorously review pulmonary autograft remodeling after the Ross procedure. Starting from the developmental, microstructural and biomechanical differences between the pulmonary artery and aorta, we review autograft mechanobiology in relation to distinct clinical failure mechanisms while aiming to identify unmet clinical needs, gaps in current knowledge and areas for further research. By correlating clinical and experimental observations of autograft remodeling with established principles in cardiovascular mechanobiology, we aim to present an up-to-date overview of all factors involved in extracellular matrix remodeling, their interactions and potential underlying molecular mechanisms.

De Novo Valve Tissue Morphology Following Bioscaffold Mitral Valve Replacement in a Juvenile Non-Human Primate Model

The utility of implanting a bioscaffold mitral valve consisting of porcine small intestinal submucosa (PSIS) in a juvenile baboon model (12 to 14 months old at the time of implant; n = 3) to assess their in vivo tissue remodeling responses was investigated. Our findings demonstrated that the PSIS mitral valve exhibited the robust presence of de novo extracellular matrix (ECM) at all explantation time points (at 3-, 11-, and 20-months). Apart from a significantly lower level of proteoglycans in the implanted valve’s annulus region (p < 0.05) at 3 months compared to the 11- and 20-month explants, there were no other significant differences (p > 0.05) found between any of the other principal valve ECM components (collagen and elastin) at the leaflet, annulus, or chordae tendinea locations, across these time points. In particular, neochordae tissue had formed, which seamlessly integrated with the native papillary muscles. However, additional processing will be required to trigger accelerated, uniform and complete valve ECM formation in the recipient. Regardless of the specific processing done to the bioscaffold valve, in this proof-of-concept study, we estimate that a 3-month window following bioscaffold valve replacement is the timeline in which complete regeneration of the valve and integration with the host needs to occur.

Narrative review of the contemporary surgical treatment of unicuspid aortic valve disease

Unicuspid aortic valve disease (UAVD) is a frequent and long-lasting challenge for adult congenital heart disease centers. UAVD patients become usually symptomatic in their twenties or thirties and require a surgical treatment plan which should respect their complete lifespan combined with an adequate quality of life. Unfortunately, all current surgical strategies of congenital aortic valve disease bear some important limitations: (I) Aortic valve replacement using bioprosthetic valves is associated with early structural degeneration and leads frequently to re-operations. (II) Mechanical valves are commonly associated with lifelong risk of severe bleeding due to oral anticoagulation. (III) Using a pulmonary autograft (i.e., Ross procedure) for aortic valve replacement is associated with excellent long-term results in non-elderly patients. However, failure of pulmonary autograft or pulmonary homograft may require re-operations. (IV) Aortic valve repair or Ozaki procedure is only performed in a few heart centers worldwide and is associated with a limited reproducibility and early patch degeneration, suture dehiscence or increased risk of endocarditis. In contrast to degenerative tricuspid aortic valve disease, UAVD remains relatively understudied and reports on UAVD treatment are rare and usually limited to retrospective single-center observations. For this review, we searched PubMed for papers in the English language by using the search words unicuspid aortic valve, congenital aortic valve, Ross procedure, Ozaki procedure, aortic valve repair, mechanical/bioprosthetic aortic replacement, homograft. We read the abstracts of relevant titles to confirm their relevance, and the full papers were then extracted. References from extracted papers were checked for additional relevant reports. This review summarizes current surgical treatment strategies for UAVD including aortic valve replacement using bioprosthetic or mechanical valves, homografts, pulmonary autografts (i.e., Ross procedure) and aortic valve repair techniques for UAV. Furthermore, Ozaki procedure will be discussed.

A geometric model for the human pulmonary valve in its fully open case

The human pulmonary valve, one of the key cardiac structures, plays an important role in circulatory system. However, there are few mathematical models to accurately simulate it. In this paper, we establish a geometric model of the normal human pulmonary valve from a mathematical perspective in the fully opening case. Based on the statistical data of the human pulmonary valves, we assume that the motions of the three cusps are symmetrical in the cardiac cycle. Thus, we first propose that each cusp is a part of the cylindrical shell according to its structure and physiological feature. The parameters for the pulmonary valve cusps in three-dimensional space are obtained by the fitting functions. We verify the accuracy of our results by comparing the areas of the pulmonary valve and pulmonary valve flap.

Quantification and comparison of the mechanical properties of four human cardiac valves

OBJECTIVE

Although having the same ability to permit unidirectional flow within the heart, the four main valves-the mitral valve (MV), aortic (AV), tricuspid (TV) and pulmonary (PV) valves-experience different loading conditions; thus, they exhibit different structural integrity from one another. Most research on heart valve mechanics have been conducted mainly on MV and AV or an individual valve, but none quantify and compare the mechanical and structural properties among the four valves from the same aged patient population whose death was unrelated to cardiovascular disease.

METHODS

A total of 114 valve leaflet samples were excised from 12 human cadavers whose death was unrelated to cardiovascular disease (70.1±3.7years old). Tissue mechanical and structural properties were characterized by planar biaxial mechanical testing and histological methods. The experimental data were then fitted with a Fung-type constitutive model.

RESULTS

The four valves differed substantially in thickness, degree of anisotropy, and stiffness. The leaflets of the left heart (the AV leaflets and the anterior mitral leaflets, AML) were significantly stiffer and less compliant than their counterparts in the right heart. TV leaflets were the most extensible and isotropic, while AML and AV leaflets were the least extensible and the most anisotropic. Age plays a significant role in the reduction of leaflet stiffness and extensibility with nearly straightened collagen fibers observed in the leaflet samples from elderly groups (65years and older).

CONCLUSIONS

Results from 114 human leaflet samples not only provided a baseline quantification of the mechanical properties of aged human cardiac valves, but also offered a better understanding of the age-dependent differences among the four valves. It is hoped that the experimental data collected and the associated constitutive models in this study can facilitate future studies of valve diseases, treatments and the development of interventional devices.

STATEMENT OF SIGNIFICANCE

Most research on heart valve mechanics have been conducted mainly on mitral and aortic valves or an individual valve, but none quantify and compare the mechanical and structural properties among the four valves from the same relatively healthy elderly patient population. In this study, the mechanical and microstructural properties of 114 leaflets of aortic, mitral, pulmonary and tricuspid valves from 12 human cadaver hearts were mechanically tested, analyzed and compared. Our results not only provided a baseline quantification of the mechanical properties of aged human valves, but a age range between patients (51-87years) also offers a better understanding of the age-dependent differences among the four valves. It is hoped that the obtained experimental data and associated constitutive parameters can facilitate studies of valve diseases, treatments and the development of interventional devices.

Age-Dependent Changes in Geometry, Tissue Composition and Mechanical Properties of Fetal to Adult Cryopreserved Human Heart Valves

There is limited information about age-specific structural and functional properties of human heart valves, while this information is key to the development and evaluation of living valve replacements for pediatric and adolescent patients. Here, we present an extended data set of structure-function properties of cryopreserved human pulmonary and aortic heart valves, providing age-specific information for living valve replacements. Tissue composition, morphology, mechanical properties, and maturation of leaflets from 16 pairs of structurally unaffected aortic and pulmonary valves of human donors (fetal-53 years) were analyzed. Interestingly, no major differences were observed between the aortic and pulmonary valves. Valve annulus and leaflet dimensions increase throughout life. The typical three-layered leaflet structure is present before birth, but becomes more distinct with age. After birth, cell numbers decrease rapidly, while remaining cells obtain a quiescent phenotype and reside in the ventricularis and spongiosa. With age and maturation-but more pronounced in aortic valves-the matrix shows an increasing amount of collagen and collagen cross-links and a reduction in glycosaminoglycans. These matrix changes correlate with increasing leaflet stiffness with age. Our data provide a new and comprehensive overview of the changes of structure-function properties of fetal to adult human semilunar heart valves that can be used to evaluate and optimize future therapies, such as tissue engineering of heart valves. Changing hemodynamic conditions with age can explain initial changes in matrix composition and consequent mechanical properties, but cannot explain the ongoing changes in valve dimensions and matrix composition at older age.

Material modeling of cardiac valve tissue: Experiments, constitutive analysis and numerical investigation

A key element of the cardiac cycle of the human heart is the opening and closing of the four valves. However, the material properties of the leaflet tissues, which fundamentally contribute to determine the mechanical response of the valves, are still an open field of research. The main contribution of the present study is to provide a complete experimental data set for porcine heart valve samples spanning all valve and leaflet types under tensile loading. The tests show a fair degree of reproducibility and are clearly indicative of a number of fundamental tissue properties, including a progressively stiffening response with increasing elongation. We then propose a simple anisotropic constitutive model, which is fitted to the experimental data set, showing a reasonable interspecimen variability. Furthermore, we present a dynamic finite element analysis of the aortic valve to show the direct usability of the obtained material parameters in computational simulations.

Growing matter: a review of growth in living systems

Living systems can grow, develop, adapt, and evolve. These phenomena are non-intuitive to traditional engineers and often difficult to understand. Yet, classical engineering tools can provide valuable insight into the mechanisms of growth in health and disease. Within the past decade, the concept of incompatible configurations has evolved as a powerful tool to model growing systems within the framework of nonlinear continuum mechanics. However, there is still a substantial disconnect between the individual disciplines, which explore the phenomenon of growth from different angles. Here we show that the nonlinear field theories of mechanics provide a unified concept to model finite growth by means of a single tensorial internal variable, the second order growth tensor. We review the literature and categorize existing growth models by means of two criteria: the microstructural appearance of growth, either isotropic or anisotropic; and the microenvironmental cues that drive the growth process, either chemical or mechanical. We demonstrate that this generic concept is applicable to a broad range of phenomena such as growing arteries, growing tumors, growing skin, growing airway walls, growing heart valve leaflets, growing skeletal muscle, growing plant stems, growing heart valve annuli, and growing cardiac muscle. The proposed approach has important biological and clinical applications in atherosclerosis, in-stent restenosis, tumor invasion, tissue expansion, chronic bronchitis, mitral regurgitation, limb lengthening, tendon tear, plant physiology, dilated and hypertrophic cardiomyopathy, and heart failure. Understanding the mechanisms of growth in these chronic conditions may open new avenues in medical device design and personalized medicine to surgically or pharmacologically manipulate development and alter, control, or revert disease progression.