Effect of phytic acid etchant on the structural stability of demineralized dentine and dentine bonding

Oracle of phytic acid in dental panacea - Insight into properties, therapeutic effect, regeneration, materials interaction and oral physiology

Phytic acid (inositol hexaphosphate/IP6) is a versatile chemical that is abundant in nature and is required for a variety of biological processes. It is harnessed in a wide range of fields, including drug discovery, daily supplies, chemical industries, medicine, and dentistry. IP6 is becoming increasingly popular in dentistry, with promising results. Several properties, such as cariostatic ability, beneficial impact on enamel disintegration, and anti-plaque, anti-tartar, and dental adhesive-forming properties, have been investigated thus far. Due to many constraints in the literature, there was a point in time when IP6 received less attention, which impacted knowledge in this field. Nevertheless, the positive outcomes of the flourishing of IP6 have recently been reconsidered from a number of papers that have improved our understanding of its modes of action in the aforementioned applications. The role of phytic acid in refining the properties and manoeuvring of dental resources is being investigated in novel endeavors in treating diseases of pulp and tissues supporting tooth structure, but to show its novel therapeutic potential, more precisely calibrated clinical trials are needed. This review examines and discusses the various uses proposed in the literature, as well as the applications of IP6 in dentistry.

Effect of Phytic Acid Etching and Airborne-Particle Abrasion Treatment on the Resin Bond Strength

Objective

This study aimed to evaluate the bond strength of a universal adhesive to dentin (μTBS) using different time periods of airborne particle abrasion (APA) and two types of acid etching.

Methods

Seventy-two human third molars were divided into 9 groups (n=8) according to dentin pretreatment: APA duration (0, 5, or 10s) and acid etching (no acid - NA, 37% phosphoric acid - PhoA, or 1% phytic acid - PhyA). APA was performed at a 0.5 cm distance and air pressure of 60 psi using 50 μm aluminum oxide particles. Afterwards, two coats of Single Bond Universal adhesive (3M) were applied to the dentin surface. Composite blocks were built using the incremental technique, sectioned into 1×1 mm slices and subjected to microtensile bond strength (μTBS) testing. Fracture patterns and surface topography of each dentinal pretreatment were evaluated using a Scanning electron microscope (SEM). Bond strength data were analyzed using two-way ANOVA and Bonferroni post-hoc tests.

Results

The group that received pretreatment with 5s APA and PhoA presented higher μTBS values among all groups, which was statistically different when compared with the PhoA, 10APA+PhoA, and 5APA+PhyA groups. PhyA did not significantly influence the bond strength of the air-abraded groups. Finally, adhesive failure was considered the predominant failure in all groups.

Conclusion

Dentin pretreated by airborne particle abrasion using aluminum oxide demonstrated an increase in bond strength when abraded for 5 seconds and conditioned with phosphoric acid in a universal adhesive system.

Effect of pretreatment of root dentin surface with cold atmospheric plasma on improving the bond strength of fiber post and resin cement: In vitro study

INTRODUCTION

Achieving stable adhesion between fiber post and interradicular dentin is a challenging process in the restoration of endodontically treated teeth. This study was conducted to investigate the effect of surface pretreatment with cold atmospheric plasma (CAP) on improving the bond strength between them.

MATERIALS AND METHODS

Forty-eight single-canal mandibular premolars were cut 1 mm above the cementoenamel junction to keep the root length of 14 mm or more. After endodontic treatment and preparation of the post space, the teeth were divided into four groups regarding the pretreatment of dentin surfaces, including normal saline, ethylenediaminetetraacetic acid (EDTA), CAP, and CAP + EDTA groups. The data were analyzed using paired and independent t-test and one-way analysis of variance and the significance level was set at p < .05.

RESULTS

The bond strength was significantly higher in the coronal third than in the apical third in all the groups. Moreover, the bond strength was significantly higher in the CAP + EDTA-treated group. The bond strength increased significantly in the CAP group compared to the normal saline group. In addition, the bond strength increased significantly in the CAP or EDTA groups compared to the control group. The lowest bond strength belonged to the control group (normal saline).

CONCLUSION

The surface pretreatment with CAP (alone or in combination with EDTA) played a significant role in improving the bond strength of fiber post and root canal dentin.

Application of Inositol Hexaphosphate and Inositol in Dental Medicine: An Overview

Phosphorylated inositol hexaphosphate (IP6) is a naturally occurring carbohydrate, and its parent compound, myoinositol (Ins), is abundantly present in plants, particularly in certain high-fiber diets, but also in mammalian cells, where they regulate essential cellular functions. IP6 has profound modulation effects on macrophages, which warrants further research on the therapeutic benefits of IP6 for inflammatory diseases. Here, we review IP6 as a promising compound that has the potential to be used in various areas of dentistry, including endodontics, restorative dentistry, implantology, and oral hygiene products, due to its unique structure and characteristic properties. Available as a dietary supplement, IP6 + Ins has been shown to enhance the anti-inflammatory effect associated with preventing and suppressing the progression of chronic dental inflammatory diseases. IP6 in dentistry is now substantial, and this narrative review presents and discusses the different applications proposed in the literature and gives insights into future use of IP6 in the fields of orthodontics, periodontics, implants, and pediatric dentistry.

Effect of phytic acid on dentinal collagen solubilization and its binding and debinding potentials to dentin

OBJECTIVES

To study phytic acid (IP6) effect on collagen solubilization by assessing hydroxyproline (HYP) release, evaluate its binding to demineralized (DD) and mineralized dentin (MD) and determine the effect of different media on debinding of IP6.

METHODS

Demineralized dentin beams were incubated in 1%, 2% or 3% IP6 and HYP release was evaluated at 1 or 3 weeks and compared to those obtained in untreated control or phosphoric acid (PA)-treated beams. DD or MD powder was treated with 1%, 2% or 3% IP6 and the decrease in IP6 amount was quantitated by ultraviolet-visible spectroscopy. IP6-treated samples were re-suspended in distilled water, ethanol, urea or sodium chloride and the amount of IP6 displaced was determined.

RESULTS

At 1 week, the control group and IP6 showed lower HYP release when compared to PA (P < 0.05). There was no difference among PA, IP6 and control at 3 weeks (P = 0.22). IP6 binding was concentration dependent. 1% IP6 had higher binding potential with MD compared to DD while 2% IP6 showed the opposite result (P<0.05). 3% IP6 had similar binding values between DD and MD (P = 0.53). The highest debinding in MD occurred with urea for 2%, 3% and 1% IP6 in descending manner. Within each concentration of IP6 in DD, the highest debinding effect was reported with ethanol.

CONCLUSIONS

IP6 bound to DD and MD in a concentration-dependent manner. IP6 was debound from DD mostly by the action of ethanol, while in MD, urea caused the most displacement. Collagen solubilization of IP6-treated DD was comparable to untreated DD.

CLINICAL SIGNIFICANCE

These findings add to the potential use of IP6 as an alternative to PA for dentin etching which possibly results in long-term stability of resin-dentin adhesion.

Ex-vivo study about antimicrobial effectiveness of phytic acid against Enterococcus faecalis into root canals

BACKGROUND

Endodontic failure is due to the persistence of microorganisms, especially Enterococcus faecalis, which have become resistant to disinfection measures. Sodium hypochlorite has been traditionally used, whereas phytic acid, a natural irrigant, needs to be further investigated.

METHODS

This ex-vivo study compared the antibacterial effectiveness of 0.9% saline solution, 5% sodium hypochlorite and 5% phytic acid against Enterococcus faecalis ATCC 29212 into the apical root canal third of 96 single-rooted extracted teeth, after 1-minute push-and-pull irrigation - a basic irrigation technique. Survived microorganisms were evaluated both through a traditional colony-forming-unit count and introducing the viability PCR, which precisely detects only DNA from intact cells: dead and damaged cells were excluded thanks to a propidium monoazide dye.

RESULTS

The culture methods showed that 5% sodium hypochlorite (median: 0 CFU/mL) has a significant greater antibacterial effectiveness (P<0.001) compared both to 0.9% saline solution (median: 4.76 CFU/mL) and 5% phytic acid (median: 0.25 CFU/mL). However, 5% phytic acid proved to be significantly more effective (P<0.001) than 0.9% saline solution. The viability PCR did not reveal a significant difference between 5% sodium hypochlorite (median: 4.12×10⁴ survived bacteria) and 0.9% saline solution (median: 8.45×10⁴ survived bacteria). Five percent phytic acid (median: 0.83×10⁴ survived bacteria) was significantly more effective than both 0.9% saline solution (P<0.001) and 5% sodium hypochlorite (P<0.001).

CONCLUSIONS

The findings suggest that 5% phytic acid works against root canal bacteria even with a basic irrigation technique and viability PCR seems to lead to more reliable and sensitive data rather than the culture methods.

Effect of phytic acid on bond strength and interfacial integrity of universal adhesive to deep dentin

Abstract This study investigated the effect of phytic acid (IP6) in different concentrations and application times on microtensile bond strength (µTBS) and interfacial integrity of universal adhesive to deep dentin. Flat deep dentin surfaces of 48 human molars were either etched with 37% phosphoric acid (PA) for 15 sec (control); or received no acid treatment and universal adhesive was applied directly in a self-etch mode (SE); or divided according to IP6 concentration (C) into two main groups: C1, 0.5%, and C2, 1%. Specimens of IP6 groups were further subdivided into three subgroups according to application time of IP6 (T) where; T1, 15 sec; T2, 30 sec and T3, 60 sec. Single Bond Universal Adhesive was then applied and resin composite blocks were built-up. Forty Specimens were then sectioned to produce resin/dentin beams that were used for µTBS testing using a universal testing machine. The remaining eight specimens were sectioned into slabs that were immersed into ammonical silver nitrate solution and nanoleakage was observed using a field emission scanning electron microscope (FE-SEM). The results showed that the application of IP6 in 0.5% and 1% produced significantly higher µTBS and less nanoleakage compared to PA and SE groups. Also, the application of IP6 for 60 sec recorded the highest µTBS and the lowest nanoleakage followed by 30 sec, and 15 sec respectively. Therefore, conditioning of deep dentin with IP6 enhances µTBS and interfacial integrity of universal adhesive to deep dentin in comparison to PA etching or using the universal adhesive in SE mode.

Effect of smear layer removal agents on the microhardness and roughness of radicular dentin

Purpose

To evaluate the effect of phytic acid (IP6) on the surface roughness and microhardness of human root canal dentin and compare it to other smear layer removal agents.

Materials and methods

Fifty extracted human maxillary incisors were sectioned longitudinally into a total of 100 specimens followed by embedding in auto-polymerizing acrylic resin. The specimens were polished and then randomly divided into five groups (n = 20) according to the test solution used to condition root canal dentin: 17% ethylenediaminetetraacetic acid (EDTA); 10% citric acid (CA); 1% IP6; 37% phosphoric acid (PA); or distilled water (control group). Each specimen was treated with a total volume of 1 ml of each solution for 1 min with agitation. Each group was then divided into two subgroups of 10 specimens each. The specimens of the first subgroup were used to determine microhardness, using Vickers hardness tester, and the specimens of the second subgroup were used to measure surface roughness, using a confocal laser scanning microscope. The results were analyzed statistically using one-way ANOVA and Tukey tests, α = 0.05.

Results

All the tested groups exhibited microhardness and surface roughness values that were statistically significantly different when compared with the control group (P < 0.05). The microhardness value obtained with IP6 was significantly lower when compared to EDTA, CA, and the control group, whereas its roughness value was significantly higher compared to the aforementioned groups. However, there was no significant difference between IP6 and PA (P > 0.05).

Conclusions

IP6 and PA showed the lowest microhardness and the highest surface roughness values.

Recent insights on tea metabolites, their biosynthesis and chemo-preventing effects: A review

Tea manufactured from the cultivated shoots of Camellia sinensis (L.) O. Kuntze is the most commonly consumed nonalcoholic drink around the world. Tea is an agro-based, environmentally sustainable, labor-intensive, job-generating, and export-oriented industry in many countries. Tea includes phenolic compounds, flavonoids, alkaloids, vitamins, enzymes, crude fibers, protein, lipids, and carbohydrates, among other biochemical constituents. This review described the nature of tea metabolites, their biosynthesis and accumulation with response to various factors. The therapeutic application of various metabolites of tea against microbial diseases, cancer, neurological, and other metabolic disorders was also discussed in detail. The seasonal variation, cultivation practices and genetic variability influence tea metabolite synthesis. Tea biochemical constituents, especially polyphenols and its integral part catechin metabolites, are broadly focused on potential applicability for their action against various diseases. In addition to this, tea also contains bioactive flavonoids that possess health-beneficial effects. The catechin fractions, epigallocatechin 3-gallate and epicatechin 3-gallate, are the main components of tea that has strong antioxidant and medicinal properties. The synergistic function of natural tea metabolites with synthetic drugs provides effective protection against various diseases. Furthermore, the application of nanotechnologies enhanced bioavailability, enhancing the therapeutic potential of natural metabolites against numerous diseases and pathogens.

The effect of phytic acid on enzymatic degradation of dentin

We evaluated the effect of phytic acid on matrix metalloproteinase (MMP)- or cysteine cathepsin (CC)-mediated dentin degradation. Demineralized dentin beams were divided into five groups (n = 12) and treated with 1%, 2%, or 3% phytic acid or with 37% phosphoric acid. Untreated demineralized beams served as controls. After incubation for 1 or 3 wk, dry mass loss was determined and aliquots of incubation media were analysed for cross-linked telopeptide of type I collagen (ICTP) fragments for MMP-mediated and c-terminal telopeptide of type I collagen (CTX) for cathepsin-k-mediated degradation. The direct effect of phytic acid was evaluated using MMP activity assay. Data were analysed using repeated-measures anova. ICTP releases with 1% and 2% phytic acid treatment were statistically significantly lower than those following phosphoric acid treatment at 3 wk. The CTX release for phytic acid-treated beams at 3 wk was not significantly different from that of untreated control beams, but it was significantly lower than that of phosphoric acid-treated beams. Their MMP activities at 3 wk were not significantly different from those of the controls but they were significantly lower than those seen for phosphoric acid-treated beams. Compared to phosphoric acid, phytic acid treatment resulted in a reduced dentinal host-derived endogenous enzymatic activity and collagen degradation.

Effect of phytic acid as an endodontic chelator on resin adhesion to sodium hypochlorite-treated dentin

Objectives

Phytic acid (IP6), a naturally occurring agent, has been previously reported as a potential alternative to ethylenediaminetetraacetic acid (EDTA). However, its effect on adhesion to sodium hypochlorite (NaOCl)-treated dentin and its interactions with NaOCl have not been previously reported. Thus, in this study, the effects of IP6 on resin adhesion to NaOCl-treated dentin and the failure mode were investigated and the interactions between the used agents were analyzed.

Materials and Methods

Micro-tensile bond strength (µTBS) testing was performed until failure on dentin treated with either distilled water (control), 5% NaOCl, or 5% NaOCl followed with chelators: 17% EDTA for 1 minute or 1% IP6 for 30 seconds or 1 minute. The failed specimens were assessed under a scanning electron microscope. The reaction of NaOCl with EDTA or IP6 was analyzed in terms of temperature, pH, effervescence, and chlorine odor, and the effects of the resulting mixtures on the color of a stained paper were recorded.

Results

The µTBS values of the control and NaOCl with chelator groups were not significantly different, but were all significantly higher than that of the group treated with NaOCl only. In the failure analysis, a distinctive feature was the presence of resin tags in samples conditioned with IP6 after treatment with NaOCl. The reaction of 1% IP6 with 5% NaOCl was less aggressive than the reaction of the latter with 17% EDTA.

Conclusions

IP6 reversed the adverse effects of NaOCl on resin-dentin adhesion without the chlorine-depleting effect of EDTA.

Novel Biomedical Applications of Crosslinked Collagen

Collagen is one of the most useful biopolymers because of its low immunogenicity and biocompatibility. The biomedical potential of natural collagen is limited by its poor mechanical strength, thermal stability, and enzyme resistance, but exogenous chemical, physical, or biological crosslinks have been used to modify the molecular structure of collagen to minimize degradation and enhance mechanical stability. Although crosslinked collagen-based materials have been widely used in biomedicine, there is no standard crosslinking protocol that can achieve a perfect balance between stability and functional remodeling of collagen. Understanding the role of crosslinking agents in the modification of collagen performance and their potential biomedical applications are crucial for developing novel collagen-based biopolymers for therapeutic gain.

Polyphenol uses in biomaterials engineering

Polyphenols are micronutrients obtained from diet that have been suggested to play an important role in health. The health benefits of polyphenols and their protective effects in food systems as antioxidant compounds are well known and have been extensively investigated. However, their functional roles as a "processing cofactor" in tissue engineering applications are less widely known. This review focuses on the functionality of polyphenols and their application in biomaterials. Polyphenols have been used to stabilize collagen and to improve its resistance to degradation in biological systems. Therefore, they have been proposed to improve the performance of biomedical devices used in cardiovascular systems by improving the mechanical properties of grafted heart valves, enhancing microcirculation through the relaxation of the arterial walls and improving the capillary blood flow and pressure resistance. Polyphenols have been found to stimulate bone formation, mineralization, as well as the proliferation, differentiation, and the survival of osteoblasts. These effects are brought about by the stimulatory effect of polyphenols on osteoblast cells and their protective effect against oxidative stress and inflammatory cytokines. In addition, polyphenols inhibit the differentiation of the osteoclast cells. Collectively, these actions lead to promote bone formation and to reduce bone resorption, respectively. Moreover, polyphenols can increase the cross-linking of dentine and hence its mechanical stability. Overall, polyphenols provide interesting properties that will stimulate further research in the bioengineering field.